From: Mike Rapoport <rppt@kernel.org>
To: Usama Arif <usama.arif@bytedance.com>
Cc: linux-mm@kvack.org, muchun.song@linux.dev,
mike.kravetz@oracle.com, linux-kernel@vger.kernel.org,
songmuchun@bytedance.com, fam.zheng@bytedance.com,
liangma@liangbit.com, punit.agrawal@bytedance.com
Subject: Re: [v3 2/4] memblock: pass memblock_type to memblock_setclr_flag
Date: Mon, 28 Aug 2023 10:37:39 +0300 [thread overview]
Message-ID: <20230828073739.GB3223@kernel.org> (raw)
In-Reply-To: <20230825111836.1715308-3-usama.arif@bytedance.com>
On Fri, Aug 25, 2023 at 12:18:34PM +0100, Usama Arif wrote:
> This allows setting flags to both memblock types and is in preparation for
> setting flags (for e.g. to not initialize struct pages) on reserved
> memory region.
>
> Signed-off-by: Usama Arif <usama.arif@bytedance.com>
Reviewed-by: Mike Rapoport (IBM) <rppt@kernel.org>
> ---
> mm/memblock.c | 15 +++++++--------
> 1 file changed, 7 insertions(+), 8 deletions(-)
>
> diff --git a/mm/memblock.c b/mm/memblock.c
> index f9e61e565a53..43cb4404d94c 100644
> --- a/mm/memblock.c
> +++ b/mm/memblock.c
> @@ -896,10 +896,9 @@ int __init_memblock memblock_physmem_add(phys_addr_t base, phys_addr_t size)
> *
> * Return: 0 on success, -errno on failure.
> */
> -static int __init_memblock memblock_setclr_flag(phys_addr_t base,
> - phys_addr_t size, int set, int flag)
> +static int __init_memblock memblock_setclr_flag(struct memblock_type *type,
> + phys_addr_t base, phys_addr_t size, int set, int flag)
> {
> - struct memblock_type *type = &memblock.memory;
> int i, ret, start_rgn, end_rgn;
>
> ret = memblock_isolate_range(type, base, size, &start_rgn, &end_rgn);
> @@ -928,7 +927,7 @@ static int __init_memblock memblock_setclr_flag(phys_addr_t base,
> */
> int __init_memblock memblock_mark_hotplug(phys_addr_t base, phys_addr_t size)
> {
> - return memblock_setclr_flag(base, size, 1, MEMBLOCK_HOTPLUG);
> + return memblock_setclr_flag(&memblock.memory, base, size, 1, MEMBLOCK_HOTPLUG);
> }
>
> /**
> @@ -940,7 +939,7 @@ int __init_memblock memblock_mark_hotplug(phys_addr_t base, phys_addr_t size)
> */
> int __init_memblock memblock_clear_hotplug(phys_addr_t base, phys_addr_t size)
> {
> - return memblock_setclr_flag(base, size, 0, MEMBLOCK_HOTPLUG);
> + return memblock_setclr_flag(&memblock.memory, base, size, 0, MEMBLOCK_HOTPLUG);
> }
>
> /**
> @@ -957,7 +956,7 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
>
> system_has_some_mirror = true;
>
> - return memblock_setclr_flag(base, size, 1, MEMBLOCK_MIRROR);
> + return memblock_setclr_flag(&memblock.memory, base, size, 1, MEMBLOCK_MIRROR);
> }
>
> /**
> @@ -977,7 +976,7 @@ int __init_memblock memblock_mark_mirror(phys_addr_t base, phys_addr_t size)
> */
> int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
> {
> - return memblock_setclr_flag(base, size, 1, MEMBLOCK_NOMAP);
> + return memblock_setclr_flag(&memblock.memory, base, size, 1, MEMBLOCK_NOMAP);
> }
>
> /**
> @@ -989,7 +988,7 @@ int __init_memblock memblock_mark_nomap(phys_addr_t base, phys_addr_t size)
> */
> int __init_memblock memblock_clear_nomap(phys_addr_t base, phys_addr_t size)
> {
> - return memblock_setclr_flag(base, size, 0, MEMBLOCK_NOMAP);
> + return memblock_setclr_flag(&memblock.memory, base, size, 0, MEMBLOCK_NOMAP);
> }
>
> static bool should_skip_region(struct memblock_type *type,
> --
> 2.25.1
>
--
Sincerely yours,
Mike.
next prev parent reply other threads:[~2023-08-28 7:38 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-25 11:18 [v3 0/4] mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO Usama Arif
2023-08-25 11:18 ` [v3 1/4] mm: hugetlb_vmemmap: Use nid of the head page to reallocate it Usama Arif
2023-08-28 7:15 ` Muchun Song
2023-08-28 18:25 ` Mike Kravetz
2023-08-25 11:18 ` [v3 2/4] memblock: pass memblock_type to memblock_setclr_flag Usama Arif
2023-08-28 7:16 ` Muchun Song
2023-08-28 7:37 ` Mike Rapoport [this message]
2023-08-28 18:39 ` Mike Kravetz
2023-08-25 11:18 ` [v3 3/4] memblock: introduce MEMBLOCK_RSRV_NOINIT_VMEMMAP flag Usama Arif
2023-08-28 7:26 ` Muchun Song
2023-08-28 7:47 ` Mike Rapoport
2023-08-28 8:52 ` Muchun Song
2023-08-28 9:09 ` Mike Rapoport
2023-08-28 9:18 ` Muchun Song
2023-08-25 11:18 ` [v3 4/4] mm: hugetlb: Skip initialization of gigantic tail struct pages if freed by HVO Usama Arif
2023-08-28 11:33 ` Muchun Song
2023-08-28 21:04 ` Mike Kravetz
2023-08-29 3:33 ` Muchun Song
2023-08-29 3:47 ` Mike Kravetz
2023-08-30 10:27 ` [External] " Usama Arif
2023-08-31 6:21 ` [External] " Muchun Song
2023-08-31 9:58 ` Mel Gorman
2023-08-31 10:01 ` Muchun Song
2023-08-31 10:28 ` Mel Gorman
2023-08-31 7:33 ` [External] " Mike Rapoport
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230828073739.GB3223@kernel.org \
--to=rppt@kernel.org \
--cc=fam.zheng@bytedance.com \
--cc=liangma@liangbit.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=mike.kravetz@oracle.com \
--cc=muchun.song@linux.dev \
--cc=punit.agrawal@bytedance.com \
--cc=songmuchun@bytedance.com \
--cc=usama.arif@bytedance.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.