[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> This adds support for datagrams to the virtio-vsock device.
> 
> virtio-vsock already supports stream and seqpacket types. The existing
> message types and header fields are extended to support datagrams.
> Semantic differences between the flow types are stated, as well as any
> additional requirements for devices and drivers implementing this
> feature.
> 
> Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> ---
>  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>  1 file changed, 88 insertions(+), 7 deletions(-)
> 
> diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> index 7d91d159872f..638dca8e5da1 100644
> --- a/device-types/vsock/description.tex
> +++ b/device-types/vsock/description.tex
> @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>  \end{description}
>  
>  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>  consists of a (cid, port number) tuple. The header fields used for this are
>  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>  
> -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> +
> +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>  
>  \begin{lstlisting}
>  #define VIRTIO_VSOCK_TYPE_STREAM    1
>  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>  \end{lstlisting}
>  
>  Stream sockets provide in-order, guaranteed, connection-oriented delivery
>  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> -connection-oriented delivery with message and record boundaries.
> +connection-oriented delivery with message and record boundaries. Datagram
> +sockets provide connection-less, best-effort delivery of messages, with no
> +order or reliability guarantees.
>  
>  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>  communicating updates any time a change in buffer space occurs.
>  
> +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> +sockets. These fields are not used for datagram buffer space management.

no limits on datagram size?

also with no flow control at all there's a performance problem:
imagine queue gets full. now buffers begin to be dropped.
problem is, dropping is faster than delivering to application.
so now application sees its packets consumed super quickly
and starts sending even faster.
not good for performance.

yes datagram expects some way to drop packets but just disabling flow
control completely is not the right thing to do I think.


> +
>  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
>  
>  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
> @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>  \end{lstlisting}
>  
> +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Drivers MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Devices MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The driver MAY drop received packets with no notification to the device. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The device MAY drop received packets with no notification to the driver. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> +
> +\field{flags} may have the following bit set:
> +
> +\begin{lstlisting}
> +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> +\end{lstlisting}
> +
> +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> +it indicates that the current payload is the end of a datagram fragment OR that
> +the current payload is an entire datagram packet.
> +
> +Datagram fragmentation is subject to the following rules:
> +
> +The fragments for a datagram packet MUST be added to the virtqueue in
> +sequential order.
> +
> +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> +\field{flags} MUST be set.
> +
> +If a packet is the last fragment of a fragment sequence, then the
> +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> +
> +If a packet is any fragment except the last fragment of a fragment sequence,
> +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> +
> +If a driver or device has already placed a fragment of a packet on the
> +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> +before adding any additional packets or fragments to the virtqueue.
> +
> +If fragments for a packet are only partially received after an
> +implementation-specific amount of time, then the destination device or driver
> +MAY drop the fragments.

and how to detect this partial situation?

and if not then what happens?

> +Each buffer containing a fragment MUST begin with a valid struct
> +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> +only.

what does this mean exactly?

>  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>  
>  Certain events are communicated by the device to the driver using the event
> -- 
> 2.20.1


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> This adds support for datagrams to the virtio-vsock device.
> 
> virtio-vsock already supports stream and seqpacket types. The existing
> message types and header fields are extended to support datagrams.
> Semantic differences between the flow types are stated, as well as any
> additional requirements for devices and drivers implementing this
> feature.
> 
> Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> ---
>  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>  1 file changed, 88 insertions(+), 7 deletions(-)
> 
> diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> index 7d91d159872f..638dca8e5da1 100644
> --- a/device-types/vsock/description.tex
> +++ b/device-types/vsock/description.tex
> @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>  \end{description}
>  
>  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>  consists of a (cid, port number) tuple. The header fields used for this are
>  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>  
> -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> +
> +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>  
>  \begin{lstlisting}
>  #define VIRTIO_VSOCK_TYPE_STREAM    1
>  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>  \end{lstlisting}
>  
>  Stream sockets provide in-order, guaranteed, connection-oriented delivery
>  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> -connection-oriented delivery with message and record boundaries.
> +connection-oriented delivery with message and record boundaries. Datagram
> +sockets provide connection-less, best-effort delivery of messages, with no
> +order or reliability guarantees.
>  
>  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>  communicating updates any time a change in buffer space occurs.
>  
> +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> +sockets. These fields are not used for datagram buffer space management.

no limits on datagram size?

also with no flow control at all there's a performance problem:
imagine queue gets full. now buffers begin to be dropped.
problem is, dropping is faster than delivering to application.
so now application sees its packets consumed super quickly
and starts sending even faster.
not good for performance.

yes datagram expects some way to drop packets but just disabling flow
control completely is not the right thing to do I think.


> +
>  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
>  
>  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
> @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>  \end{lstlisting}
>  
> +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Drivers MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Devices MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The driver MAY drop received packets with no notification to the device. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The device MAY drop received packets with no notification to the driver. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> +
> +\field{flags} may have the following bit set:
> +
> +\begin{lstlisting}
> +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> +\end{lstlisting}
> +
> +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> +it indicates that the current payload is the end of a datagram fragment OR that
> +the current payload is an entire datagram packet.
> +
> +Datagram fragmentation is subject to the following rules:
> +
> +The fragments for a datagram packet MUST be added to the virtqueue in
> +sequential order.
> +
> +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> +\field{flags} MUST be set.
> +
> +If a packet is the last fragment of a fragment sequence, then the
> +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> +
> +If a packet is any fragment except the last fragment of a fragment sequence,
> +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> +
> +If a driver or device has already placed a fragment of a packet on the
> +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> +before adding any additional packets or fragments to the virtqueue.
> +
> +If fragments for a packet are only partially received after an
> +implementation-specific amount of time, then the destination device or driver
> +MAY drop the fragments.

and how to detect this partial situation?

and if not then what happens?

> +Each buffer containing a fragment MUST begin with a valid struct
> +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> +only.

what does this mean exactly?

>  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>  
>  Certain events are communicated by the device to the driver using the event
> -- 
> 2.20.1

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> This adds support for datagrams to the virtio-vsock device.
> 
> virtio-vsock already supports stream and seqpacket types. The existing
> message types and header fields are extended to support datagrams.
> Semantic differences between the flow types are stated, as well as any
> additional requirements for devices and drivers implementing this
> feature.
> 
> Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> ---
>  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>  1 file changed, 88 insertions(+), 7 deletions(-)
> 
> diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> index 7d91d159872f..638dca8e5da1 100644
> --- a/device-types/vsock/description.tex
> +++ b/device-types/vsock/description.tex
> @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>  \end{description}
>  
>  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>  consists of a (cid, port number) tuple. The header fields used for this are
>  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>  
> -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> +
> +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>  
>  \begin{lstlisting}
>  #define VIRTIO_VSOCK_TYPE_STREAM    1
>  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>  \end{lstlisting}
>  
>  Stream sockets provide in-order, guaranteed, connection-oriented delivery
>  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> -connection-oriented delivery with message and record boundaries.
> +connection-oriented delivery with message and record boundaries. Datagram
> +sockets provide connection-less, best-effort delivery of messages, with no
> +order or reliability guarantees.
>  
>  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>  communicating updates any time a change in buffer space occurs.
>  
> +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> +sockets. These fields are not used for datagram buffer space management.

no limits on datagram size?

also with no flow control at all there's a performance problem:
imagine queue gets full. now buffers begin to be dropped.
problem is, dropping is faster than delivering to application.
so now application sees its packets consumed super quickly
and starts sending even faster.
not good for performance.

yes datagram expects some way to drop packets but just disabling flow
control completely is not the right thing to do I think.


> +
>  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
>  
>  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> -sufficient free buffer space for the payload.
> +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> +transmitted when the peer has sufficient free buffer space for the payload.
>  
>  All packets associated with a stream flow MUST contain valid information in
>  \field{buf_alloc} and \field{fwd_cnt} fields.
> @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>  \end{lstlisting}
>  
> +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Drivers MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> +
> +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> +packet, they MUST follow the fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +Devices MUST support assembly of received packet fragments according to the
> +fragmentation rules described in section
> +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> +
> +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The driver MAY drop received packets with no notification to the device. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> +
> +The device MAY drop received packets with no notification to the driver. This
> +can happen if, for example, there are insufficient resources or no socket
> +exists for the destination address.
> +
> +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> +
> +\field{flags} may have the following bit set:
> +
> +\begin{lstlisting}
> +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> +\end{lstlisting}
> +
> +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> +it indicates that the current payload is the end of a datagram fragment OR that
> +the current payload is an entire datagram packet.
> +
> +Datagram fragmentation is subject to the following rules:
> +
> +The fragments for a datagram packet MUST be added to the virtqueue in
> +sequential order.
> +
> +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> +\field{flags} MUST be set.
> +
> +If a packet is the last fragment of a fragment sequence, then the
> +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> +
> +If a packet is any fragment except the last fragment of a fragment sequence,
> +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> +
> +If a driver or device has already placed a fragment of a packet on the
> +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> +before adding any additional packets or fragments to the virtqueue.
> +
> +If fragments for a packet are only partially received after an
> +implementation-specific amount of time, then the destination device or driver
> +MAY drop the fragments.

and how to detect this partial situation?

and if not then what happens?

> +Each buffer containing a fragment MUST begin with a valid struct
> +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> +only.

what does this mean exactly?

>  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>  
>  Certain events are communicated by the device to the driver using the event
> -- 
> 2.20.1


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > This adds support for datagrams to the virtio-vsock device.
> > 
> > virtio-vsock already supports stream and seqpacket types. The existing
> > message types and header fields are extended to support datagrams.
> > Semantic differences between the flow types are stated, as well as any
> > additional requirements for devices and drivers implementing this
> > feature.
> > 
> > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > ---
> >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> >  1 file changed, 88 insertions(+), 7 deletions(-)
> > 
> > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > index 7d91d159872f..638dca8e5da1 100644
> > --- a/device-types/vsock/description.tex
> > +++ b/device-types/vsock/description.tex
> > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> >  \end{description}
> >  
> >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> >  consists of a (cid, port number) tuple. The header fields used for this are
> >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> >  
> > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > +
> > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> >  
> >  \begin{lstlisting}
> >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> >  \end{lstlisting}
> >  
> >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > -connection-oriented delivery with message and record boundaries.
> > +connection-oriented delivery with message and record boundaries. Datagram
> > +sockets provide connection-less, best-effort delivery of messages, with no
> > +order or reliability guarantees.
> >  
> >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> >  communicating updates any time a change in buffer space occurs.
> >  
> > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > +sockets. These fields are not used for datagram buffer space management.
> 
> no limits on datagram size?
> 

In the Linux proof-of-concept, it is 64KB. I can add that here too.

> also with no flow control at all there's a performance problem:
> imagine queue gets full. now buffers begin to be dropped.
> problem is, dropping is faster than delivering to application.
> so now application sees its packets consumed super quickly
> and starts sending even faster.
> not good for performance.
> 
> yes datagram expects some way to drop packets but just disabling flow
> control completely is not the right thing to do I think.
> 

On the LKML I discussed using congestion notification as a way to handle
this situation, but deferred it to a future feature bit. I can build
it in from the beginning though.

> 
> > +
> >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > -sufficient free buffer space for the payload.
> > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > +transmitted when the peer has sufficient free buffer space for the payload.
> >  
> >  All packets associated with a stream flow MUST contain valid information in
> >  \field{buf_alloc} and \field{fwd_cnt} fields.
> >  
> >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > -sufficient free buffer space for the payload.
> > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > +transmitted when the peer has sufficient free buffer space for the payload.
> >  
> >  All packets associated with a stream flow MUST contain valid information in
> >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> >  \end{lstlisting}
> >  
> > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > +
> > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > +
> > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > +packet, they MUST follow the fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +Drivers MUST support assembly of received packet fragments according to the
> > +fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > +
> > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > +packet, they MUST follow the fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +Devices MUST support assembly of received packet fragments according to the
> > +fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > +
> > +The driver MAY drop received packets with no notification to the device. This
> > +can happen if, for example, there are insufficient resources or no socket
> > +exists for the destination address.
> > +
> > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > +
> > +The device MAY drop received packets with no notification to the driver. This
> > +can happen if, for example, there are insufficient resources or no socket
> > +exists for the destination address.
> > +
> > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > +
> > +\field{flags} may have the following bit set:
> > +
> > +\begin{lstlisting}
> > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > +\end{lstlisting}
> > +
> > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > +it indicates that the current payload is the end of a datagram fragment OR that
> > +the current payload is an entire datagram packet.
> > +
> > +Datagram fragmentation is subject to the following rules:
> > +
> > +The fragments for a datagram packet MUST be added to the virtqueue in
> > +sequential order.
> > +
> > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > +\field{flags} MUST be set.
> > +
> > +If a packet is the last fragment of a fragment sequence, then the
> > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > +
> > +If a packet is any fragment except the last fragment of a fragment sequence,
> > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > +
> > +If a driver or device has already placed a fragment of a packet on the
> > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > +before adding any additional packets or fragments to the virtqueue.
> > +
> > +If fragments for a packet are only partially received after an
> > +implementation-specific amount of time, then the destination device or driver
> > +MAY drop the fragments.
> 
> and how to detect this partial situation?
> 
> and if not then what happens?

All packets with EOM=0 should be added into a per-flow fragment list.

Once a packet with EOM=1 is received, they can all be concatenated and
delivered to the destination socket.

If after X time no packet with EOM=1 is received, then we have detected
this partial situation. The "then what happens part" is that the
fragment list can be dropped and freed. Because the peer must send the
remaining fragments, they will also be dropped and freed until EOM=1 is
received.

> 
> > +Each buffer containing a fragment MUST begin with a valid struct
> > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > +only.
> 
> what does this mean exactly?
> 

It means that len only accounts for the fragment and not the whole
(fragmented) packet. The second sentence means that the virtqueue buffer
starts with the header.

For virtio-net mergable RX buffers the header is only in the first
buffer and the length field accounts for the entire fragmented packet
(that spans multiple bufers), so I suspected the specification was
needed here too.

I'm happy to omit it.

> >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> >  
> >  Certain events are communicated by the device to the driver using the event
> > -- 
> > 2.20.1
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > >  \end{description}
> > >  
> > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > >  consists of a (cid, port number) tuple. The header fields used for this are
> > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > >  
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > >  
> > >  \begin{lstlisting}
> > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > >  \end{lstlisting}
> > >  
> > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > >  
> > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > >  communicating updates any time a change in buffer space occurs.
> > >  
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > 
> > no limits on datagram size?
> > 
> 
> In the Linux proof-of-concept, it is 64KB. I can add that here too.

or device driven maybe ...

> > also with no flow control at all there's a performance problem:
> > imagine queue gets full. now buffers begin to be dropped.
> > problem is, dropping is faster than delivering to application.
> > so now application sees its packets consumed super quickly
> > and starts sending even faster.
> > not good for performance.
> > 
> > yes datagram expects some way to drop packets but just disabling flow
> > control completely is not the right thing to do I think.
> > 
> 
> On the LKML I discussed using congestion notification as a way to handle
> this situation, but deferred it to a future feature bit. I can build
> it in from the beginning though.

as in messages to stop/start transmission? might work.

> > 
> > > +
> > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > >  
> > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > >  \end{lstlisting}
> > >  
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > +the current payload is an entire datagram packet.
> > > +
> > > +Datagram fragmentation is subject to the following rules:
> > > +
> > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > +sequential order.
> > > +
> > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > +\field{flags} MUST be set.
> > > +
> > > +If a packet is the last fragment of a fragment sequence, then the
> > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > +
> > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > +
> > > +If a driver or device has already placed a fragment of a packet on the
> > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > +before adding any additional packets or fragments to the virtqueue.
> > > +
> > > +If fragments for a packet are only partially received after an
> > > +implementation-specific amount of time, then the destination device or driver
> > > +MAY drop the fragments.
> > 
> > and how to detect this partial situation?
> > 
> > and if not then what happens?
> 
> All packets with EOM=0 should be added into a per-flow fragment list.
> 
> Once a packet with EOM=1 is received, they can all be concatenated and
> delivered to the destination socket.
> 
> If after X time no packet with EOM=1 is received, then we have detected
> this partial situation. The "then what happens part" is that the
> fragment list can be dropped and freed. Because the peer must send the
> remaining fragments, they will also be dropped and freed until EOM=1 is
> received.

aha. worth mentioning.

also all the must/may/should really belong in conformance
sections.


> > 
> > > +Each buffer containing a fragment MUST begin with a valid struct
> > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > +only.
> > 
> > what does this mean exactly?
> > 
> 
> It means that len only accounts for the fragment and not the whole
> (fragmented) packet. The second sentence means that the virtqueue buffer
> starts with the header.
> 
> For virtio-net mergable RX buffers the header is only in the first
> buffer and the length field accounts for the entire fragmented packet
> (that spans multiple bufers), so I suspected the specification was
> needed here too.
> 
> I'm happy to omit it.
> > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > >  
> > >  Certain events are communicated by the device to the driver using the event
> > > -- 
> > > 2.20.1
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > >  \end{description}
> > >  
> > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > >  consists of a (cid, port number) tuple. The header fields used for this are
> > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > >  
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > >  
> > >  \begin{lstlisting}
> > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > >  \end{lstlisting}
> > >  
> > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > >  
> > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > >  communicating updates any time a change in buffer space occurs.
> > >  
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > 
> > no limits on datagram size?
> > 
> 
> In the Linux proof-of-concept, it is 64KB. I can add that here too.

or device driven maybe ...

> > also with no flow control at all there's a performance problem:
> > imagine queue gets full. now buffers begin to be dropped.
> > problem is, dropping is faster than delivering to application.
> > so now application sees its packets consumed super quickly
> > and starts sending even faster.
> > not good for performance.
> > 
> > yes datagram expects some way to drop packets but just disabling flow
> > control completely is not the right thing to do I think.
> > 
> 
> On the LKML I discussed using congestion notification as a way to handle
> this situation, but deferred it to a future feature bit. I can build
> it in from the beginning though.

as in messages to stop/start transmission? might work.

> > 
> > > +
> > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > >  
> > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > >  \end{lstlisting}
> > >  
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > +the current payload is an entire datagram packet.
> > > +
> > > +Datagram fragmentation is subject to the following rules:
> > > +
> > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > +sequential order.
> > > +
> > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > +\field{flags} MUST be set.
> > > +
> > > +If a packet is the last fragment of a fragment sequence, then the
> > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > +
> > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > +
> > > +If a driver or device has already placed a fragment of a packet on the
> > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > +before adding any additional packets or fragments to the virtqueue.
> > > +
> > > +If fragments for a packet are only partially received after an
> > > +implementation-specific amount of time, then the destination device or driver
> > > +MAY drop the fragments.
> > 
> > and how to detect this partial situation?
> > 
> > and if not then what happens?
> 
> All packets with EOM=0 should be added into a per-flow fragment list.
> 
> Once a packet with EOM=1 is received, they can all be concatenated and
> delivered to the destination socket.
> 
> If after X time no packet with EOM=1 is received, then we have detected
> this partial situation. The "then what happens part" is that the
> fragment list can be dropped and freed. Because the peer must send the
> remaining fragments, they will also be dropped and freed until EOM=1 is
> received.

aha. worth mentioning.

also all the must/may/should really belong in conformance
sections.


> > 
> > > +Each buffer containing a fragment MUST begin with a valid struct
> > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > +only.
> > 
> > what does this mean exactly?
> > 
> 
> It means that len only accounts for the fragment and not the whole
> (fragmented) packet. The second sentence means that the virtqueue buffer
> starts with the header.
> 
> For virtio-net mergable RX buffers the header is only in the first
> buffer and the length field accounts for the entire fragmented packet
> (that spans multiple bufers), so I suspected the specification was
> needed here too.
> 
> I'm happy to omit it.
> > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > >  
> > >  Certain events are communicated by the device to the driver using the event
> > > -- 
> > > 2.20.1
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > >  \end{description}
> > >  
> > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > >  consists of a (cid, port number) tuple. The header fields used for this are
> > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > >  
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > >  
> > >  \begin{lstlisting}
> > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > >  \end{lstlisting}
> > >  
> > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > >  
> > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > >  communicating updates any time a change in buffer space occurs.
> > >  
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > 
> > no limits on datagram size?
> > 
> 
> In the Linux proof-of-concept, it is 64KB. I can add that here too.

or device driven maybe ...

> > also with no flow control at all there's a performance problem:
> > imagine queue gets full. now buffers begin to be dropped.
> > problem is, dropping is faster than delivering to application.
> > so now application sees its packets consumed super quickly
> > and starts sending even faster.
> > not good for performance.
> > 
> > yes datagram expects some way to drop packets but just disabling flow
> > control completely is not the right thing to do I think.
> > 
> 
> On the LKML I discussed using congestion notification as a way to handle
> this situation, but deferred it to a future feature bit. I can build
> it in from the beginning though.

as in messages to stop/start transmission? might work.

> > 
> > > +
> > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > >  
> > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > >  
> > >  All packets associated with a stream flow MUST contain valid information in
> > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > >  \end{lstlisting}
> > >  
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > +the current payload is an entire datagram packet.
> > > +
> > > +Datagram fragmentation is subject to the following rules:
> > > +
> > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > +sequential order.
> > > +
> > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > +\field{flags} MUST be set.
> > > +
> > > +If a packet is the last fragment of a fragment sequence, then the
> > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > +
> > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > +
> > > +If a driver or device has already placed a fragment of a packet on the
> > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > +before adding any additional packets or fragments to the virtqueue.
> > > +
> > > +If fragments for a packet are only partially received after an
> > > +implementation-specific amount of time, then the destination device or driver
> > > +MAY drop the fragments.
> > 
> > and how to detect this partial situation?
> > 
> > and if not then what happens?
> 
> All packets with EOM=0 should be added into a per-flow fragment list.
> 
> Once a packet with EOM=1 is received, they can all be concatenated and
> delivered to the destination socket.
> 
> If after X time no packet with EOM=1 is received, then we have detected
> this partial situation. The "then what happens part" is that the
> fragment list can be dropped and freed. Because the peer must send the
> remaining fragments, they will also be dropped and freed until EOM=1 is
> received.

aha. worth mentioning.

also all the must/may/should really belong in conformance
sections.


> > 
> > > +Each buffer containing a fragment MUST begin with a valid struct
> > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > +only.
> > 
> > what does this mean exactly?
> > 
> 
> It means that len only accounts for the fragment and not the whole
> (fragmented) packet. The second sentence means that the virtqueue buffer
> starts with the header.
> 
> For virtio-net mergable RX buffers the header is only in the first
> buffer and the length field accounts for the entire fragmented packet
> (that spans multiple bufers), so I suspected the specification was
> needed here too.
> 
> I'm happy to omit it.
> > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > >  
> > >  Certain events are communicated by the device to the driver using the event
> > > -- 
> > > 2.20.1
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > This adds support for datagrams to the virtio-vsock device.
> > > > 
> > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > message types and header fields are extended to support datagrams.
> > > > Semantic differences between the flow types are stated, as well as any
> > > > additional requirements for devices and drivers implementing this
> > > > feature.
> > > > 
> > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > ---
> > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > 
> > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > index 7d91d159872f..638dca8e5da1 100644
> > > > --- a/device-types/vsock/description.tex
> > > > +++ b/device-types/vsock/description.tex
> > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > >  \end{description}
> > > >  
> > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > >  
> > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > +
> > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > >  
> > > >  \begin{lstlisting}
> > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > >  \end{lstlisting}
> > > >  
> > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > -connection-oriented delivery with message and record boundaries.
> > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > +order or reliability guarantees.
> > > >  
> > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > >  communicating updates any time a change in buffer space occurs.
> > > >  
> > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > +sockets. These fields are not used for datagram buffer space management.
> > > 
> > > no limits on datagram size?
> > > 
> > 
> > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> 
> or device driven maybe ...
> 

Ah yes, I think Stefano was suggesting something like Laura's proposal:
https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html

> > > also with no flow control at all there's a performance problem:
> > > imagine queue gets full. now buffers begin to be dropped.
> > > problem is, dropping is faster than delivering to application.
> > > so now application sees its packets consumed super quickly
> > > and starts sending even faster.
> > > not good for performance.
> > > 
> > > yes datagram expects some way to drop packets but just disabling flow
> > > control completely is not the right thing to do I think.
> > > 
> > 
> > On the LKML I discussed using congestion notification as a way to handle
> > this situation, but deferred it to a future feature bit. I can build
> > it in from the beginning though.
> 
> as in messages to stop/start transmission? might work.
> 

Yes, say for example that a flow is sending a large number of packets
and the destination socket's receive queue becomes full. The destination
sends a "stop" message with the destination address. More packets are
likely to continue trailing in, and they may be dropped. The source
device or driver will use the destination address to throttle further
attempts of sockets to transmit to that destination, and the flow will
stop.

After the socket's receive queue is no longer full, it may notify the
device/driver which can then send a "start" message with the destination
address to any previously "stopped" sources. The sources can then
reenable flows to that destination.

The other alternative I evaluated was using a single "stop for some
time" message with an exponential or fibonacci backoff with a ceiling,
but the downside is that a congested queue could block the "stop"
message from reaching the source and eventually the source would become
unthrottled even though the destination is *trying* to throttle it. I
think this is bad for some pretty abusable cases, such as creating a
socket that has no receiver. A stop/start message pair doesn't have this
issue.

> > > 
> > > > +
> > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > -sufficient free buffer space for the payload.
> > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > >  
> > > >  All packets associated with a stream flow MUST contain valid information in
> > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > >  
> > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > -sufficient free buffer space for the payload.
> > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > >  
> > > >  All packets associated with a stream flow MUST contain valid information in
> > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > >  \end{lstlisting}
> > > >  
> > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > +
> > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > +
> > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > +packet, they MUST follow the fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > +fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > +
> > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > +packet, they MUST follow the fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +Devices MUST support assembly of received packet fragments according to the
> > > > +fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > +
> > > > +The driver MAY drop received packets with no notification to the device. This
> > > > +can happen if, for example, there are insufficient resources or no socket
> > > > +exists for the destination address.
> > > > +
> > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > +
> > > > +The device MAY drop received packets with no notification to the driver. This
> > > > +can happen if, for example, there are insufficient resources or no socket
> > > > +exists for the destination address.
> > > > +
> > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > +
> > > > +\field{flags} may have the following bit set:
> > > > +
> > > > +\begin{lstlisting}
> > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > +\end{lstlisting}
> > > > +
> > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > +the current payload is an entire datagram packet.
> > > > +
> > > > +Datagram fragmentation is subject to the following rules:
> > > > +
> > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > +sequential order.
> > > > +
> > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > +\field{flags} MUST be set.
> > > > +
> > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > +
> > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > +
> > > > +If a driver or device has already placed a fragment of a packet on the
> > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > +before adding any additional packets or fragments to the virtqueue.
> > > > +
> > > > +If fragments for a packet are only partially received after an
> > > > +implementation-specific amount of time, then the destination device or driver
> > > > +MAY drop the fragments.
> > > 
> > > and how to detect this partial situation?
> > > 
> > > and if not then what happens?
> > 
> > All packets with EOM=0 should be added into a per-flow fragment list.
> > 
> > Once a packet with EOM=1 is received, they can all be concatenated and
> > delivered to the destination socket.
> > 
> > If after X time no packet with EOM=1 is received, then we have detected
> > this partial situation. The "then what happens part" is that the
> > fragment list can be dropped and freed. Because the peer must send the
> > remaining fragments, they will also be dropped and freed until EOM=1 is
> > received.
> 
> aha. worth mentioning.
> 
> also all the must/may/should really belong in conformance
> sections.
> 

Got it, will do.

> 
> > > 
> > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > +only.
> > > 
> > > what does this mean exactly?
> > > 
> > 
> > It means that len only accounts for the fragment and not the whole
> > (fragmented) packet. The second sentence means that the virtqueue buffer
> > starts with the header.
> > 
> > For virtio-net mergable RX buffers the header is only in the first
> > buffer and the length field accounts for the entire fragmented packet
> > (that spans multiple bufers), so I suspected the specification was
> > needed here too.
> > 
> > I'm happy to omit it.
> > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > >  
> > > >  Certain events are communicated by the device to the driver using the event
> > > > -- 
> > > > 2.20.1
> > > 
> > > _______________________________________________
> > > Virtualization mailing list
> > > Virtualization@lists.linux-foundation.org
> > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > 
> > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > message types and header fields are extended to support datagrams.
> > > > > Semantic differences between the flow types are stated, as well as any
> > > > > additional requirements for devices and drivers implementing this
> > > > > feature.
> > > > > 
> > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > ---
> > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > 
> > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > --- a/device-types/vsock/description.tex
> > > > > +++ b/device-types/vsock/description.tex
> > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > >  \end{description}
> > > > >  
> > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > >  
> > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > +
> > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > >  
> > > > >  \begin{lstlisting}
> > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > >  \end{lstlisting}
> > > > >  
> > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > -connection-oriented delivery with message and record boundaries.
> > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > +order or reliability guarantees.
> > > > >  
> > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > >  communicating updates any time a change in buffer space occurs.
> > > > >  
> > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > 
> > > > no limits on datagram size?
> > > > 
> > > 
> > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > 
> > or device driven maybe ...
> > 
> 
> Ah yes, I think Stefano was suggesting something like Laura's proposal:
> https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> 
> > > > also with no flow control at all there's a performance problem:
> > > > imagine queue gets full. now buffers begin to be dropped.
> > > > problem is, dropping is faster than delivering to application.
> > > > so now application sees its packets consumed super quickly
> > > > and starts sending even faster.
> > > > not good for performance.
> > > > 
> > > > yes datagram expects some way to drop packets but just disabling flow
> > > > control completely is not the right thing to do I think.
> > > > 
> > > 
> > > On the LKML I discussed using congestion notification as a way to handle
> > > this situation, but deferred it to a future feature bit. I can build
> > > it in from the beginning though.
> > 
> > as in messages to stop/start transmission? might work.
> > 
> 
> Yes, say for example that a flow is sending a large number of packets
> and the destination socket's receive queue becomes full. The destination
> sends a "stop" message with the destination address. More packets are
> likely to continue trailing in, and they may be dropped. The source
> device or driver will use the destination address to throttle further
> attempts of sockets to transmit to that destination, and the flow will
> stop.
> 
> After the socket's receive queue is no longer full, it may notify the
> device/driver which can then send a "start" message with the destination
> address to any previously "stopped" sources. The sources can then
> reenable flows to that destination.

Ah so control is actually per socket. Another idea is that does not have
to be completely full - we can start suppressing a bit before it's full
to reduce packet drops.

> 
> The other alternative I evaluated was using a single "stop for some
> time" message with an exponential or fibonacci backoff with a ceiling,
> but the downside is that a congested queue could block the "stop"
> message from reaching the source and eventually the source would become
> unthrottled even though the destination is *trying* to throttle it. I
> think this is bad for some pretty abusable cases, such as creating a
> socket that has no receiver. A stop/start message pair doesn't have this
> issue.
> > > > 
> > > > > +
> > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > >  
> > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > >  \end{lstlisting}
> > > > >  
> > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +\field{flags} may have the following bit set:
> > > > > +
> > > > > +\begin{lstlisting}
> > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > +\end{lstlisting}
> > > > > +
> > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > +the current payload is an entire datagram packet.
> > > > > +
> > > > > +Datagram fragmentation is subject to the following rules:
> > > > > +
> > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > +sequential order.
> > > > > +
> > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > +\field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > +
> > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > +
> > > > > +If fragments for a packet are only partially received after an
> > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > +MAY drop the fragments.
> > > > 
> > > > and how to detect this partial situation?
> > > > 
> > > > and if not then what happens?
> > > 
> > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > 
> > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > delivered to the destination socket.
> > > 
> > > If after X time no packet with EOM=1 is received, then we have detected
> > > this partial situation. The "then what happens part" is that the
> > > fragment list can be dropped and freed. Because the peer must send the
> > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > received.
> > 
> > aha. worth mentioning.
> > 
> > also all the must/may/should really belong in conformance
> > sections.
> > 
> 
> Got it, will do.
> 
> > 
> > > > 
> > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > +only.
> > > > 
> > > > what does this mean exactly?
> > > > 
> > > 
> > > It means that len only accounts for the fragment and not the whole
> > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > starts with the header.
> > > 
> > > For virtio-net mergable RX buffers the header is only in the first
> > > buffer and the length field accounts for the entire fragmented packet
> > > (that spans multiple bufers), so I suspected the specification was
> > > needed here too.
> > > 
> > > I'm happy to omit it.
> > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > >  
> > > > >  Certain events are communicated by the device to the driver using the event
> > > > > -- 
> > > > > 2.20.1
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > 
> > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > message types and header fields are extended to support datagrams.
> > > > > Semantic differences between the flow types are stated, as well as any
> > > > > additional requirements for devices and drivers implementing this
> > > > > feature.
> > > > > 
> > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > ---
> > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > 
> > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > --- a/device-types/vsock/description.tex
> > > > > +++ b/device-types/vsock/description.tex
> > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > >  \end{description}
> > > > >  
> > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > >  
> > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > +
> > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > >  
> > > > >  \begin{lstlisting}
> > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > >  \end{lstlisting}
> > > > >  
> > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > -connection-oriented delivery with message and record boundaries.
> > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > +order or reliability guarantees.
> > > > >  
> > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > >  communicating updates any time a change in buffer space occurs.
> > > > >  
> > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > 
> > > > no limits on datagram size?
> > > > 
> > > 
> > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > 
> > or device driven maybe ...
> > 
> 
> Ah yes, I think Stefano was suggesting something like Laura's proposal:
> https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> 
> > > > also with no flow control at all there's a performance problem:
> > > > imagine queue gets full. now buffers begin to be dropped.
> > > > problem is, dropping is faster than delivering to application.
> > > > so now application sees its packets consumed super quickly
> > > > and starts sending even faster.
> > > > not good for performance.
> > > > 
> > > > yes datagram expects some way to drop packets but just disabling flow
> > > > control completely is not the right thing to do I think.
> > > > 
> > > 
> > > On the LKML I discussed using congestion notification as a way to handle
> > > this situation, but deferred it to a future feature bit. I can build
> > > it in from the beginning though.
> > 
> > as in messages to stop/start transmission? might work.
> > 
> 
> Yes, say for example that a flow is sending a large number of packets
> and the destination socket's receive queue becomes full. The destination
> sends a "stop" message with the destination address. More packets are
> likely to continue trailing in, and they may be dropped. The source
> device or driver will use the destination address to throttle further
> attempts of sockets to transmit to that destination, and the flow will
> stop.
> 
> After the socket's receive queue is no longer full, it may notify the
> device/driver which can then send a "start" message with the destination
> address to any previously "stopped" sources. The sources can then
> reenable flows to that destination.

Ah so control is actually per socket. Another idea is that does not have
to be completely full - we can start suppressing a bit before it's full
to reduce packet drops.

> 
> The other alternative I evaluated was using a single "stop for some
> time" message with an exponential or fibonacci backoff with a ceiling,
> but the downside is that a congested queue could block the "stop"
> message from reaching the source and eventually the source would become
> unthrottled even though the destination is *trying* to throttle it. I
> think this is bad for some pretty abusable cases, such as creating a
> socket that has no receiver. A stop/start message pair doesn't have this
> issue.
> > > > 
> > > > > +
> > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > >  
> > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > >  \end{lstlisting}
> > > > >  
> > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +\field{flags} may have the following bit set:
> > > > > +
> > > > > +\begin{lstlisting}
> > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > +\end{lstlisting}
> > > > > +
> > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > +the current payload is an entire datagram packet.
> > > > > +
> > > > > +Datagram fragmentation is subject to the following rules:
> > > > > +
> > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > +sequential order.
> > > > > +
> > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > +\field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > +
> > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > +
> > > > > +If fragments for a packet are only partially received after an
> > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > +MAY drop the fragments.
> > > > 
> > > > and how to detect this partial situation?
> > > > 
> > > > and if not then what happens?
> > > 
> > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > 
> > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > delivered to the destination socket.
> > > 
> > > If after X time no packet with EOM=1 is received, then we have detected
> > > this partial situation. The "then what happens part" is that the
> > > fragment list can be dropped and freed. Because the peer must send the
> > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > received.
> > 
> > aha. worth mentioning.
> > 
> > also all the must/may/should really belong in conformance
> > sections.
> > 
> 
> Got it, will do.
> 
> > 
> > > > 
> > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > +only.
> > > > 
> > > > what does this mean exactly?
> > > > 
> > > 
> > > It means that len only accounts for the fragment and not the whole
> > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > starts with the header.
> > > 
> > > For virtio-net mergable RX buffers the header is only in the first
> > > buffer and the length field accounts for the entire fragmented packet
> > > (that spans multiple bufers), so I suspected the specification was
> > > needed here too.
> > > 
> > > I'm happy to omit it.
> > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > >  
> > > > >  Certain events are communicated by the device to the driver using the event
> > > > > -- 
> > > > > 2.20.1
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > 
> > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > message types and header fields are extended to support datagrams.
> > > > > Semantic differences between the flow types are stated, as well as any
> > > > > additional requirements for devices and drivers implementing this
> > > > > feature.
> > > > > 
> > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > ---
> > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > 
> > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > --- a/device-types/vsock/description.tex
> > > > > +++ b/device-types/vsock/description.tex
> > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > >  \end{description}
> > > > >  
> > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > >  
> > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > +
> > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > >  
> > > > >  \begin{lstlisting}
> > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > >  \end{lstlisting}
> > > > >  
> > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > -connection-oriented delivery with message and record boundaries.
> > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > +order or reliability guarantees.
> > > > >  
> > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > >  communicating updates any time a change in buffer space occurs.
> > > > >  
> > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > 
> > > > no limits on datagram size?
> > > > 
> > > 
> > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > 
> > or device driven maybe ...
> > 
> 
> Ah yes, I think Stefano was suggesting something like Laura's proposal:
> https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> 
> > > > also with no flow control at all there's a performance problem:
> > > > imagine queue gets full. now buffers begin to be dropped.
> > > > problem is, dropping is faster than delivering to application.
> > > > so now application sees its packets consumed super quickly
> > > > and starts sending even faster.
> > > > not good for performance.
> > > > 
> > > > yes datagram expects some way to drop packets but just disabling flow
> > > > control completely is not the right thing to do I think.
> > > > 
> > > 
> > > On the LKML I discussed using congestion notification as a way to handle
> > > this situation, but deferred it to a future feature bit. I can build
> > > it in from the beginning though.
> > 
> > as in messages to stop/start transmission? might work.
> > 
> 
> Yes, say for example that a flow is sending a large number of packets
> and the destination socket's receive queue becomes full. The destination
> sends a "stop" message with the destination address. More packets are
> likely to continue trailing in, and they may be dropped. The source
> device or driver will use the destination address to throttle further
> attempts of sockets to transmit to that destination, and the flow will
> stop.
> 
> After the socket's receive queue is no longer full, it may notify the
> device/driver which can then send a "start" message with the destination
> address to any previously "stopped" sources. The sources can then
> reenable flows to that destination.

Ah so control is actually per socket. Another idea is that does not have
to be completely full - we can start suppressing a bit before it's full
to reduce packet drops.

> 
> The other alternative I evaluated was using a single "stop for some
> time" message with an exponential or fibonacci backoff with a ceiling,
> but the downside is that a congested queue could block the "stop"
> message from reaching the source and eventually the source would become
> unthrottled even though the destination is *trying* to throttle it. I
> think this is bad for some pretty abusable cases, such as creating a
> socket that has no receiver. A stop/start message pair doesn't have this
> issue.
> > > > 
> > > > > +
> > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > >  
> > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >  
> > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > >  \end{lstlisting}
> > > > >  
> > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +\field{flags} may have the following bit set:
> > > > > +
> > > > > +\begin{lstlisting}
> > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > +\end{lstlisting}
> > > > > +
> > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > +the current payload is an entire datagram packet.
> > > > > +
> > > > > +Datagram fragmentation is subject to the following rules:
> > > > > +
> > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > +sequential order.
> > > > > +
> > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > +\field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > +
> > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > +
> > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > +
> > > > > +If fragments for a packet are only partially received after an
> > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > +MAY drop the fragments.
> > > > 
> > > > and how to detect this partial situation?
> > > > 
> > > > and if not then what happens?
> > > 
> > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > 
> > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > delivered to the destination socket.
> > > 
> > > If after X time no packet with EOM=1 is received, then we have detected
> > > this partial situation. The "then what happens part" is that the
> > > fragment list can be dropped and freed. Because the peer must send the
> > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > received.
> > 
> > aha. worth mentioning.
> > 
> > also all the must/may/should really belong in conformance
> > sections.
> > 
> 
> Got it, will do.
> 
> > 
> > > > 
> > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > +only.
> > > > 
> > > > what does this mean exactly?
> > > > 
> > > 
> > > It means that len only accounts for the fragment and not the whole
> > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > starts with the header.
> > > 
> > > For virtio-net mergable RX buffers the header is only in the first
> > > buffer and the length field accounts for the entire fragmented packet
> > > (that spans multiple bufers), so I suspected the specification was
> > > needed here too.
> > > 
> > > I'm happy to omit it.
> > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > >  
> > > > >  Certain events are communicated by the device to the driver using the event
> > > > > -- 
> > > > > 2.20.1
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Sat, Sep 02, 2023 at 04:41:28AM -0400, Michael S. Tsirkin wrote:
> On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> > On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > > 
> > > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > > message types and header fields are extended to support datagrams.
> > > > > > Semantic differences between the flow types are stated, as well as any
> > > > > > additional requirements for devices and drivers implementing this
> > > > > > feature.
> > > > > > 
> > > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > > ---
> > > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > > 
> > > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > > --- a/device-types/vsock/description.tex
> > > > > > +++ b/device-types/vsock/description.tex
> > > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > >  \end{description}
> > > > > >  
> > > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > > >  
> > > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > > +
> > > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > > >  
> > > > > >  \begin{lstlisting}
> > > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > >  \end{lstlisting}
> > > > > >  
> > > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > > -connection-oriented delivery with message and record boundaries.
> > > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > > +order or reliability guarantees.
> > > > > >  
> > > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > >  communicating updates any time a change in buffer space occurs.
> > > > > >  
> > > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > 
> > > > > no limits on datagram size?
> > > > > 
> > > > 
> > > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > > 
> > > or device driven maybe ...
> > > 
> > 
> > Ah yes, I think Stefano was suggesting something like Laura's proposal:
> > https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> > 
> > > > > also with no flow control at all there's a performance problem:
> > > > > imagine queue gets full. now buffers begin to be dropped.
> > > > > problem is, dropping is faster than delivering to application.
> > > > > so now application sees its packets consumed super quickly
> > > > > and starts sending even faster.
> > > > > not good for performance.
> > > > > 
> > > > > yes datagram expects some way to drop packets but just disabling flow
> > > > > control completely is not the right thing to do I think.
> > > > > 
> > > > 
> > > > On the LKML I discussed using congestion notification as a way to handle
> > > > this situation, but deferred it to a future feature bit. I can build
> > > > it in from the beginning though.
> > > 
> > > as in messages to stop/start transmission? might work.
> > > 
> > 
> > Yes, say for example that a flow is sending a large number of packets
> > and the destination socket's receive queue becomes full. The destination
> > sends a "stop" message with the destination address. More packets are
> > likely to continue trailing in, and they may be dropped. The source
> > device or driver will use the destination address to throttle further
> > attempts of sockets to transmit to that destination, and the flow will
> > stop.
> > 
> > After the socket's receive queue is no longer full, it may notify the
> > device/driver which can then send a "start" message with the destination
> > address to any previously "stopped" sources. The sources can then
> > reenable flows to that destination.
> 
> Ah so control is actually per socket. Another idea is that does not have
> to be completely full - we can start suppressing a bit before it's full
> to reduce packet drops.
> 

Totally, yes that makes sense.

> > 
> > The other alternative I evaluated was using a single "stop for some
> > time" message with an exponential or fibonacci backoff with a ceiling,
> > but the downside is that a congested queue could block the "stop"
> > message from reaching the source and eventually the source would become
> > unthrottled even though the destination is *trying* to throttle it. I
> > think this is bad for some pretty abusable cases, such as creating a
> > socket that has no receiver. A stop/start message pair doesn't have this
> > issue.
> > > > > 
> > > > > > +
> > > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > -sufficient free buffer space for the payload.
> > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > >  
> > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > >  
> > > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > -sufficient free buffer space for the payload.
> > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > >  
> > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > >  \end{lstlisting}
> > > > > >  
> > > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > > +
> > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > +
> > > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > +
> > > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > > +fragmentation rules described in section
> > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > +
> > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > +
> > > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > +
> > > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > > +fragmentation rules described in section
> > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > +
> > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > +
> > > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > +exists for the destination address.
> > > > > > +
> > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > +
> > > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > +exists for the destination address.
> > > > > > +
> > > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > > +
> > > > > > +\field{flags} may have the following bit set:
> > > > > > +
> > > > > > +\begin{lstlisting}
> > > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > > +\end{lstlisting}
> > > > > > +
> > > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > > +the current payload is an entire datagram packet.
> > > > > > +
> > > > > > +Datagram fragmentation is subject to the following rules:
> > > > > > +
> > > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > > +sequential order.
> > > > > > +
> > > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > > +\field{flags} MUST be set.
> > > > > > +
> > > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > > +
> > > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > > +
> > > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > > +
> > > > > > +If fragments for a packet are only partially received after an
> > > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > > +MAY drop the fragments.
> > > > > 
> > > > > and how to detect this partial situation?
> > > > > 
> > > > > and if not then what happens?
> > > > 
> > > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > > 
> > > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > > delivered to the destination socket.
> > > > 
> > > > If after X time no packet with EOM=1 is received, then we have detected
> > > > this partial situation. The "then what happens part" is that the
> > > > fragment list can be dropped and freed. Because the peer must send the
> > > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > > received.
> > > 
> > > aha. worth mentioning.
> > > 
> > > also all the must/may/should really belong in conformance
> > > sections.
> > > 
> > 
> > Got it, will do.
> > 
> > > 
> > > > > 
> > > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > > +only.
> > > > > 
> > > > > what does this mean exactly?
> > > > > 
> > > > 
> > > > It means that len only accounts for the fragment and not the whole
> > > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > > starts with the header.
> > > > 
> > > > For virtio-net mergable RX buffers the header is only in the first
> > > > buffer and the length field accounts for the entire fragmented packet
> > > > (that spans multiple bufers), so I suspected the specification was
> > > > needed here too.
> > > > 
> > > > I'm happy to omit it.
> > > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > > >  
> > > > > >  Certain events are communicated by the device to the driver using the event
> > > > > > -- 
> > > > > > 2.20.1
> > > > > 
> > > > > _______________________________________________
> > > > > Virtualization mailing list
> > > > > Virtualization@lists.linux-foundation.org
> > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > 
> > > _______________________________________________
> > > Virtualization mailing list
> > > Virtualization@lists.linux-foundation.org
> > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> 
> _______________________________________________
> Virtualization mailing list
> Virtualization@lists.linux-foundation.org
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 09:24:26AM +0000, Bobby Eshleman wrote:
> On Sat, Sep 02, 2023 at 04:41:28AM -0400, Michael S. Tsirkin wrote:
> > On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> > > On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > > > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > > > 
> > > > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > > > message types and header fields are extended to support datagrams.
> > > > > > > Semantic differences between the flow types are stated, as well as any
> > > > > > > additional requirements for devices and drivers implementing this
> > > > > > > feature.
> > > > > > > 
> > > > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > > > ---
> > > > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > > > --- a/device-types/vsock/description.tex
> > > > > > > +++ b/device-types/vsock/description.tex
> > > > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > > >  \end{description}
> > > > > > >  
> > > > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > > > >  
> > > > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > > > +
> > > > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > > > >  
> > > > > > >  \begin{lstlisting}
> > > > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > > > -connection-oriented delivery with message and record boundaries.
> > > > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > > > +order or reliability guarantees.
> > > > > > >  
> > > > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > > >  communicating updates any time a change in buffer space occurs.
> > > > > > >  
> > > > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > > 
> > > > > > no limits on datagram size?
> > > > > > 
> > > > > 
> > > > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > > > 
> > > > or device driven maybe ...
> > > > 
> > > 
> > > Ah yes, I think Stefano was suggesting something like Laura's proposal:
> > > https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> > > 
> > > > > > also with no flow control at all there's a performance problem:
> > > > > > imagine queue gets full. now buffers begin to be dropped.
> > > > > > problem is, dropping is faster than delivering to application.
> > > > > > so now application sees its packets consumed super quickly
> > > > > > and starts sending even faster.
> > > > > > not good for performance.
> > > > > > 
> > > > > > yes datagram expects some way to drop packets but just disabling flow
> > > > > > control completely is not the right thing to do I think.
> > > > > > 
> > > > > 
> > > > > On the LKML I discussed using congestion notification as a way to handle
> > > > > this situation, but deferred it to a future feature bit. I can build
> > > > > it in from the beginning though.
> > > > 
> > > > as in messages to stop/start transmission? might work.
> > > > 
> > > 
> > > Yes, say for example that a flow is sending a large number of packets
> > > and the destination socket's receive queue becomes full. The destination
> > > sends a "stop" message with the destination address. More packets are
> > > likely to continue trailing in, and they may be dropped. The source
> > > device or driver will use the destination address to throttle further
> > > attempts of sockets to transmit to that destination, and the flow will
> > > stop.
> > > 
> > > After the socket's receive queue is no longer full, it may notify the
> > > device/driver which can then send a "start" message with the destination
> > > address to any previously "stopped" sources. The sources can then
> > > reenable flows to that destination.
> > 
> > Ah so control is actually per socket. Another idea is that does not have
> > to be completely full - we can start suppressing a bit before it's full
> > to reduce packet drops.
> > 
> 
> Totally, yes that makes sense.


I don't know how we prevent blocking traffic to unrelated
destinations in this case though.  Do we have to?

> > > 
> > > The other alternative I evaluated was using a single "stop for some
> > > time" message with an exponential or fibonacci backoff with a ceiling,
> > > but the downside is that a congested queue could block the "stop"
> > > message from reaching the source and eventually the source would become
> > > unthrottled even though the destination is *trying* to throttle it. I
> > > think this is bad for some pretty abusable cases, such as creating a
> > > socket that has no receiver. A stop/start message pair doesn't have this
> > > issue.
> > > > > > 
> > > > > > > +
> > > > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > >  
> > > > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +\field{flags} may have the following bit set:
> > > > > > > +
> > > > > > > +\begin{lstlisting}
> > > > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > > > +\end{lstlisting}
> > > > > > > +
> > > > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > > > +the current payload is an entire datagram packet.
> > > > > > > +
> > > > > > > +Datagram fragmentation is subject to the following rules:
> > > > > > > +
> > > > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > > > +sequential order.
> > > > > > > +
> > > > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > > > +\field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > > > +
> > > > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > > > +
> > > > > > > +If fragments for a packet are only partially received after an
> > > > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > > > +MAY drop the fragments.
> > > > > > 
> > > > > > and how to detect this partial situation?
> > > > > > 
> > > > > > and if not then what happens?
> > > > > 
> > > > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > > > 
> > > > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > > > delivered to the destination socket.
> > > > > 
> > > > > If after X time no packet with EOM=1 is received, then we have detected
> > > > > this partial situation. The "then what happens part" is that the
> > > > > fragment list can be dropped and freed. Because the peer must send the
> > > > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > > > received.
> > > > 
> > > > aha. worth mentioning.
> > > > 
> > > > also all the must/may/should really belong in conformance
> > > > sections.
> > > > 
> > > 
> > > Got it, will do.
> > > 
> > > > 
> > > > > > 
> > > > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > > > +only.
> > > > > > 
> > > > > > what does this mean exactly?
> > > > > > 
> > > > > 
> > > > > It means that len only accounts for the fragment and not the whole
> > > > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > > > starts with the header.
> > > > > 
> > > > > For virtio-net mergable RX buffers the header is only in the first
> > > > > buffer and the length field accounts for the entire fragmented packet
> > > > > (that spans multiple bufers), so I suspected the specification was
> > > > > needed here too.
> > > > > 
> > > > > I'm happy to omit it.
> > > > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > > > >  
> > > > > > >  Certain events are communicated by the device to the driver using the event
> > > > > > > -- 
> > > > > > > 2.20.1
> > > > > > 
> > > > > > _______________________________________________
> > > > > > Virtualization mailing list
> > > > > > Virtualization@lists.linux-foundation.org
> > > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 09:24:26AM +0000, Bobby Eshleman wrote:
> On Sat, Sep 02, 2023 at 04:41:28AM -0400, Michael S. Tsirkin wrote:
> > On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> > > On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > > > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > > > 
> > > > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > > > message types and header fields are extended to support datagrams.
> > > > > > > Semantic differences between the flow types are stated, as well as any
> > > > > > > additional requirements for devices and drivers implementing this
> > > > > > > feature.
> > > > > > > 
> > > > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > > > ---
> > > > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > > > --- a/device-types/vsock/description.tex
> > > > > > > +++ b/device-types/vsock/description.tex
> > > > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > > >  \end{description}
> > > > > > >  
> > > > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > > > >  
> > > > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > > > +
> > > > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > > > >  
> > > > > > >  \begin{lstlisting}
> > > > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > > > -connection-oriented delivery with message and record boundaries.
> > > > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > > > +order or reliability guarantees.
> > > > > > >  
> > > > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > > >  communicating updates any time a change in buffer space occurs.
> > > > > > >  
> > > > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > > 
> > > > > > no limits on datagram size?
> > > > > > 
> > > > > 
> > > > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > > > 
> > > > or device driven maybe ...
> > > > 
> > > 
> > > Ah yes, I think Stefano was suggesting something like Laura's proposal:
> > > https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> > > 
> > > > > > also with no flow control at all there's a performance problem:
> > > > > > imagine queue gets full. now buffers begin to be dropped.
> > > > > > problem is, dropping is faster than delivering to application.
> > > > > > so now application sees its packets consumed super quickly
> > > > > > and starts sending even faster.
> > > > > > not good for performance.
> > > > > > 
> > > > > > yes datagram expects some way to drop packets but just disabling flow
> > > > > > control completely is not the right thing to do I think.
> > > > > > 
> > > > > 
> > > > > On the LKML I discussed using congestion notification as a way to handle
> > > > > this situation, but deferred it to a future feature bit. I can build
> > > > > it in from the beginning though.
> > > > 
> > > > as in messages to stop/start transmission? might work.
> > > > 
> > > 
> > > Yes, say for example that a flow is sending a large number of packets
> > > and the destination socket's receive queue becomes full. The destination
> > > sends a "stop" message with the destination address. More packets are
> > > likely to continue trailing in, and they may be dropped. The source
> > > device or driver will use the destination address to throttle further
> > > attempts of sockets to transmit to that destination, and the flow will
> > > stop.
> > > 
> > > After the socket's receive queue is no longer full, it may notify the
> > > device/driver which can then send a "start" message with the destination
> > > address to any previously "stopped" sources. The sources can then
> > > reenable flows to that destination.
> > 
> > Ah so control is actually per socket. Another idea is that does not have
> > to be completely full - we can start suppressing a bit before it's full
> > to reduce packet drops.
> > 
> 
> Totally, yes that makes sense.


I don't know how we prevent blocking traffic to unrelated
destinations in this case though.  Do we have to?

> > > 
> > > The other alternative I evaluated was using a single "stop for some
> > > time" message with an exponential or fibonacci backoff with a ceiling,
> > > but the downside is that a congested queue could block the "stop"
> > > message from reaching the source and eventually the source would become
> > > unthrottled even though the destination is *trying* to throttle it. I
> > > think this is bad for some pretty abusable cases, such as creating a
> > > socket that has no receiver. A stop/start message pair doesn't have this
> > > issue.
> > > > > > 
> > > > > > > +
> > > > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > >  
> > > > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +\field{flags} may have the following bit set:
> > > > > > > +
> > > > > > > +\begin{lstlisting}
> > > > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > > > +\end{lstlisting}
> > > > > > > +
> > > > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > > > +the current payload is an entire datagram packet.
> > > > > > > +
> > > > > > > +Datagram fragmentation is subject to the following rules:
> > > > > > > +
> > > > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > > > +sequential order.
> > > > > > > +
> > > > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > > > +\field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > > > +
> > > > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > > > +
> > > > > > > +If fragments for a packet are only partially received after an
> > > > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > > > +MAY drop the fragments.
> > > > > > 
> > > > > > and how to detect this partial situation?
> > > > > > 
> > > > > > and if not then what happens?
> > > > > 
> > > > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > > > 
> > > > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > > > delivered to the destination socket.
> > > > > 
> > > > > If after X time no packet with EOM=1 is received, then we have detected
> > > > > this partial situation. The "then what happens part" is that the
> > > > > fragment list can be dropped and freed. Because the peer must send the
> > > > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > > > received.
> > > > 
> > > > aha. worth mentioning.
> > > > 
> > > > also all the must/may/should really belong in conformance
> > > > sections.
> > > > 
> > > 
> > > Got it, will do.
> > > 
> > > > 
> > > > > > 
> > > > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > > > +only.
> > > > > > 
> > > > > > what does this mean exactly?
> > > > > > 
> > > > > 
> > > > > It means that len only accounts for the fragment and not the whole
> > > > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > > > starts with the header.
> > > > > 
> > > > > For virtio-net mergable RX buffers the header is only in the first
> > > > > buffer and the length field accounts for the entire fragmented packet
> > > > > (that spans multiple bufers), so I suspected the specification was
> > > > > needed here too.
> > > > > 
> > > > > I'm happy to omit it.
> > > > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > > > >  
> > > > > > >  Certain events are communicated by the device to the driver using the event
> > > > > > > -- 
> > > > > > > 2.20.1
> > > > > > 
> > > > > > _______________________________________________
> > > > > > Virtualization mailing list
> > > > > > Virtualization@lists.linux-foundation.org
> > > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 09:24:26AM +0000, Bobby Eshleman wrote:
> On Sat, Sep 02, 2023 at 04:41:28AM -0400, Michael S. Tsirkin wrote:
> > On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> > > On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > > > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > > > 
> > > > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > > > message types and header fields are extended to support datagrams.
> > > > > > > Semantic differences between the flow types are stated, as well as any
> > > > > > > additional requirements for devices and drivers implementing this
> > > > > > > feature.
> > > > > > > 
> > > > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > > > ---
> > > > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > > > 
> > > > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > > > --- a/device-types/vsock/description.tex
> > > > > > > +++ b/device-types/vsock/description.tex
> > > > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > > >  \end{description}
> > > > > > >  
> > > > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > > > >  
> > > > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > > > +
> > > > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > > > >  
> > > > > > >  \begin{lstlisting}
> > > > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > > > -connection-oriented delivery with message and record boundaries.
> > > > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > > > +order or reliability guarantees.
> > > > > > >  
> > > > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > > >  communicating updates any time a change in buffer space occurs.
> > > > > > >  
> > > > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > > 
> > > > > > no limits on datagram size?
> > > > > > 
> > > > > 
> > > > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > > > 
> > > > or device driven maybe ...
> > > > 
> > > 
> > > Ah yes, I think Stefano was suggesting something like Laura's proposal:
> > > https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> > > 
> > > > > > also with no flow control at all there's a performance problem:
> > > > > > imagine queue gets full. now buffers begin to be dropped.
> > > > > > problem is, dropping is faster than delivering to application.
> > > > > > so now application sees its packets consumed super quickly
> > > > > > and starts sending even faster.
> > > > > > not good for performance.
> > > > > > 
> > > > > > yes datagram expects some way to drop packets but just disabling flow
> > > > > > control completely is not the right thing to do I think.
> > > > > > 
> > > > > 
> > > > > On the LKML I discussed using congestion notification as a way to handle
> > > > > this situation, but deferred it to a future feature bit. I can build
> > > > > it in from the beginning though.
> > > > 
> > > > as in messages to stop/start transmission? might work.
> > > > 
> > > 
> > > Yes, say for example that a flow is sending a large number of packets
> > > and the destination socket's receive queue becomes full. The destination
> > > sends a "stop" message with the destination address. More packets are
> > > likely to continue trailing in, and they may be dropped. The source
> > > device or driver will use the destination address to throttle further
> > > attempts of sockets to transmit to that destination, and the flow will
> > > stop.
> > > 
> > > After the socket's receive queue is no longer full, it may notify the
> > > device/driver which can then send a "start" message with the destination
> > > address to any previously "stopped" sources. The sources can then
> > > reenable flows to that destination.
> > 
> > Ah so control is actually per socket. Another idea is that does not have
> > to be completely full - we can start suppressing a bit before it's full
> > to reduce packet drops.
> > 
> 
> Totally, yes that makes sense.


I don't know how we prevent blocking traffic to unrelated
destinations in this case though.  Do we have to?

> > > 
> > > The other alternative I evaluated was using a single "stop for some
> > > time" message with an exponential or fibonacci backoff with a ceiling,
> > > but the downside is that a congested queue could block the "stop"
> > > message from reaching the source and eventually the source would become
> > > unthrottled even though the destination is *trying* to throttle it. I
> > > think this is bad for some pretty abusable cases, such as creating a
> > > socket that has no receiver. A stop/start message pair doesn't have this
> > > issue.
> > > > > > 
> > > > > > > +
> > > > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > >  
> > > > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > -sufficient free buffer space for the payload.
> > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > >  
> > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > > >  \end{lstlisting}
> > > > > > >  
> > > > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > > > +fragmentation rules described in section
> > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > +
> > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > +
> > > > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > +exists for the destination address.
> > > > > > > +
> > > > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > > > +
> > > > > > > +\field{flags} may have the following bit set:
> > > > > > > +
> > > > > > > +\begin{lstlisting}
> > > > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > > > +\end{lstlisting}
> > > > > > > +
> > > > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > > > +the current payload is an entire datagram packet.
> > > > > > > +
> > > > > > > +Datagram fragmentation is subject to the following rules:
> > > > > > > +
> > > > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > > > +sequential order.
> > > > > > > +
> > > > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > > > +\field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > > > +
> > > > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > > > +
> > > > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > > > +
> > > > > > > +If fragments for a packet are only partially received after an
> > > > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > > > +MAY drop the fragments.
> > > > > > 
> > > > > > and how to detect this partial situation?
> > > > > > 
> > > > > > and if not then what happens?
> > > > > 
> > > > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > > > 
> > > > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > > > delivered to the destination socket.
> > > > > 
> > > > > If after X time no packet with EOM=1 is received, then we have detected
> > > > > this partial situation. The "then what happens part" is that the
> > > > > fragment list can be dropped and freed. Because the peer must send the
> > > > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > > > received.
> > > > 
> > > > aha. worth mentioning.
> > > > 
> > > > also all the must/may/should really belong in conformance
> > > > sections.
> > > > 
> > > 
> > > Got it, will do.
> > > 
> > > > 
> > > > > > 
> > > > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > > > +only.
> > > > > > 
> > > > > > what does this mean exactly?
> > > > > > 
> > > > > 
> > > > > It means that len only accounts for the fragment and not the whole
> > > > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > > > starts with the header.
> > > > > 
> > > > > For virtio-net mergable RX buffers the header is only in the first
> > > > > buffer and the length field accounts for the entire fragmented packet
> > > > > (that spans multiple bufers), so I suspected the specification was
> > > > > needed here too.
> > > > > 
> > > > > I'm happy to omit it.
> > > > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > > > >  
> > > > > > >  Certain events are communicated by the device to the driver using the event
> > > > > > > -- 
> > > > > > > 2.20.1
> > > > > > 
> > > > > > _______________________________________________
> > > > > > Virtualization mailing list
> > > > > > Virtualization@lists.linux-foundation.org
> > > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > > 
> > > > _______________________________________________
> > > > Virtualization mailing list
> > > > Virtualization@lists.linux-foundation.org
> > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > 
> > _______________________________________________
> > Virtualization mailing list
> > Virtualization@lists.linux-foundation.org
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

Re: [virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Wed, Sep 06, 2023 at 04:17:59AM -0400, Michael S. Tsirkin wrote:
> On Sat, Sep 02, 2023 at 09:24:26AM +0000, Bobby Eshleman wrote:
> > On Sat, Sep 02, 2023 at 04:41:28AM -0400, Michael S. Tsirkin wrote:
> > > On Sat, Sep 02, 2023 at 04:37:19AM +0000, Bobby Eshleman wrote:
> > > > On Fri, Sep 01, 2023 at 09:31:03AM -0400, Michael S. Tsirkin wrote:
> > > > > On Wed, Aug 30, 2023 at 12:43:03AM +0000, Bobby Eshleman wrote:
> > > > > > On Tue, Aug 29, 2023 at 06:21:35PM -0400, Michael S. Tsirkin wrote:
> > > > > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > > > > This adds support for datagrams to the virtio-vsock device.
> > > > > > > > 
> > > > > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > > > > message types and header fields are extended to support datagrams.
> > > > > > > > Semantic differences between the flow types are stated, as well as any
> > > > > > > > additional requirements for devices and drivers implementing this
> > > > > > > > feature.
> > > > > > > > 
> > > > > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > > > > ---
> > > > > > > >  device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > > > >  1 file changed, 88 insertions(+), 7 deletions(-)
> > > > > > > > 
> > > > > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > > > > --- a/device-types/vsock/description.tex
> > > > > > > > +++ b/device-types/vsock/description.tex
> > > > > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > > > >  \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > > > >  \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > > > >  \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > > > >  \end{description}
> > > > > > > >  
> > > > > > > >  \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > > > >  consists of a (cid, port number) tuple. The header fields used for this are
> > > > > > > >  \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > > > > >  
> > > > > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > > > > +
> > > > > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > > > > >  
> > > > > > > >  \begin{lstlisting}
> > > > > > > >  #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > > > >  #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > > > >  \end{lstlisting}
> > > > > > > >  
> > > > > > > >  Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > > > >  without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > > > > -connection-oriented delivery with message and record boundaries.
> > > > > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > > > > +order or reliability guarantees.
> > > > > > > >  
> > > > > > > >  \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > >  \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > > > >  previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > > > >  communicating updates any time a change in buffer space occurs.
> > > > > > > >  
> > > > > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > > > 
> > > > > > > no limits on datagram size?
> > > > > > > 
> > > > > > 
> > > > > > In the Linux proof-of-concept, it is 64KB. I can add that here too.
> > > > > 
> > > > > or device driven maybe ...
> > > > > 
> > > > 
> > > > Ah yes, I think Stefano was suggesting something like Laura's proposal:
> > > > https://lists.oasis-open.org/archives/virtio-comment/202206/msg00093.html
> > > > 
> > > > > > > also with no flow control at all there's a performance problem:
> > > > > > > imagine queue gets full. now buffers begin to be dropped.
> > > > > > > problem is, dropping is faster than delivering to application.
> > > > > > > so now application sees its packets consumed super quickly
> > > > > > > and starts sending even faster.
> > > > > > > not good for performance.
> > > > > > > 
> > > > > > > yes datagram expects some way to drop packets but just disabling flow
> > > > > > > control completely is not the right thing to do I think.
> > > > > > > 
> > > > > > 
> > > > > > On the LKML I discussed using congestion notification as a way to handle
> > > > > > this situation, but deferred it to a future feature bit. I can build
> > > > > > it in from the beginning though.
> > > > > 
> > > > > as in messages to stop/start transmission? might work.
> > > > > 
> > > > 
> > > > Yes, say for example that a flow is sending a large number of packets
> > > > and the destination socket's receive queue becomes full. The destination
> > > > sends a "stop" message with the destination address. More packets are
> > > > likely to continue trailing in, and they may be dropped. The source
> > > > device or driver will use the destination address to throttle further
> > > > attempts of sockets to transmit to that destination, and the flow will
> > > > stop.
> > > > 
> > > > After the socket's receive queue is no longer full, it may notify the
> > > > device/driver which can then send a "start" message with the destination
> > > > address to any previously "stopped" sources. The sources can then
> > > > reenable flows to that destination.
> > > 
> > > Ah so control is actually per socket. Another idea is that does not have
> > > to be completely full - we can start suppressing a bit before it's full
> > > to reduce packet drops.
> > > 
> > 
> > Totally, yes that makes sense.
> 
> 
> I don't know how we prevent blocking traffic to unrelated
> destinations in this case though.  Do we have to?
> 

I think if start/stop messages have both src_cid/src_port and
dst_cid/dst_port this can be avoided. The device/driver maintains a
mapping from (src_cid, src_port) to all (dst_cid, dst_port) destinations
that are stopped. Maybe a hashmap -> balanced tree. When "start" is
received then (dst_cid, dst_port) can be removed for that (src_cid,
src_port).

The socket layer can refer to this map for the block/no-block decision.

A socket may block for address (10, 100) because its bound address
cid/port maps to (10, 100) in the map, but won't block on some unrelated
address (for example: (20, 100)).

> > > > 
> > > > The other alternative I evaluated was using a single "stop for some
> > > > time" message with an exponential or fibonacci backoff with a ceiling,
> > > > but the downside is that a congested queue could block the "stop"
> > > > message from reaching the source and eventually the source would become
> > > > unthrottled even though the destination is *trying* to throttle it. I
> > > > think this is bad for some pretty abusable cases, such as creating a
> > > > socket that has no receiver. A stop/start message pair doesn't have this
> > > > issue.
> > > > > > > 
> > > > > > > > +
> > > > > > > >  \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > > -sufficient free buffer space for the payload.
> > > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > > >  
> > > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > > >  
> > > > > > > >  \devicenormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > > > > -sufficient free buffer space for the payload.
> > > > > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > > > > >  
> > > > > > > >  All packets associated with a stream flow MUST contain valid information in
> > > > > > > >  \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > > > >  #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > > > >  \end{lstlisting}
> > > > > > > >  
> > > > > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > > > > +
> > > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > > +
> > > > > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > > +
> > > > > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > > > > +fragmentation rules described in section
> > > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > > +
> > > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > > > > +
> > > > > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > > +
> > > > > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > > > > +fragmentation rules described in section
> > > > > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > > > > +
> > > > > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > > +
> > > > > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > > +exists for the destination address.
> > > > > > > > +
> > > > > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > > > > +
> > > > > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > > > > +exists for the destination address.
> > > > > > > > +
> > > > > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > > > > +
> > > > > > > > +\field{flags} may have the following bit set:
> > > > > > > > +
> > > > > > > > +\begin{lstlisting}
> > > > > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > > > > +\end{lstlisting}
> > > > > > > > +
> > > > > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > > > > +it indicates that the current payload is the end of a datagram fragment OR that
> > > > > > > > +the current payload is an entire datagram packet.
> > > > > > > > +
> > > > > > > > +Datagram fragmentation is subject to the following rules:
> > > > > > > > +
> > > > > > > > +The fragments for a datagram packet MUST be added to the virtqueue in
> > > > > > > > +sequential order.
> > > > > > > > +
> > > > > > > > +If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
> > > > > > > > +\field{flags} MUST be set.
> > > > > > > > +
> > > > > > > > +If a packet is the last fragment of a fragment sequence, then the
> > > > > > > > +VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
> > > > > > > > +
> > > > > > > > +If a packet is any fragment except the last fragment of a fragment sequence,
> > > > > > > > +then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
> > > > > > > > +
> > > > > > > > +If a driver or device has already placed a fragment of a packet on the
> > > > > > > > +virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
> > > > > > > > +before adding any additional packets or fragments to the virtqueue.
> > > > > > > > +
> > > > > > > > +If fragments for a packet are only partially received after an
> > > > > > > > +implementation-specific amount of time, then the destination device or driver
> > > > > > > > +MAY drop the fragments.
> > > > > > > 
> > > > > > > and how to detect this partial situation?
> > > > > > > 
> > > > > > > and if not then what happens?
> > > > > > 
> > > > > > All packets with EOM=0 should be added into a per-flow fragment list.
> > > > > > 
> > > > > > Once a packet with EOM=1 is received, they can all be concatenated and
> > > > > > delivered to the destination socket.
> > > > > > 
> > > > > > If after X time no packet with EOM=1 is received, then we have detected
> > > > > > this partial situation. The "then what happens part" is that the
> > > > > > fragment list can be dropped and freed. Because the peer must send the
> > > > > > remaining fragments, they will also be dropped and freed until EOM=1 is
> > > > > > received.
> > > > > 
> > > > > aha. worth mentioning.
> > > > > 
> > > > > also all the must/may/should really belong in conformance
> > > > > sections.
> > > > > 
> > > > 
> > > > Got it, will do.
> > > > 
> > > > > 
> > > > > > > 
> > > > > > > > +Each buffer containing a fragment MUST begin with a valid struct
> > > > > > > > +virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
> > > > > > > > +only.
> > > > > > > 
> > > > > > > what does this mean exactly?
> > > > > > > 
> > > > > > 
> > > > > > It means that len only accounts for the fragment and not the whole
> > > > > > (fragmented) packet. The second sentence means that the virtqueue buffer
> > > > > > starts with the header.
> > > > > > 
> > > > > > For virtio-net mergable RX buffers the header is only in the first
> > > > > > buffer and the length field accounts for the entire fragmented packet
> > > > > > (that spans multiple bufers), so I suspected the specification was
> > > > > > needed here too.
> > > > > > 
> > > > > > I'm happy to omit it.
> > > > > > > >  \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
> > > > > > > >  
> > > > > > > >  Certain events are communicated by the device to the driver using the event
> > > > > > > > -- 
> > > > > > > > 2.20.1
> > > > > > > 
> > > > > > > _______________________________________________
> > > > > > > Virtualization mailing list
> > > > > > > Virtualization@lists.linux-foundation.org
> > > > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > > > 
> > > > > _______________________________________________
> > > > > Virtualization mailing list
> > > > > Virtualization@lists.linux-foundation.org
> > > > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> > > 
> > > _______________________________________________
> > > Virtualization mailing list
> > > Virtualization@lists.linux-foundation.org
> > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
> For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>This adds support for datagrams to the virtio-vsock device.
>
>virtio-vsock already supports stream and seqpacket types. The existing
>message types and header fields are extended to support datagrams.
>Semantic differences between the flow types are stated, as well as any
>additional requirements for devices and drivers implementing this
>feature.
>
>Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>---
> device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> 1 file changed, 88 insertions(+), 7 deletions(-)
>
>diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>index 7d91d159872f..638dca8e5da1 100644
>--- a/device-types/vsock/description.tex
>+++ b/device-types/vsock/description.tex
>@@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>+\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> \end{description}
>
> \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>@@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> consists of a (cid, port number) tuple. The header fields used for this are
> \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>
>-Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>-for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>+
>+Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>+1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>+seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>
> \begin{lstlisting}
> #define VIRTIO_VSOCK_TYPE_STREAM    1
> #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>+#define VIRTIO_VSOCK_TYPE_DGRAM     3
> \end{lstlisting}
>
> Stream sockets provide in-order, guaranteed, connection-oriented delivery
> without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>-connection-oriented delivery with message and record boundaries.
>+connection-oriented delivery with message and record boundaries. Datagram
>+sockets provide connection-less, best-effort delivery of messages, with no
>+order or reliability guarantees.
>
> \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>@@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> communicating updates any time a change in buffer space occurs.
>
>+\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>+sockets. These fields are not used for datagram buffer space management.
>+
> \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>
> \devicenormative{\paragraph}{Device Operation: Buffer Space 
> Management}{Device Types / Socket Device / Device Operation / Buffer 
> Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>@@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> \end{lstlisting}
>
>+\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Drivers MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram 
>Sockets / Fragmentation}.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Devices MAY disassemble packets into smaller fragments. If devices fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Devices MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The driver MAY drop received packets with no notification to the device. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The device MAY drop received packets with no notification to the driver. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.

Should we provide some notification if the socket does not exist at the
destination?

>+
>+\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>+
>+\field{flags} may have the following bit set:
>+
>+\begin{lstlisting}
>+#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>+\end{lstlisting}
>+
>+When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>+it indicates that the current payload is the end of a datagram 
>fragment OR that
>+the current payload is an entire datagram packet.

In the destination, if we discard some fragments, then could we
reconstruct a different datagram from the one sent?

Is that anything acceptable?

Thanks,
Stefano

>+
>+Datagram fragmentation is subject to the following rules:
>+
>+The fragments for a datagram packet MUST be added to the virtqueue in
>+sequential order.
>+
>+If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
>+\field{flags} MUST be set.
>+
>+If a packet is the last fragment of a fragment sequence, then the
>+VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
>+
>+If a packet is any fragment except the last fragment of a fragment sequence,
>+then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
>+
>+If a driver or device has already placed a fragment of a packet on the
>+virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
>+before adding any additional packets or fragments to the virtqueue.
>+
>+If fragments for a packet are only partially received after an
>+implementation-specific amount of time, then the destination device or driver
>+MAY drop the fragments.
>+
>+Each buffer containing a fragment MUST begin with a valid struct
>+virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
>+only.
>+
> \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>
> Certain events are communicated by the device to the driver using the event
>-- 
>2.20.1
>


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>This adds support for datagrams to the virtio-vsock device.
>
>virtio-vsock already supports stream and seqpacket types. The existing
>message types and header fields are extended to support datagrams.
>Semantic differences between the flow types are stated, as well as any
>additional requirements for devices and drivers implementing this
>feature.
>
>Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>---
> device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> 1 file changed, 88 insertions(+), 7 deletions(-)
>
>diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>index 7d91d159872f..638dca8e5da1 100644
>--- a/device-types/vsock/description.tex
>+++ b/device-types/vsock/description.tex
>@@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>+\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> \end{description}
>
> \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>@@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> consists of a (cid, port number) tuple. The header fields used for this are
> \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>
>-Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>-for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>+
>+Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>+1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>+seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>
> \begin{lstlisting}
> #define VIRTIO_VSOCK_TYPE_STREAM    1
> #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>+#define VIRTIO_VSOCK_TYPE_DGRAM     3
> \end{lstlisting}
>
> Stream sockets provide in-order, guaranteed, connection-oriented delivery
> without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>-connection-oriented delivery with message and record boundaries.
>+connection-oriented delivery with message and record boundaries. Datagram
>+sockets provide connection-less, best-effort delivery of messages, with no
>+order or reliability guarantees.
>
> \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>@@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> communicating updates any time a change in buffer space occurs.
>
>+\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>+sockets. These fields are not used for datagram buffer space management.
>+
> \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>
> \devicenormative{\paragraph}{Device Operation: Buffer Space 
> Management}{Device Types / Socket Device / Device Operation / Buffer 
> Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>@@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> \end{lstlisting}
>
>+\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Drivers MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram 
>Sockets / Fragmentation}.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Devices MAY disassemble packets into smaller fragments. If devices fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Devices MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The driver MAY drop received packets with no notification to the device. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The device MAY drop received packets with no notification to the driver. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.

Should we provide some notification if the socket does not exist at the
destination?

>+
>+\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>+
>+\field{flags} may have the following bit set:
>+
>+\begin{lstlisting}
>+#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>+\end{lstlisting}
>+
>+When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>+it indicates that the current payload is the end of a datagram 
>fragment OR that
>+the current payload is an entire datagram packet.

In the destination, if we discard some fragments, then could we
reconstruct a different datagram from the one sent?

Is that anything acceptable?

Thanks,
Stefano

>+
>+Datagram fragmentation is subject to the following rules:
>+
>+The fragments for a datagram packet MUST be added to the virtqueue in
>+sequential order.
>+
>+If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
>+\field{flags} MUST be set.
>+
>+If a packet is the last fragment of a fragment sequence, then the
>+VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
>+
>+If a packet is any fragment except the last fragment of a fragment sequence,
>+then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
>+
>+If a driver or device has already placed a fragment of a packet on the
>+virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
>+before adding any additional packets or fragments to the virtqueue.
>+
>+If fragments for a packet are only partially received after an
>+implementation-specific amount of time, then the destination device or driver
>+MAY drop the fragments.
>+
>+Each buffer containing a fragment MUST begin with a valid struct
>+virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
>+only.
>+
> \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>
> Certain events are communicated by the device to the driver using the event
>-- 
>2.20.1
>

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>This adds support for datagrams to the virtio-vsock device.
>
>virtio-vsock already supports stream and seqpacket types. The existing
>message types and header fields are extended to support datagrams.
>Semantic differences between the flow types are stated, as well as any
>additional requirements for devices and drivers implementing this
>feature.
>
>Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>---
> device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> 1 file changed, 88 insertions(+), 7 deletions(-)
>
>diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>index 7d91d159872f..638dca8e5da1 100644
>--- a/device-types/vsock/description.tex
>+++ b/device-types/vsock/description.tex
>@@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>+\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> \end{description}
>
> \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>@@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> consists of a (cid, port number) tuple. The header fields used for this are
> \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>
>-Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>-for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>+
>+Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>+1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>+seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>
> \begin{lstlisting}
> #define VIRTIO_VSOCK_TYPE_STREAM    1
> #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>+#define VIRTIO_VSOCK_TYPE_DGRAM     3
> \end{lstlisting}
>
> Stream sockets provide in-order, guaranteed, connection-oriented delivery
> without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>-connection-oriented delivery with message and record boundaries.
>+connection-oriented delivery with message and record boundaries. Datagram
>+sockets provide connection-less, best-effort delivery of messages, with no
>+order or reliability guarantees.
>
> \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>@@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> communicating updates any time a change in buffer space occurs.
>
>+\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>+sockets. These fields are not used for datagram buffer space management.
>+
> \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>
> \devicenormative{\paragraph}{Device Operation: Buffer Space 
> Management}{Device Types / Socket Device / Device Operation / Buffer 
> Space Management}
>-VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>-sufficient free buffer space for the payload.
>+For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>+transmitted when the peer has sufficient free buffer space for the payload.
>
> All packets associated with a stream flow MUST contain valid information in
> \field{buf_alloc} and \field{fwd_cnt} fields.
>@@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> \end{lstlisting}
>
>+\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Drivers MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram 
>Sockets / Fragmentation}.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>+
>+Devices MAY disassemble packets into smaller fragments. If devices fragment a
>+packet, they MUST follow the fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+Devices MUST support assembly of received packet fragments according to the
>+fragmentation rules described in section
>+\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>+
>+\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The driver MAY drop received packets with no notification to the device. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.
>+
>+\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>+
>+The device MAY drop received packets with no notification to the driver. This
>+can happen if, for example, there are insufficient resources or no socket
>+exists for the destination address.

Should we provide some notification if the socket does not exist at the
destination?

>+
>+\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>+
>+\field{flags} may have the following bit set:
>+
>+\begin{lstlisting}
>+#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>+\end{lstlisting}
>+
>+When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>+it indicates that the current payload is the end of a datagram 
>fragment OR that
>+the current payload is an entire datagram packet.

In the destination, if we discard some fragments, then could we
reconstruct a different datagram from the one sent?

Is that anything acceptable?

Thanks,
Stefano

>+
>+Datagram fragmentation is subject to the following rules:
>+
>+The fragments for a datagram packet MUST be added to the virtqueue in
>+sequential order.
>+
>+If a packet is not a fragment, then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of
>+\field{flags} MUST be set.
>+
>+If a packet is the last fragment of a fragment sequence, then the
>+VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST be set.
>+
>+If a packet is any fragment except the last fragment of a fragment sequence,
>+then the VIRTIO_VSOCK_DGRAM_EOM bit (bit 0) of \field{flags} MUST NOT be set.
>+
>+If a driver or device has already placed a fragment of a packet on the
>+virtqueue, it MUST add the remaining fragments of the packet to the virtqueue
>+before adding any additional packets or fragments to the virtqueue.
>+
>+If fragments for a packet are only partially received after an
>+implementation-specific amount of time, then the destination device or driver
>+MAY drop the fragments.
>+
>+Each buffer containing a fragment MUST begin with a valid struct
>+virtio_vsock_hdr. \field{len} MUST equal the length of the fragment payload
>+only.
>+
> \subsubsection{Device Events}\label{sec:Device Types / Socket Device / Device Operation / Device Events}
>
> Certain events are communicated by the device to the driver using the event
>-- 
>2.20.1
>


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > This adds support for datagrams to the virtio-vsock device.
> > 
> > virtio-vsock already supports stream and seqpacket types. The existing
> > message types and header fields are extended to support datagrams.
> > Semantic differences between the flow types are stated, as well as any
> > additional requirements for devices and drivers implementing this
> > feature.
> > 
> > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > ---
> > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > 1 file changed, 88 insertions(+), 7 deletions(-)
> > 
> > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > index 7d91d159872f..638dca8e5da1 100644
> > --- a/device-types/vsock/description.tex
> > +++ b/device-types/vsock/description.tex
> > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > \end{description}
> > 
> > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > consists of a (cid, port number) tuple. The header fields used for this are
> > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > 
> > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > +
> > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > 
> > \begin{lstlisting}
> > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > \end{lstlisting}
> > 
> > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > -connection-oriented delivery with message and record boundaries.
> > +connection-oriented delivery with message and record boundaries. Datagram
> > +sockets provide connection-less, best-effort delivery of messages, with no
> > +order or reliability guarantees.
> > 
> > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > communicating updates any time a change in buffer space occurs.
> > 
> > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > +sockets. These fields are not used for datagram buffer space management.
> > +
> > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > -sufficient free buffer space for the payload.
> > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > +transmitted when the peer has sufficient free buffer space for the payload.
> > 
> > All packets associated with a stream flow MUST contain valid information in
> > \field{buf_alloc} and \field{fwd_cnt} fields.
> > 
> > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > Management}{Device Types / Socket Device / Device Operation / Buffer
> > Space Management}
> > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > -sufficient free buffer space for the payload.
> > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > +transmitted when the peer has sufficient free buffer space for the payload.
> > 
> > All packets associated with a stream flow MUST contain valid information in
> > \field{buf_alloc} and \field{fwd_cnt} fields.
> > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > \end{lstlisting}
> > 
> > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > +
> > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > +
> > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > +packet, they MUST follow the fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +Drivers MUST support assembly of received packet fragments according to the
> > +fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > Sockets / Fragmentation}.
> > +
> > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > +
> > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > +packet, they MUST follow the fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +Devices MUST support assembly of received packet fragments according to the
> > +fragmentation rules described in section
> > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > +
> > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > +
> > +The driver MAY drop received packets with no notification to the device. This
> > +can happen if, for example, there are insufficient resources or no socket
> > +exists for the destination address.
> > +
> > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > +
> > +The device MAY drop received packets with no notification to the driver. This
> > +can happen if, for example, there are insufficient resources or no socket
> > +exists for the destination address.
> 
> Should we provide some notification if the socket does not exist at the
> destination?
> 

Yes, I think so. I believe a start/stop congestion notification scheme
actually manages this issue well.

For example, the source begins sending packets to a destination.

The destination finds that there exists no socket for that destination
address. The destination sends a "stop" notification to the source that
contains the address in question. Meanwhile, packets are still coming in
but they are being dropped.

The source receives the "stop" notification with the address and adds it
to the "stopped destinations" list. Any new packet destination address
will be compared to that list. Any matches will be dropped before
sending (and ideally, before wasting time allocating the packet).

Only when a socket is bound to an address that matches a "stopped"
address does the destination send a "start" notification to any source
it has previusly sent a "stop" notification to.

Once "start" is received, flow may resume as normal.

> > +
> > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > +
> > +\field{flags} may have the following bit set:
> > +
> > +\begin{lstlisting}
> > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > +\end{lstlisting}
> > +
> > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > +it indicates that the current payload is the end of a datagram fragment
> > OR that
> > +the current payload is an entire datagram packet.
> 
> In the destination, if we discard some fragments, then could we
> reconstruct a different datagram from the one sent?
> 
> Is that anything acceptable?
> 

Dropping fragments should be explicitly disallowed. The sender is
explicitly disallowed from NOT placing fragments on the virtqueue, but I
see that I am missing the piece that states that they may not be dropped
on the receive side.

I think it is worth mentioning that implicit in this spec is that
socket-to-socket dgram communication is unreliable, but device-to-driver
(and vice versa) is still reliable. That is, we can rely at least on the
virtqueues to work... and if they fail then the device/driver can simply
requeue (think send_pkt_queue in Linux)... so there is some reliability
at the lowest layer.

> Thanks,
> Stefano
> 

Thanks!
Bobby

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > 1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > \end{description}
> > > 
> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > consists of a (cid, port number) tuple. The header fields used for this are
> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > 
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > 
> > > \begin{lstlisting}
> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > \end{lstlisting}
> > > 
> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > > 
> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > communicating updates any time a change in buffer space occurs.
> > > 
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > > +
> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > 
> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > > Management}{Device Types / Socket Device / Device Operation / Buffer
> > > Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > \end{lstlisting}
> > > 
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > > Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > 
> > Should we provide some notification if the socket does not exist at the
> > destination?
> > 
> 
> Yes, I think so. I believe a start/stop congestion notification scheme
> actually manages this issue well.
> 
> For example, the source begins sending packets to a destination.
> 
> The destination finds that there exists no socket for that destination
> address. The destination sends a "stop" notification to the source that
> contains the address in question. Meanwhile, packets are still coming in
> but they are being dropped.
> 
> The source receives the "stop" notification with the address and adds it
> to the "stopped destinations" list. Any new packet destination address
> will be compared to that list. Any matches will be dropped before
> sending (and ideally, before wasting time allocating the packet).
> 
> Only when a socket is bound to an address that matches a "stopped"
> address does the destination send a "start" notification to any source
> it has previusly sent a "stop" notification to.
> 
> Once "start" is received, flow may resume as normal.

Again, dropping as control flow tactic has a bunch of problems.
Blocking senders sounds more reasonable.


> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment
> > > OR that
> > > +the current payload is an entire datagram packet.
> > 
> > In the destination, if we discard some fragments, then could we
> > reconstruct a different datagram from the one sent?
> > 
> > Is that anything acceptable?
> > 
> 
> Dropping fragments should be explicitly disallowed. The sender is
> explicitly disallowed from NOT placing fragments on the virtqueue, but I
> see that I am missing the piece that states that they may not be dropped
> on the receive side.
> 
> I think it is worth mentioning that implicit in this spec is that
> socket-to-socket dgram communication is unreliable, but device-to-driver
> (and vice versa) is still reliable. That is, we can rely at least on the
> virtqueues to work... and if they fail then the device/driver can simply
> requeue (think send_pkt_queue in Linux)... so there is some reliability
> at the lowest layer.

Well you have this weird timeout thing for some reason.

> > Thanks,
> > Stefano
> > 
> 
> Thanks!
> Bobby


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > 1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > \end{description}
> > > 
> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > consists of a (cid, port number) tuple. The header fields used for this are
> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > 
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > 
> > > \begin{lstlisting}
> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > \end{lstlisting}
> > > 
> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > > 
> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > communicating updates any time a change in buffer space occurs.
> > > 
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > > +
> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > 
> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > > Management}{Device Types / Socket Device / Device Operation / Buffer
> > > Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > \end{lstlisting}
> > > 
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > > Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > 
> > Should we provide some notification if the socket does not exist at the
> > destination?
> > 
> 
> Yes, I think so. I believe a start/stop congestion notification scheme
> actually manages this issue well.
> 
> For example, the source begins sending packets to a destination.
> 
> The destination finds that there exists no socket for that destination
> address. The destination sends a "stop" notification to the source that
> contains the address in question. Meanwhile, packets are still coming in
> but they are being dropped.
> 
> The source receives the "stop" notification with the address and adds it
> to the "stopped destinations" list. Any new packet destination address
> will be compared to that list. Any matches will be dropped before
> sending (and ideally, before wasting time allocating the packet).
> 
> Only when a socket is bound to an address that matches a "stopped"
> address does the destination send a "start" notification to any source
> it has previusly sent a "stop" notification to.
> 
> Once "start" is received, flow may resume as normal.

Again, dropping as control flow tactic has a bunch of problems.
Blocking senders sounds more reasonable.


> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment
> > > OR that
> > > +the current payload is an entire datagram packet.
> > 
> > In the destination, if we discard some fragments, then could we
> > reconstruct a different datagram from the one sent?
> > 
> > Is that anything acceptable?
> > 
> 
> Dropping fragments should be explicitly disallowed. The sender is
> explicitly disallowed from NOT placing fragments on the virtqueue, but I
> see that I am missing the piece that states that they may not be dropped
> on the receive side.
> 
> I think it is worth mentioning that implicit in this spec is that
> socket-to-socket dgram communication is unreliable, but device-to-driver
> (and vice versa) is still reliable. That is, we can rely at least on the
> virtqueues to work... and if they fail then the device/driver can simply
> requeue (think send_pkt_queue in Linux)... so there is some reliability
> at the lowest layer.

Well you have this weird timeout thing for some reason.

> > Thanks,
> > Stefano
> > 
> 
> Thanks!
> Bobby

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Michael S. Tsirkin]

On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > This adds support for datagrams to the virtio-vsock device.
> > > 
> > > virtio-vsock already supports stream and seqpacket types. The existing
> > > message types and header fields are extended to support datagrams.
> > > Semantic differences between the flow types are stated, as well as any
> > > additional requirements for devices and drivers implementing this
> > > feature.
> > > 
> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > ---
> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > 1 file changed, 88 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > index 7d91d159872f..638dca8e5da1 100644
> > > --- a/device-types/vsock/description.tex
> > > +++ b/device-types/vsock/description.tex
> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > \end{description}
> > > 
> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > consists of a (cid, port number) tuple. The header fields used for this are
> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > 
> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > +
> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > 
> > > \begin{lstlisting}
> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > \end{lstlisting}
> > > 
> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > -connection-oriented delivery with message and record boundaries.
> > > +connection-oriented delivery with message and record boundaries. Datagram
> > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > +order or reliability guarantees.
> > > 
> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > communicating updates any time a change in buffer space occurs.
> > > 
> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > +sockets. These fields are not used for datagram buffer space management.
> > > +
> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > 
> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > > Management}{Device Types / Socket Device / Device Operation / Buffer
> > > Space Management}
> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > -sufficient free buffer space for the payload.
> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > 
> > > All packets associated with a stream flow MUST contain valid information in
> > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > \end{lstlisting}
> > > 
> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Drivers MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > > Sockets / Fragmentation}.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > +
> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > +packet, they MUST follow the fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +Devices MUST support assembly of received packet fragments according to the
> > > +fragmentation rules described in section
> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > +
> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The driver MAY drop received packets with no notification to the device. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > > +
> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > +
> > > +The device MAY drop received packets with no notification to the driver. This
> > > +can happen if, for example, there are insufficient resources or no socket
> > > +exists for the destination address.
> > 
> > Should we provide some notification if the socket does not exist at the
> > destination?
> > 
> 
> Yes, I think so. I believe a start/stop congestion notification scheme
> actually manages this issue well.
> 
> For example, the source begins sending packets to a destination.
> 
> The destination finds that there exists no socket for that destination
> address. The destination sends a "stop" notification to the source that
> contains the address in question. Meanwhile, packets are still coming in
> but they are being dropped.
> 
> The source receives the "stop" notification with the address and adds it
> to the "stopped destinations" list. Any new packet destination address
> will be compared to that list. Any matches will be dropped before
> sending (and ideally, before wasting time allocating the packet).
> 
> Only when a socket is bound to an address that matches a "stopped"
> address does the destination send a "start" notification to any source
> it has previusly sent a "stop" notification to.
> 
> Once "start" is received, flow may resume as normal.

Again, dropping as control flow tactic has a bunch of problems.
Blocking senders sounds more reasonable.


> > > +
> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > +
> > > +\field{flags} may have the following bit set:
> > > +
> > > +\begin{lstlisting}
> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > +\end{lstlisting}
> > > +
> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > +it indicates that the current payload is the end of a datagram fragment
> > > OR that
> > > +the current payload is an entire datagram packet.
> > 
> > In the destination, if we discard some fragments, then could we
> > reconstruct a different datagram from the one sent?
> > 
> > Is that anything acceptable?
> > 
> 
> Dropping fragments should be explicitly disallowed. The sender is
> explicitly disallowed from NOT placing fragments on the virtqueue, but I
> see that I am missing the piece that states that they may not be dropped
> on the receive side.
> 
> I think it is worth mentioning that implicit in this spec is that
> socket-to-socket dgram communication is unreliable, but device-to-driver
> (and vice versa) is still reliable. That is, we can rely at least on the
> virtqueues to work... and if they fail then the device/driver can simply
> requeue (think send_pkt_queue in Linux)... so there is some reliability
> at the lowest layer.

Well you have this weird timeout thing for some reason.

> > Thanks,
> > Stefano
> > 
> 
> Thanks!
> Bobby


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Sat, Sep 02, 2023 at 04:35:25AM -0400, Michael S. Tsirkin wrote:
> On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
> > On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > This adds support for datagrams to the virtio-vsock device.
> > > > 
> > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > message types and header fields are extended to support datagrams.
> > > > Semantic differences between the flow types are stated, as well as any
> > > > additional requirements for devices and drivers implementing this
> > > > feature.
> > > > 
> > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > ---
> > > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > 1 file changed, 88 insertions(+), 7 deletions(-)
> > > > 
> > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > index 7d91d159872f..638dca8e5da1 100644
> > > > --- a/device-types/vsock/description.tex
> > > > +++ b/device-types/vsock/description.tex
> > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > \end{description}
> > > > 
> > > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > consists of a (cid, port number) tuple. The header fields used for this are
> > > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > 
> > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > +
> > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > 
> > > > \begin{lstlisting}
> > > > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > \end{lstlisting}
> > > > 
> > > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > -connection-oriented delivery with message and record boundaries.
> > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > +order or reliability guarantees.
> > > > 
> > > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > communicating updates any time a change in buffer space occurs.
> > > > 
> > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > +sockets. These fields are not used for datagram buffer space management.
> > > > +
> > > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > -sufficient free buffer space for the payload.
> > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > 
> > > > All packets associated with a stream flow MUST contain valid information in
> > > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > 
> > > > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > > > Management}{Device Types / Socket Device / Device Operation / Buffer
> > > > Space Management}
> > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > -sufficient free buffer space for the payload.
> > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > 
> > > > All packets associated with a stream flow MUST contain valid information in
> > > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > \end{lstlisting}
> > > > 
> > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > +
> > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > +
> > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > +packet, they MUST follow the fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > +fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > > > Sockets / Fragmentation}.
> > > > +
> > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > +
> > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > +packet, they MUST follow the fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +Devices MUST support assembly of received packet fragments according to the
> > > > +fragmentation rules described in section
> > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > +
> > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > +
> > > > +The driver MAY drop received packets with no notification to the device. This
> > > > +can happen if, for example, there are insufficient resources or no socket
> > > > +exists for the destination address.
> > > > +
> > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > +
> > > > +The device MAY drop received packets with no notification to the driver. This
> > > > +can happen if, for example, there are insufficient resources or no socket
> > > > +exists for the destination address.
> > > 
> > > Should we provide some notification if the socket does not exist at the
> > > destination?
> > > 
> > 
> > Yes, I think so. I believe a start/stop congestion notification scheme
> > actually manages this issue well.
> > 
> > For example, the source begins sending packets to a destination.
> > 
> > The destination finds that there exists no socket for that destination
> > address. The destination sends a "stop" notification to the source that
> > contains the address in question. Meanwhile, packets are still coming in
> > but they are being dropped.
> > 
> > The source receives the "stop" notification with the address and adds it
> > to the "stopped destinations" list. Any new packet destination address
> > will be compared to that list. Any matches will be dropped before
> > sending (and ideally, before wasting time allocating the packet).
> > 
> > Only when a socket is bound to an address that matches a "stopped"
> > address does the destination send a "start" notification to any source
> > it has previusly sent a "stop" notification to.
> > 
> > Once "start" is received, flow may resume as normal.
> 
> Again, dropping as control flow tactic has a bunch of problems.
> Blocking senders sounds more reasonable.
> 

Sure, I think we are on the same page. When I refer to "before wasting
time allocating the packet", I mean blocking the sender after sendto()
but before allocating the packet and enqueuing it. For the non-blocking
case, the request has to be dropped and -EAGAIN returned. For the
blocking case, just waiting.

> 
> > > > +
> > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > +
> > > > +\field{flags} may have the following bit set:
> > > > +
> > > > +\begin{lstlisting}
> > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > +\end{lstlisting}
> > > > +
> > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > +it indicates that the current payload is the end of a datagram fragment
> > > > OR that
> > > > +the current payload is an entire datagram packet.
> > > 
> > > In the destination, if we discard some fragments, then could we
> > > reconstruct a different datagram from the one sent?
> > > 
> > > Is that anything acceptable?
> > > 
> > 
> > Dropping fragments should be explicitly disallowed. The sender is
> > explicitly disallowed from NOT placing fragments on the virtqueue, but I
> > see that I am missing the piece that states that they may not be dropped
> > on the receive side.
> > 
> > I think it is worth mentioning that implicit in this spec is that
> > socket-to-socket dgram communication is unreliable, but device-to-driver
> > (and vice versa) is still reliable. That is, we can rely at least on the
> > virtqueues to work... and if they fail then the device/driver can simply
> > requeue (think send_pkt_queue in Linux)... so there is some reliability
> > at the lowest layer.
> 
> Well you have this weird timeout thing for some reason.
> 

The "weird" timeout thing exists to deal with system failure, not
protocol reliability... so that the host is not left with a bunch of
fragments waiting for a completion that never comes from a guest that
has crashed/hung for reasons outside of the vsock protocol's control.
I'll drop it in the next version and we can just let the fragments hang
around until the guest is shutdown... given its limited size it is an
okay trade-off for simplicity.

Thanks,
Bobby


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-comment] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Sat, Sep 02, 2023 at 04:35:25AM -0400, Michael S. Tsirkin wrote:
>On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
>> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
>> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>> > > This adds support for datagrams to the virtio-vsock device.
>> > >
>> > > virtio-vsock already supports stream and seqpacket types. The existing
>> > > message types and header fields are extended to support datagrams.
>> > > Semantic differences between the flow types are stated, as well as any
>> > > additional requirements for devices and drivers implementing this
>> > > feature.
>> > >
>> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>> > > ---
>> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>> > > 1 file changed, 88 insertions(+), 7 deletions(-)
>> > >
>> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>> > > index 7d91d159872f..638dca8e5da1 100644
>> > > --- a/device-types/vsock/description.tex
>> > > +++ b/device-types/vsock/description.tex
>> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>> > > \end{description}
>> > >
>> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>> > > consists of a (cid, port number) tuple. The header fields used for this are
>> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>> > >
>> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>> > > +
>> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>> > >
>> > > \begin{lstlisting}
>> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
>> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>> > > \end{lstlisting}
>> > >
>> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
>> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>> > > -connection-oriented delivery with message and record boundaries.
>> > > +connection-oriented delivery with message and record boundaries. Datagram
>> > > +sockets provide connection-less, best-effort delivery of messages, with no
>> > > +order or reliability guarantees.
>> > >
>> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>> > > communicating updates any time a change in buffer space occurs.
>> > >
>> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>> > > +sockets. These fields are not used for datagram buffer space management.
>> > > +
>> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > >
>> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
>> > > Management}{Device Types / Socket Device / Device Operation / Buffer
>> > > Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>> > > \end{lstlisting}
>> > >
>> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Drivers MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
>> > > Sockets / Fragmentation}.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Devices MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The driver MAY drop received packets with no notification to the device. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The device MAY drop received packets with no notification to the driver. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> >
>> > Should we provide some notification if the socket does not exist at the
>> > destination?
>> >
>>
>> Yes, I think so. I believe a start/stop congestion notification scheme
>> actually manages this issue well.
>>
>> For example, the source begins sending packets to a destination.
>>
>> The destination finds that there exists no socket for that destination
>> address. The destination sends a "stop" notification to the source that
>> contains the address in question. Meanwhile, packets are still coming in
>> but they are being dropped.
>>
>> The source receives the "stop" notification with the address and adds it
>> to the "stopped destinations" list. Any new packet destination address
>> will be compared to that list. Any matches will be dropped before
>> sending (and ideally, before wasting time allocating the packet).
>>
>> Only when a socket is bound to an address that matches a "stopped"
>> address does the destination send a "start" notification to any source
>> it has previusly sent a "stop" notification to.

mmm, keeping the state forever could facilitate a DoS, perhaps we
should provide a timeout after which to try again

>>
>> Once "start" is received, flow may resume as normal.
>
>Again, dropping as control flow tactic has a bunch of problems.
>Blocking senders sounds more reasonable.

Yep, I think so.

>
>
>> > > +
>> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>> > > +
>> > > +\field{flags} may have the following bit set:
>> > > +
>> > > +\begin{lstlisting}
>> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>> > > +\end{lstlisting}
>> > > +
>> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>> > > +it indicates that the current payload is the end of a datagram fragment
>> > > OR that
>> > > +the current payload is an entire datagram packet.
>> >
>> > In the destination, if we discard some fragments, then could we
>> > reconstruct a different datagram from the one sent?
>> >
>> > Is that anything acceptable?
>> >
>>
>> Dropping fragments should be explicitly disallowed. The sender is
>> explicitly disallowed from NOT placing fragments on the virtqueue, but I
>> see that I am missing the piece that states that they may not be dropped
>> on the receive side.
>>
>> I think it is worth mentioning that implicit in this spec is that
>> socket-to-socket dgram communication is unreliable, but device-to-driver
>> (and vice versa) is still reliable. That is, we can rely at least on the
>> virtqueues to work... and if they fail then the device/driver can simply
>> requeue (think send_pkt_queue in Linux)... so there is some reliability
>> at the lowest layer.

Yep, we should clarify this better.

Thanks,
Stefano


This publicly archived list offers a means to provide input to the
OASIS Virtual I/O Device (VIRTIO) TC.

In order to verify user consent to the Feedback License terms and
to minimize spam in the list archive, subscription is required
before posting.

Subscribe: virtio-comment-subscribe@lists.oasis-open.org
Unsubscribe: virtio-comment-unsubscribe@lists.oasis-open.org
List help: virtio-comment-help@lists.oasis-open.org
List archive: https://lists.oasis-open.org/archives/virtio-comment/
Feedback License: https://www.oasis-open.org/who/ipr/feedback_license.pdf
List Guidelines: https://www.oasis-open.org/policies-guidelines/mailing-lists
Committee: https://www.oasis-open.org/committees/virtio/
Join OASIS: https://www.oasis-open.org/join/

Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Sat, Sep 02, 2023 at 04:35:25AM -0400, Michael S. Tsirkin wrote:
>On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
>> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
>> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>> > > This adds support for datagrams to the virtio-vsock device.
>> > >
>> > > virtio-vsock already supports stream and seqpacket types. The existing
>> > > message types and header fields are extended to support datagrams.
>> > > Semantic differences between the flow types are stated, as well as any
>> > > additional requirements for devices and drivers implementing this
>> > > feature.
>> > >
>> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>> > > ---
>> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>> > > 1 file changed, 88 insertions(+), 7 deletions(-)
>> > >
>> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>> > > index 7d91d159872f..638dca8e5da1 100644
>> > > --- a/device-types/vsock/description.tex
>> > > +++ b/device-types/vsock/description.tex
>> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>> > > \end{description}
>> > >
>> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>> > > consists of a (cid, port number) tuple. The header fields used for this are
>> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>> > >
>> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>> > > +
>> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>> > >
>> > > \begin{lstlisting}
>> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
>> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>> > > \end{lstlisting}
>> > >
>> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
>> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>> > > -connection-oriented delivery with message and record boundaries.
>> > > +connection-oriented delivery with message and record boundaries. Datagram
>> > > +sockets provide connection-less, best-effort delivery of messages, with no
>> > > +order or reliability guarantees.
>> > >
>> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>> > > communicating updates any time a change in buffer space occurs.
>> > >
>> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>> > > +sockets. These fields are not used for datagram buffer space management.
>> > > +
>> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > >
>> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
>> > > Management}{Device Types / Socket Device / Device Operation / Buffer
>> > > Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>> > > \end{lstlisting}
>> > >
>> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Drivers MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
>> > > Sockets / Fragmentation}.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Devices MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The driver MAY drop received packets with no notification to the device. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The device MAY drop received packets with no notification to the driver. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> >
>> > Should we provide some notification if the socket does not exist at the
>> > destination?
>> >
>>
>> Yes, I think so. I believe a start/stop congestion notification scheme
>> actually manages this issue well.
>>
>> For example, the source begins sending packets to a destination.
>>
>> The destination finds that there exists no socket for that destination
>> address. The destination sends a "stop" notification to the source that
>> contains the address in question. Meanwhile, packets are still coming in
>> but they are being dropped.
>>
>> The source receives the "stop" notification with the address and adds it
>> to the "stopped destinations" list. Any new packet destination address
>> will be compared to that list. Any matches will be dropped before
>> sending (and ideally, before wasting time allocating the packet).
>>
>> Only when a socket is bound to an address that matches a "stopped"
>> address does the destination send a "start" notification to any source
>> it has previusly sent a "stop" notification to.

mmm, keeping the state forever could facilitate a DoS, perhaps we
should provide a timeout after which to try again

>>
>> Once "start" is received, flow may resume as normal.
>
>Again, dropping as control flow tactic has a bunch of problems.
>Blocking senders sounds more reasonable.

Yep, I think so.

>
>
>> > > +
>> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>> > > +
>> > > +\field{flags} may have the following bit set:
>> > > +
>> > > +\begin{lstlisting}
>> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>> > > +\end{lstlisting}
>> > > +
>> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>> > > +it indicates that the current payload is the end of a datagram fragment
>> > > OR that
>> > > +the current payload is an entire datagram packet.
>> >
>> > In the destination, if we discard some fragments, then could we
>> > reconstruct a different datagram from the one sent?
>> >
>> > Is that anything acceptable?
>> >
>>
>> Dropping fragments should be explicitly disallowed. The sender is
>> explicitly disallowed from NOT placing fragments on the virtqueue, but I
>> see that I am missing the piece that states that they may not be dropped
>> on the receive side.
>>
>> I think it is worth mentioning that implicit in this spec is that
>> socket-to-socket dgram communication is unreliable, but device-to-driver
>> (and vice versa) is still reliable. That is, we can rely at least on the
>> virtqueues to work... and if they fail then the device/driver can simply
>> requeue (think send_pkt_queue in Linux)... so there is some reliability
>> at the lowest layer.

Yep, we should clarify this better.

Thanks,
Stefano

_______________________________________________
Virtualization mailing list
Virtualization@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/virtualization

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Stefano Garzarella]

On Sat, Sep 02, 2023 at 04:35:25AM -0400, Michael S. Tsirkin wrote:
>On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
>> On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
>> > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
>> > > This adds support for datagrams to the virtio-vsock device.
>> > >
>> > > virtio-vsock already supports stream and seqpacket types. The existing
>> > > message types and header fields are extended to support datagrams.
>> > > Semantic differences between the flow types are stated, as well as any
>> > > additional requirements for devices and drivers implementing this
>> > > feature.
>> > >
>> > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
>> > > ---
>> > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
>> > > 1 file changed, 88 insertions(+), 7 deletions(-)
>> > >
>> > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
>> > > index 7d91d159872f..638dca8e5da1 100644
>> > > --- a/device-types/vsock/description.tex
>> > > +++ b/device-types/vsock/description.tex
>> > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
>> > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
>> > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
>> > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
>> > > \end{description}
>> > >
>> > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
>> > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
>> > > consists of a (cid, port number) tuple. The header fields used for this are
>> > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
>> > >
>> > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
>> > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
>> > > +
>> > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
>> > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
>> > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
>> > >
>> > > \begin{lstlisting}
>> > > #define VIRTIO_VSOCK_TYPE_STREAM    1
>> > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
>> > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
>> > > \end{lstlisting}
>> > >
>> > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
>> > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
>> > > -connection-oriented delivery with message and record boundaries.
>> > > +connection-oriented delivery with message and record boundaries. Datagram
>> > > +sockets provide connection-less, best-effort delivery of messages, with no
>> > > +order or reliability guarantees.
>> > >
>> > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
>> > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
>> > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
>> > > communicating updates any time a change in buffer space occurs.
>> > >
>> > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
>> > > +sockets. These fields are not used for datagram buffer space management.
>> > > +
>> > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > >
>> > > \devicenormative{\paragraph}{Device Operation: Buffer Space
>> > > Management}{Device Types / Socket Device / Device Operation / Buffer
>> > > Space Management}
>> > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
>> > > -sufficient free buffer space for the payload.
>> > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
>> > > +transmitted when the peer has sufficient free buffer space for the payload.
>> > >
>> > > All packets associated with a stream flow MUST contain valid information in
>> > > \field{buf_alloc} and \field{fwd_cnt} fields.
>> > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
>> > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
>> > > \end{lstlisting}
>> > >
>> > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Drivers MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
>> > > Sockets / Fragmentation}.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
>> > > +
>> > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
>> > > +packet, they MUST follow the fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +Devices MUST support assembly of received packet fragments according to the
>> > > +fragmentation rules described in section
>> > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
>> > > +
>> > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The driver MAY drop received packets with no notification to the device. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> > > +
>> > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
>> > > +
>> > > +The device MAY drop received packets with no notification to the driver. This
>> > > +can happen if, for example, there are insufficient resources or no socket
>> > > +exists for the destination address.
>> >
>> > Should we provide some notification if the socket does not exist at the
>> > destination?
>> >
>>
>> Yes, I think so. I believe a start/stop congestion notification scheme
>> actually manages this issue well.
>>
>> For example, the source begins sending packets to a destination.
>>
>> The destination finds that there exists no socket for that destination
>> address. The destination sends a "stop" notification to the source that
>> contains the address in question. Meanwhile, packets are still coming in
>> but they are being dropped.
>>
>> The source receives the "stop" notification with the address and adds it
>> to the "stopped destinations" list. Any new packet destination address
>> will be compared to that list. Any matches will be dropped before
>> sending (and ideally, before wasting time allocating the packet).
>>
>> Only when a socket is bound to an address that matches a "stopped"
>> address does the destination send a "start" notification to any source
>> it has previusly sent a "stop" notification to.

mmm, keeping the state forever could facilitate a DoS, perhaps we
should provide a timeout after which to try again

>>
>> Once "start" is received, flow may resume as normal.
>
>Again, dropping as control flow tactic has a bunch of problems.
>Blocking senders sounds more reasonable.

Yep, I think so.

>
>
>> > > +
>> > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
>> > > +
>> > > +\field{flags} may have the following bit set:
>> > > +
>> > > +\begin{lstlisting}
>> > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
>> > > +\end{lstlisting}
>> > > +
>> > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
>> > > +it indicates that the current payload is the end of a datagram fragment
>> > > OR that
>> > > +the current payload is an entire datagram packet.
>> >
>> > In the destination, if we discard some fragments, then could we
>> > reconstruct a different datagram from the one sent?
>> >
>> > Is that anything acceptable?
>> >
>>
>> Dropping fragments should be explicitly disallowed. The sender is
>> explicitly disallowed from NOT placing fragments on the virtqueue, but I
>> see that I am missing the piece that states that they may not be dropped
>> on the receive side.
>>
>> I think it is worth mentioning that implicit in this spec is that
>> socket-to-socket dgram communication is unreliable, but device-to-driver
>> (and vice versa) is still reliable. That is, we can rely at least on the
>> virtqueues to work... and if they fail then the device/driver can simply
>> requeue (think send_pkt_queue in Linux)... so there is some reliability
>> at the lowest layer.

Yep, we should clarify this better.

Thanks,
Stefano


---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org

[virtio-dev] Re: [PATCH] virtio-vsock: add VIRTIO_VSOCK_F_DGRAM feature bit

[Bobby Eshleman]

On Wed, Sep 06, 2023 at 04:28:12PM +0200, Stefano Garzarella wrote:
> On Sat, Sep 02, 2023 at 04:35:25AM -0400, Michael S. Tsirkin wrote:
> > On Sat, Sep 02, 2023 at 04:56:42AM +0000, Bobby Eshleman wrote:
> > > On Fri, Sep 01, 2023 at 02:45:14PM +0200, Stefano Garzarella wrote:
> > > > On Tue, Aug 29, 2023 at 09:29:45PM +0000, Bobby Eshleman wrote:
> > > > > This adds support for datagrams to the virtio-vsock device.
> > > > >
> > > > > virtio-vsock already supports stream and seqpacket types. The existing
> > > > > message types and header fields are extended to support datagrams.
> > > > > Semantic differences between the flow types are stated, as well as any
> > > > > additional requirements for devices and drivers implementing this
> > > > > feature.
> > > > >
> > > > > Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
> > > > > ---
> > > > > device-types/vsock/description.tex | 95 +++++++++++++++++++++++++++---
> > > > > 1 file changed, 88 insertions(+), 7 deletions(-)
> > > > >
> > > > > diff --git a/device-types/vsock/description.tex b/device-types/vsock/description.tex
> > > > > index 7d91d159872f..638dca8e5da1 100644
> > > > > --- a/device-types/vsock/description.tex
> > > > > +++ b/device-types/vsock/description.tex
> > > > > @@ -20,6 +20,7 @@ \subsection{Feature bits}\label{sec:Device Types / Socket Device / Feature bits}
> > > > > \item[VIRTIO_VSOCK_F_STREAM (0)] stream socket type is supported.
> > > > > \item[VIRTIO_VSOCK_F_SEQPACKET (1)] seqpacket socket type is supported.
> > > > > \item[VIRTIO_VSOCK_F_NO_IMPLIED_STREAM (2)] stream socket type is not implied.
> > > > > +\item[VIRTIO_VSOCK_F_DGRAM (3)] datagram socket type is supported.
> > > > > \end{description}
> > > > >
> > > > > \drivernormative{\subsubsection}{Feature bits}{Device Types / Socket Device / Feature bits}
> > > > > @@ -167,17 +168,22 @@ \subsubsection{Addressing}\label{sec:Device Types / Socket Device / Device Opera
> > > > > consists of a (cid, port number) tuple. The header fields used for this are
> > > > > \field{src_cid}, \field{src_port}, \field{dst_cid}, and \field{dst_port}.
> > > > >
> > > > > -Currently stream and seqpacket sockets are supported. \field{type} is 1 (VIRTIO_VSOCK_TYPE_STREAM)
> > > > > -for stream socket types, and 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for seqpacket socket types.
> > > > > +
> > > > > +Currently stream, seqpacket, and datagram sockets are supported. \field{type} is
> > > > > +1 (VIRTIO_VSOCK_TYPE_STREAM) for stream socket types, 2 (VIRTIO_VSOCK_TYPE_SEQPACKET) for
> > > > > +seqpacket socket types, and 3 (VIRTIO_VSOCK_TYPE_DGRAM) for datagram socket types.
> > > > >
> > > > > \begin{lstlisting}
> > > > > #define VIRTIO_VSOCK_TYPE_STREAM    1
> > > > > #define VIRTIO_VSOCK_TYPE_SEQPACKET 2
> > > > > +#define VIRTIO_VSOCK_TYPE_DGRAM     3
> > > > > \end{lstlisting}
> > > > >
> > > > > Stream sockets provide in-order, guaranteed, connection-oriented delivery
> > > > > without message boundaries. Seqpacket sockets provide in-order, guaranteed,
> > > > > -connection-oriented delivery with message and record boundaries.
> > > > > +connection-oriented delivery with message and record boundaries. Datagram
> > > > > +sockets provide connection-less, best-effort delivery of messages, with no
> > > > > +order or reliability guarantees.
> > > > >
> > > > > \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > \field{buf_alloc} and \field{fwd_cnt} are used for buffer space management of
> > > > > @@ -203,16 +209,19 @@ \subsubsection{Buffer Space Management}\label{sec:Device Types / Socket Device /
> > > > > previously receiving a VIRTIO_VSOCK_OP_CREDIT_REQUEST packet. This allows
> > > > > communicating updates any time a change in buffer space occurs.
> > > > >
> > > > > +\field{buf_alloc} and \field{fwd_cnt} are reserved for future use by datagram
> > > > > +sockets. These fields are not used for datagram buffer space management.
> > > > > +
> > > > > \drivernormative{\paragraph}{Device Operation: Buffer Space Management}{Device Types / Socket Device / Device Operation / Buffer Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >
> > > > > All packets associated with a stream flow MUST contain valid information in
> > > > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > >
> > > > > \devicenormative{\paragraph}{Device Operation: Buffer Space
> > > > > Management}{Device Types / Socket Device / Device Operation / Buffer
> > > > > Space Management}
> > > > > -VIRTIO_VSOCK_OP_RW data packets MUST only be transmitted when the peer has
> > > > > -sufficient free buffer space for the payload.
> > > > > +For stream and seqpacket flows, VIRTIO_VSOCK_OP_RW data packets MUST only be
> > > > > +transmitted when the peer has sufficient free buffer space for the payload.
> > > > >
> > > > > All packets associated with a stream flow MUST contain valid information in
> > > > > \field{buf_alloc} and \field{fwd_cnt} fields.
> > > > > @@ -299,6 +308,78 @@ \subsubsection{Seqpacket Sockets}\label{sec:Device Types / Socket Device / Devic
> > > > > #define VIRTIO_VSOCK_SEQ_EOR (1 << 1)
> > > > > \end{lstlisting}
> > > > >
> > > > > +\subsubsection{Datagram Sockets}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets}
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Drivers MAY disassemble packets into smaller fragments. If drivers fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Drivers MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram
> > > > > Sockets / Fragmentation}.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Fragmentation}{Device Types / Socket Device / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +Devices MAY disassemble packets into smaller fragments. If devices fragment a
> > > > > +packet, they MUST follow the fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +Devices MUST support assembly of received packet fragments according to the
> > > > > +fragmentation rules described in section
> > > > > +\ref{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}.
> > > > > +
> > > > > +\drivernormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The driver MAY drop received packets with no notification to the device. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > > > +
> > > > > +\devicenormative{\paragraph}{Device Operation: Packet Dropping}{Device Types / Socket Device / Datagram Sockets / Dropping}
> > > > > +
> > > > > +The device MAY drop received packets with no notification to the driver. This
> > > > > +can happen if, for example, there are insufficient resources or no socket
> > > > > +exists for the destination address.
> > > >
> > > > Should we provide some notification if the socket does not exist at the
> > > > destination?
> > > >
> > > 
> > > Yes, I think so. I believe a start/stop congestion notification scheme
> > > actually manages this issue well.
> > > 
> > > For example, the source begins sending packets to a destination.
> > > 
> > > The destination finds that there exists no socket for that destination
> > > address. The destination sends a "stop" notification to the source that
> > > contains the address in question. Meanwhile, packets are still coming in
> > > but they are being dropped.
> > > 
> > > The source receives the "stop" notification with the address and adds it
> > > to the "stopped destinations" list. Any new packet destination address
> > > will be compared to that list. Any matches will be dropped before
> > > sending (and ideally, before wasting time allocating the packet).
> > > 
> > > Only when a socket is bound to an address that matches a "stopped"
> > > address does the destination send a "start" notification to any source
> > > it has previusly sent a "stop" notification to.
> 
> mmm, keeping the state forever could facilitate a DoS, perhaps we
> should provide a timeout after which to try again
> 
> > > 
> > > Once "start" is received, flow may resume as normal.
> > 
> > Again, dropping as control flow tactic has a bunch of problems.
> > Blocking senders sounds more reasonable.
> 
> Yep, I think so.
> 
> > 
> > 
> > > > > +
> > > > > +\paragraph{Datagram Fragmentation}\label{sec:Device Types / Socket Device / Device Operation / Datagram Sockets / Fragmentation}
> > > > > +
> > > > > +\field{flags} may have the following bit set:
> > > > > +
> > > > > +\begin{lstlisting}
> > > > > +#define VIRTIO_VSOCK_DGRAM_EOM (1 << 0)
> > > > > +\end{lstlisting}
> > > > > +
> > > > > +When the header \field{flags} field bit VIRTIO_VSOCK_DGRAM_EOM (bit 0) is set,
> > > > > +it indicates that the current payload is the end of a datagram fragment
> > > > > OR that
> > > > > +the current payload is an entire datagram packet.
> > > >
> > > > In the destination, if we discard some fragments, then could we
> > > > reconstruct a different datagram from the one sent?
> > > >
> > > > Is that anything acceptable?
> > > >
> > > 
> > > Dropping fragments should be explicitly disallowed. The sender is
> > > explicitly disallowed from NOT placing fragments on the virtqueue, but I
> > > see that I am missing the piece that states that they may not be dropped
> > > on the receive side.
> > > 
> > > I think it is worth mentioning that implicit in this spec is that
> > > socket-to-socket dgram communication is unreliable, but device-to-driver
> > > (and vice versa) is still reliable. That is, we can rely at least on the
> > > virtqueues to work... and if they fail then the device/driver can simply
> > > requeue (think send_pkt_queue in Linux)... so there is some reliability
> > > at the lowest layer.
> 
> Yep, we should clarify this better.
> 

Got it.

Thanks,
Bobby

---------------------------------------------------------------------
To unsubscribe, e-mail: virtio-dev-unsubscribe@lists.oasis-open.org
For additional commands, e-mail: virtio-dev-help@lists.oasis-open.org