[Buildroot] [PATCH v2 1/1] configs/roc_rk3399_pc: Bring back and update the configuration for the rockchip rk3399 built by firefly.

[Roberto Medina <robertoxmed@gmail.com>]

* Uses a more recent version of TF-A which solves the building issue for
  this board.
* Bump on U-Boot version that was used for this configuration.
* Some minor fixes in the post-build.sh script using `shellcheck`.

Signed-off-by: Roberto Medina <robertoxmed@gmail.com>
Tested-by: Kilian Zinnecker <kilian.zinnecker@mail.de>
---
 board/firefly/roc-rk3399-pc/extlinux.conf |  4 +++
 board/firefly/roc-rk3399-pc/genimage.cfg  | 22 +++++++++++++
 board/firefly/roc-rk3399-pc/post-build.sh |  5 +++
 board/firefly/roc-rk3399-pc/readme.txt    | 40 +++++++++++++++++++++++
 configs/roc_pc_rk3399_defconfig           | 38 +++++++++++++++++++++
 5 files changed, 109 insertions(+)
 create mode 100644 board/firefly/roc-rk3399-pc/extlinux.conf
 create mode 100644 board/firefly/roc-rk3399-pc/genimage.cfg
 create mode 100755 board/firefly/roc-rk3399-pc/post-build.sh
 create mode 100644 board/firefly/roc-rk3399-pc/readme.txt
 create mode 100644 configs/roc_pc_rk3399_defconfig

diff --git a/board/firefly/roc-rk3399-pc/extlinux.conf b/board/firefly/roc-rk3399-pc/extlinux.conf
new file mode 100644
index 0000000000..50a358fadc
--- /dev/null
+++ b/board/firefly/roc-rk3399-pc/extlinux.conf
@@ -0,0 +1,4 @@
+label RK3399RocPC linux
+  kernel /boot/Image
+  devicetree /boot/rk3399-roc-pc.dtb
+  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
diff --git a/board/firefly/roc-rk3399-pc/genimage.cfg b/board/firefly/roc-rk3399-pc/genimage.cfg
new file mode 100644
index 0000000000..966c869273
--- /dev/null
+++ b/board/firefly/roc-rk3399-pc/genimage.cfg
@@ -0,0 +1,22 @@
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot-tpl-spl-dtb {
+		in-partition-table = "no"
+		image = "idbloader.img"
+		offset = 32K
+	}
+
+	partition u-boot-dtb {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 8M
+		size = 30M
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}
diff --git a/board/firefly/roc-rk3399-pc/post-build.sh b/board/firefly/roc-rk3399-pc/post-build.sh
new file mode 100755
index 0000000000..d84a5da0b0
--- /dev/null
+++ b/board/firefly/roc-rk3399-pc/post-build.sh
@@ -0,0 +1,5 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname "$0")"
+
+install -m 0644 -D "$BOARD_DIR"/extlinux.conf "$TARGET_DIR"/boot/extlinux/extlinux.conf
diff --git a/board/firefly/roc-rk3399-pc/readme.txt b/board/firefly/roc-rk3399-pc/readme.txt
new file mode 100644
index 0000000000..8a6f1cdee6
--- /dev/null
+++ b/board/firefly/roc-rk3399-pc/readme.txt
@@ -0,0 +1,40 @@
+Libre Computer Board ROC-RK3399-PC
+===================================
+
+Build:
+
+  $ make roc_pc_rk3399_defconfig
+  $ make
+
+Files created in output directory
+=================================
+
+output/images
+
+├── bl31.elf
+├── idbloader.img
+├── Image
+├── rk3399-roc-pc.dtb
+├── rootfs.ext2
+├── rootfs.ext4 -> rootfs.ext2
+├── rootfs.tar
+├── sdcard.img
+├── u-boot.bin
+└── u-boot.itb
+
+Creating bootable SD card:
+==========================
+
+Simply invoke (as root)
+
+sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
+
+Where X is your SD card device
+
+Serial console
+--------------
+
+Baudrate for this board is 1500000
+
+Wiki link:
+https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html
diff --git a/configs/roc_pc_rk3399_defconfig b/configs/roc_pc_rk3399_defconfig
new file mode 100644
index 0000000000..91574f1d61
--- /dev/null
+++ b/configs/roc_pc_rk3399_defconfig
@@ -0,0 +1,38 @@
+BR2_aarch64=y
+BR2_cortex_a72_a53=y
+BR2_BINUTILS_VERSION_2_40_X=y
+BR2_TARGET_GENERIC_HOSTNAME="roc-rk3399-pc"
+BR2_TARGET_GENERIC_ISSUE="Welcome to ROC-RK3399-PC!"
+BR2_ROOTFS_POST_BUILD_SCRIPT="board/firefly/roc-rk3399-pc/post-build.sh"
+BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/firefly/roc-rk3399-pc/genimage.cfg"
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_USE_ARCH_DEFAULT_CONFIG=y
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="rockchip/rk3399-roc-pc"
+BR2_LINUX_KERNEL_INSTALL_TARGET=y
+BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_4=y
+BR2_TARGET_ROOTFS_EXT2_SIZE="240M"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_GIT=y
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_URL="https://git.trustedfirmware.org/TF-A/trusted-firmware-a.git"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_CUSTOM_REPO_VERSION="v2.9.0"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM="rk3399"
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES=""
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN=y
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="roc-pc-rk3399"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
+BR2_TARGET_UBOOT_NEEDS_PYTHON3=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31=y
+BR2_TARGET_UBOOT_NEEDS_ATF_BL31_ELF=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
+BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.itb"
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="idbloader.img"
+BR2_PACKAGE_HOST_DOSFSTOOLS=y
+BR2_PACKAGE_HOST_GENIMAGE=y
+BR2_PACKAGE_HOST_MTOOLS=y
+BR2_PACKAGE_HOST_UBOOT_TOOLS=y
-- 
2.41.0
_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot