From: Pawel Dembicki <paweldembicki@gmail.com>
To: netdev@vger.kernel.org
Cc: Pawel Dembicki <paweldembicki@gmail.com>,
Linus Walleij <linus.walleij@linaro.org>,
Andrew Lunn <andrew@lunn.ch>,
Florian Fainelli <f.fainelli@gmail.com>,
Vladimir Oltean <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
linux-kernel@vger.kernel.org
Subject: [PATCH net-next v2 5/7] net: dsa: vsc73xx: Add bridge support
Date: Sun, 25 Jun 2023 13:53:40 +0200 [thread overview]
Message-ID: <20230625115343.1603330-5-paweldembicki@gmail.com> (raw)
In-Reply-To: <20230625115343.1603330-1-paweldembicki@gmail.com>
This patch adds bridge support for vsc73xx driver.
It introduce two functions for port_bridge_join and
vsc73xx_port_bridge_leave handling.
Those functions implement forwarding adjust and use
dsa_tag_8021q_bridge_* api for adjust VLAN configuration.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
---
v2:
- no changes done
drivers/net/dsa/vitesse-vsc73xx-core.c | 69 ++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index f7c38f9a81a8..457eb7fddf4c 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -1304,6 +1304,72 @@ static int vsc73xx_vlan_set_pvid(struct dsa_switch *ds, int port, u16 vid,
return 0;
}
+static void vsc73xx_update_forwarding_map(struct vsc73xx *vsc)
+{
+ int i;
+
+ for (i = 0; i < vsc->ds->num_ports; i++) {
+ u32 val;
+
+ vsc73xx_read(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_SRCMASKS + i, &val);
+ /* update only if port is in forwarding state*/
+ if (val & VSC73XX_SRCMASKS_PORTS_MASK)
+ vsc73xx_update_bits(vsc, VSC73XX_BLOCK_ANALYZER, 0,
+ VSC73XX_SRCMASKS + i,
+ VSC73XX_SRCMASKS_PORTS_MASK,
+ vsc->forward_map[i]);
+ }
+}
+
+static int vsc73xx_port_bridge_join(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge,
+ bool *tx_fwd_offload,
+ struct netlink_ext_ack *extack)
+{
+ struct vsc73xx *vsc = ds->priv;
+ int i;
+
+ *tx_fwd_offload = true;
+
+ for (i = 0; i < ds->num_ports; i++) {
+ /* Add this port to the forwarding matrix of the
+ * other ports in the same bridge, and viceversa.
+ */
+ if (!dsa_is_user_port(ds, i))
+ continue;
+
+ if (i == port)
+ continue;
+
+ if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge))
+ continue;
+
+ vsc->forward_map[port] |= VSC73XX_SRCMASKS_PORTS_MASK & BIT(i);
+ vsc->forward_map[i] |= VSC73XX_SRCMASKS_PORTS_MASK & BIT(port);
+ }
+ vsc73xx_update_forwarding_map(vsc);
+
+ return dsa_tag_8021q_bridge_join(ds, port, bridge);
+}
+
+static void vsc73xx_port_bridge_leave(struct dsa_switch *ds, int port,
+ struct dsa_bridge bridge)
+{
+ struct vsc73xx *vsc = ds->priv;
+ int i;
+ /*configure forward map to CPU <-> port only*/
+ for (i = 0; i < vsc->ds->num_ports; i++) {
+ if (i == CPU_PORT)
+ continue;
+ vsc->forward_map[i] &= VSC73XX_SRCMASKS_PORTS_MASK & ~BIT(port);
+ }
+ vsc->forward_map[port] = VSC73XX_SRCMASKS_PORTS_MASK & BIT(CPU_PORT);
+
+ vsc73xx_update_forwarding_map(vsc);
+ dsa_tag_8021q_bridge_leave(ds, port, bridge);
+}
+
static int vsc73xx_tag_8021q_vlan_add(struct dsa_switch *ds, int port, u16 vid,
u16 flags)
{
@@ -1342,6 +1408,7 @@ static int vsc73xx_setup(struct dsa_switch *ds)
ds->vlan_filtering_is_global = false;
ds->configure_vlan_while_not_filtering = false;
+ ds->max_num_bridges = 7;
/* Issue RESET */
vsc73xx_write(vsc, VSC73XX_BLOCK_SYSTEM, 0, VSC73XX_GLORESET,
@@ -1452,6 +1519,8 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
.get_sset_count = vsc73xx_get_sset_count,
.port_enable = vsc73xx_port_enable,
.port_disable = vsc73xx_port_disable,
+ .port_bridge_join = vsc73xx_port_bridge_join,
+ .port_bridge_leave = vsc73xx_port_bridge_leave,
.port_change_mtu = vsc73xx_change_mtu,
.port_max_mtu = vsc73xx_get_max_mtu,
.port_stp_state_set = vsc73xx_port_stp_state_set,
--
2.34.1
next prev parent reply other threads:[~2023-06-25 11:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-06-25 11:53 [PATCH net-next v2 1/7] net: dsa: vsc73xx: use read_poll_timeout instead delay loop Pawel Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 2/7] net: dsa: vsc73xx: convert to PHYLINK Pawel Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 3/7] net: dsa: vsc73xx: add port_stp_state_set function Pawel Dembicki
2023-06-25 12:09 ` Vladimir Oltean
2023-06-25 11:53 ` [PATCH net-next v2 4/7] net: dsa: vsc73xx: Add dsa tagging based on 8021q Pawel Dembicki
2023-06-25 12:42 ` Simon Horman
2023-06-26 10:37 ` Dan Carpenter
2023-06-25 12:47 ` Vladimir Oltean
2023-06-29 21:00 ` Paweł Dembicki
2023-07-03 16:16 ` Vladimir Oltean
2023-06-25 11:53 ` Pawel Dembicki [this message]
2023-06-25 11:53 ` [PATCH net-next v2 6/7] net: dsa: vsc73xx: Add vlan filtering Pawel Dembicki
2023-06-25 15:05 ` Vladimir Oltean
2023-06-29 20:18 ` Paweł Dembicki
2023-07-03 16:55 ` Vladimir Oltean
2023-06-25 11:53 ` [PATCH net-next v2 7/7] net: dsa: vsc73xx: fix MTU configuration Pawel Dembicki
2023-06-25 14:54 ` Vladimir Oltean
2023-06-28 20:04 ` Paweł Dembicki
2023-06-25 11:53 ` [PATCH net-next v2 0/7] net: dsa: vsc73xx: Make vsc73xx usable Pawel Dembicki
2023-06-25 14:42 ` Vladimir Oltean
2023-06-25 15:07 ` [PATCH net-next v2 1/7] net: dsa: vsc73xx: use read_poll_timeout instead delay loop Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230625115343.1603330-5-paweldembicki@gmail.com \
--to=paweldembicki@gmail.com \
--cc=andrew@lunn.ch \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=f.fainelli@gmail.com \
--cc=kuba@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.