All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>, Conor Dooley <conor+dt@kernel.org>,
	Daniel Vetter <daniel@ffwll.ch>, David Airlie <airlied@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Rob Herring <robh+dt@kernel.org>, Sam Ravnborg <sam@ravnborg.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	devicetree@vger.kernel.org
Subject: [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry
Date: Mon, 31 Jul 2023 23:02:58 +0200	[thread overview]
Message-ID: <20230731210258.256152-2-marex@denx.de> (raw)
In-Reply-To: <20230731210258.256152-1-marex@denx.de>

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 396a22177c674..417dd69054fc1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2377,6 +2377,37 @@ static const struct panel_desc innolux_g121x1_l03 = {
 	},
 };
 
+static const struct display_timing innolux_g156hce_l01_timings = {
+	.pixelclock = { 120000000, 144000000, 150000000 },
+	.hactive = { 1920, 1920, 1920 },
+	.hfront_porch = { 80, 90, 100 },
+	.hback_porch = { 80, 90, 100 },
+	.hsync_len = { 20, 30, 30 },
+	.vactive = { 1080, 1080, 1080 },
+	.vfront_porch = { 3, 10, 20 },
+	.vback_porch = { 3, 10, 20 },
+	.vsync_len = { 4, 10, 10 },
+};
+
+static const struct panel_desc innolux_g156hce_l01 = {
+	.timings = &innolux_g156hce_l01_timings,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 344,
+		.height = 194,
+	},
+	.delay = {
+		.prepare = 1,		/* T1+T2 */
+		.enable = 450,		/* T5 */
+		.disable = 200,		/* T6 */
+		.unprepare = 10,	/* T3+T7 */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode innolux_n156bge_l21_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -4243,6 +4274,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,g121x1-l03",
 		.data = &innolux_g121x1_l03,
+	}, {
+		.compatible = "innolux,g156hce-l01",
+		.data = &innolux_g156hce_l01,
 	}, {
 		.compatible = "innolux,n156bge-l21",
 		.data = &innolux_n156bge_l21,
-- 
2.40.1


WARNING: multiple messages have this Message-ID (diff)
From: Marek Vasut <marex@denx.de>
To: dri-devel@lists.freedesktop.org
Cc: Marek Vasut <marex@denx.de>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org, Sam Ravnborg <sam@ravnborg.org>,
	Rob Herring <robh+dt@kernel.org>,
	Thierry Reding <thierry.reding@gmail.com>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Subject: [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry
Date: Mon, 31 Jul 2023 23:02:58 +0200	[thread overview]
Message-ID: <20230731210258.256152-2-marex@denx.de> (raw)
In-Reply-To: <20230731210258.256152-1-marex@denx.de>

Add support for Innolux G156HCE-L01 15.6" 1920x1080 24bpp
dual-link LVDS TFT panel. Documentation is available at [1].
The middle frequency is tuned slightly upward from 70.93 MHz
to 72 MHz, otherwise the panel shows slight flicker.

[1] https://www.distec.de/fileadmin/pdf/produkte/TFT-Displays/Innolux/G156HCE-L01_Rev.C3_Datasheet.pdf

Signed-off-by: Marek Vasut <marex@denx.de>
---
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: devicetree@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
---
 drivers/gpu/drm/panel/panel-simple.c | 34 ++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 396a22177c674..417dd69054fc1 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2377,6 +2377,37 @@ static const struct panel_desc innolux_g121x1_l03 = {
 	},
 };
 
+static const struct display_timing innolux_g156hce_l01_timings = {
+	.pixelclock = { 120000000, 144000000, 150000000 },
+	.hactive = { 1920, 1920, 1920 },
+	.hfront_porch = { 80, 90, 100 },
+	.hback_porch = { 80, 90, 100 },
+	.hsync_len = { 20, 30, 30 },
+	.vactive = { 1080, 1080, 1080 },
+	.vfront_porch = { 3, 10, 20 },
+	.vback_porch = { 3, 10, 20 },
+	.vsync_len = { 4, 10, 10 },
+};
+
+static const struct panel_desc innolux_g156hce_l01 = {
+	.timings = &innolux_g156hce_l01_timings,
+	.num_timings = 1,
+	.bpc = 8,
+	.size = {
+		.width = 344,
+		.height = 194,
+	},
+	.delay = {
+		.prepare = 1,		/* T1+T2 */
+		.enable = 450,		/* T5 */
+		.disable = 200,		/* T6 */
+		.unprepare = 10,	/* T3+T7 */
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG,
+	.bus_flags = DRM_BUS_FLAG_DE_HIGH,
+	.connector_type = DRM_MODE_CONNECTOR_LVDS,
+};
+
 static const struct drm_display_mode innolux_n156bge_l21_mode = {
 	.clock = 69300,
 	.hdisplay = 1366,
@@ -4243,6 +4274,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "innolux,g121x1-l03",
 		.data = &innolux_g121x1_l03,
+	}, {
+		.compatible = "innolux,g156hce-l01",
+		.data = &innolux_g156hce_l01,
 	}, {
 		.compatible = "innolux,n156bge-l21",
 		.data = &innolux_n156bge_l21,
-- 
2.40.1


  reply	other threads:[~2023-07-31 21:03 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-31 21:02 [PATCH 1/2] dt-bindings: display: simple: Add Innolux G156HCE-L01 panel Marek Vasut
2023-07-31 21:02 ` Marek Vasut
2023-07-31 21:02 ` Marek Vasut [this message]
2023-07-31 21:02   ` [PATCH 2/2] drm/panel-simple: Add Innolux G156HCE-L01 panel entry Marek Vasut
2023-08-03  8:24   ` Neil Armstrong
2023-08-03  8:24     ` Neil Armstrong
2023-08-03 14:23   ` Luca Ceresoli
2023-08-03 14:23     ` Luca Ceresoli
2023-08-03 14:25     ` Marek Vasut
2023-08-03 14:25       ` Marek Vasut
2023-08-03 15:06       ` Luca Ceresoli
2023-08-03 15:06         ` Luca Ceresoli
2023-08-03 17:10         ` Marek Vasut
2023-08-03 17:10           ` Marek Vasut
2023-08-04  8:19           ` Luca Ceresoli
2023-08-04 14:30             ` Luca Ceresoli
2023-08-04 14:30               ` Luca Ceresoli
2023-08-01 15:42 ` [PATCH 1/2] dt-bindings: display: simple: Add Innolux G156HCE-L01 panel Conor Dooley
2023-08-01 15:42   ` Conor Dooley
2023-08-03  8:27 ` Neil Armstrong
2023-08-03  8:27   ` Neil Armstrong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230731210258.256152-2-marex@denx.de \
    --to=marex@denx.de \
    --cc=airlied@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=daniel@ffwll.ch \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh+dt@kernel.org \
    --cc=sam@ravnborg.org \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.