From: David Howells <dhowells@redhat.com>
To: netdev@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>,
Alexander Duyck <alexander.duyck@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Willem de Bruijn <willemdebruijn.kernel@gmail.com>,
David Ahern <dsahern@kernel.org>,
Matthew Wilcox <willy@infradead.org>,
Jens Axboe <axboe@kernel.dk>,
linux-mm@kvack.org, linux-kernel@vger.kernel.org,
Ilya Dryomov <idryomov@gmail.com>, Xiubo Li <xiubli@redhat.com>,
Jeff Layton <jlayton@kernel.org>,
ceph-devel@vger.kernel.org
Subject: [PATCH net-next v5 03/16] ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage
Date: Fri, 23 Jun 2023 23:55:00 +0100 [thread overview]
Message-ID: <20230623225513.2732256-4-dhowells@redhat.com> (raw)
In-Reply-To: <20230623225513.2732256-1-dhowells@redhat.com>
Use sendmsg() and MSG_SPLICE_PAGES rather than sendpage in ceph when
transmitting data. For the moment, this can only transmit one page at a
time because of the architecture of net/ceph/, but if
write_partial_message_data() can be given a bvec[] at a time by the
iteration code, this would allow pages to be sent in a batch.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Ilya Dryomov <idryomov@gmail.com>
cc: Xiubo Li <xiubli@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: Jens Axboe <axboe@kernel.dk>
cc: Matthew Wilcox <willy@infradead.org>
cc: ceph-devel@vger.kernel.org
cc: netdev@vger.kernel.org
---
Notes:
ver #5)
- Switch condition for setting MSG_MORE in write_partial_message_data()
net/ceph/messenger_v1.c | 60 ++++++++++++++---------------------------
1 file changed, 20 insertions(+), 40 deletions(-)
diff --git a/net/ceph/messenger_v1.c b/net/ceph/messenger_v1.c
index d664cb1593a7..814579f27f04 100644
--- a/net/ceph/messenger_v1.c
+++ b/net/ceph/messenger_v1.c
@@ -74,37 +74,6 @@ static int ceph_tcp_sendmsg(struct socket *sock, struct kvec *iov,
return r;
}
-/*
- * @more: either or both of MSG_MORE and MSG_SENDPAGE_NOTLAST
- */
-static int ceph_tcp_sendpage(struct socket *sock, struct page *page,
- int offset, size_t size, int more)
-{
- ssize_t (*sendpage)(struct socket *sock, struct page *page,
- int offset, size_t size, int flags);
- int flags = MSG_DONTWAIT | MSG_NOSIGNAL | more;
- int ret;
-
- /*
- * sendpage cannot properly handle pages with page_count == 0,
- * we need to fall back to sendmsg if that's the case.
- *
- * Same goes for slab pages: skb_can_coalesce() allows
- * coalescing neighboring slab objects into a single frag which
- * triggers one of hardened usercopy checks.
- */
- if (sendpage_ok(page))
- sendpage = sock->ops->sendpage;
- else
- sendpage = sock_no_sendpage;
-
- ret = sendpage(sock, page, offset, size, flags);
- if (ret == -EAGAIN)
- ret = 0;
-
- return ret;
-}
-
static void con_out_kvec_reset(struct ceph_connection *con)
{
BUG_ON(con->v1.out_skip);
@@ -464,7 +433,6 @@ static int write_partial_message_data(struct ceph_connection *con)
struct ceph_msg *msg = con->out_msg;
struct ceph_msg_data_cursor *cursor = &msg->cursor;
bool do_datacrc = !ceph_test_opt(from_msgr(con->msgr), NOCRC);
- int more = MSG_MORE | MSG_SENDPAGE_NOTLAST;
u32 crc;
dout("%s %p msg %p\n", __func__, con, msg);
@@ -482,6 +450,10 @@ static int write_partial_message_data(struct ceph_connection *con)
*/
crc = do_datacrc ? le32_to_cpu(msg->footer.data_crc) : 0;
while (cursor->total_resid) {
+ struct bio_vec bvec;
+ struct msghdr msghdr = {
+ .msg_flags = MSG_SPLICE_PAGES,
+ };
struct page *page;
size_t page_offset;
size_t length;
@@ -493,10 +465,13 @@ static int write_partial_message_data(struct ceph_connection *con)
}
page = ceph_msg_data_next(cursor, &page_offset, &length);
- if (length == cursor->total_resid)
- more = MSG_MORE;
- ret = ceph_tcp_sendpage(con->sock, page, page_offset, length,
- more);
+ if (length != cursor->total_resid)
+ msghdr.msg_flags |= MSG_MORE;
+
+ bvec_set_page(&bvec, page, length, page_offset);
+ iov_iter_bvec(&msghdr.msg_iter, ITER_SOURCE, &bvec, 1, length);
+
+ ret = sock_sendmsg(con->sock, &msghdr);
if (ret <= 0) {
if (do_datacrc)
msg->footer.data_crc = cpu_to_le32(crc);
@@ -526,7 +501,10 @@ static int write_partial_message_data(struct ceph_connection *con)
*/
static int write_partial_skip(struct ceph_connection *con)
{
- int more = MSG_MORE | MSG_SENDPAGE_NOTLAST;
+ struct bio_vec bvec;
+ struct msghdr msghdr = {
+ .msg_flags = MSG_SPLICE_PAGES | MSG_MORE,
+ };
int ret;
dout("%s %p %d left\n", __func__, con, con->v1.out_skip);
@@ -534,9 +512,11 @@ static int write_partial_skip(struct ceph_connection *con)
size_t size = min(con->v1.out_skip, (int)PAGE_SIZE);
if (size == con->v1.out_skip)
- more = MSG_MORE;
- ret = ceph_tcp_sendpage(con->sock, ceph_zero_page, 0, size,
- more);
+ msghdr.msg_flags &= ~MSG_MORE;
+ bvec_set_page(&bvec, ZERO_PAGE(0), size, 0);
+ iov_iter_bvec(&msghdr.msg_iter, ITER_SOURCE, &bvec, 1, size);
+
+ ret = sock_sendmsg(con->sock, &msghdr);
if (ret <= 0)
goto out;
con->v1.out_skip -= ret;
next prev parent reply other threads:[~2023-06-23 22:56 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-23 22:54 [PATCH net-next v5 00/16] splice, net: Switch over users of sendpage() and remove it David Howells
2023-06-23 22:54 ` [PATCH net-next v5 01/16] tcp_bpf, smc, tls, espintcp, siw: Reduce MSG_SENDPAGE_NOTLAST usage David Howells
2023-06-23 22:54 ` [PATCH net-next v5 02/16] net: Use sendmsg(MSG_SPLICE_PAGES) not sendpage in skb_send_sock() David Howells
2023-06-23 22:55 ` David Howells [this message]
2023-06-25 12:20 ` [PATCH net-next v5 03/16] ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage Ilya Dryomov
2023-06-26 14:00 ` David Howells
2023-06-26 15:41 ` Ilya Dryomov
2023-06-26 16:44 ` David Howells
2023-06-26 15:12 ` David Howells
2023-06-26 15:52 ` Ilya Dryomov
2023-06-23 22:55 ` [PATCH net-next v5 04/16] ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() David Howells
2023-06-25 12:34 ` Ilya Dryomov
2023-06-26 15:30 ` David Howells
2023-06-26 16:07 ` Ilya Dryomov
2023-06-26 17:01 ` David Howells
2023-06-23 22:55 ` [PATCH net-next v5 05/16] rds: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage David Howells
2023-06-23 22:55 ` [Cluster-devel] [PATCH net-next v5 06/16] dlm: " David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` [PATCH net-next v5 07/16] nvme-tcp: Use sendmsg(MSG_SPLICE_PAGES) rather then sendpage David Howells
2023-06-23 22:55 ` [PATCH net-next v5 08/16] nvmet-tcp: " David Howells
2023-06-23 22:55 ` [PATCH net-next v5 09/16] smc: Drop smc_sendpage() in favour of smc_sendmsg() + MSG_SPLICE_PAGES David Howells
2023-06-23 22:55 ` [PATCH net-next v5 10/16] drbd: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() David Howells
2023-06-23 22:55 ` [Drbd-dev] " David Howells
2023-06-23 22:55 ` [PATCH net-next v5 11/16] scsi: iscsi_tcp: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage David Howells
2023-06-27 19:02 ` Chris Leech
2023-06-23 22:55 ` [PATCH net-next v5 12/16] scsi: target: iscsi: " David Howells
2023-06-23 22:55 ` [Ocfs2-devel] [PATCH net-next v5 13/16] ocfs2: Fix use of slab data with sendpage David Howells via Ocfs2-devel
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` [Ocfs2-devel] [PATCH net-next v5 14/16] ocfs2: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage() David Howells via Ocfs2-devel
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` [PATCH net-next v5 15/16] sock: Remove ->sendpage*() in favour of sendmsg(MSG_SPLICE_PAGES) David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` [PATCH net-next v5 16/16] net: Kill MSG_SENDPAGE_NOTLAST David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` David Howells
2023-06-23 22:55 ` David Howells
2023-06-24 23:00 ` [PATCH net-next v5 00/16] splice, net: Switch over users of sendpage() and remove it patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230623225513.2732256-4-dhowells@redhat.com \
--to=dhowells@redhat.com \
--cc=alexander.duyck@gmail.com \
--cc=axboe@kernel.dk \
--cc=ceph-devel@vger.kernel.org \
--cc=davem@davemloft.net \
--cc=dsahern@kernel.org \
--cc=edumazet@google.com \
--cc=idryomov@gmail.com \
--cc=jlayton@kernel.org \
--cc=kuba@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=willemdebruijn.kernel@gmail.com \
--cc=willy@infradead.org \
--cc=xiubli@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.