All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Gregory CLEMENT <gregory.clement@bootlin.com>,
	Arnd Bergmann <arnd@arndb.de>,
	soc@kernel.org, arm@kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <brgl@bgdev.pl>,
	Andy Shevchenko <andy@kernel.org>,
	linux-gpio@vger.kernel.org,
	Alessandro Zummo <a.zummo@towertech.it>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	linux-rtc@vger.kernel.org,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-watchdog@vger.kernel.org
Cc: "Marek Behún" <kabel@kernel.org>
Subject: [PATCH v2 2/7] platform: cznic: Add preliminary support for Turris Omnia MCU
Date: Tue, 19 Sep 2023 12:38:10 +0200	[thread overview]
Message-ID: <20230919103815.16818-3-kabel@kernel.org> (raw)
In-Reply-To: <20230919103815.16818-1-kabel@kernel.org>

Add a new platform driver that exposes the features provided by the
microcontroller on the Turris Omnia board.

This commit adds the basic skeleton for the driver.

Signed-off-by: Marek Behún <kabel@kernel.org>
---
 .../sysfs-bus-i2c-devices-turris-omnia-mcu    |  45 ++++
 MAINTAINERS                                   |   3 +
 drivers/platform/Kconfig                      |   2 +
 drivers/platform/Makefile                     |   1 +
 drivers/platform/cznic/Kconfig                |  26 ++
 drivers/platform/cznic/Makefile               |   4 +
 .../platform/cznic/turris-omnia-mcu-base.c    | 253 ++++++++++++++++++
 drivers/platform/cznic/turris-omnia-mcu.h     |  65 +++++
 include/linux/turris-omnia-mcu-interface.h    | 194 ++++++++++++++
 9 files changed, 593 insertions(+)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 create mode 100644 drivers/platform/cznic/Kconfig
 create mode 100644 drivers/platform/cznic/Makefile
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
 create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
 create mode 100644 include/linux/turris-omnia-mcu-interface.h

diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
new file mode 100644
index 000000000000..69a4db7e20c0
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -0,0 +1,45 @@
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_features
+Date:		August 2023
+KernelVersion:	6.6
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Newer versions of the microcontroller firmware report the
+		features they support. These can be read from this file. If the
+		MCU firmware is too old, this file reads 0x0.
+
+		Format: 0x%x.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
+Date:		August 2023
+KernelVersion:	6.6
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the application
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
+Date:		August 2023
+KernelVersion:	6.6
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the version hash (commit hash) of the bootloader
+		part of the microcontroller firmware.
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/mcu_type
+Date:		August 2023
+KernelVersion:	6.6
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the microcontroller type (STM32, GD32, MKL).
+
+		Format: %s.
+
+What:		/sys/bus/i2c/devices/<mcu_device>/reset_selector
+Date:		August 2023
+KernelVersion:	6.6
+Contact:	Marek Behún <kabel@kernel.org>
+Description:	(RO) Contains the selected factory reset level, determined by
+		how long the rear reset button was held by the user during board
+		reset.
+
+		Format: %i.
diff --git a/MAINTAINERS b/MAINTAINERS
index 0a4d7d6ed63a..1396743d5f9f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2089,6 +2089,7 @@ M:	Marek Behún <kabel@kernel.org>
 S:	Maintained
 W:	https://www.turris.cz/
 F:	Documentation/ABI/testing/debugfs-moxtet
+F:	Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
 F:	Documentation/ABI/testing/sysfs-bus-moxtet-devices
 F:	Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
 F:	Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
@@ -2102,10 +2103,12 @@ F:	drivers/firmware/turris-mox-rwtm.c
 F:	drivers/gpio/gpio-moxtet.c
 F:	drivers/leds/leds-turris-omnia.c
 F:	drivers/mailbox/armada-37xx-rwtm-mailbox.c
+F:	drivers/platform/cznic/
 F:	drivers/watchdog/armada_37xx_wdt.c
 F:	include/dt-bindings/bus/moxtet.h
 F:	include/linux/armada-37xx-rwtm-mailbox.h
 F:	include/linux/moxtet.h
+F:	include/linux/turris-omnia-mcu-interface.h
 
 ARM/FARADAY FA526 PORT
 M:	Hans Ulli Kroll <ulli.kroll@googlemail.com>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 868b20361769..fef907a94001 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig"
 
 source "drivers/platform/chrome/Kconfig"
 
+source "drivers/platform/cznic/Kconfig"
+
 source "drivers/platform/mellanox/Kconfig"
 
 source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 41640172975a..cc66b5020a34 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_OLPC_EC)		+= olpc/
 obj-$(CONFIG_GOLDFISH)		+= goldfish/
 obj-$(CONFIG_CHROME_PLATFORMS)	+= chrome/
 obj-$(CONFIG_SURFACE_PLATFORMS)	+= surface/
+obj-$(CONFIG_CZNIC_PLATFORMS)	+= cznic/
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
new file mode 100644
index 000000000000..f8560ff9c1af
--- /dev/null
+++ b/drivers/platform/cznic/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menuconfig CZNIC_PLATFORMS
+	bool "Platform support for CZ.NIC's Turris hardware"
+	depends on MACH_ARMADA_38X || COMPILE_TEST
+	help
+	  Say Y here to be able to choose driver support for CZ.NIC's Turris
+	  devices. This option alone does not add any kernel code.
+
+if CZNIC_PLATFORMS
+
+config TURRIS_OMNIA_MCU
+	tristate "Turris Omnia MCU driver"
+	depends on MACH_ARMADA_38X || COMPILE_TEST
+	depends on I2C
+	help
+	  Say Y here to add support for the features implemented by the
+	  microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+	  To compile this driver as a module, choose M here; the module will be
+	  called turris-omnia-mcu.
+
+endif # CZNIC_PLATFORMS
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
new file mode 100644
index 000000000000..4d0a9586538c
--- /dev/null
+++ b/drivers/platform/cznic/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_TURRIS_OMNIA_MCU)	+= turris-omnia-mcu.o
+turris-omnia-mcu-objs		:= turris-omnia-mcu-base.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
new file mode 100644
index 000000000000..2d3c3f9c68fc
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/hex.h>
+#include <linux/module.h>
+
+#include "turris-omnia-mcu.h"
+
+static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
+				  u8 *version)
+{
+	u8 reply[20];
+	int ret;
+
+	ret = omnia_cmd_read(mcu->client, bootloader ? CMD_GET_FW_VERSION_BOOT :
+						       CMD_GET_FW_VERSION_APP,
+			     reply, sizeof(reply));
+	if (ret < 0)
+		return ret;
+
+	version[40] = '\0';
+	bin2hex(version, reply, 20);
+
+	return 0;
+}
+
+static ssize_t fw_version_hash_show(struct device *dev, char *buf,
+				    bool bootloader)
+{
+	struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+	u8 version[41];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err)
+		return err;
+
+	return sysfs_emit(buf, "%s\n", version);
+}
+
+static ssize_t fw_version_hash_application_show(struct device *dev,
+						struct device_attribute *a,
+						char *buf)
+{
+	return fw_version_hash_show(dev, buf, false);
+}
+static DEVICE_ATTR_RO(fw_version_hash_application);
+
+static ssize_t fw_version_hash_bootloader_show(struct device *dev,
+					       struct device_attribute *a,
+					       char *buf)
+{
+	return fw_version_hash_show(dev, buf, true);
+}
+static DEVICE_ATTR_RO(fw_version_hash_bootloader);
+
+static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
+				char *buf)
+{
+	struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%#x\n", mcu->features);
+}
+static DEVICE_ATTR_RO(fw_features);
+
+static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
+			     char *buf)
+{
+	struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+	return sysfs_emit(buf, "%s\n", mcu->type);
+}
+static DEVICE_ATTR_RO(mcu_type);
+
+static ssize_t reset_selector_show(struct device *dev,
+				   struct device_attribute *a, char *buf)
+{
+	int ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET);
+
+	if (ret < 0)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", ret);
+}
+static DEVICE_ATTR_RO(reset_selector);
+
+static struct attribute *omnia_mcu_attrs[] = {
+	&dev_attr_fw_version_hash_application.attr,
+	&dev_attr_fw_version_hash_bootloader.attr,
+	&dev_attr_fw_features.attr,
+	&dev_attr_mcu_type.attr,
+	&dev_attr_reset_selector.attr,
+	NULL,
+};
+
+ATTRIBUTE_GROUPS(omnia_mcu);
+
+static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
+{
+	const char *type = bootloader ? "bootloader" : "application";
+	struct device *dev = &mcu->client->dev;
+	u8 version[41];
+	int err;
+
+	err = omnia_get_version_hash(mcu, bootloader, version);
+	if (err) {
+		dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type,
+			err);
+		return;
+	}
+
+	dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
+}
+
+static const char *omnia_status_to_mcu_type(uint16_t status)
+{
+	switch (status & STS_MCU_TYPE_MASK) {
+	case STS_MCU_TYPE_STM32:
+		return "STM32";
+	case STS_MCU_TYPE_GD32:
+		return "GD32";
+	case STS_MCU_TYPE_MKL:
+		return "MKL";
+	default:
+		return "unknown";
+	}
+}
+
+static void omnia_info_missing_feature(struct device *dev, const char *feature)
+{
+	dev_info(dev,
+		 "Your board's MCU firmware does not support the %s feature.\n",
+		 feature);
+}
+
+static int omnia_mcu_read_features(struct omnia_mcu *mcu)
+{
+	static const struct {
+		uint16_t mask;
+		const char *name;
+	} features[] = {
+		{ FEAT_EXT_CMDS,		"extended control and status" },
+		{ FEAT_WDT_PING,		"watchdog pinging" },
+		{ FEAT_LED_STATE_EXT_MASK,	"peripheral LED pins reading" },
+		{ FEAT_NEW_INT_API,		"new interrupt API" },
+		{ FEAT_POWEROFF_WAKEUP,		"poweroff and wakeup" },
+	};
+	struct device *dev = &mcu->client->dev;
+	bool suggest_fw_upgrade = false;
+	int status;
+
+	status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD);
+	if (status < 0)
+		return status;
+
+	/* check whether MCU firmware supports the CMD_GET_FEAUTRES command */
+	if (status & STS_FEATURES_SUPPORTED) {
+		int val = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES);
+
+		if (val < 0)
+			return val;
+
+		mcu->features = val;
+	} else {
+		omnia_info_missing_feature(dev, "feature reading");
+		suggest_fw_upgrade = true;
+	}
+
+	mcu->type = omnia_status_to_mcu_type(status);
+	dev_info(dev, "MCU type %s%s\n", mcu->type,
+		 (mcu->features & FEAT_PERIPH_MCU) ?
+			", with peripheral resets wired" : "");
+
+	omnia_mcu_print_version_hash(mcu, true);
+
+	if (mcu->features & FEAT_BOOTLOADER)
+		dev_warn(dev,
+			 "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
+	else
+		omnia_mcu_print_version_hash(mcu, false);
+
+	for (int i = 0; i < ARRAY_SIZE(features); ++i) {
+		if (!(mcu->features & features[i].mask)) {
+			omnia_info_missing_feature(dev, features[i].name);
+			suggest_fw_upgrade = true;
+		}
+	}
+
+	if (suggest_fw_upgrade)
+		dev_info(dev,
+			 "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
+
+	return 0;
+}
+
+static int omnia_mcu_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct omnia_mcu *mcu;
+	int ret;
+
+	mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+	if (!mcu)
+		return -ENOMEM;
+
+	mcu->client = client;
+	i2c_set_clientdata(client, mcu);
+
+	ret = omnia_mcu_read_features(mcu);
+	if (ret) {
+		dev_err(dev, "Cannot determine MCU supported features: %d\n",
+			ret);
+		return ret;
+	}
+
+	if (!client->irq) {
+		dev_err(dev, "IRQ resource not found\n");
+		return -ENODATA;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id of_omnia_mcu_match[] = {
+	{ .compatible = "cznic,turris-omnia-mcu", },
+	{},
+};
+
+static const struct i2c_device_id omnia_mcu_id[] = {
+	{ "turris-omnia-mcu", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, omnia_mcu_id);
+
+static struct i2c_driver omnia_mcu_driver = {
+	.probe		= omnia_mcu_probe,
+	.id_table	= omnia_mcu_id,
+	.driver		= {
+		.name	= "turris-omnia-mcu",
+		.of_match_table = of_omnia_mcu_match,
+		.dev_groups = omnia_mcu_groups,
+	},
+};
+
+module_i2c_driver(omnia_mcu_driver);
+
+MODULE_AUTHOR("Marek Behun <kabel@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
new file mode 100644
index 000000000000..a045b114e293
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __DRIVERS_PLATFORM_CZNIC_TURRIS_OMNIA_MCU_H
+#define __DRIVERS_PLATFORM_CZNIC_TURRIS_OMNIA_MCU_H
+
+#include <asm/byteorder.h>
+#include <linux/i2c.h>
+#include <linux/turris-omnia-mcu-interface.h>
+
+struct omnia_mcu {
+	struct i2c_client *client;
+	const char *type;
+	u16 features;
+};
+
+static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+				 unsigned int len)
+{
+	struct i2c_msg msgs[2];
+	int ret;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = 0;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+	msgs[1].addr = client->addr;
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].len = len;
+	msgs[1].buf = reply;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (likely(ret == ARRAY_SIZE(msgs)))
+		return len;
+	else if (ret < 0)
+		return ret;
+	else
+		return -EIO;
+}
+
+static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
+{
+	u16 reply;
+	int ret;
+
+	ret = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+	return ret < 0 ? ret : le16_to_cpu(reply);
+}
+
+static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
+{
+	u8 reply;
+	int ret;
+
+	ret = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+	return ret < 0 ? ret : reply;
+}
+
+#endif /* __DRIVERS_PLATFORM_CZNIC_TURRIS_OMNIA_MCU_H */
diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h
new file mode 100644
index 000000000000..888dc74c5ec0
--- /dev/null
+++ b/include/linux/turris-omnia-mcu-interface.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __INCLUDE_LINUX_TURRIS_OMNIA_MCU_INTERFACE_H
+#define __INCLUDE_LINUX_TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bits.h>
+
+enum commands_e {
+	CMD_GET_STATUS_WORD		= 0x01, /* slave sends status word back */
+	CMD_GENERAL_CONTROL		= 0x02,
+	CMD_LED_MODE			= 0x03, /* default/user */
+	CMD_LED_STATE			= 0x04, /* LED on/off */
+	CMD_LED_COLOR			= 0x05, /* LED number + RED + GREEN + BLUE */
+	CMD_USER_VOLTAGE		= 0x06,
+	CMD_SET_BRIGHTNESS		= 0x07,
+	CMD_GET_BRIGHTNESS		= 0x08,
+	CMD_GET_RESET			= 0x09,
+	CMD_GET_FW_VERSION_APP		= 0x0A, /* 20B git hash number */
+	CMD_SET_WATCHDOG_STATE		= 0x0B, /* 0 - disable
+						 * 1 - enable / ping
+						 * after boot watchdog is started
+						 * with 2 minutes timeout
+						 */
+
+	/* CMD_WATCHDOG_STATUS		= 0x0C, not implemented anymore */
+
+	CMD_GET_WATCHDOG_STATE		= 0x0D,
+	CMD_GET_FW_VERSION_BOOT		= 0x0E, /* 20B git hash number */
+	CMD_GET_FW_CHECKSUM		= 0x0F, /* 4B length, 4B checksum */
+
+	/* available if FEATURES_SUPPORTED bit set in status word */
+	CMD_GET_FEATURES		= 0x10,
+
+	/* available if EXT_CMD bit set in features */
+	CMD_GET_EXT_STATUS_DWORD	= 0x11,
+	CMD_EXT_CONTROL			= 0x12,
+	CMD_GET_EXT_CONTROL_STATUS	= 0x13,
+
+	/* available if NEW_INT_API bit set in features */
+	CMD_GET_INT_AND_CLEAR		= 0x14,
+	CMD_GET_INT_MASK		= 0x15,
+	CMD_SET_INT_MASK		= 0x16,
+
+	/* available if FLASHING bit set in features */
+	CMD_FLASH			= 0x19,
+
+	/* available if WDT_PING bit set in features */
+	CMD_SET_WDT_TIMEOUT		= 0x20,
+	CMD_GET_WDT_TIMELEFT		= 0x21,
+
+	/* available if POWEROFF_WAKEUP bit set in features */
+	CMD_SET_WAKEUP			= 0x22,
+	CMD_GET_UPTIME_AND_WAKEUP	= 0x23,
+	CMD_POWER_OFF			= 0x24,
+
+	/* available only at address 0x2b (led-controller) */
+	/* available only if LED_GAMMA_CORRECTION bit set in features */
+	CMD_SET_GAMMA_CORRECTION	= 0x30,
+	CMD_GET_GAMMA_CORRECTION	= 0x31,
+};
+
+enum flashing_commands_e {
+	FLASH_CMD_UNLOCK		= 0x01,
+	FLASH_CMD_SIZE_AND_CSUM		= 0x02,
+	FLASH_CMD_PROGRAM		= 0x03,
+	FLASH_CMD_RESET			= 0x04,
+};
+
+enum sts_word_e {
+	STS_MCU_TYPE_MASK			= GENMASK(1, 0),
+	STS_MCU_TYPE_STM32			= 0 << 0,
+	STS_MCU_TYPE_GD32			= 1 << 0,
+	STS_MCU_TYPE_MKL			= 2 << 0,
+	STS_FEATURES_SUPPORTED			= BIT(2),
+	STS_USER_REGULATOR_NOT_SUPPORTED	= BIT(3),
+	STS_CARD_DET				= BIT(4),
+	STS_MSATA_IND				= BIT(5),
+	STS_USB30_OVC				= BIT(6),
+	STS_USB31_OVC				= BIT(7),
+	STS_USB30_PWRON				= BIT(8),
+	STS_USB31_PWRON				= BIT(9),
+	STS_ENABLE_4V5				= BIT(10),
+	STS_BUTTON_MODE				= BIT(11),
+	STS_BUTTON_PRESSED			= BIT(12),
+	STS_BUTTON_COUNTER_MASK			= GENMASK(15, 13)
+};
+
+enum ctl_byte_e {
+	CTL_LIGHT_RST		= BIT(0),
+	CTL_HARD_RST		= BIT(1),
+	/*CTL_RESERVED		= BIT(2),*/
+	CTL_USB30_PWRON		= BIT(3),
+	CTL_USB31_PWRON		= BIT(4),
+	CTL_ENABLE_4V5		= BIT(5),
+	CTL_BUTTON_MODE		= BIT(6),
+	CTL_BOOTLOADER		= BIT(7)
+};
+
+enum features_e {
+	FEAT_PERIPH_MCU			= BIT(0),
+	FEAT_EXT_CMDS			= BIT(1),
+	FEAT_WDT_PING			= BIT(2),
+	FEAT_LED_STATE_EXT_MASK		= GENMASK(4, 3),
+	FEAT_LED_STATE_EXT		= 1 << 3,
+	FEAT_LED_STATE_EXT_V32		= 2 << 3,
+	FEAT_LED_GAMMA_CORRECTION	= BIT(5),
+	FEAT_NEW_INT_API		= BIT(6),
+	FEAT_BOOTLOADER			= BIT(7),
+	FEAT_FLASHING			= BIT(8),
+	FEAT_NEW_MESSAGE_API		= BIT(9),
+	FEAT_BRIGHTNESS_INT		= BIT(10),
+	FEAT_POWEROFF_WAKEUP		= BIT(11),
+};
+
+enum ext_sts_dword_e {
+	EXT_STS_SFP_nDET		= BIT(0),
+	EXT_STS_LED_STATES_MASK		= GENMASK(31, 12),
+	EXT_STS_WLAN0_MSATA_LED		= BIT(12),
+	EXT_STS_WLAN1_LED		= BIT(13),
+	EXT_STS_WLAN2_LED		= BIT(14),
+	EXT_STS_WPAN0_LED		= BIT(15),
+	EXT_STS_WPAN1_LED		= BIT(16),
+	EXT_STS_WPAN2_LED		= BIT(17),
+	EXT_STS_WAN_LED0		= BIT(18),
+	EXT_STS_WAN_LED1		= BIT(19),
+	EXT_STS_LAN0_LED0		= BIT(20),
+	EXT_STS_LAN0_LED1		= BIT(21),
+	EXT_STS_LAN1_LED0		= BIT(22),
+	EXT_STS_LAN1_LED1		= BIT(23),
+	EXT_STS_LAN2_LED0		= BIT(24),
+	EXT_STS_LAN2_LED1		= BIT(25),
+	EXT_STS_LAN3_LED0		= BIT(26),
+	EXT_STS_LAN3_LED1		= BIT(27),
+	EXT_STS_LAN4_LED0		= BIT(28),
+	EXT_STS_LAN4_LED1		= BIT(29),
+	EXT_STS_LAN5_LED0		= BIT(30),
+	EXT_STS_LAN5_LED1		= BIT(31),
+};
+
+enum ext_ctl_e {
+	EXT_CTL_nRES_MMC		= BIT(0),
+	EXT_CTL_nRES_LAN		= BIT(1),
+	EXT_CTL_nRES_PHY		= BIT(2),
+	EXT_CTL_nPERST0			= BIT(3),
+	EXT_CTL_nPERST1			= BIT(4),
+	EXT_CTL_nPERST2			= BIT(5),
+	EXT_CTL_PHY_SFP			= BIT(6),
+	EXT_CTL_PHY_SFP_AUTO		= BIT(7),
+	EXT_CTL_nVHV_CTRL		= BIT(8),
+};
+
+enum int_e {
+	INT_CARD_DET		= BIT(0),
+	INT_MSATA_IND		= BIT(1),
+	INT_USB30_OVC		= BIT(2),
+	INT_USB31_OVC		= BIT(3),
+	INT_BUTTON_PRESSED	= BIT(4),
+	INT_SFP_nDET		= BIT(5),
+	INT_BRIGHTNESS_CHANGED	= BIT(6),
+
+	INT_LED_STATES_MASK	= GENMASK(31, 12),
+	INT_WLAN0_MSATA_LED	= BIT(12),
+	INT_WLAN1_LED		= BIT(13),
+	INT_WLAN2_LED		= BIT(14),
+	INT_WPAN0_LED		= BIT(15),
+	INT_WPAN1_LED		= BIT(16),
+	INT_WPAN2_LED		= BIT(17),
+	INT_WAN_LED0		= BIT(18),
+	INT_WAN_LED1		= BIT(19),
+	INT_LAN0_LED0		= BIT(20),
+	INT_LAN0_LED1		= BIT(21),
+	INT_LAN1_LED0		= BIT(22),
+	INT_LAN1_LED1		= BIT(23),
+	INT_LAN2_LED0		= BIT(24),
+	INT_LAN2_LED1		= BIT(25),
+	INT_LAN3_LED0		= BIT(26),
+	INT_LAN3_LED1		= BIT(27),
+	INT_LAN4_LED0		= BIT(28),
+	INT_LAN4_LED1		= BIT(29),
+	INT_LAN5_LED0		= BIT(30),
+	INT_LAN5_LED1		= BIT(31),
+};
+
+enum cmd_poweroff_e {
+	CMD_POWER_OFF_POWERON_BUTTON	= BIT(0),
+	CMD_POWER_OFF_MAGIC		= 0xdead,
+};
+
+#endif /* __INCLUDE_LINUX_TURRIS_OMNIA_MCU_INTERFACE_H */
-- 
2.41.0


  parent reply	other threads:[~2023-09-19 10:38 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-19 10:38 [PATCH v2 0/7] Turris Omnia MCU driver Marek Behún
2023-09-19 10:38 ` [PATCH v2 1/7] dt-bindings: arm: add cznic,turris-omnia-mcu binding Marek Behún
2023-09-20 12:37   ` Krzysztof Kozlowski
2023-09-19 10:38 ` Marek Behún [this message]
2023-09-19 12:29   ` [PATCH v2 2/7] platform: cznic: Add preliminary support for Turris Omnia MCU Andy Shevchenko
2023-09-19 15:16     ` Marek Behún
2023-09-19 18:27       ` Andy Shevchenko
2023-09-20 14:19         ` Marek Behún
2023-09-20 14:47           ` Andy Shevchenko
2023-09-19 10:38 ` [PATCH v2 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Marek Behún
2023-09-19 13:00   ` Andy Shevchenko
2023-09-20 17:08     ` Marek Behún
2023-09-21  9:55       ` Andy Shevchenko
2023-09-21 20:25         ` Marek Behún
2023-09-22 14:18           ` Andy Shevchenko
2023-09-25 10:03             ` Marek Behún
2023-09-25 10:29               ` Andy Shevchenko
2023-09-21 18:42     ` Marek Behún
2023-09-22 14:14       ` Andy Shevchenko
2023-09-20 11:58   ` Linus Walleij
2023-09-20 13:36     ` Andy Shevchenko
2023-09-21 19:45     ` Marek Behún
2023-09-21 20:14       ` Marek Behún
2023-09-22 14:21         ` Andy Shevchenko
2023-09-19 10:38 ` [PATCH v2 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
2023-09-22 16:28   ` Marek Behún
2023-09-19 10:38 ` [PATCH v2 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog Marek Behún
2023-09-19 13:50   ` Guenter Roeck
2023-09-22 11:46     ` Marek Behún
2023-09-19 10:38 ` [PATCH v2 6/7] ARM: dts: turris-omnia: Add MCU system-controller node Marek Behún
2023-09-19 10:38 ` [PATCH v2 7/7] ARM: dts: turris-omnia: Add GPIO key node for front button Marek Behún

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230919103815.16818-3-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=andy@kernel.org \
    --cc=arm@kernel.org \
    --cc=arnd@arndb.de \
    --cc=brgl@bgdev.pl \
    --cc=gregory.clement@bootlin.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=soc@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.