[PATCH v3 0/4] add LVTS support for mt7988

[PATCH v3 0/4] add LVTS support for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series makes allows soc specific temperature coefficients
and adds support for mt7988 which has a different one.

Frank Wunderlich (4):
  dt-bindings: thermal: mediatek: add mt7988 lvts compatible
  dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
  thermal/drivers/mediatek/lvts_thermal: make coeff configurable
  thermal/drivers/mediatek/lvts_thermal: add mt7988 support

 .../thermal/mediatek,lvts-thermal.yaml        |  1 +
 drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
 .../thermal/mediatek,lvts-thermal.h           |  9 ++
 3 files changed, 82 insertions(+), 17 deletions(-)

-- 
2.34.1

[PATCH v3 0/4] add LVTS support for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series makes allows soc specific temperature coefficients
and adds support for mt7988 which has a different one.

Frank Wunderlich (4):
  dt-bindings: thermal: mediatek: add mt7988 lvts compatible
  dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
  thermal/drivers/mediatek/lvts_thermal: make coeff configurable
  thermal/drivers/mediatek/lvts_thermal: add mt7988 support

 .../thermal/mediatek,lvts-thermal.yaml        |  1 +
 drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
 .../thermal/mediatek,lvts-thermal.h           |  9 ++
 3 files changed, 82 insertions(+), 17 deletions(-)

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 0/4] add LVTS support for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

This series makes allows soc specific temperature coefficients
and adds support for mt7988 which has a different one.

Frank Wunderlich (4):
  dt-bindings: thermal: mediatek: add mt7988 lvts compatible
  dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
  thermal/drivers/mediatek/lvts_thermal: make coeff configurable
  thermal/drivers/mediatek/lvts_thermal: add mt7988 support

 .../thermal/mediatek,lvts-thermal.yaml        |  1 +
 drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
 .../thermal/mediatek,lvts-thermal.h           |  9 ++
 3 files changed, 82 insertions(+), 17 deletions(-)

-- 
2.34.1

[PATCH v3 1/4] dt-bindings: thermal: mediatek: add mt7988 lvts compatible

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatible string for mt7988 lvts application processor.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v2:
- change mt7988-lvts to mt7988-lvts-ap (Application Processor)
- not added Ack from Rob because of this change
---
 .../devicetree/bindings/thermal/mediatek,lvts-thermal.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index fe9ae4c425c0..e6665af52ee6 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - mediatek,mt7988-lvts-ap
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
-- 
2.34.1

[PATCH v3 1/4] dt-bindings: thermal: mediatek: add mt7988 lvts compatible

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatible string for mt7988 lvts application processor.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v2:
- change mt7988-lvts to mt7988-lvts-ap (Application Processor)
- not added Ack from Rob because of this change
---
 .../devicetree/bindings/thermal/mediatek,lvts-thermal.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index fe9ae4c425c0..e6665af52ee6 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - mediatek,mt7988-lvts-ap
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 1/4] dt-bindings: thermal: mediatek: add mt7988 lvts compatible

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add compatible string for mt7988 lvts application processor.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
v2:
- change mt7988-lvts to mt7988-lvts-ap (Application Processor)
- not added Ack from Rob because of this change
---
 .../devicetree/bindings/thermal/mediatek,lvts-thermal.yaml       | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
index fe9ae4c425c0..e6665af52ee6 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/mediatek,lvts-thermal.yaml
@@ -18,6 +18,7 @@ description: |
 properties:
   compatible:
     enum:
+      - mediatek,mt7988-lvts-ap
       - mediatek,mt8192-lvts-ap
       - mediatek,mt8192-lvts-mcu
       - mediatek,mt8195-lvts-ap
-- 
2.34.1

[PATCH v3 2/4] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add sensor constants for MT7988.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
v2:
- new patch (moved from driver code to binding header)
- give sensors more meaningful names
---
 include/dt-bindings/thermal/mediatek,lvts-thermal.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 8fa5a46675c4..8c1fdc18cf34 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -7,6 +7,15 @@
 #ifndef __MEDIATEK_LVTS_DT_H
 #define __MEDIATEK_LVTS_DT_H
 
+#define MT7988_CPU_0		0
+#define MT7988_CPU_1		1
+#define MT7988_ETH2P5G_0	2
+#define MT7988_ETH2P5G_1	3
+#define MT7988_TOPS_0		4
+#define MT7988_TOPS_1		5
+#define MT7988_ETHWARP_0	6
+#define MT7988_ETHWARP_1	7
+
 #define MT8195_MCU_BIG_CPU0     0
 #define MT8195_MCU_BIG_CPU1     1
 #define MT8195_MCU_BIG_CPU2     2
-- 
2.34.1

[PATCH v3 2/4] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add sensor constants for MT7988.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
v2:
- new patch (moved from driver code to binding header)
- give sensors more meaningful names
---
 include/dt-bindings/thermal/mediatek,lvts-thermal.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 8fa5a46675c4..8c1fdc18cf34 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -7,6 +7,15 @@
 #ifndef __MEDIATEK_LVTS_DT_H
 #define __MEDIATEK_LVTS_DT_H
 
+#define MT7988_CPU_0		0
+#define MT7988_CPU_1		1
+#define MT7988_ETH2P5G_0	2
+#define MT7988_ETH2P5G_1	3
+#define MT7988_TOPS_0		4
+#define MT7988_TOPS_1		5
+#define MT7988_ETHWARP_0	6
+#define MT7988_ETHWARP_1	7
+
 #define MT8195_MCU_BIG_CPU0     0
 #define MT8195_MCU_BIG_CPU1     1
 #define MT8195_MCU_BIG_CPU2     2
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 2/4] dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add sensor constants for MT7988.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
---
v2:
- new patch (moved from driver code to binding header)
- give sensors more meaningful names
---
 include/dt-bindings/thermal/mediatek,lvts-thermal.h | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/include/dt-bindings/thermal/mediatek,lvts-thermal.h b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
index 8fa5a46675c4..8c1fdc18cf34 100644
--- a/include/dt-bindings/thermal/mediatek,lvts-thermal.h
+++ b/include/dt-bindings/thermal/mediatek,lvts-thermal.h
@@ -7,6 +7,15 @@
 #ifndef __MEDIATEK_LVTS_DT_H
 #define __MEDIATEK_LVTS_DT_H
 
+#define MT7988_CPU_0		0
+#define MT7988_CPU_1		1
+#define MT7988_ETH2P5G_0	2
+#define MT7988_ETH2P5G_1	3
+#define MT7988_TOPS_0		4
+#define MT7988_TOPS_1		5
+#define MT7988_ETHWARP_0	6
+#define MT7988_ETHWARP_1	7
+
 #define MT8195_MCU_BIG_CPU0     0
 #define MT8195_MCU_BIG_CPU1     1
 #define MT8195_MCU_BIG_CPU2     2
-- 
2.34.1

[PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

The upcoming mt7988 has different temperature coefficients so we
cannot use constants in the functions lvts_golden_temp_init,
lvts_golden_temp_init and lvts_raw_to_temp anymore.

Add a field in the lvts_ctrl pointing to the lvts_data which now
contains the soc-specific temperature coefficents.

To make the code better readable, rename static int coeff_b to
golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2:
- rename static int coeff_b to golden_temp_offset
- rename coeff.a to temp_factor and coeff.b to temp_offset
---
 drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index effd9b00a424..c2669f405a94 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -80,8 +80,8 @@
 #define LVTS_SENSOR_MAX				4
 #define LVTS_GOLDEN_TEMP_MAX		62
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
-#define LVTS_COEFF_A				-250460
-#define LVTS_COEFF_B				250460
+#define LVTS_COEFF_A_MT8195			-250460
+#define LVTS_COEFF_B_MT8195			250460
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -94,7 +94,7 @@
 #define LVTS_MINIMUM_THRESHOLD		20000
 
 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
-static int coeff_b = LVTS_COEFF_B;
+static int golden_temp_offset;
 
 struct lvts_sensor_data {
 	int dt_id;
@@ -112,6 +112,8 @@ struct lvts_ctrl_data {
 struct lvts_data {
 	const struct lvts_ctrl_data *lvts_ctrl;
 	int num_lvts_ctrl;
+	int temp_factor;
+	int temp_offset;
 };
 
 struct lvts_sensor {
@@ -126,6 +128,7 @@ struct lvts_sensor {
 
 struct lvts_ctrl {
 	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
+	const struct lvts_data *lvts_data;
 	u32 calibration[LVTS_SENSOR_MAX];
 	u32 hw_tshut_raw_temp;
 	int num_lvts_sensor;
@@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
 
 #endif
 
-static int lvts_raw_to_temp(u32 raw_temp)
+static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
 {
 	int temperature;
 
-	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
-	temperature += coeff_b;
+	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
+	temperature += golden_temp_offset;
 
 	return temperature;
 }
 
-static u32 lvts_temp_to_raw(int temperature)
+static u32 lvts_temp_to_raw(int temperature, int temp_factor)
 {
-	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
+	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
 
-	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
+	raw_temp = div_s64(raw_temp, -temp_factor);
 
 	return raw_temp;
 }
@@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
 static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *msr = lvts_sensor->msr;
 	u32 value;
 	int rc;
@@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 	if (rc)
 		return -EAGAIN;
 
-	*temp = lvts_raw_to_temp(value & 0xFFFF);
+	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
 
 	return 0;
 }
@@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
 static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *base = lvts_sensor->base;
-	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
-	u32 raw_high = lvts_temp_to_raw(high);
+	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
+				       lvts_data->temp_factor);
+	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
 	bool should_update_thresh;
 
 	lvts_sensor->low_thresh = low;
@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
 	return 0;
 }
 
-static int lvts_golden_temp_init(struct device *dev, u32 *value)
+static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
 {
 	u32 gt;
 
@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
 	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
 		golden_temp = gt;
 
-	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
+	golden_temp_offset = golden_temp * 500 + temp_offset;
 
 	return 0;
 }
@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	 * The golden temp information is contained in the first chunk
 	 * of efuse data.
 	 */
-	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
+	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
 	if (ret)
 		return ret;
 
@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
 
 		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
+		lvts_ctrl[i].lvts_data = lvts_data;
 
 		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
 				       &lvts_data->lvts_ctrl[i]);
@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 		 * after initializing the calibration.
 		 */
 		lvts_ctrl[i].hw_tshut_raw_temp =
-			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
+			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
+					 lvts_data->temp_factor);
 
 		lvts_ctrl[i].low_thresh = INT_MIN;
 		lvts_ctrl[i].high_thresh = INT_MIN;
@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	golden_temp_offset = lvts_data->temp_offset;
+
 	ret = lvts_domain_init(dev, lvts_td, lvts_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
@@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct lvts_data mt8195_lvts_ap_data = {
 	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct of_device_id lvts_of_match[] = {
-- 
2.34.1

[PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

The upcoming mt7988 has different temperature coefficients so we
cannot use constants in the functions lvts_golden_temp_init,
lvts_golden_temp_init and lvts_raw_to_temp anymore.

Add a field in the lvts_ctrl pointing to the lvts_data which now
contains the soc-specific temperature coefficents.

To make the code better readable, rename static int coeff_b to
golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2:
- rename static int coeff_b to golden_temp_offset
- rename coeff.a to temp_factor and coeff.b to temp_offset
---
 drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index effd9b00a424..c2669f405a94 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -80,8 +80,8 @@
 #define LVTS_SENSOR_MAX				4
 #define LVTS_GOLDEN_TEMP_MAX		62
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
-#define LVTS_COEFF_A				-250460
-#define LVTS_COEFF_B				250460
+#define LVTS_COEFF_A_MT8195			-250460
+#define LVTS_COEFF_B_MT8195			250460
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -94,7 +94,7 @@
 #define LVTS_MINIMUM_THRESHOLD		20000
 
 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
-static int coeff_b = LVTS_COEFF_B;
+static int golden_temp_offset;
 
 struct lvts_sensor_data {
 	int dt_id;
@@ -112,6 +112,8 @@ struct lvts_ctrl_data {
 struct lvts_data {
 	const struct lvts_ctrl_data *lvts_ctrl;
 	int num_lvts_ctrl;
+	int temp_factor;
+	int temp_offset;
 };
 
 struct lvts_sensor {
@@ -126,6 +128,7 @@ struct lvts_sensor {
 
 struct lvts_ctrl {
 	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
+	const struct lvts_data *lvts_data;
 	u32 calibration[LVTS_SENSOR_MAX];
 	u32 hw_tshut_raw_temp;
 	int num_lvts_sensor;
@@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
 
 #endif
 
-static int lvts_raw_to_temp(u32 raw_temp)
+static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
 {
 	int temperature;
 
-	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
-	temperature += coeff_b;
+	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
+	temperature += golden_temp_offset;
 
 	return temperature;
 }
 
-static u32 lvts_temp_to_raw(int temperature)
+static u32 lvts_temp_to_raw(int temperature, int temp_factor)
 {
-	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
+	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
 
-	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
+	raw_temp = div_s64(raw_temp, -temp_factor);
 
 	return raw_temp;
 }
@@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
 static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *msr = lvts_sensor->msr;
 	u32 value;
 	int rc;
@@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 	if (rc)
 		return -EAGAIN;
 
-	*temp = lvts_raw_to_temp(value & 0xFFFF);
+	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
 
 	return 0;
 }
@@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
 static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *base = lvts_sensor->base;
-	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
-	u32 raw_high = lvts_temp_to_raw(high);
+	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
+				       lvts_data->temp_factor);
+	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
 	bool should_update_thresh;
 
 	lvts_sensor->low_thresh = low;
@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
 	return 0;
 }
 
-static int lvts_golden_temp_init(struct device *dev, u32 *value)
+static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
 {
 	u32 gt;
 
@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
 	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
 		golden_temp = gt;
 
-	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
+	golden_temp_offset = golden_temp * 500 + temp_offset;
 
 	return 0;
 }
@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	 * The golden temp information is contained in the first chunk
 	 * of efuse data.
 	 */
-	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
+	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
 	if (ret)
 		return ret;
 
@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
 
 		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
+		lvts_ctrl[i].lvts_data = lvts_data;
 
 		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
 				       &lvts_data->lvts_ctrl[i]);
@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 		 * after initializing the calibration.
 		 */
 		lvts_ctrl[i].hw_tshut_raw_temp =
-			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
+			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
+					 lvts_data->temp_factor);
 
 		lvts_ctrl[i].low_thresh = INT_MIN;
 		lvts_ctrl[i].high_thresh = INT_MIN;
@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	golden_temp_offset = lvts_data->temp_offset;
+
 	ret = lvts_domain_init(dev, lvts_td, lvts_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
@@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct lvts_data mt8195_lvts_ap_data = {
 	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct of_device_id lvts_of_match[] = {
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

The upcoming mt7988 has different temperature coefficients so we
cannot use constants in the functions lvts_golden_temp_init,
lvts_golden_temp_init and lvts_raw_to_temp anymore.

Add a field in the lvts_ctrl pointing to the lvts_data which now
contains the soc-specific temperature coefficents.

To make the code better readable, rename static int coeff_b to
golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
v2:
- rename static int coeff_b to golden_temp_offset
- rename coeff.a to temp_factor and coeff.b to temp_offset
---
 drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
 1 file changed, 34 insertions(+), 17 deletions(-)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index effd9b00a424..c2669f405a94 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -80,8 +80,8 @@
 #define LVTS_SENSOR_MAX				4
 #define LVTS_GOLDEN_TEMP_MAX		62
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
-#define LVTS_COEFF_A				-250460
-#define LVTS_COEFF_B				250460
+#define LVTS_COEFF_A_MT8195			-250460
+#define LVTS_COEFF_B_MT8195			250460
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -94,7 +94,7 @@
 #define LVTS_MINIMUM_THRESHOLD		20000
 
 static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
-static int coeff_b = LVTS_COEFF_B;
+static int golden_temp_offset;
 
 struct lvts_sensor_data {
 	int dt_id;
@@ -112,6 +112,8 @@ struct lvts_ctrl_data {
 struct lvts_data {
 	const struct lvts_ctrl_data *lvts_ctrl;
 	int num_lvts_ctrl;
+	int temp_factor;
+	int temp_offset;
 };
 
 struct lvts_sensor {
@@ -126,6 +128,7 @@ struct lvts_sensor {
 
 struct lvts_ctrl {
 	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
+	const struct lvts_data *lvts_data;
 	u32 calibration[LVTS_SENSOR_MAX];
 	u32 hw_tshut_raw_temp;
 	int num_lvts_sensor;
@@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
 
 #endif
 
-static int lvts_raw_to_temp(u32 raw_temp)
+static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
 {
 	int temperature;
 
-	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
-	temperature += coeff_b;
+	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
+	temperature += golden_temp_offset;
 
 	return temperature;
 }
 
-static u32 lvts_temp_to_raw(int temperature)
+static u32 lvts_temp_to_raw(int temperature, int temp_factor)
 {
-	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
+	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
 
-	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
+	raw_temp = div_s64(raw_temp, -temp_factor);
 
 	return raw_temp;
 }
@@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
 static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *msr = lvts_sensor->msr;
 	u32 value;
 	int rc;
@@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
 	if (rc)
 		return -EAGAIN;
 
-	*temp = lvts_raw_to_temp(value & 0xFFFF);
+	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
 
 	return 0;
 }
@@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
 static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
 {
 	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
-	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
+	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
+						   sensors[lvts_sensor->id]);
+	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
 	void __iomem *base = lvts_sensor->base;
-	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
-	u32 raw_high = lvts_temp_to_raw(high);
+	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
+				       lvts_data->temp_factor);
+	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
 	bool should_update_thresh;
 
 	lvts_sensor->low_thresh = low;
@@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
 	return 0;
 }
 
-static int lvts_golden_temp_init(struct device *dev, u32 *value)
+static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
 {
 	u32 gt;
 
@@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
 	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
 		golden_temp = gt;
 
-	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
+	golden_temp_offset = golden_temp * 500 + temp_offset;
 
 	return 0;
 }
@@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	 * The golden temp information is contained in the first chunk
 	 * of efuse data.
 	 */
-	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
+	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
 	if (ret)
 		return ret;
 
@@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
 
 		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
+		lvts_ctrl[i].lvts_data = lvts_data;
 
 		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
 				       &lvts_data->lvts_ctrl[i]);
@@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
 		 * after initializing the calibration.
 		 */
 		lvts_ctrl[i].hw_tshut_raw_temp =
-			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
+			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
+					 lvts_data->temp_factor);
 
 		lvts_ctrl[i].low_thresh = INT_MIN;
 		lvts_ctrl[i].high_thresh = INT_MIN;
@@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
+	golden_temp_offset = lvts_data->temp_offset;
+
 	ret = lvts_domain_init(dev, lvts_td, lvts_data);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
@@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct lvts_data mt8195_lvts_ap_data = {
 	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT8195,
+	.temp_offset	= LVTS_COEFF_B_MT8195,
 };
 
 static const struct of_device_id lvts_of_match[] = {
-- 
2.34.1

Re: [PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:19AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> The upcoming mt7988 has different temperature coefficients so we
> cannot use constants in the functions lvts_golden_temp_init,
> lvts_golden_temp_init and lvts_raw_to_temp anymore.
> 
> Add a field in the lvts_ctrl pointing to the lvts_data which now
> contains the soc-specific temperature coefficents.
> 
> To make the code better readable, rename static int coeff_b to
> golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v2:
> - rename static int coeff_b to golden_temp_offset
> - rename coeff.a to temp_factor and coeff.b to temp_offset
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
>  1 file changed, 34 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index effd9b00a424..c2669f405a94 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -80,8 +80,8 @@
>  #define LVTS_SENSOR_MAX				4
>  #define LVTS_GOLDEN_TEMP_MAX		62
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
> -#define LVTS_COEFF_A				-250460
> -#define LVTS_COEFF_B				250460
> +#define LVTS_COEFF_A_MT8195			-250460
> +#define LVTS_COEFF_B_MT8195			250460
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -94,7 +94,7 @@
>  #define LVTS_MINIMUM_THRESHOLD		20000
>  
>  static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
> -static int coeff_b = LVTS_COEFF_B;
> +static int golden_temp_offset;
>  
>  struct lvts_sensor_data {
>  	int dt_id;
> @@ -112,6 +112,8 @@ struct lvts_ctrl_data {
>  struct lvts_data {
>  	const struct lvts_ctrl_data *lvts_ctrl;
>  	int num_lvts_ctrl;
> +	int temp_factor;
> +	int temp_offset;
>  };
>  
>  struct lvts_sensor {
> @@ -126,6 +128,7 @@ struct lvts_sensor {
>  
>  struct lvts_ctrl {
>  	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
> +	const struct lvts_data *lvts_data;
>  	u32 calibration[LVTS_SENSOR_MAX];
>  	u32 hw_tshut_raw_temp;
>  	int num_lvts_sensor;
> @@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
>  
>  #endif
>  
> -static int lvts_raw_to_temp(u32 raw_temp)
> +static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
>  {
>  	int temperature;
>  
> -	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
> -	temperature += coeff_b;
> +	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
> +	temperature += golden_temp_offset;
>  
>  	return temperature;
>  }
>  
> -static u32 lvts_temp_to_raw(int temperature)
> +static u32 lvts_temp_to_raw(int temperature, int temp_factor)
>  {
> -	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
> +	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
>  
> -	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
> +	raw_temp = div_s64(raw_temp, -temp_factor);
>  
>  	return raw_temp;
>  }
> @@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
>  static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *msr = lvts_sensor->msr;
>  	u32 value;
>  	int rc;
> @@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  	if (rc)
>  		return -EAGAIN;
>  
> -	*temp = lvts_raw_to_temp(value & 0xFFFF);
> +	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
>  
>  	return 0;
>  }
> @@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
>  static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> -	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *base = lvts_sensor->base;
> -	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
> -	u32 raw_high = lvts_temp_to_raw(high);
> +	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
> +				       lvts_data->temp_factor);
> +	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
>  	bool should_update_thresh;
>  
>  	lvts_sensor->low_thresh = low;
> @@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
>  	return 0;
>  }
>  
> -static int lvts_golden_temp_init(struct device *dev, u32 *value)
> +static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
>  {
>  	u32 gt;
>  
> @@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
>  	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
>  		golden_temp = gt;
>  
> -	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
> +	golden_temp_offset = golden_temp * 500 + temp_offset;
>  
>  	return 0;
>  }
> @@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	 * The golden temp information is contained in the first chunk
>  	 * of efuse data.
>  	 */
> -	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
> +	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
>  	if (ret)
>  		return ret;
>  
> @@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
>  
>  		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
> +		lvts_ctrl[i].lvts_data = lvts_data;
>  
>  		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
>  				       &lvts_data->lvts_ctrl[i]);
> @@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  		 * after initializing the calibration.
>  		 */
>  		lvts_ctrl[i].hw_tshut_raw_temp =
> -			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
> +			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
> +					 lvts_data->temp_factor);
>  
>  		lvts_ctrl[i].low_thresh = INT_MIN;
>  		lvts_ctrl[i].high_thresh = INT_MIN;
> @@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
>  	if (irq < 0)
>  		return irq;
>  
> +	golden_temp_offset = lvts_data->temp_offset;
> +
>  	ret = lvts_domain_init(dev, lvts_td, lvts_data);
>  	if (ret)
>  		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
> @@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct lvts_data mt8195_lvts_ap_data = {
>  	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> -- 
> 2.34.1
> 

Re: [PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:19AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> The upcoming mt7988 has different temperature coefficients so we
> cannot use constants in the functions lvts_golden_temp_init,
> lvts_golden_temp_init and lvts_raw_to_temp anymore.
> 
> Add a field in the lvts_ctrl pointing to the lvts_data which now
> contains the soc-specific temperature coefficents.
> 
> To make the code better readable, rename static int coeff_b to
> golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v2:
> - rename static int coeff_b to golden_temp_offset
> - rename coeff.a to temp_factor and coeff.b to temp_offset
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
>  1 file changed, 34 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index effd9b00a424..c2669f405a94 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -80,8 +80,8 @@
>  #define LVTS_SENSOR_MAX				4
>  #define LVTS_GOLDEN_TEMP_MAX		62
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
> -#define LVTS_COEFF_A				-250460
> -#define LVTS_COEFF_B				250460
> +#define LVTS_COEFF_A_MT8195			-250460
> +#define LVTS_COEFF_B_MT8195			250460
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -94,7 +94,7 @@
>  #define LVTS_MINIMUM_THRESHOLD		20000
>  
>  static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
> -static int coeff_b = LVTS_COEFF_B;
> +static int golden_temp_offset;
>  
>  struct lvts_sensor_data {
>  	int dt_id;
> @@ -112,6 +112,8 @@ struct lvts_ctrl_data {
>  struct lvts_data {
>  	const struct lvts_ctrl_data *lvts_ctrl;
>  	int num_lvts_ctrl;
> +	int temp_factor;
> +	int temp_offset;
>  };
>  
>  struct lvts_sensor {
> @@ -126,6 +128,7 @@ struct lvts_sensor {
>  
>  struct lvts_ctrl {
>  	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
> +	const struct lvts_data *lvts_data;
>  	u32 calibration[LVTS_SENSOR_MAX];
>  	u32 hw_tshut_raw_temp;
>  	int num_lvts_sensor;
> @@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
>  
>  #endif
>  
> -static int lvts_raw_to_temp(u32 raw_temp)
> +static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
>  {
>  	int temperature;
>  
> -	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
> -	temperature += coeff_b;
> +	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
> +	temperature += golden_temp_offset;
>  
>  	return temperature;
>  }
>  
> -static u32 lvts_temp_to_raw(int temperature)
> +static u32 lvts_temp_to_raw(int temperature, int temp_factor)
>  {
> -	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
> +	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
>  
> -	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
> +	raw_temp = div_s64(raw_temp, -temp_factor);
>  
>  	return raw_temp;
>  }
> @@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
>  static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *msr = lvts_sensor->msr;
>  	u32 value;
>  	int rc;
> @@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  	if (rc)
>  		return -EAGAIN;
>  
> -	*temp = lvts_raw_to_temp(value & 0xFFFF);
> +	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
>  
>  	return 0;
>  }
> @@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
>  static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> -	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *base = lvts_sensor->base;
> -	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
> -	u32 raw_high = lvts_temp_to_raw(high);
> +	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
> +				       lvts_data->temp_factor);
> +	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
>  	bool should_update_thresh;
>  
>  	lvts_sensor->low_thresh = low;
> @@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
>  	return 0;
>  }
>  
> -static int lvts_golden_temp_init(struct device *dev, u32 *value)
> +static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
>  {
>  	u32 gt;
>  
> @@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
>  	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
>  		golden_temp = gt;
>  
> -	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
> +	golden_temp_offset = golden_temp * 500 + temp_offset;
>  
>  	return 0;
>  }
> @@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	 * The golden temp information is contained in the first chunk
>  	 * of efuse data.
>  	 */
> -	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
> +	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
>  	if (ret)
>  		return ret;
>  
> @@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
>  
>  		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
> +		lvts_ctrl[i].lvts_data = lvts_data;
>  
>  		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
>  				       &lvts_data->lvts_ctrl[i]);
> @@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  		 * after initializing the calibration.
>  		 */
>  		lvts_ctrl[i].hw_tshut_raw_temp =
> -			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
> +			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
> +					 lvts_data->temp_factor);
>  
>  		lvts_ctrl[i].low_thresh = INT_MIN;
>  		lvts_ctrl[i].high_thresh = INT_MIN;
> @@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
>  	if (irq < 0)
>  		return irq;
>  
> +	golden_temp_offset = lvts_data->temp_offset;
> +
>  	ret = lvts_domain_init(dev, lvts_td, lvts_data);
>  	if (ret)
>  		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
> @@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct lvts_data mt8195_lvts_ap_data = {
>  	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> -- 
> 2.34.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 3/4] thermal/drivers/mediatek/lvts_thermal: make coeff configurable

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:19AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> The upcoming mt7988 has different temperature coefficients so we
> cannot use constants in the functions lvts_golden_temp_init,
> lvts_golden_temp_init and lvts_raw_to_temp anymore.
> 
> Add a field in the lvts_ctrl pointing to the lvts_data which now
> contains the soc-specific temperature coefficents.
> 
> To make the code better readable, rename static int coeff_b to
> golden_temp_offset, COEFF_A to temp_factor and COEFF_B to temp_offset.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v2:
> - rename static int coeff_b to golden_temp_offset
> - rename coeff.a to temp_factor and coeff.b to temp_offset
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 51 ++++++++++++++++---------
>  1 file changed, 34 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index effd9b00a424..c2669f405a94 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -80,8 +80,8 @@
>  #define LVTS_SENSOR_MAX				4
>  #define LVTS_GOLDEN_TEMP_MAX		62
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
> -#define LVTS_COEFF_A				-250460
> -#define LVTS_COEFF_B				250460
> +#define LVTS_COEFF_A_MT8195			-250460
> +#define LVTS_COEFF_B_MT8195			250460
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -94,7 +94,7 @@
>  #define LVTS_MINIMUM_THRESHOLD		20000
>  
>  static int golden_temp = LVTS_GOLDEN_TEMP_DEFAULT;
> -static int coeff_b = LVTS_COEFF_B;
> +static int golden_temp_offset;
>  
>  struct lvts_sensor_data {
>  	int dt_id;
> @@ -112,6 +112,8 @@ struct lvts_ctrl_data {
>  struct lvts_data {
>  	const struct lvts_ctrl_data *lvts_ctrl;
>  	int num_lvts_ctrl;
> +	int temp_factor;
> +	int temp_offset;
>  };
>  
>  struct lvts_sensor {
> @@ -126,6 +128,7 @@ struct lvts_sensor {
>  
>  struct lvts_ctrl {
>  	struct lvts_sensor sensors[LVTS_SENSOR_MAX];
> +	const struct lvts_data *lvts_data;
>  	u32 calibration[LVTS_SENSOR_MAX];
>  	u32 hw_tshut_raw_temp;
>  	int num_lvts_sensor;
> @@ -247,21 +250,21 @@ static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
>  
>  #endif
>  
> -static int lvts_raw_to_temp(u32 raw_temp)
> +static int lvts_raw_to_temp(u32 raw_temp, int temp_factor)
>  {
>  	int temperature;
>  
> -	temperature = ((s64)(raw_temp & 0xFFFF) * LVTS_COEFF_A) >> 14;
> -	temperature += coeff_b;
> +	temperature = ((s64)(raw_temp & 0xFFFF) * temp_factor) >> 14;
> +	temperature += golden_temp_offset;
>  
>  	return temperature;
>  }
>  
> -static u32 lvts_temp_to_raw(int temperature)
> +static u32 lvts_temp_to_raw(int temperature, int temp_factor)
>  {
> -	u32 raw_temp = ((s64)(coeff_b - temperature)) << 14;
> +	u32 raw_temp = ((s64)(golden_temp_offset - temperature)) << 14;
>  
> -	raw_temp = div_s64(raw_temp, -LVTS_COEFF_A);
> +	raw_temp = div_s64(raw_temp, -temp_factor);
>  
>  	return raw_temp;
>  }
> @@ -269,6 +272,9 @@ static u32 lvts_temp_to_raw(int temperature)
>  static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *msr = lvts_sensor->msr;
>  	u32 value;
>  	int rc;
> @@ -301,7 +307,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
>  	if (rc)
>  		return -EAGAIN;
>  
> -	*temp = lvts_raw_to_temp(value & 0xFFFF);
> +	*temp = lvts_raw_to_temp(value & 0xFFFF, lvts_data->temp_factor);
>  
>  	return 0;
>  }
> @@ -348,10 +354,13 @@ static bool lvts_should_update_thresh(struct lvts_ctrl *lvts_ctrl, int high)
>  static int lvts_set_trips(struct thermal_zone_device *tz, int low, int high)
>  {
>  	struct lvts_sensor *lvts_sensor = thermal_zone_device_priv(tz);
> -	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl, sensors[lvts_sensor->id]);
> +	struct lvts_ctrl *lvts_ctrl = container_of(lvts_sensor, struct lvts_ctrl,
> +						   sensors[lvts_sensor->id]);
> +	const struct lvts_data *lvts_data = lvts_ctrl->lvts_data;
>  	void __iomem *base = lvts_sensor->base;
> -	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD);
> -	u32 raw_high = lvts_temp_to_raw(high);
> +	u32 raw_low = lvts_temp_to_raw(low != -INT_MAX ? low : LVTS_MINIMUM_THRESHOLD,
> +				       lvts_data->temp_factor);
> +	u32 raw_high = lvts_temp_to_raw(high, lvts_data->temp_factor);
>  	bool should_update_thresh;
>  
>  	lvts_sensor->low_thresh = low;
> @@ -692,7 +701,7 @@ static int lvts_calibration_read(struct device *dev, struct lvts_domain *lvts_td
>  	return 0;
>  }
>  
> -static int lvts_golden_temp_init(struct device *dev, u32 *value)
> +static int lvts_golden_temp_init(struct device *dev, u32 *value, int temp_offset)
>  {
>  	u32 gt;
>  
> @@ -701,7 +710,7 @@ static int lvts_golden_temp_init(struct device *dev, u32 *value)
>  	if (gt && gt < LVTS_GOLDEN_TEMP_MAX)
>  		golden_temp = gt;
>  
> -	coeff_b = golden_temp * 500 + LVTS_COEFF_B;
> +	golden_temp_offset = golden_temp * 500 + temp_offset;
>  
>  	return 0;
>  }
> @@ -724,7 +733,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	 * The golden temp information is contained in the first chunk
>  	 * of efuse data.
>  	 */
> -	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib);
> +	ret = lvts_golden_temp_init(dev, (u32 *)lvts_td->calib, lvts_data->temp_offset);
>  	if (ret)
>  		return ret;
>  
> @@ -735,6 +744,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  	for (i = 0; i < lvts_data->num_lvts_ctrl; i++) {
>  
>  		lvts_ctrl[i].base = lvts_td->base + lvts_data->lvts_ctrl[i].offset;
> +		lvts_ctrl[i].lvts_data = lvts_data;
>  
>  		ret = lvts_sensor_init(dev, &lvts_ctrl[i],
>  				       &lvts_data->lvts_ctrl[i]);
> @@ -758,7 +768,8 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
>  		 * after initializing the calibration.
>  		 */
>  		lvts_ctrl[i].hw_tshut_raw_temp =
> -			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp);
> +			lvts_temp_to_raw(lvts_data->lvts_ctrl[i].hw_tshut_temp,
> +					 lvts_data->temp_factor);
>  
>  		lvts_ctrl[i].low_thresh = INT_MIN;
>  		lvts_ctrl[i].high_thresh = INT_MIN;
> @@ -1223,6 +1234,8 @@ static int lvts_probe(struct platform_device *pdev)
>  	if (irq < 0)
>  		return irq;
>  
> +	golden_temp_offset = lvts_data->temp_offset;
> +
>  	ret = lvts_domain_init(dev, lvts_td, lvts_data);
>  	if (ret)
>  		return dev_err_probe(dev, ret, "Failed to initialize the lvts domain\n");
> @@ -1338,11 +1351,15 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct lvts_data mt8195_lvts_ap_data = {
>  	.lvts_ctrl	= mt8195_lvts_ap_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT8195,
> +	.temp_offset	= LVTS_COEFF_B_MT8195,
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> -- 
> 2.34.1
> 

[PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Support for Mediatek Filogic 880/MT7988 LVTS.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- drop comments

v2:
- use 105°C for hw shutdown
- move constants to binding file
- change coeff.a to temp_factor and coeff.b to temp_offset
- change to lvts to lvts-ap (Application Processor)
- drop comments about efuse offsets
- change comment of mt8195 to be similar to mt7988
---
 drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index c2669f405a94..23b4e0b3195c 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -82,6 +82,8 @@
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
 #define LVTS_COEFF_A_MT8195			-250460
 #define LVTS_COEFF_B_MT8195			250460
+#define LVTS_COEFF_A_MT7988			-204650
+#define LVTS_COEFF_B_MT7988			204650
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -89,6 +91,7 @@
 #define LVTS_MSR_READ_TIMEOUT_US	400
 #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
 
+#define LVTS_HW_SHUTDOWN_MT7988		105000
 #define LVTS_HW_SHUTDOWN_MT8195		105000
 
 #define LVTS_MINIMUM_THRESHOLD		20000
@@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
+	{
+		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_CPU_0 },
+			{ .dt_id = MT7988_CPU_1 },
+			{ .dt_id = MT7988_ETH2P5G_0 },
+			{ .dt_id = MT7988_ETH2P5G_1 }
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	},
+	{
+		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_TOPS_0},
+			{ .dt_id = MT7988_TOPS_1},
+			{ .dt_id = MT7988_ETHWARP_0},
+			{ .dt_id = MT7988_ETHWARP_1}
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	}
+};
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_data mt7988_lvts_ap_data = {
+	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT7988,
+	.temp_offset	= LVTS_COEFF_B_MT7988,
+};
+
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
 };
 
 static const struct of_device_id lvts_of_match[] = {
+	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
 	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
 	{},
-- 
2.34.1

[PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Support for Mediatek Filogic 880/MT7988 LVTS.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- drop comments

v2:
- use 105°C for hw shutdown
- move constants to binding file
- change coeff.a to temp_factor and coeff.b to temp_offset
- change to lvts to lvts-ap (Application Processor)
- drop comments about efuse offsets
- change comment of mt8195 to be similar to mt7988
---
 drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index c2669f405a94..23b4e0b3195c 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -82,6 +82,8 @@
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
 #define LVTS_COEFF_A_MT8195			-250460
 #define LVTS_COEFF_B_MT8195			250460
+#define LVTS_COEFF_A_MT7988			-204650
+#define LVTS_COEFF_B_MT7988			204650
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -89,6 +91,7 @@
 #define LVTS_MSR_READ_TIMEOUT_US	400
 #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
 
+#define LVTS_HW_SHUTDOWN_MT7988		105000
 #define LVTS_HW_SHUTDOWN_MT8195		105000
 
 #define LVTS_MINIMUM_THRESHOLD		20000
@@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
+	{
+		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_CPU_0 },
+			{ .dt_id = MT7988_CPU_1 },
+			{ .dt_id = MT7988_ETH2P5G_0 },
+			{ .dt_id = MT7988_ETH2P5G_1 }
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	},
+	{
+		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_TOPS_0},
+			{ .dt_id = MT7988_TOPS_1},
+			{ .dt_id = MT7988_ETHWARP_0},
+			{ .dt_id = MT7988_ETHWARP_1}
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	}
+};
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_data mt7988_lvts_ap_data = {
+	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT7988,
+	.temp_offset	= LVTS_COEFF_B_MT7988,
+};
+
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
 };
 
 static const struct of_device_id lvts_of_match[] = {
+	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
 	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
 	{},
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Frank Wunderlich]

From: Frank Wunderlich <frank-w@public-files.de>

Add Support for Mediatek Filogic 880/MT7988 LVTS.

Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
v3:
- drop comments

v2:
- use 105°C for hw shutdown
- move constants to binding file
- change coeff.a to temp_factor and coeff.b to temp_offset
- change to lvts to lvts-ap (Application Processor)
- drop comments about efuse offsets
- change comment of mt8195 to be similar to mt7988
---
 drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
 1 file changed, 38 insertions(+)

diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index c2669f405a94..23b4e0b3195c 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -82,6 +82,8 @@
 #define LVTS_GOLDEN_TEMP_DEFAULT	50
 #define LVTS_COEFF_A_MT8195			-250460
 #define LVTS_COEFF_B_MT8195			250460
+#define LVTS_COEFF_A_MT7988			-204650
+#define LVTS_COEFF_B_MT7988			204650
 
 #define LVTS_MSR_IMMEDIATE_MODE		0
 #define LVTS_MSR_FILTERED_MODE		1
@@ -89,6 +91,7 @@
 #define LVTS_MSR_READ_TIMEOUT_US	400
 #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
 
+#define LVTS_HW_SHUTDOWN_MT7988		105000
 #define LVTS_HW_SHUTDOWN_MT8195		105000
 
 #define LVTS_MINIMUM_THRESHOLD		20000
@@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
+	{
+		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_CPU_0 },
+			{ .dt_id = MT7988_CPU_1 },
+			{ .dt_id = MT7988_ETH2P5G_0 },
+			{ .dt_id = MT7988_ETH2P5G_1 }
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x0,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	},
+	{
+		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
+		.lvts_sensor = {
+			{ .dt_id = MT7988_TOPS_0},
+			{ .dt_id = MT7988_TOPS_1},
+			{ .dt_id = MT7988_ETHWARP_0},
+			{ .dt_id = MT7988_ETHWARP_1}
+		},
+		.num_lvts_sensor = 4,
+		.offset = 0x100,
+		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
+	}
+};
+
 static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
 	{
 		.cal_offset = { 0x04, 0x07 },
@@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
 	}
 };
 
+static const struct lvts_data mt7988_lvts_ap_data = {
+	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
+	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
+	.temp_factor	= LVTS_COEFF_A_MT7988,
+	.temp_offset	= LVTS_COEFF_B_MT7988,
+};
+
 static const struct lvts_data mt8195_lvts_mcu_data = {
 	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
 	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
@@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
 };
 
 static const struct of_device_id lvts_of_match[] = {
+	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
 	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
 	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
 	{},
-- 
2.34.1

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> Add Support for Mediatek Filogic 880/MT7988 LVTS.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v3:
> - drop comments
> 
> v2:
> - use 105°C for hw shutdown
> - move constants to binding file
> - change coeff.a to temp_factor and coeff.b to temp_offset
> - change to lvts to lvts-ap (Application Processor)
> - drop comments about efuse offsets
> - change comment of mt8195 to be similar to mt7988
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index c2669f405a94..23b4e0b3195c 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -82,6 +82,8 @@
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
>  #define LVTS_COEFF_A_MT8195			-250460
>  #define LVTS_COEFF_B_MT8195			250460
> +#define LVTS_COEFF_A_MT7988			-204650
> +#define LVTS_COEFF_B_MT7988			204650
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -89,6 +91,7 @@
>  #define LVTS_MSR_READ_TIMEOUT_US	400
>  #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
>  
> +#define LVTS_HW_SHUTDOWN_MT7988		105000
>  #define LVTS_HW_SHUTDOWN_MT8195		105000
>  
>  #define LVTS_MINIMUM_THRESHOLD		20000
> @@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
> +	{
> +		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_CPU_0 },
> +			{ .dt_id = MT7988_CPU_1 },
> +			{ .dt_id = MT7988_ETH2P5G_0 },
> +			{ .dt_id = MT7988_ETH2P5G_1 }
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x0,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	},
> +	{
> +		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_TOPS_0},
> +			{ .dt_id = MT7988_TOPS_1},
> +			{ .dt_id = MT7988_ETHWARP_0},
> +			{ .dt_id = MT7988_ETHWARP_1}
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x100,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	}
> +};
> +
>  static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>  	{
>  		.cal_offset = { 0x04, 0x07 },
> @@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  	}
>  };
>  
> +static const struct lvts_data mt7988_lvts_ap_data = {
> +	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
> +	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT7988,
> +	.temp_offset	= LVTS_COEFF_B_MT7988,
> +};
> +
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> @@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> +	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
>  	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
>  	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
>  	{},
> -- 
> 2.34.1
> 

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> Add Support for Mediatek Filogic 880/MT7988 LVTS.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v3:
> - drop comments
> 
> v2:
> - use 105°C for hw shutdown
> - move constants to binding file
> - change coeff.a to temp_factor and coeff.b to temp_offset
> - change to lvts to lvts-ap (Application Processor)
> - drop comments about efuse offsets
> - change comment of mt8195 to be similar to mt7988
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index c2669f405a94..23b4e0b3195c 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -82,6 +82,8 @@
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
>  #define LVTS_COEFF_A_MT8195			-250460
>  #define LVTS_COEFF_B_MT8195			250460
> +#define LVTS_COEFF_A_MT7988			-204650
> +#define LVTS_COEFF_B_MT7988			204650
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -89,6 +91,7 @@
>  #define LVTS_MSR_READ_TIMEOUT_US	400
>  #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
>  
> +#define LVTS_HW_SHUTDOWN_MT7988		105000
>  #define LVTS_HW_SHUTDOWN_MT8195		105000
>  
>  #define LVTS_MINIMUM_THRESHOLD		20000
> @@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
> +	{
> +		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_CPU_0 },
> +			{ .dt_id = MT7988_CPU_1 },
> +			{ .dt_id = MT7988_ETH2P5G_0 },
> +			{ .dt_id = MT7988_ETH2P5G_1 }
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x0,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	},
> +	{
> +		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_TOPS_0},
> +			{ .dt_id = MT7988_TOPS_1},
> +			{ .dt_id = MT7988_ETHWARP_0},
> +			{ .dt_id = MT7988_ETHWARP_1}
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x100,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	}
> +};
> +
>  static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>  	{
>  		.cal_offset = { 0x04, 0x07 },
> @@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  	}
>  };
>  
> +static const struct lvts_data mt7988_lvts_ap_data = {
> +	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
> +	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT7988,
> +	.temp_offset	= LVTS_COEFF_B_MT7988,
> +};
> +
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> @@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> +	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
>  	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
>  	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
>  	{},
> -- 
> 2.34.1
> 

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Golle]

On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> Add Support for Mediatek Filogic 880/MT7988 LVTS.
> 
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>

Tested-by: Daniel Golle <daniel@makrotopia.org>

> ---
> v3:
> - drop comments
> 
> v2:
> - use 105°C for hw shutdown
> - move constants to binding file
> - change coeff.a to temp_factor and coeff.b to temp_offset
> - change to lvts to lvts-ap (Application Processor)
> - drop comments about efuse offsets
> - change comment of mt8195 to be similar to mt7988
> ---
>  drivers/thermal/mediatek/lvts_thermal.c | 38 +++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
> index c2669f405a94..23b4e0b3195c 100644
> --- a/drivers/thermal/mediatek/lvts_thermal.c
> +++ b/drivers/thermal/mediatek/lvts_thermal.c
> @@ -82,6 +82,8 @@
>  #define LVTS_GOLDEN_TEMP_DEFAULT	50
>  #define LVTS_COEFF_A_MT8195			-250460
>  #define LVTS_COEFF_B_MT8195			250460
> +#define LVTS_COEFF_A_MT7988			-204650
> +#define LVTS_COEFF_B_MT7988			204650
>  
>  #define LVTS_MSR_IMMEDIATE_MODE		0
>  #define LVTS_MSR_FILTERED_MODE		1
> @@ -89,6 +91,7 @@
>  #define LVTS_MSR_READ_TIMEOUT_US	400
>  #define LVTS_MSR_READ_WAIT_US		(LVTS_MSR_READ_TIMEOUT_US / 2)
>  
> +#define LVTS_HW_SHUTDOWN_MT7988		105000
>  #define LVTS_HW_SHUTDOWN_MT8195		105000
>  
>  #define LVTS_MINIMUM_THRESHOLD		20000
> @@ -1269,6 +1272,33 @@ static int lvts_remove(struct platform_device *pdev)
>  	return 0;
>  }
>  
> +static const struct lvts_ctrl_data mt7988_lvts_ap_data_ctrl[] = {
> +	{
> +		.cal_offset = { 0x00, 0x04, 0x08, 0x0c },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_CPU_0 },
> +			{ .dt_id = MT7988_CPU_1 },
> +			{ .dt_id = MT7988_ETH2P5G_0 },
> +			{ .dt_id = MT7988_ETH2P5G_1 }
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x0,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	},
> +	{
> +		.cal_offset = { 0x14, 0x18, 0x1c, 0x20 },
> +		.lvts_sensor = {
> +			{ .dt_id = MT7988_TOPS_0},
> +			{ .dt_id = MT7988_TOPS_1},
> +			{ .dt_id = MT7988_ETHWARP_0},
> +			{ .dt_id = MT7988_ETHWARP_1}
> +		},
> +		.num_lvts_sensor = 4,
> +		.offset = 0x100,
> +		.hw_tshut_temp = LVTS_HW_SHUTDOWN_MT7988,
> +	}
> +};
> +
>  static const struct lvts_ctrl_data mt8195_lvts_mcu_data_ctrl[] = {
>  	{
>  		.cal_offset = { 0x04, 0x07 },
> @@ -1348,6 +1378,13 @@ static const struct lvts_ctrl_data mt8195_lvts_ap_data_ctrl[] = {
>  	}
>  };
>  
> +static const struct lvts_data mt7988_lvts_ap_data = {
> +	.lvts_ctrl	= mt7988_lvts_ap_data_ctrl,
> +	.num_lvts_ctrl	= ARRAY_SIZE(mt7988_lvts_ap_data_ctrl),
> +	.temp_factor	= LVTS_COEFF_A_MT7988,
> +	.temp_offset	= LVTS_COEFF_B_MT7988,
> +};
> +
>  static const struct lvts_data mt8195_lvts_mcu_data = {
>  	.lvts_ctrl	= mt8195_lvts_mcu_data_ctrl,
>  	.num_lvts_ctrl	= ARRAY_SIZE(mt8195_lvts_mcu_data_ctrl),
> @@ -1363,6 +1400,7 @@ static const struct lvts_data mt8195_lvts_ap_data = {
>  };
>  
>  static const struct of_device_id lvts_of_match[] = {
> +	{ .compatible = "mediatek,mt7988-lvts-ap", .data = &mt7988_lvts_ap_data },
>  	{ .compatible = "mediatek,mt8195-lvts-mcu", .data = &mt8195_lvts_mcu_data },
>  	{ .compatible = "mediatek,mt8195-lvts-ap", .data = &mt8195_lvts_ap_data },
>  	{},
> -- 
> 2.34.1
> 

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Lezcano]

On 28/09/2023 01:56, Daniel Golle wrote:
> On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
>> From: Frank Wunderlich <frank-w@public-files.de>
>>
>> Add Support for Mediatek Filogic 880/MT7988 LVTS.
>>
>> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Tested-by: Daniel Golle <daniel@makrotopia.org>
> 

Thanks for the testing tag

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Lezcano]

On 28/09/2023 01:56, Daniel Golle wrote:
> On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
>> From: Frank Wunderlich <frank-w@public-files.de>
>>
>> Add Support for Mediatek Filogic 880/MT7988 LVTS.
>>
>> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Tested-by: Daniel Golle <daniel@makrotopia.org>
> 

Thanks for the testing tag

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 4/4] thermal/drivers/mediatek/lvts_thermal: add mt7988 support

[Daniel Lezcano]

On 28/09/2023 01:56, Daniel Golle wrote:
> On Fri, Sep 22, 2023 at 07:50:20AM +0200, Frank Wunderlich wrote:
>> From: Frank Wunderlich <frank-w@public-files.de>
>>
>> Add Support for Mediatek Filogic 880/MT7988 LVTS.
>>
>> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> 
> Tested-by: Daniel Golle <daniel@makrotopia.org>
> 

Thanks for the testing tag

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v3 0/4] add LVTS support for mt7988

[Daniel Lezcano]

On 22/09/2023 07:50, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> This series makes allows soc specific temperature coefficients
> and adds support for mt7988 which has a different one.
> 
> Frank Wunderlich (4):
>    dt-bindings: thermal: mediatek: add mt7988 lvts compatible
>    dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
>    thermal/drivers/mediatek/lvts_thermal: make coeff configurable
>    thermal/drivers/mediatek/lvts_thermal: add mt7988 support
> 
>   .../thermal/mediatek,lvts-thermal.yaml        |  1 +
>   drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
>   .../thermal/mediatek,lvts-thermal.h           |  9 ++
>   3 files changed, 82 insertions(+), 17 deletions(-)
> 

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: [PATCH v3 0/4] add LVTS support for mt7988

[Daniel Lezcano]

On 22/09/2023 07:50, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> This series makes allows soc specific temperature coefficients
> and adds support for mt7988 which has a different one.
> 
> Frank Wunderlich (4):
>    dt-bindings: thermal: mediatek: add mt7988 lvts compatible
>    dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
>    thermal/drivers/mediatek/lvts_thermal: make coeff configurable
>    thermal/drivers/mediatek/lvts_thermal: add mt7988 support
> 
>   .../thermal/mediatek,lvts-thermal.yaml        |  1 +
>   drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
>   .../thermal/mediatek,lvts-thermal.h           |  9 ++
>   3 files changed, 82 insertions(+), 17 deletions(-)
> 

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v3 0/4] add LVTS support for mt7988

[Daniel Lezcano]

On 22/09/2023 07:50, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> This series makes allows soc specific temperature coefficients
> and adds support for mt7988 which has a different one.
> 
> Frank Wunderlich (4):
>    dt-bindings: thermal: mediatek: add mt7988 lvts compatible
>    dt-bindings: thermal: mediatek: Add LVTS thermal sensors for mt7988
>    thermal/drivers/mediatek/lvts_thermal: make coeff configurable
>    thermal/drivers/mediatek/lvts_thermal: add mt7988 support
> 
>   .../thermal/mediatek,lvts-thermal.yaml        |  1 +
>   drivers/thermal/mediatek/lvts_thermal.c       | 89 +++++++++++++++----
>   .../thermal/mediatek,lvts-thermal.h           |  9 ++
>   3 files changed, 82 insertions(+), 17 deletions(-)
> 

Applied, thanks

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog