From: Pawel Dembicki <paweldembicki@gmail.com>
To: netdev@vger.kernel.org
Cc: Pawel Dembicki <paweldembicki@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 3/7] net: dsa: vsc73xx: add port_stp_state_set function
Date: Sun, 25 Jun 2023 13:53:38 +0200 [thread overview]
Message-ID: <20230625115343.1603330-3-paweldembicki@gmail.com> (raw)
In-Reply-To: <20230625115343.1603330-1-paweldembicki@gmail.com>
This isn't fully functional implementation of 802.1D, but
port_stp_state_set is required for future tag8021q operations.
This implementation handle properly all states, but vsc 73xx don't
forward STP packets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v2:
- fix kdoc
drivers/net/dsa/vitesse-vsc73xx-core.c | 51 +++++++++++++++++++++++---
drivers/net/dsa/vitesse-vsc73xx.h | 2 +
2 files changed, 47 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index 221672b9e17f..f123ce2ed244 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -164,6 +164,10 @@
#define VSC73XX_AGENCTRL 0xf0
#define VSC73XX_CAPRST 0xff
+#define VSC73XX_SRCMASKS_CPU_COPY BIT(27)
+#define VSC73XX_SRCMASKS_MIRROR BIT(26)
+#define VSC73XX_SRCMASKS_PORTS_MASK GENMASK(7, 0)
+
#define VSC73XX_MACACCESS_CPU_COPY BIT(14)
#define VSC73XX_MACACCESS_FWD_KILL BIT(13)
#define VSC73XX_MACACCESS_IGNORE_VLAN BIT(12)
@@ -620,15 +624,17 @@ static int vsc73xx_setup(struct dsa_switch *ds)
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GMIIDELAY,
VSC73XX_GMIIDELAY_GMII0_GTXDELAY_2_0_NS |
VSC73XX_GMIIDELAY_GMII0_RXDELAY_2_0_NS);
- /* Enable reception of frames on all ports */
- vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_RECVMASK,
- 0x5f);
/* IP multicast flood mask (table 144) */
vsc73xx_write(vsc, VSC73XX_BLOCK_ANALYZER, 0, VSC73XX_IFLODMSK,
0xff);
mdelay(50);
+ /*configure forward map to CPU <-> port only*/
+ for (i = 0; i < vsc->ds->num_ports; i++)
+ vsc->forward_map[i] = VSC73XX_SRCMASKS_PORTS_MASK & BIT(CPU_PORT);
+ vsc->forward_map[CPU_PORT] = VSC73XX_SRCMASKS_PORTS_MASK & ~BIT(CPU_PORT);
+
/* Release reset from the internal PHYs */
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
VSC73XX_GLORESET_PHY_RESET);
@@ -871,9 +877,6 @@ static void vsc73xx_phylink_mac_link_up(struct dsa_switch *ds, int port,
if (duplex == DUPLEX_FULL)
val |= VSC73XX_MAC_CFG_FDX;
- /* Enable port (forwarding) in the receieve mask */
- vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
- VSC73XX_RECVMASK, BIT(port), BIT(port));
vsc73xx_adjust_enable_port(vsc, port, val);
}
@@ -1040,6 +1043,41 @@ static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
return 9600;
}
+static void vsc73xx_port_stp_state_set(struct dsa_switch *ds, int port,
+ u8 state)
+{
+ struct vsc73xx *vsc = ds->priv;
+ /* FIXME: STP frames isn't forwarded at this moment. BPDU frames are
+ * forwarded only from to PI/SI interface. For more info see chapter
+ * 2.7.1 (CPU Forwarding) in datasheet.
+ * This function is required for tag8021q operations.
+ */
+
+ if (state == BR_STATE_BLOCKING)
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), 0);
+ else
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_RECVMASK, BIT(port), BIT(port));
+
+ if (state == BR_STATE_LEARNING || state == BR_STATE_FORWARDING)
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_LEARNMASK, BIT(port), BIT(port));
+ else
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_LEARNMASK, BIT(port), 0);
+
+ if (state == BR_STATE_FORWARDING)
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_SRCMASKS + port,
+ VSC73XX_SRCMASKS_PORTS_MASK,
+ vsc->forward_map[port]);
+ else
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_SRCMASKS + port,
+ VSC73XX_SRCMASKS_PORTS_MASK, 0);
+}
+
static const struct dsa_switch_ops vsc73xx_ds_ops = {
.get_tag_protocol = vsc73xx_get_tag_protocol,
.setup = vsc73xx_setup,
@@ -1056,6 +1094,7 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
.port_disable = vsc73xx_port_disable,
.port_change_mtu = vsc73xx_change_mtu,
.port_max_mtu = vsc73xx_get_max_mtu,
+ .port_stp_state_set = vsc73xx_port_stp_state_set,
};
static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
diff --git a/drivers/net/dsa/vitesse-vsc73xx.h b/drivers/net/dsa/vitesse-vsc73xx.h
index 30b1f0a36566..c4d5398edeeb 100644
--- a/drivers/net/dsa/vitesse-vsc73xx.h
+++ b/drivers/net/dsa/vitesse-vsc73xx.h
@@ -5,6 +5,7 @@
/**
* struct vsc73xx - VSC73xx state container
+ * @forward_map: Forward table cache
*/
struct vsc73xx {
struct device *dev;
@@ -15,6 +16,7 @@ struct vsc73xx {
u8 addr[ETH_ALEN];
const struct vsc73xx_ops *ops;
void *priv;
+ u8 forward_map[8];
};
struct vsc73xx_ops {
--
2.34.1
next prev parent reply other threads:[~2023-06-25 11:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-25 11:53 [PATCH net-next v2 1/7] net: dsa: vsc73xx: use read_poll_timeout instead delay loop Pawel Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 2/7] net: dsa: vsc73xx: convert to PHYLINK Pawel Dembicki
2023-06-25 11:53 ` Pawel Dembicki [this message]
2023-06-25 12:09 ` [PATCH net-next v2 3/7] net: dsa: vsc73xx: add port_stp_state_set function Vladimir Oltean
2023-06-25 11:53 ` [PATCH net-next v2 4/7] net: dsa: vsc73xx: Add dsa tagging based on 8021q Pawel Dembicki
2023-06-25 12:42 ` Simon Horman
2023-06-26 10:37 ` Dan Carpenter
2023-06-25 12:47 ` Vladimir Oltean
2023-06-29 21:00 ` Paweł Dembicki
2023-07-03 16:16 ` Vladimir Oltean
2023-06-25 11:53 ` [PATCH net-next v2 5/7] net: dsa: vsc73xx: Add bridge support Pawel Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 6/7] net: dsa: vsc73xx: Add vlan filtering Pawel Dembicki
2023-06-25 15:05 ` Vladimir Oltean
2023-06-29 20:18 ` Paweł Dembicki
2023-07-03 16:55 ` Vladimir Oltean
2023-06-25 11:53 ` [PATCH net-next v2 7/7] net: dsa: vsc73xx: fix MTU configuration Pawel Dembicki
2023-06-25 14:54 ` Vladimir Oltean
2023-06-28 20:04 ` Paweł Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 0/7] net: dsa: vsc73xx: Make vsc73xx usable Pawel Dembicki
2023-06-25 14:42 ` Vladimir Oltean
2023-06-25 15:07 ` [PATCH net-next v2 1/7] net: dsa: vsc73xx: use read_poll_timeout instead delay loop Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230625115343.1603330-3-paweldembicki@gmail.com \
--to=paweldembicki@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.