All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
To: qemu-devel@nongnu.org
Cc: qemu-riscv@nongnu.org, alistair.francis@wdc.com,
	bmeng@tinylab.org, liweiwei@iscas.ac.cn,
	zhiwei_liu@linux.alibaba.com, palmer@rivosinc.com,
	ajones@ventanamicro.com, philmd@linaro.org,
	Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Subject: [PATCH v6 14/20] target/riscv/kvm.c: add multi-letter extension KVM properties
Date: Wed, 28 Jun 2023 18:30:27 -0300	[thread overview]
Message-ID: <20230628213033.170315-15-dbarboza@ventanamicro.com> (raw)
In-Reply-To: <20230628213033.170315-1-dbarboza@ventanamicro.com>

Let's add KVM user properties for the multi-letter extensions that KVM
currently supports: zicbom, zicboz, zihintpause, zbb, ssaia, sstc,
svinval and svpbmt.

As with MISA extensions, we're using the KVMCPUConfig type to hold
information about the state of each extension. However, multi-letter
extensions have more cases to cover than MISA extensions, so we're
adding an extra 'supported' flag as well. This flag will reflect if a
given extension is supported by KVM, i.e. KVM knows how to handle it.
This is determined during KVM extension discovery in
kvm_riscv_init_multiext_cfg(), where we test for EINVAL errors. Any
other error different from EINVAL will cause an abort.

The use of the 'user_set' is similar to what we already do with MISA
extensions: the flag set only if the user is changing the extension
state.

The 'supported' flag will be used later on to make an exception for
users that are disabling multi-letter extensions that are unknown to
KVM.

Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
---
 target/riscv/cpu.c |   8 +++
 target/riscv/kvm.c | 119 +++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 127 insertions(+)

diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index f4b1868466..5428402cfa 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -1751,6 +1751,14 @@ static void riscv_cpu_add_user_properties(Object *obj)
     riscv_cpu_add_misa_properties(obj);
 
     for (prop = riscv_cpu_extensions; prop && prop->name; prop++) {
+#ifndef CONFIG_USER_ONLY
+        if (kvm_enabled()) {
+            /* Check if KVM created the property already */
+            if (object_property_find(obj, prop->name)) {
+                continue;
+            }
+        }
+#endif
         qdev_property_add_static(dev, prop);
     }
 
diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
index ba97b0cbed..68f6538b04 100644
--- a/target/riscv/kvm.c
+++ b/target/riscv/kvm.c
@@ -113,6 +113,7 @@ typedef struct KVMCPUConfig {
     target_ulong offset;
     int kvm_reg_id;
     bool user_set;
+    bool supported;
 } KVMCPUConfig;
 
 #define KVM_MISA_CFG(_bit, _reg_id) \
@@ -197,6 +198,81 @@ static void kvm_riscv_update_cpu_misa_ext(RISCVCPU *cpu, CPUState *cs)
     }
 }
 
+#define CPUCFG(_prop) offsetof(struct RISCVCPUConfig, _prop)
+
+#define KVM_EXT_CFG(_name, _prop, _reg_id) \
+    {.name = _name, .offset = CPUCFG(_prop), \
+     .kvm_reg_id = _reg_id}
+
+static KVMCPUConfig kvm_multi_ext_cfgs[] = {
+    KVM_EXT_CFG("zicbom", ext_icbom, KVM_RISCV_ISA_EXT_ZICBOM),
+    KVM_EXT_CFG("zicboz", ext_icboz, KVM_RISCV_ISA_EXT_ZICBOZ),
+    KVM_EXT_CFG("zihintpause", ext_zihintpause, KVM_RISCV_ISA_EXT_ZIHINTPAUSE),
+    KVM_EXT_CFG("zbb", ext_zbb, KVM_RISCV_ISA_EXT_ZBB),
+    KVM_EXT_CFG("ssaia", ext_ssaia, KVM_RISCV_ISA_EXT_SSAIA),
+    KVM_EXT_CFG("sstc", ext_sstc, KVM_RISCV_ISA_EXT_SSTC),
+    KVM_EXT_CFG("svinval", ext_svinval, KVM_RISCV_ISA_EXT_SVINVAL),
+    KVM_EXT_CFG("svpbmt", ext_svpbmt, KVM_RISCV_ISA_EXT_SVPBMT),
+};
+
+static void kvm_cpu_cfg_set(RISCVCPU *cpu, KVMCPUConfig *multi_ext,
+                            uint32_t val)
+{
+    int cpu_cfg_offset = multi_ext->offset;
+    bool *ext_enabled = (void *)&cpu->cfg + cpu_cfg_offset;
+
+    *ext_enabled = val;
+}
+
+static uint32_t kvm_cpu_cfg_get(RISCVCPU *cpu,
+                                KVMCPUConfig *multi_ext)
+{
+    int cpu_cfg_offset = multi_ext->offset;
+    bool *ext_enabled = (void *)&cpu->cfg + cpu_cfg_offset;
+
+    return *ext_enabled;
+}
+
+static void kvm_cpu_set_multi_ext_cfg(Object *obj, Visitor *v,
+                                      const char *name,
+                                      void *opaque, Error **errp)
+{
+    KVMCPUConfig *multi_ext_cfg = opaque;
+    RISCVCPU *cpu = RISCV_CPU(obj);
+    bool value, host_val;
+
+    if (!visit_type_bool(v, name, &value, errp)) {
+        return;
+    }
+
+    host_val = kvm_cpu_cfg_get(cpu, multi_ext_cfg);
+
+    /*
+     * Ignore if the user is setting the same value
+     * as the host.
+     */
+    if (value == host_val) {
+        return;
+    }
+
+    if (!multi_ext_cfg->supported) {
+        /*
+         * Error out if the user is trying to enable an
+         * extension that KVM doesn't support. Ignore
+         * option otherwise.
+         */
+        if (value) {
+            error_setg(errp, "KVM does not support disabling extension %s",
+                       multi_ext_cfg->name);
+        }
+
+        return;
+    }
+
+    multi_ext_cfg->user_set = true;
+    kvm_cpu_cfg_set(cpu, multi_ext_cfg, value);
+}
+
 static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj)
 {
     int i;
@@ -215,6 +291,15 @@ static void kvm_riscv_add_cpu_user_properties(Object *cpu_obj)
         object_property_set_description(cpu_obj, misa_cfg->name,
                                         misa_cfg->description);
     }
+
+    for (i = 0; i < ARRAY_SIZE(kvm_multi_ext_cfgs); i++) {
+        KVMCPUConfig *multi_cfg = &kvm_multi_ext_cfgs[i];
+
+        object_property_add(cpu_obj, multi_cfg->name, "bool",
+                            NULL,
+                            kvm_cpu_set_multi_ext_cfg,
+                            NULL, multi_cfg);
+    }
 }
 
 static int kvm_riscv_get_regs_core(CPUState *cs)
@@ -530,6 +615,39 @@ static void kvm_riscv_init_misa_ext_mask(RISCVCPU *cpu,
     env->misa_ext = env->misa_ext_mask;
 }
 
+static void kvm_riscv_init_multiext_cfg(RISCVCPU *cpu, KVMScratchCPU *kvmcpu)
+{
+    CPURISCVState *env = &cpu->env;
+    uint64_t val;
+    int i, ret;
+
+    for (i = 0; i < ARRAY_SIZE(kvm_multi_ext_cfgs); i++) {
+        KVMCPUConfig *multi_ext_cfg = &kvm_multi_ext_cfgs[i];
+        struct kvm_one_reg reg;
+
+        reg.id = kvm_riscv_reg_id(env, KVM_REG_RISCV_ISA_EXT,
+                                  multi_ext_cfg->kvm_reg_id);
+        reg.addr = (uint64_t)&val;
+        ret = ioctl(kvmcpu->cpufd, KVM_GET_ONE_REG, &reg);
+        if (ret != 0) {
+            if (ret == -EINVAL) {
+                /* Silently default to 'false' if KVM does not support it. */
+                multi_ext_cfg->supported = false;
+                val = false;
+            } else {
+                error_report("Unable to read ISA_EXT KVM register %s, "
+                             "error %d", multi_ext_cfg->name, ret);
+                kvm_riscv_destroy_scratch_vcpu(kvmcpu);
+                exit(EXIT_FAILURE);
+            }
+        } else {
+            multi_ext_cfg->supported = true;
+        }
+
+        kvm_cpu_cfg_set(cpu, multi_ext_cfg, val);
+    }
+}
+
 void kvm_riscv_init_user_properties(Object *cpu_obj)
 {
     RISCVCPU *cpu = RISCV_CPU(cpu_obj);
@@ -542,6 +660,7 @@ void kvm_riscv_init_user_properties(Object *cpu_obj)
     kvm_riscv_add_cpu_user_properties(cpu_obj);
     kvm_riscv_init_machine_ids(cpu, &kvmcpu);
     kvm_riscv_init_misa_ext_mask(cpu, &kvmcpu);
+    kvm_riscv_init_multiext_cfg(cpu, &kvmcpu);
 
     kvm_riscv_destroy_scratch_vcpu(&kvmcpu);
 }
-- 
2.41.0



  parent reply	other threads:[~2023-06-28 21:32 UTC|newest]

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-28 21:30 [PATCH v6 00/20] target/riscv, KVM: fixes and enhancements Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 01/20] target/riscv: skip features setup for KVM CPUs Daniel Henrique Barboza
2023-06-29  8:24   ` Andrew Jones
2023-06-28 21:30 ` [PATCH v6 02/20] hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set Daniel Henrique Barboza
2023-06-30  7:36   ` Michael Tokarev
2023-06-30  7:46     ` Daniel Henrique Barboza
2023-06-30  7:51       ` Michael Tokarev
2023-06-28 21:30 ` [PATCH v6 03/20] target/riscv/cpu.c: restrict 'mvendorid' value Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 04/20] target/riscv/cpu.c: restrict 'mimpid' value Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 05/20] target/riscv/cpu.c: restrict 'marchid' value Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 06/20] target/riscv: use KVM scratch CPUs to init KVM properties Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 07/20] target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids() Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 08/20] target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 09/20] linux-headers: Update to v6.4-rc1 Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 10/20] target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 11/20] target/riscv/cpu: add misa_ext_info_arr[] Daniel Henrique Barboza
2023-06-29  7:26   ` Philippe Mathieu-Daudé
2023-06-29 11:36     ` Daniel Henrique Barboza
2023-06-29 11:43       ` Daniel Henrique Barboza
2023-06-29  8:59   ` Andrew Jones
2023-06-29 11:40     ` Daniel Henrique Barboza
2023-06-29 22:04     ` Daniel Henrique Barboza
2023-06-30  7:21       ` Andrew Jones
2023-06-28 21:30 ` [PATCH v6 12/20] target/riscv: add KVM specific MISA properties Daniel Henrique Barboza
2023-06-29  9:12   ` Andrew Jones
2023-06-29 11:50     ` Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 13/20] target/riscv/kvm.c: update KVM MISA bits Daniel Henrique Barboza
2023-06-28 21:30 ` Daniel Henrique Barboza [this message]
2023-06-29  9:14   ` [PATCH v6 14/20] target/riscv/kvm.c: add multi-letter extension KVM properties Andrew Jones
2023-06-28 21:30 ` [PATCH v6 15/20] target/riscv/cpu.c: add satp_mode properties earlier Daniel Henrique Barboza
2023-06-29  7:30   ` Philippe Mathieu-Daudé
2023-06-29  9:15   ` Andrew Jones
2023-06-28 21:30 ` [PATCH v6 16/20] target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext() Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 17/20] target/riscv/cpu.c: create KVM mock properties Daniel Henrique Barboza
2023-06-29  9:17   ` Andrew Jones
2023-06-28 21:30 ` [PATCH v6 18/20] target/riscv: update multi-letter extension KVM properties Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 19/20] target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper Daniel Henrique Barboza
2023-06-28 21:30 ` [PATCH v6 20/20] target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM Daniel Henrique Barboza

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230628213033.170315-15-dbarboza@ventanamicro.com \
    --to=dbarboza@ventanamicro.com \
    --cc=ajones@ventanamicro.com \
    --cc=alistair.francis@wdc.com \
    --cc=bmeng@tinylab.org \
    --cc=liweiwei@iscas.ac.cn \
    --cc=palmer@rivosinc.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=qemu-riscv@nongnu.org \
    --cc=zhiwei_liu@linux.alibaba.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.