All of lore.kernel.org
 help / color / mirror / Atom feed
From: Fan Ni <fan.ni@samsung.com>
To: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: "Michael Tokarev" <mjt@tls.msk.ru>,
	"qemu-devel@nongnu.org" <qemu-devel@nongnu.org>,
	"Michael Tsirkin" <mst@redhat.com>,
	"Philippe Mathieu-Daudé" <philmd@linaro.org>,
	"linuxarm@huawei.com" <linuxarm@huawei.com>
Subject: Re: [PATCH v2 2/4] hw/cxl: Use switch statements for read and write of cachemem registers
Date: Mon, 18 Sep 2023 16:32:07 +0000	[thread overview]
Message-ID: <20230918163201.GA3330830@sjcvldevvm72> (raw)
In-Reply-To: <20230915170418.21337-3-Jonathan.Cameron@huawei.com>

On Fri, Sep 15, 2023 at 06:04:16PM +0100, Jonathan Cameron wrote:

> Establishing that only register accesses of size 4 and 8 can occur
> using these functions requires looking at their callers. Make it
> easier to see that by using switch statements.
> Assertions are used to enforce that the register storage is of the
> matching size, allowing fixed values to be used for divisors of
> the array indices.
> 
> Suggested-by: Michael Tokarev <mjt@tls.msk.ru>
> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
> ---

Reviewed-by: Fan Ni <fan.ni@samsung.com>

> v2: Use switch statements. Note we coudl have renamed registers to make
>     the sizes visible as is true of some other cases, but that felt odd
>     as this is the only size these registers can be, so why call it out.
>     The asserts do the same job.
>  hw/cxl/cxl-component-utils.c | 65 +++++++++++++++++++++++-------------
>  1 file changed, 42 insertions(+), 23 deletions(-)
> 
> diff --git a/hw/cxl/cxl-component-utils.c b/hw/cxl/cxl-component-utils.c
> index f3bbf0fd13..7ef3ef2bd6 100644
> --- a/hw/cxl/cxl-component-utils.c
> +++ b/hw/cxl/cxl-component-utils.c
> @@ -67,16 +67,24 @@ static uint64_t cxl_cache_mem_read_reg(void *opaque, hwaddr offset,
>      CXLComponentState *cxl_cstate = opaque;
>      ComponentRegisters *cregs = &cxl_cstate->crb;
>  
> -    if (size == 8) {
> +    switch (size) {
> +    case 4:
> +        if (cregs->special_ops && cregs->special_ops->read) {
> +            return cregs->special_ops->read(cxl_cstate, offset, 4);
> +        } else {
> +            static_assert(sizeof(*cregs->cache_mem_registers) == 4);
> +            return cregs->cache_mem_registers[offset / 4];
> +        }
> +    case 8:
>          qemu_log_mask(LOG_UNIMP,
>                        "CXL 8 byte cache mem registers not implemented\n");
>          return 0;
> -    }
> -
> -    if (cregs->special_ops && cregs->special_ops->read) {
> -        return cregs->special_ops->read(cxl_cstate, offset, size);
> -    } else {
> -        return cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
> +    default:
> +        /*
> +         * In line with specifiction limitaions on access sizes, this
> +         * routine is not called with other sizes.
> +         */
> +        g_assert_not_reached();
>      }
>  }
>  
> @@ -117,25 +125,36 @@ static void cxl_cache_mem_write_reg(void *opaque, hwaddr offset, uint64_t value,
>      ComponentRegisters *cregs = &cxl_cstate->crb;
>      uint32_t mask;
>  
> -    if (size == 8) {
> +    switch (size) {
> +    case 4:
> +        static_assert(sizeof(*cregs->cache_mem_regs_write_mask) == 4);
> +        static_assert(sizeof(*cregs->cache_mem_registers) == 4);
> +        mask = cregs->cache_mem_regs_write_mask[offset / 4];
> +        value &= mask;
> +        /* RO bits should remain constant. Done by reading existing value */
> +        value |= ~mask & cregs->cache_mem_registers[offset / 4];
> +        if (cregs->special_ops && cregs->special_ops->write) {
> +            cregs->special_ops->write(cxl_cstate, offset, value, size);
> +            return;
> +        }
> +
> +        if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
> +            offset <= A_CXL_HDM_DECODER3_TARGET_LIST_HI) {
> +            dumb_hdm_handler(cxl_cstate, offset, value);
> +        } else {
> +            cregs->cache_mem_registers[offset / 4] = value;
> +        }
> +        return;
> +    case 8:
>          qemu_log_mask(LOG_UNIMP,
>                        "CXL 8 byte cache mem registers not implemented\n");
>          return;
> -    }
> -    mask = cregs->cache_mem_regs_write_mask[offset / sizeof(*cregs->cache_mem_regs_write_mask)];
> -    value &= mask;
> -    /* RO bits should remain constant. Done by reading existing value */
> -    value |= ~mask & cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)];
> -    if (cregs->special_ops && cregs->special_ops->write) {
> -        cregs->special_ops->write(cxl_cstate, offset, value, size);
> -        return;
> -    }
> -
> -    if (offset >= A_CXL_HDM_DECODER_CAPABILITY &&
> -        offset <= A_CXL_HDM_DECODER3_TARGET_LIST_HI) {
> -        dumb_hdm_handler(cxl_cstate, offset, value);
> -    } else {
> -        cregs->cache_mem_registers[offset / sizeof(*cregs->cache_mem_registers)] = value;
> +    default:
> +        /*
> +         * In line with specifiction limitaions on access sizes, this
> +         * routine is not called with other sizes.
> +         */
> +        g_assert_not_reached();
>      }
>  }
>  
> -- 
> 2.39.2
> 

  reply	other threads:[~2023-09-18 16:32 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-15 17:04 [PATCH v2 0/4] hw/cxl: Line length reduction and related Jonathan Cameron via
2023-09-15 17:04 ` [PATCH v2 1/4] hw/cxl: Use a switch to explicitly check size in caps_reg_read() Jonathan Cameron via
2023-09-18 16:23   ` Fan Ni
2023-09-15 17:04 ` [PATCH v2 2/4] hw/cxl: Use switch statements for read and write of cachemem registers Jonathan Cameron via
2023-09-18 16:32   ` Fan Ni [this message]
2023-09-15 17:04 ` [PATCH v2 3/4] hw/cxl: CXLDVSECPortExtensions renamed to CXLDVSECPortExt Jonathan Cameron via
2023-09-18 16:34   ` Fan Ni
2023-09-15 17:04 ` [PATCH v2 4/4] hw/cxl: Line length reductions Jonathan Cameron via
2023-09-18 16:48   ` Fan Ni
2023-09-19  9:11     ` Jonathan Cameron via

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230918163201.GA3330830@sjcvldevvm72 \
    --to=fan.ni@samsung.com \
    --cc=Jonathan.Cameron@huawei.com \
    --cc=linuxarm@huawei.com \
    --cc=mjt@tls.msk.ru \
    --cc=mst@redhat.com \
    --cc=philmd@linaro.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.