All of lore.kernel.org
 help / color / mirror / Atom feed
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Qiang Zhao <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: netdev@vger.kernel.org, linuxppc-dev@lists.ozlabs.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	alsa-devel@alsa-project.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Subject: [PATCH 08/26] soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa*
Date: Tue, 25 Jul 2023 11:23:44 +0200	[thread overview]
Message-ID: <20230725092417.43706-9-herve.codina@bootlin.com> (raw)
In-Reply-To: <20230725092417.43706-1-herve.codina@bootlin.com>

Introduce the qmc_chan_setup_tsa* functions to setup entries related
to the given channel.
Use them during QMC channels setup.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/soc/fsl/qe/qmc.c | 161 ++++++++++++++++++++++++++++++---------
 1 file changed, 125 insertions(+), 36 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
index 0dbf9e33715f..a9aba9943ab7 100644
--- a/drivers/soc/fsl/qe/qmc.c
+++ b/drivers/soc/fsl/qe/qmc.c
@@ -240,6 +240,11 @@ static inline void qmc_clrbits16(void *__iomem addr, u16 clr)
 	qmc_write16(addr, qmc_read16(addr) & ~clr);
 }
 
+static inline void qmc_clrsetbits16(void *__iomem addr, u16 clr, u16 set)
+{
+	qmc_write16(addr, (qmc_read16(addr) & ~clr) | set);
+}
+
 static inline void qmc_write32(void *__iomem addr, u32 val)
 {
 	iowrite32be(val, addr);
@@ -562,6 +567,122 @@ static void qmc_chan_read_done(struct qmc_chan *chan)
 	spin_unlock_irqrestore(&chan->rx_lock, flags);
 }
 
+static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_serial_info *info)
+{
+	unsigned int i;
+	u16 curr;
+	u16 val;
+
+	/*
+	 * Use a common Tx/Rx 64 entries table.
+	 * Tx and Rx related stuffs must be identical
+	 */
+	if (chan->tx_ts_mask != chan->rx_ts_mask) {
+		dev_err(chan->qmc->dev, "chan %u uses different Rx and Tx TS\n", chan->id);
+		return -EINVAL;
+	}
+
+	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
+
+	/* Check entries based on Rx stuff*/
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u TxRx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+
+	/* Set entries based on Rx stuff*/
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+
+	return 0;
+}
+
+static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info)
+{
+	unsigned int i;
+	u16 curr;
+	u16 val;
+
+	/* Use a Tx 32 entries table and a Rx 32 entries table */
+
+	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
+
+	/* Check entries based on Rx stuff */
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u Rx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+	/* Check entries based on Tx stuff */
+	for (i = 0; i < info->nb_tx_ts; i++) {
+		if (!(chan->tx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u Tx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+
+	/* Set entries based on Rx stuff */
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+	/* Set entries based on Tx stuff */
+	for (i = 0; i < info->nb_tx_ts; i++) {
+		if (!(chan->tx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+
+	return 0;
+}
+
+static int qmc_chan_setup_tsa(struct qmc_chan *chan)
+{
+	struct tsa_serial_info info;
+	int ret;
+
+	/* Retrieve info from the TSA related serial */
+	ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info);
+	if (ret)
+		return ret;
+
+	/*
+	 * Setup one common 64 entries table or two 32 entries (one for Tx
+	 * and one for Tx) according to assigned TS numbers.
+	 */
+	return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ?
+		qmc_chan_setup_tsa_64rxtx(chan, &info) :
+		qmc_chan_setup_tsa_32rx_32tx(chan, &info);
+}
+
 static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)
 {
 	return cpm_command(chan->id << 2, (qmc_opcode << 4) | 0x0E);
@@ -921,7 +1042,6 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np)
 
 static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *info)
 {
-	struct qmc_chan *chan;
 	unsigned int i;
 	u16 val;
 
@@ -935,18 +1055,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
 	for (i = 0; i < 64; i++)
 		qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), 0x0000);
 
-	/* Set entries based on Rx stuff*/
-	list_for_each_entry(chan, &qmc->chan_head, list) {
-		for (i = 0; i < info->nb_rx_ts; i++) {
-			if (!(chan->rx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
-		}
-	}
-
 	/* Set Wrap bit on last entry */
 	qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
 		      QMC_TSA_WRAP);
@@ -963,7 +1071,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
 
 static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info *info)
 {
-	struct qmc_chan *chan;
 	unsigned int i;
 	u16 val;
 
@@ -978,28 +1085,6 @@ static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info
 		qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), 0x0000);
 	}
 
-	/* Set entries based on Rx and Tx stuff*/
-	list_for_each_entry(chan, &qmc->chan_head, list) {
-		/* Rx part */
-		for (i = 0; i < info->nb_rx_ts; i++) {
-			if (!(chan->rx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
-		}
-		/* Tx part */
-		for (i = 0; i < info->nb_tx_ts; i++) {
-			if (!(chan->tx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), val);
-		}
-	}
-
 	/* Set Wrap bit on last entries */
 	qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
 		      QMC_TSA_WRAP);
@@ -1081,6 +1166,10 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)
 
 	chan->qmc = qmc;
 
+	ret = qmc_chan_setup_tsa(chan);
+	if (ret)
+		return ret;
+
 	/* Set channel specific parameter base address */
 	chan->s_param = qmc->dpram + (chan->id * 64);
 	/* 16 bd per channel (8 rx and 8 tx) */
-- 
2.41.0


WARNING: multiple messages have this Message-ID (diff)
From: Herve Codina <herve.codina@bootlin.com>
To: Herve Codina <herve.codina@bootlin.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Andrew Lunn <andrew@lunn.ch>, Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>, Lee Jones <lee@kernel.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Qiang Zhao <qiang.zhao@nxp.com>, Li Yang <leoyang.li@nxp.com>,
	Liam Girdwood <lgirdwood@gmail.com>,
	Mark Brown <broonie@kernel.org>, Jaroslav Kysela <perex@perex.cz>,
	Takashi Iwai <tiwai@suse.com>,
	Shengjiu Wang <shengjiu.wang@gmail.com>,
	Xiubo Li <Xiubo.Lee@gmail.com>,
	Fabio Estevam <festevam@gmail.com>,
	Nicolin Chen <nicoleotsuka@gmail.com>,
	Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: devicetree@vger.kernel.org, alsa-devel@alsa-project.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-gpio@vger.kernel.org,
	Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	linuxppc-dev@lists.ozlabs.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 08/26] soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa*
Date: Tue, 25 Jul 2023 11:23:44 +0200	[thread overview]
Message-ID: <20230725092417.43706-9-herve.codina@bootlin.com> (raw)
In-Reply-To: <20230725092417.43706-1-herve.codina@bootlin.com>

Introduce the qmc_chan_setup_tsa* functions to setup entries related
to the given channel.
Use them during QMC channels setup.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
---
 drivers/soc/fsl/qe/qmc.c | 161 ++++++++++++++++++++++++++++++---------
 1 file changed, 125 insertions(+), 36 deletions(-)

diff --git a/drivers/soc/fsl/qe/qmc.c b/drivers/soc/fsl/qe/qmc.c
index 0dbf9e33715f..a9aba9943ab7 100644
--- a/drivers/soc/fsl/qe/qmc.c
+++ b/drivers/soc/fsl/qe/qmc.c
@@ -240,6 +240,11 @@ static inline void qmc_clrbits16(void *__iomem addr, u16 clr)
 	qmc_write16(addr, qmc_read16(addr) & ~clr);
 }
 
+static inline void qmc_clrsetbits16(void *__iomem addr, u16 clr, u16 set)
+{
+	qmc_write16(addr, (qmc_read16(addr) & ~clr) | set);
+}
+
 static inline void qmc_write32(void *__iomem addr, u32 val)
 {
 	iowrite32be(val, addr);
@@ -562,6 +567,122 @@ static void qmc_chan_read_done(struct qmc_chan *chan)
 	spin_unlock_irqrestore(&chan->rx_lock, flags);
 }
 
+static int qmc_chan_setup_tsa_64rxtx(struct qmc_chan *chan, const struct tsa_serial_info *info)
+{
+	unsigned int i;
+	u16 curr;
+	u16 val;
+
+	/*
+	 * Use a common Tx/Rx 64 entries table.
+	 * Tx and Rx related stuffs must be identical
+	 */
+	if (chan->tx_ts_mask != chan->rx_ts_mask) {
+		dev_err(chan->qmc->dev, "chan %u uses different Rx and Tx TS\n", chan->id);
+		return -EINVAL;
+	}
+
+	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
+
+	/* Check entries based on Rx stuff*/
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u TxRx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+
+	/* Set entries based on Rx stuff*/
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+
+	return 0;
+}
+
+static int qmc_chan_setup_tsa_32rx_32tx(struct qmc_chan *chan, const struct tsa_serial_info *info)
+{
+	unsigned int i;
+	u16 curr;
+	u16 val;
+
+	/* Use a Tx 32 entries table and a Rx 32 entries table */
+
+	val = QMC_TSA_VALID | QMC_TSA_MASK | QMC_TSA_CHANNEL(chan->id);
+
+	/* Check entries based on Rx stuff */
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u Rx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+	/* Check entries based on Tx stuff */
+	for (i = 0; i < info->nb_tx_ts; i++) {
+		if (!(chan->tx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		curr = qmc_read16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2));
+		if (curr & QMC_TSA_VALID && (curr & ~QMC_TSA_WRAP) != val) {
+			dev_err(chan->qmc->dev, "chan %u Tx entry %d already used\n",
+				chan->id, i);
+			return -EBUSY;
+		}
+	}
+
+	/* Set entries based on Rx stuff */
+	for (i = 0; i < info->nb_rx_ts; i++) {
+		if (!(chan->rx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATRX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+	/* Set entries based on Tx stuff */
+	for (i = 0; i < info->nb_tx_ts; i++) {
+		if (!(chan->tx_ts_mask & (((u64)1) << i)))
+			continue;
+
+		qmc_clrsetbits16(chan->qmc->scc_pram + QMC_GBL_TSATTX + (i * 2),
+				 ~QMC_TSA_WRAP, val);
+	}
+
+	return 0;
+}
+
+static int qmc_chan_setup_tsa(struct qmc_chan *chan)
+{
+	struct tsa_serial_info info;
+	int ret;
+
+	/* Retrieve info from the TSA related serial */
+	ret = tsa_serial_get_info(chan->qmc->tsa_serial, &info);
+	if (ret)
+		return ret;
+
+	/*
+	 * Setup one common 64 entries table or two 32 entries (one for Tx
+	 * and one for Tx) according to assigned TS numbers.
+	 */
+	return ((info.nb_tx_ts > 32) || (info.nb_rx_ts > 32)) ?
+		qmc_chan_setup_tsa_64rxtx(chan, &info) :
+		qmc_chan_setup_tsa_32rx_32tx(chan, &info);
+}
+
 static int qmc_chan_command(struct qmc_chan *chan, u8 qmc_opcode)
 {
 	return cpm_command(chan->id << 2, (qmc_opcode << 4) | 0x0E);
@@ -921,7 +1042,6 @@ static int qmc_of_parse_chans(struct qmc *qmc, struct device_node *np)
 
 static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *info)
 {
-	struct qmc_chan *chan;
 	unsigned int i;
 	u16 val;
 
@@ -935,18 +1055,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
 	for (i = 0; i < 64; i++)
 		qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), 0x0000);
 
-	/* Set entries based on Rx stuff*/
-	list_for_each_entry(chan, &qmc->chan_head, list) {
-		for (i = 0; i < info->nb_rx_ts; i++) {
-			if (!(chan->rx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
-		}
-	}
-
 	/* Set Wrap bit on last entry */
 	qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
 		      QMC_TSA_WRAP);
@@ -963,7 +1071,6 @@ static int qmc_init_tsa_64rxtx(struct qmc *qmc, const struct tsa_serial_info *in
 
 static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info *info)
 {
-	struct qmc_chan *chan;
 	unsigned int i;
 	u16 val;
 
@@ -978,28 +1085,6 @@ static int qmc_init_tsa_32rx_32tx(struct qmc *qmc, const struct tsa_serial_info
 		qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), 0x0000);
 	}
 
-	/* Set entries based on Rx and Tx stuff*/
-	list_for_each_entry(chan, &qmc->chan_head, list) {
-		/* Rx part */
-		for (i = 0; i < info->nb_rx_ts; i++) {
-			if (!(chan->rx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATRX + (i * 2), val);
-		}
-		/* Tx part */
-		for (i = 0; i < info->nb_tx_ts; i++) {
-			if (!(chan->tx_ts_mask & (((u64)1) << i)))
-				continue;
-
-			val = QMC_TSA_VALID | QMC_TSA_MASK |
-			      QMC_TSA_CHANNEL(chan->id);
-			qmc_write16(qmc->scc_pram + QMC_GBL_TSATTX + (i * 2), val);
-		}
-	}
-
 	/* Set Wrap bit on last entries */
 	qmc_setbits16(qmc->scc_pram + QMC_GBL_TSATRX + ((info->nb_rx_ts - 1) * 2),
 		      QMC_TSA_WRAP);
@@ -1081,6 +1166,10 @@ static int qmc_setup_chan(struct qmc *qmc, struct qmc_chan *chan)
 
 	chan->qmc = qmc;
 
+	ret = qmc_chan_setup_tsa(chan);
+	if (ret)
+		return ret;
+
 	/* Set channel specific parameter base address */
 	chan->s_param = qmc->dpram + (chan->id * 64);
 	/* 16 bd per channel (8 rx and 8 tx) */
-- 
2.41.0


  parent reply	other threads:[~2023-07-25  9:28 UTC|newest]

Thread overview: 59+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-25  9:23 [PATCH 00/26] Add support for QMC HDLC, framer infrastruture and PEF2256 framer Herve Codina
2023-07-25  9:23 ` Herve Codina
2023-07-25  9:23 ` Herve Codina
2023-07-25  9:23 ` [PATCH 01/26] soc: fsl: cpm1: qmc: Fix rx channel reset Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 02/26] soc: fsl: cpm1: qmc: Extend the API to provide Rx status Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 03/26] dt-bindings: net: Add support for QMC HDLC Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 04/26] net: wan: " Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 05/26] MAINTAINERS: Add the Freescale QMC HDLC driver entry Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 06/26] soc: fsl: cpm1: qmc: Introduce available timeslots masks Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 07/26] soc: fsl: cpm1: qmc: Rename qmc_setup_tsa* to qmc_init_tsa* Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` Herve Codina [this message]
2023-07-25  9:23   ` [PATCH 08/26] soc: fsl: cpm1: qmc: Introduce qmc_chan_setup_tsa* Herve Codina
2023-07-25  9:23 ` [PATCH 09/26] soc: fsl: cpm1: qmc: Remove no more needed checks from qmc_check_chans() Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 10/26] soc: fsl: cpm1: qmc: Check available timeslots in qmc_check_chans() Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 11/26] soc: fsl: cpm1: qmc: Add support for disabling channel TSA entries Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 12/26] soc: fsl: cpm1: qmc: Split Tx and Rx TSA entries setup Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 13/26] soc: fsl: cpm1: qmc: Introduce is_tsa_64rxtx flag Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 14/26] soc: fsl: cpm1: qmc: Handle timeslot entries at channel start() and stop() Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 15/26] soc: fsl: cpm1: qmc: Remove timeslots handling from setup_chan() Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 16/26] soc: fsl: cpm1: qmc: Introduce functions to change timeslots at runtime Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 17/26] wan: qmc_hdlc: Add runtime timeslots changes support Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 18/26] net: wan: Add framer framework support Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 19/26] dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 20/26] mfd: core: Ensure disabled devices are skiped without aborting Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 21/26] net: wan: framer: Add support for the Lantiq PEF2256 framer Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 22/26] pinctrl: Add support for the Lantic PEF2256 pinmux Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:23 ` [PATCH 23/26] MAINTAINERS: Add the Lantiq PEF2256 driver entry Herve Codina
2023-07-25  9:23   ` Herve Codina
2023-07-25  9:24 ` [PATCH 24/26] ASoC: codecs: Add support for the framer codec Herve Codina
2023-07-25  9:24   ` Herve Codina
2023-07-25 16:41   ` Randy Dunlap
2023-07-25 16:41     ` Randy Dunlap
2023-07-25  9:24 ` [PATCH 25/26] dt-bindings: net: fsl,qmc-hdlc: Add framer support Herve Codina
2023-07-25  9:24   ` Herve Codina
2023-07-25  9:24 ` [PATCH 26/26] net: wan: fsl_qmc_hdlc: " Herve Codina
2023-07-25  9:24   ` Herve Codina
2023-07-26  4:14 ` [PATCH 00/26] Add support for QMC HDLC, framer infrastruture and PEF2256 framer Jakub Kicinski
2023-07-26  4:14   ` Jakub Kicinski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230725092417.43706-9-herve.codina@bootlin.com \
    --to=herve.codina@bootlin.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=andrew@lunn.ch \
    --cc=broonie@kernel.org \
    --cc=christophe.leroy@csgroup.eu \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=festevam@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=lee@kernel.org \
    --cc=leoyang.li@nxp.com \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=perex@perex.cz \
    --cc=qiang.zhao@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=shengjiu.wang@gmail.com \
    --cc=thomas.petazzoni@bootlin.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.