All of lore.kernel.org
 help / color / mirror / Atom feed
From: Rohan G Thomas <rohan.g.thomas@intel.com>
To: "David S . Miller" <davem@davemloft.net>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Rohan G Thomas <rohan.g.thomas@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH net-next 1/1] net: stmmac: xgmac: Fix L3L4 filter count
Date: Mon, 17 Jul 2023 20:06:03 +0800	[thread overview]
Message-ID: <20230717120603.5053-1-rohan.g.thomas@intel.com> (raw)

Get the exact count of L3L4 filters when the L3L4FNUM field of
HW_FEATURE1 register is >= 8. If L3L4FNUM < 8, then the number of L3L4
filters supported by XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8
the number of L3L4 filters goes on like 8, 16, 32, ... Current
maximum of L3L4FNUM = 10.

Also, fix the XGMAC_IDDR bitmask of L3L4_ADDR_CTRL register. IDDR
field starts from the 8th bit of the L3L4_ADDR_CTRL register. IDDR[3:0]
indicates the type of L3L4 filter register while IDDR[8:4] indicates
the filter number (0 to 31). So overall 9 bits are used for IDDR
(i.e. L3L4_ADDR_CTRL[16:8]) to address the registers of all the
filters. Currently, XGMAC_IDDR is GENMASK(15,8), causing issues
accessing L3L4 filters above 15 for those XGMACs configured with more
than 16 L3L4 filters.

Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 1913385df685..153321fe42c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -165,7 +165,7 @@
 #define XGMAC_DCS_SHIFT			16
 #define XGMAC_ADDRx_LOW(x)		(0x00000304 + (x) * 0x8)
 #define XGMAC_L3L4_ADDR_CTRL		0x00000c00
-#define XGMAC_IDDR			GENMASK(15, 8)
+#define XGMAC_IDDR			GENMASK(16, 8)
 #define XGMAC_IDDR_SHIFT		8
 #define XGMAC_IDDR_FNUM			4
 #define XGMAC_TT			BIT(1)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 070bd912580b..df5af52fd1a1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -408,6 +408,16 @@ static int dwxgmac2_get_hw_feature(void __iomem *ioaddr,
 	/* MAC HW feature 1 */
 	hw_cap = readl(ioaddr + XGMAC_HW_FEATURE1);
 	dma_cap->l3l4fnum = (hw_cap & XGMAC_HWFEAT_L3L4FNUM) >> 27;
+	/* If L3L4FNUM < 8, then the number of L3L4 filters supported by
+	 * XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8 the number of
+	 * L3L4 filters goes on like 8, 16, 32, ... Current maximum of
+	 * L3L4FNUM = 10.
+	 */
+	if (dma_cap->l3l4fnum >= 8 && dma_cap->l3l4fnum <= 10)
+		dma_cap->l3l4fnum = 8 << (dma_cap->l3l4fnum - 8);
+	else if (dma_cap->l3l4fnum > 10)
+		dma_cap->l3l4fnum = 32;
+
 	dma_cap->hash_tb_sz = (hw_cap & XGMAC_HWFEAT_HASHTBLSZ) >> 24;
 	dma_cap->rssen = (hw_cap & XGMAC_HWFEAT_RSSEN) >> 20;
 	dma_cap->tsoen = (hw_cap & XGMAC_HWFEAT_TSOEN) >> 18;
-- 
2.26.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Rohan G Thomas <rohan.g.thomas@intel.com>
To: "David S . Miller" <davem@davemloft.net>,
	Giuseppe Cavallaro <peppe.cavallaro@st.com>,
	Alexandre Torgue <alexandre.torgue@foss.st.com>,
	Jose Abreu <joabreu@synopsys.com>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: netdev@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Rohan G Thomas <rohan.g.thomas@intel.com>,
	Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Subject: [PATCH net-next 1/1] net: stmmac: xgmac: Fix L3L4 filter count
Date: Mon, 17 Jul 2023 20:06:03 +0800	[thread overview]
Message-ID: <20230717120603.5053-1-rohan.g.thomas@intel.com> (raw)

Get the exact count of L3L4 filters when the L3L4FNUM field of
HW_FEATURE1 register is >= 8. If L3L4FNUM < 8, then the number of L3L4
filters supported by XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8
the number of L3L4 filters goes on like 8, 16, 32, ... Current
maximum of L3L4FNUM = 10.

Also, fix the XGMAC_IDDR bitmask of L3L4_ADDR_CTRL register. IDDR
field starts from the 8th bit of the L3L4_ADDR_CTRL register. IDDR[3:0]
indicates the type of L3L4 filter register while IDDR[8:4] indicates
the filter number (0 to 31). So overall 9 bits are used for IDDR
(i.e. L3L4_ADDR_CTRL[16:8]) to address the registers of all the
filters. Currently, XGMAC_IDDR is GENMASK(15,8), causing issues
accessing L3L4 filters above 15 for those XGMACs configured with more
than 16 L3L4 filters.

Signed-off-by: Rohan G Thomas <rohan.g.thomas@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h     |  2 +-
 drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 10 ++++++++++
 2 files changed, 11 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
index 1913385df685..153321fe42c3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2.h
@@ -165,7 +165,7 @@
 #define XGMAC_DCS_SHIFT			16
 #define XGMAC_ADDRx_LOW(x)		(0x00000304 + (x) * 0x8)
 #define XGMAC_L3L4_ADDR_CTRL		0x00000c00
-#define XGMAC_IDDR			GENMASK(15, 8)
+#define XGMAC_IDDR			GENMASK(16, 8)
 #define XGMAC_IDDR_SHIFT		8
 #define XGMAC_IDDR_FNUM			4
 #define XGMAC_TT			BIT(1)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index 070bd912580b..df5af52fd1a1 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -408,6 +408,16 @@ static int dwxgmac2_get_hw_feature(void __iomem *ioaddr,
 	/* MAC HW feature 1 */
 	hw_cap = readl(ioaddr + XGMAC_HW_FEATURE1);
 	dma_cap->l3l4fnum = (hw_cap & XGMAC_HWFEAT_L3L4FNUM) >> 27;
+	/* If L3L4FNUM < 8, then the number of L3L4 filters supported by
+	 * XGMAC is equal to L3L4FNUM. From L3L4FNUM >= 8 the number of
+	 * L3L4 filters goes on like 8, 16, 32, ... Current maximum of
+	 * L3L4FNUM = 10.
+	 */
+	if (dma_cap->l3l4fnum >= 8 && dma_cap->l3l4fnum <= 10)
+		dma_cap->l3l4fnum = 8 << (dma_cap->l3l4fnum - 8);
+	else if (dma_cap->l3l4fnum > 10)
+		dma_cap->l3l4fnum = 32;
+
 	dma_cap->hash_tb_sz = (hw_cap & XGMAC_HWFEAT_HASHTBLSZ) >> 24;
 	dma_cap->rssen = (hw_cap & XGMAC_HWFEAT_RSSEN) >> 20;
 	dma_cap->tsoen = (hw_cap & XGMAC_HWFEAT_TSOEN) >> 18;
-- 
2.26.2


             reply	other threads:[~2023-07-17 12:08 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17 12:06 Rohan G Thomas [this message]
2023-07-17 12:06 ` [PATCH net-next 1/1] net: stmmac: xgmac: Fix L3L4 filter count Rohan G Thomas
2023-07-19 10:10 ` patchwork-bot+netdevbpf
2023-07-19 10:10   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717120603.5053-1-rohan.g.thomas@intel.com \
    --to=rohan.g.thomas@intel.com \
    --cc=alexandre.torgue@foss.st.com \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=joabreu@synopsys.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=peppe.cavallaro@st.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.