All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nishanth Menon <nm@ti.com>
To: Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Tero Kristo <kristo@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>, <tony@atomide.com>,
	Nishanth Menon <nm@ti.com>
Subject: [PATCH] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
Date: Tue, 1 Aug 2023 23:03:47 -0500	[thread overview]
Message-ID: <20230802040347.2264339-1-nm@ti.com> (raw)

Fix up outstanding pingroup node names to be compliant with the
upcoming pinctrl-single schema.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi   | 2 +-
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts         | 4 ++--
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7c1402b0fa2d..e07ddff22e07 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
 		>;
 	};
 
-	gbe_pmx_obsclk: gbe-pmx-clk-default {
+	gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e73458ca6900..e9419c4fe605 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -10,7 +10,7 @@
  */
 
 &main_pmx0 {
-	cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+	cp2102n_reset_pin_default: cp2102n-reset-default-pins {
 		pinctrl-single,pins = <
 			/* (AF12) GPIO1_24, used as cp2102 reset */
 			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 973a89b04a22..734b051c9700 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -192,7 +192,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
 		>;
 	};
 
-	wkup_pca554_default: wkup-pca554-default {
+	wkup_pca554_default: wkup-pca554-default-pins {
 		pinctrl-single,pins = <
 			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index cbe44634914f..774eb14ac907 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
 		>;
 	};
 
-	main_bkey_pcie_reset: main-bkey-pcie-reset {
+	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
 		>;
@@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
 		>;
 	};
 
-	main_m2_pcie_mux_control: main-m2-pcie-mux-control {
+	main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
 			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 21ad49cfa7ee..a8172ba55f4b 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -273,7 +273,7 @@ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
 		>;
 	};
 
-	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default {
+	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
 		pinctrl-single,pins = <
 			J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */
 			J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
@@ -289,7 +289,7 @@ J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */
 };
 
 &wkup_pmx3 {
-	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default {
+	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 {
 		pinctrl-single,pins = <
 			J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
 		>;
-- 
2.40.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Conor Dooley <conor+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	Tero Kristo <kristo@kernel.org>,
	Vignesh Raghavendra <vigneshr@ti.com>, <tony@atomide.com>,
	Nishanth Menon <nm@ti.com>
Subject: [PATCH] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks
Date: Tue, 1 Aug 2023 23:03:47 -0500	[thread overview]
Message-ID: <20230802040347.2264339-1-nm@ti.com> (raw)

Fix up outstanding pingroup node names to be compliant with the
upcoming pinctrl-single schema.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi   | 2 +-
 arch/arm64/boot/dts/ti/k3-am654-base-board.dts           | 2 +-
 arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts | 4 ++--
 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts         | 4 ++--
 5 files changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 7c1402b0fa2d..e07ddff22e07 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -432,7 +432,7 @@ AM62X_MCU_IOPAD(0x0048, PIN_INPUT, 0) /* (D10) MCU_I2C0_SDA */
 		>;
 	};
 
-	gbe_pmx_obsclk: gbe-pmx-clk-default {
+	gbe_pmx_obsclk: gbe-pmx-obsclk-default-pins {
 		pinctrl-single,pins = <
 			AM62X_MCU_IOPAD(0x0004, PIN_OUTPUT, 1) /* (B8) MCU_SPI0_CS1.MCU_OBSCLK0 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
index e73458ca6900..e9419c4fe605 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common-pg2.dtsi
@@ -10,7 +10,7 @@
  */
 
 &main_pmx0 {
-	cp2102n_reset_pin_default: cp2102n-reset-pin-default {
+	cp2102n_reset_pin_default: cp2102n-reset-default-pins {
 		pinctrl-single,pins = <
 			/* (AF12) GPIO1_24, used as cp2102 reset */
 			AM65X_IOPAD(0x01e0, PIN_OUTPUT, 7)
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index 973a89b04a22..734b051c9700 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -192,7 +192,7 @@ AM65X_WKUP_IOPAD(0x002c, PIN_OUTPUT, 0) /* (R4) MCU_OSPI0_CSn0 */
 		>;
 	};
 
-	wkup_pca554_default: wkup-pca554-default {
+	wkup_pca554_default: wkup-pca554-default-pins {
 		pinctrl-single,pins = <
 			AM65X_WKUP_IOPAD(0x0034, PIN_INPUT, 7) /* (T1) MCU_OSPI1_CLK.WKUP_GPIO0_25 */
 		>;
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
index cbe44634914f..774eb14ac907 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-m2.dts
@@ -33,7 +33,7 @@ AM65X_IOPAD(0x01c4, PIN_INPUT_PULLUP, 7)  /* (AH13) GPIO1_17 */
 		>;
 	};
 
-	main_bkey_pcie_reset: main-bkey-pcie-reset {
+	main_bkey_pcie_reset: main-bkey-pcie-reset-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x01bc, PIN_OUTPUT_PULLUP, 7)  /* (AG13) GPIO1_15 */
 		>;
@@ -46,7 +46,7 @@ AM65X_IOPAD(0x01cc, PIN_INPUT_PULLUP, 7)  /* (AD13) GPIO1_19 */
 		>;
 	};
 
-	main_m2_pcie_mux_control: main-m2-pcie-mux-control {
+	main_m2_pcie_mux_control: main-m2-pcie-mux-control-default-pins {
 		pinctrl-single,pins = <
 			AM65X_IOPAD(0x0148, PIN_INPUT_PULLUP, 7)  /* (AG22) GPIO0_82 */
 			AM65X_IOPAD(0x0160, PIN_INPUT_PULLUP, 7)  /* (AE20) GPIO0_88 */
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index 21ad49cfa7ee..a8172ba55f4b 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -273,7 +273,7 @@ J721S2_WKUP_IOPAD(0x088, PIN_OUTPUT, 0) /* (C25) WKUP_GPIO0_12.MCU_UART0_TXD */
 		>;
 	};
 
-	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-pins0-default {
+	mcu_rpi_header_gpio0_pins0_default: mcu-rpi-header-gpio0-default-pins-0 {
 		pinctrl-single,pins = <
 			J721S2_WKUP_IOPAD(0x118, PIN_INPUT, 7) /* (G25) WKUP_GPIO0_66 */
 			J721S2_WKUP_IOPAD(0x05C, PIN_INPUT, 7) /* (E24) MCU_SPI1_D0.WKUP_GPIO0_1 */
@@ -289,7 +289,7 @@ J721S2_WKUP_IOPAD(0x064, PIN_INPUT, 7) /* (C27) MCU_SPI1_CS0.WKUP_GPIO0_3 */
 };
 
 &wkup_pmx3 {
-	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-pins1-default {
+	mcu_rpi_header_gpio0_pins1_default: mcu-rpi-header-gpio0-default-pins-1 {
 		pinctrl-single,pins = <
 			J721S2_WKUP_IOPAD(0x000, PIN_INPUT, 7) /* (K26) WKUP_GPIO0_49 */
 		>;
-- 
2.40.0


             reply	other threads:[~2023-08-02  4:04 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-08-02  4:03 Nishanth Menon [this message]
2023-08-02  4:03 ` [PATCH] arm64: dts: ti: k3: Fixup remaining pin group node names for make dtbs checks Nishanth Menon
2023-08-02  7:42 ` Tony Lindgren
2023-08-02  7:42   ` Tony Lindgren
2023-08-05 18:27 ` Nishanth Menon
2023-08-05 18:27   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230802040347.2264339-1-nm@ti.com \
    --to=nm@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.