[PATCH net-next v2 07/12] net: stmmac: replace the vlan_fail_q_en field with a flag

From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Vinod Koul <vkoul@kernel.org>,
	Bhupesh Sharma <bhupesh.sharma@linaro.org>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <andersson@kernel.org>,
	Konrad Dybcio <konrad.dybcio@linaro.org>,
	"David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>,
	Andrew Halaney <ahalaney@redhat.com>
Cc: netdev@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Subject: [PATCH net-next v2 07/12] net: stmmac: replace the vlan_fail_q_en field with a flag
Date: Fri, 23 Jun 2023 12:08:40 +0200	[thread overview]
Message-ID: <20230623100845.114085-8-brgl@bgdev.pl> (raw)
In-Reply-To: <20230623100845.114085-1-brgl@bgdev.pl>

From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

Drop the boolean field of the plat_stmmacenet_data structure in favor of a
simple bitfield flag.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c | 2 +-
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 3 ++-
 include/linux/stmmac.h                            | 2 +-
 3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
index faa6f4ec6838..1f1bc99571a5 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-intel.c
@@ -560,7 +560,7 @@ static int intel_mgbe_common_data(struct pci_dev *pdev,
 	/* Set the maxmtu to a default of JUMBO_LEN */
 	plat->maxmtu = JUMBO_LEN;
 
-	plat->vlan_fail_q_en = true;
+	plat->flags |= STMMAC_FLAG_VLAN_FAIL_Q_EN;
 
 	/* Use the last Rx queue */
 	plat->vlan_fail_q = plat->rx_queues_to_use - 1;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d444514db07e..c5763f60c6ef 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -6923,7 +6923,8 @@ static int stmmac_hw_init(struct stmmac_priv *priv)
 	if (priv->dma_cap.tsoen)
 		dev_info(priv->device, "TSO supported\n");
 
-	priv->hw->vlan_fail_q_en = priv->plat->vlan_fail_q_en;
+	priv->hw->vlan_fail_q_en =
+		(priv->plat->flags & STMMAC_FLAG_VLAN_FAIL_Q_EN);
 	priv->hw->vlan_fail_q = priv->plat->vlan_fail_q;
 
 	/* Run HW quirks, if any */
diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h
index aeb3e75dc748..155cb11b1c8a 100644
--- a/include/linux/stmmac.h
+++ b/include/linux/stmmac.h
@@ -210,6 +210,7 @@ struct dwmac4_addrs {
 #define STMMAC_FLAG_HAS_SUN8I			BIT(3)
 #define STMMAC_FLAG_TSO_EN			BIT(4)
 #define STMMAC_FLAG_SERDES_UP_AFTER_PHY_LINKUP	BIT(5)
+#define STMMAC_FLAG_VLAN_FAIL_Q_EN		BIT(6)
 
 struct plat_stmmacenet_data {
 	int bus_id;
@@ -278,7 +279,6 @@ struct plat_stmmacenet_data {
 	bool en_tx_lpi_clockgating;
 	bool rx_clk_runs_in_lpi;
 	int has_xgmac;
-	bool vlan_fail_q_en;
 	u8 vlan_fail_q;
 	unsigned int eee_usecs_rate;
 	struct pci_dev *pdev;
-- 
2.39.2

