From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Maxime Bizon <mbizon@freebox.fr>,
Kalle Valo <quic_kvalo@quicinc.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, ath11k@lists.infradead.org,
linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.4 01/26] wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Date: Sun, 9 Jul 2023 11:12:30 -0400 [thread overview]
Message-ID: <20230709151255.512931-1-sashal@kernel.org> (raw)
From: Maxime Bizon <mbizon@freebox.fr>
[ Upstream commit e2ceb1de2f83aafd8003f0b72dfd4b7441e97d14 ]
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230421145445.2612280-1-mbizon@freebox.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1c93f1afccc57..05920ad413c55 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -8892,7 +8892,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
}
if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
- if (reg_cap->high_5ghz_chan >= ATH11K_MAX_6G_FREQ) {
+ if (reg_cap->high_5ghz_chan >= ATH11K_MIN_6G_FREQ) {
channels = kmemdup(ath11k_6ghz_channels,
sizeof(ath11k_6ghz_channels), GFP_KERNEL);
if (!channels) {
--
2.39.2
--
ath11k mailing list
ath11k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath11k
WARNING: multiple messages have this Message-ID (diff)
From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Maxime Bizon <mbizon@freebox.fr>,
Kalle Valo <quic_kvalo@quicinc.com>,
Sasha Levin <sashal@kernel.org>,
kvalo@kernel.org, ath11k@lists.infradead.org,
linux-wireless@vger.kernel.org
Subject: [PATCH AUTOSEL 6.4 01/26] wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range
Date: Sun, 9 Jul 2023 11:12:30 -0400 [thread overview]
Message-ID: <20230709151255.512931-1-sashal@kernel.org> (raw)
From: Maxime Bizon <mbizon@freebox.fr>
[ Upstream commit e2ceb1de2f83aafd8003f0b72dfd4b7441e97d14 ]
Because of what seems to be a typo, a 6Ghz-only phy for which the BDF
does not allow the 7115Mhz channel will fail to register:
WARNING: CPU: 2 PID: 106 at net/wireless/core.c:907 wiphy_register+0x914/0x954
Modules linked in: ath11k_pci sbsa_gwdt
CPU: 2 PID: 106 Comm: kworker/u8:5 Not tainted 6.3.0-rc7-next-20230418-00549-g1e096a17625a-dirty #9
Hardware name: Freebox V7R Board (DT)
Workqueue: ath11k_qmi_driver_event ath11k_qmi_driver_event_work
pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : wiphy_register+0x914/0x954
lr : ieee80211_register_hw+0x67c/0xc10
sp : ffffff800b123aa0
x29: ffffff800b123aa0 x28: 0000000000000000 x27: 0000000000000000
x26: 0000000000000000 x25: 0000000000000006 x24: ffffffc008d51418
x23: ffffffc008cb0838 x22: ffffff80176c2460 x21: 0000000000000168
x20: ffffff80176c0000 x19: ffffff80176c03e0 x18: 0000000000000014
x17: 00000000cbef338c x16: 00000000d2a26f21 x15: 00000000ad6bb85f
x14: 0000000000000020 x13: 0000000000000020 x12: 00000000ffffffbd
x11: 0000000000000208 x10: 00000000fffffdf7 x9 : ffffffc009394718
x8 : ffffff80176c0528 x7 : 000000007fffffff x6 : 0000000000000006
x5 : 0000000000000005 x4 : ffffff800b304284 x3 : ffffff800b304284
x2 : ffffff800b304d98 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
wiphy_register+0x914/0x954
ieee80211_register_hw+0x67c/0xc10
ath11k_mac_register+0x7c4/0xe10
ath11k_core_qmi_firmware_ready+0x1f4/0x570
ath11k_qmi_driver_event_work+0x198/0x590
process_one_work+0x1b8/0x328
worker_thread+0x6c/0x414
kthread+0x100/0x104
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
ath11k_pci 0002:01:00.0: ieee80211 registration failed: -22
ath11k_pci 0002:01:00.0: failed register the radio with mac80211: -22
ath11k_pci 0002:01:00.0: failed to create pdev core: -22
Signed-off-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20230421145445.2612280-1-mbizon@freebox.fr
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/net/wireless/ath/ath11k/mac.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/mac.c b/drivers/net/wireless/ath/ath11k/mac.c
index 1c93f1afccc57..05920ad413c55 100644
--- a/drivers/net/wireless/ath/ath11k/mac.c
+++ b/drivers/net/wireless/ath/ath11k/mac.c
@@ -8892,7 +8892,7 @@ static int ath11k_mac_setup_channels_rates(struct ath11k *ar,
}
if (supported_bands & WMI_HOST_WLAN_5G_CAP) {
- if (reg_cap->high_5ghz_chan >= ATH11K_MAX_6G_FREQ) {
+ if (reg_cap->high_5ghz_chan >= ATH11K_MIN_6G_FREQ) {
channels = kmemdup(ath11k_6ghz_channels,
sizeof(ath11k_6ghz_channels), GFP_KERNEL);
if (!channels) {
--
2.39.2
next reply other threads:[~2023-07-09 15:13 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-09 15:12 Sasha Levin [this message]
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 01/26] wifi: ath11k: fix registration of 6Ghz-only phy without the full channel range Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 02/26] bpf: Print a warning only if writing to unprivileged_bpf_disabled Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 03/26] wifi: rtw89: 8851be: add 8851BE PCI entry and fill PCI capabilities Sasha Levin
2023-07-10 0:25 ` Ping-Ke Shih
2023-07-20 19:11 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 04/26] spi: s3c64xx: change polling mode to optional Sasha Levin
2023-07-09 15:12 ` Sasha Levin
2023-07-09 21:14 ` Mark Brown
2023-07-09 21:14 ` Mark Brown
2023-07-20 19:11 ` Sasha Levin
2023-07-20 19:11 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 05/26] bpf: Address KCSAN report on bpf_lru_list Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 06/26] spi: cadence-quadspi: Add compatible for AMD Pensando Elba SoC Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 07/26] bpf: drop unnecessary user-triggerable WARN_ONCE in verifierl log Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 08/26] bpf: tcp: Avoid taking fast sock lock in iterator Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 09/26] wifi: rtw88: sdio: Check the HISR RX_REQUEST bit in rtw_sdio_rx_isr() Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 10/26] bpf: Silence a warning in btf_type_id_size() Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 11/26] devlink: make health report on unregistered instance warn just once Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 12/26] wifi: ath11k: add support default regdb while searching board-2.bin for WCN6855 Sasha Levin
2023-07-09 15:12 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 13/26] wifi: mac80211_hwsim: Fix possible NULL dereference Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 14/26] spi: dw: Add compatible for Intel Mount Evans SoC Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 15/26] wifi: ath12k: Avoid NULL pointer access during management transmit cleanup Sasha Levin
2023-07-09 15:12 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 16/26] wifi: ath11k: fix memory leak in WMI firmware stats Sasha Levin
2023-07-09 15:12 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 17/26] wifi: iwlwifi: mvm: fix potential array out of bounds access Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 18/26] net: ethernet: litex: add support for 64 bit stats Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 19/26] devlink: report devlink_port_type_warn source device Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 20/26] wifi: iwlwifi: mvm: Add NULL check before dereferencing the pointer Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 21/26] wifi: wext-core: Fix -Wstringop-overflow warning in ioctl_standard_iw_point() Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 22/26] wifi: iwlwifi: Add support for new PCI Id Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 23/26] wifi: iwlwifi: mvm: avoid baid size integer overflow Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 24/26] wifi: iwlwifi: pcie: add device id 51F1 for killer 1675 Sasha Levin
2023-07-09 15:12 ` [Intel-wired-lan] [PATCH AUTOSEL 6.4 25/26] igb: Fix igb_down hung on surprise removal Sasha Levin
2023-07-09 15:12 ` Sasha Levin
2023-07-09 15:12 ` [PATCH AUTOSEL 6.4 26/26] net: hns3: fix strncpy() not using dest-buf length as length issue Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230709151255.512931-1-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=ath11k@lists.infradead.org \
--cc=kvalo@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=mbizon@freebox.fr \
--cc=quic_kvalo@quicinc.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.