From: Nishanth Menon <nm@ti.com>
To: Roger Quadros <rogerq@kernel.org>
Cc: <vigneshr@ti.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<srk@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] arm64: dts: ti: am642-evm: Add overlay for NAND expansion card
Date: Wed, 20 Sep 2023 08:58:02 -0500 [thread overview]
Message-ID: <20230920135802.3ej2wcuaruqjidel@uncouth> (raw)
In-Reply-To: <20230920133450.54226-3-rogerq@kernel.org>
On 16:34-20230920, Roger Quadros wrote:
> The NAND expansion card plugs in over the HSE (High Speed Expansion)
> connector. Add support for it.
>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> ---
> arch/arm64/boot/dts/ti/Makefile | 1 +
> arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 140 ++++++++++++++++++
> 2 files changed, 141 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 06d6f264f292..ece74085a6be 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
>
> # Boards with AM64x SoC
> dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
Also see https://lore.kernel.org/all/20230911165610.GA1362932-robh@kernel.org/
you may not get the dtbo installed when doing make dtbs_install
[...]
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Nishanth Menon <nm@ti.com>
To: Roger Quadros <rogerq@kernel.org>
Cc: <vigneshr@ti.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<srk@ti.com>, <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH 2/2] arm64: dts: ti: am642-evm: Add overlay for NAND expansion card
Date: Wed, 20 Sep 2023 08:58:02 -0500 [thread overview]
Message-ID: <20230920135802.3ej2wcuaruqjidel@uncouth> (raw)
In-Reply-To: <20230920133450.54226-3-rogerq@kernel.org>
On 16:34-20230920, Roger Quadros wrote:
> The NAND expansion card plugs in over the HSE (High Speed Expansion)
> connector. Add support for it.
>
> Signed-off-by: Roger Quadros <rogerq@kernel.org>
> ---
> arch/arm64/boot/dts/ti/Makefile | 1 +
> arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 140 ++++++++++++++++++
> 2 files changed, 141 insertions(+)
> create mode 100644 arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
>
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index 06d6f264f292..ece74085a6be 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
>
> # Boards with AM64x SoC
> dtb-$(CONFIG_ARCH_K3) += k3-am642-evm.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-am642-evm-nand.dtbo
> dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
> dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
Also see https://lore.kernel.org/all/20230911165610.GA1362932-robh@kernel.org/
you may not get the dtbo installed when doing make dtbs_install
[...]
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
next prev parent reply other threads:[~2023-09-20 13:58 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-20 13:34 [PATCH 0/2] arm64: dts: ti: Add overlay for AM642-EVM NAND expansion card Roger Quadros
2023-09-20 13:34 ` Roger Quadros
2023-09-20 13:34 ` [PATCH 1/2] arm64: dts: ti: Enable support for overlays for relevant boards Roger Quadros
2023-09-20 13:34 ` Roger Quadros
2023-09-20 13:57 ` Nishanth Menon
2023-09-20 13:57 ` Nishanth Menon
2023-09-20 15:14 ` Roger Quadros
2023-09-20 15:14 ` Roger Quadros
2023-09-20 13:34 ` [PATCH 2/2] arm64: dts: ti: am642-evm: Add overlay for NAND expansion card Roger Quadros
2023-09-20 13:34 ` Roger Quadros
2023-09-20 13:58 ` Nishanth Menon [this message]
2023-09-20 13:58 ` Nishanth Menon
2023-09-20 15:18 ` Roger Quadros
2023-09-20 15:18 ` Roger Quadros
2023-09-20 16:44 ` Nishanth Menon
2023-09-20 16:44 ` Nishanth Menon
2023-09-20 17:06 ` Andrew Davis
2023-09-20 17:06 ` Andrew Davis
2023-09-21 11:37 ` Roger Quadros
2023-09-21 11:37 ` Roger Quadros
2023-09-21 17:23 ` Andrew Davis
2023-09-21 17:23 ` Andrew Davis
2023-09-22 9:03 ` Roger Quadros
2023-09-22 9:03 ` Roger Quadros
2023-09-22 14:54 ` Andrew Davis
2023-09-22 14:54 ` Andrew Davis
2023-09-22 20:09 ` Rob Herring
2023-09-22 20:09 ` Rob Herring
2024-01-23 20:07 ` Roger Quadros
2024-01-23 20:07 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230920135802.3ej2wcuaruqjidel@uncouth \
--to=nm@ti.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=rogerq@kernel.org \
--cc=srk@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.