From: Shawn Guo <shawnguo@kernel.org>
To: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Cc: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux@ew.tq-group.com
Subject: Re: [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
Date: Mon, 25 Sep 2023 08:59:11 +0800 [thread overview]
Message-ID: <20230925005911.GA7231@dragon> (raw)
In-Reply-To: <20230829-for-ml-tqmls10xxa-v2-test-v2-3-b1da63785b25@ew.tq-group.com>
On Tue, Aug 29, 2023 at 11:26:59AM +0200, Gregor Herburger wrote:
> This adds support for the TQMLS1043A and TQMLS1046A SOM and the
> MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
> and can be used on the MBLS10xxA.
>
> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 +
> .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++
> .../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++
> .../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++
> .../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++
> .../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++
> .../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++
> 8 files changed, 479 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index c6872b7e9471..8bb67d1e8f4d 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..599101d06f74
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1043a-tqmls1043a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
> + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
> + "fsl,ls1043a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
Sort the list alphabetically.
Shawn
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1043-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> new file mode 100644
> index 000000000000..12d5f3938e5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1043A based SoM of TQ
> + */
> +
> +#include "fsl-ls1043a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..12e1460bd3da
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1046a-tqmls1046a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
> + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
> + "fsl,ls1046a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&dspi {
> + status = "okay";
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1046-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> +
> +&enet7 {
> + status = "disabled";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> new file mode 100644
> index 000000000000..4a8f8bc688f5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1046A based SoM of TQ
> + */
> +
> +#include "fsl-ls1046a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +
> + qflash1: flash@1 {
> + compatible = "jedec,spi-nor";
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> new file mode 100644
> index 000000000000..4c38dd541143
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
> + */
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +&enet0 {
> + status = "disabled";
> +};
> +
> +&enet1 {
> + status = "disabled";
> +};
> +
> +&enet2 {
> + phy-handle = <&rgmii_phy1>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet3 {
> + phy-handle = <&rgmii_phy2>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet4 {
> + status = "disabled";
> +};
> +
> +&enet5 {
> + status = "disabled";
> +};
> +
> +&enet6 {
> + status = "disabled";
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + qsgmii2_phy1: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x00>;
> + };
> +
> + qsgmii2_phy2: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x01>;
> + };
> +
> + qsgmii2_phy3: ethernet-phy@2 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x02>;
> + };
> +
> + qsgmii2_phy4: ethernet-phy@3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x03>;
> + };
> +
> + rgmii_phy2: ethernet-phy@c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0c>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + rgmii_phy1: ethernet-phy@e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0e>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + qsgmii1_phy1: ethernet-phy@1c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1c>;
> + };
> +
> + qsgmii1_phy2: ethernet-phy@1d {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1d>;
> + };
> +
> + qsgmii1_phy3: ethernet-phy@1e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1e>;
> + };
> +
> + qsgmii1_phy4: ethernet-phy@1f {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1f>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> new file mode 100644
> index 000000000000..65b4ed28a3d4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> + autorepeat;
> +
> + button-0 {
> + label = "button0";
> + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F1>;
> + };
> +
> + button-1 {
> + label = "button1";
> + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F2>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-user {
> + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_HEARTBEAT;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_MB";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&esdhc {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9544";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + reg = <0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpioexp1: gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp2: gpio@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp3: gpio@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + sfp1_i2c: i2c@1 {
> + reg = <0x1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + sfp2_i2c: i2c@2 {
> + reg = <0x2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c@3 {
> + reg = <0x3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + dr_mode = "otg";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> new file mode 100644
> index 000000000000..138f8778afde
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for TQMLs10xxA SoM of TQ
> + */
> +
> +/ {
> + reg_vcc3v3: regulator-vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + temperature-sensor@18 {
> + compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> + reg = <0x18>;
> + };
> +
> + eeprom@50 {
> + compatible = "nxp,se97b", "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + vcc-supply = <®_vcc3v3>;
> + read-only;
> + };
> +
> + rtc@51 {
> + compatible = "nxp,pcf85063a";
> + reg = <0x51>;
> + };
> +
> + eeprom@57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + vcc-supply = <®_vcc3v3>;
> + };
> +};
> +
> +&esdhc {
> + /* eSDHC or eMMC: set by bootloader */
> + non-removable;
> + disable-wp;
> + mmc-hs200-1_8v;
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> +};
>
> --
> 2.34.1
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Shawn Guo <shawnguo@kernel.org>
To: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Cc: Li Yang <leoyang.li@nxp.com>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux@ew.tq-group.com
Subject: Re: [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A
Date: Mon, 25 Sep 2023 08:59:11 +0800 [thread overview]
Message-ID: <20230925005911.GA7231@dragon> (raw)
In-Reply-To: <20230829-for-ml-tqmls10xxa-v2-test-v2-3-b1da63785b25@ew.tq-group.com>
On Tue, Aug 29, 2023 at 11:26:59AM +0200, Gregor Herburger wrote:
> This adds support for the TQMLS1043A and TQMLS1046A SOM and the
> MBLS10xxA baseboard. TQMLS1043A and TQMLS1046A share a common layout
> and can be used on the MBLS10xxA.
>
> Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
> ---
> arch/arm64/boot/dts/freescale/Makefile | 2 +
> .../freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts | 49 ++++++++
> .../boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi | 32 +++++
> .../freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts | 56 +++++++++
> .../boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi | 42 +++++++
> .../dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi | 104 ++++++++++++++++
> .../boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi | 136 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi | 58 +++++++++
> 8 files changed, 479 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index c6872b7e9471..8bb67d1e8f4d 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -15,9 +15,11 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-tqmls1043a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-frwy.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
> +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-tqmls1046a-mbls10xxa.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
> dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-ten64.dtb
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..599101d06f74
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a-mbls10xxa.dts
> @@ -0,0 +1,49 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1043a-tqmls1043a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1043A TQMLS1043A SoM on MBLS10xxA board";
> + compatible = "tq,ls1043a-tqmls1043a-mbls10xxa", "tq,ls1043a-tqmls1043a",
> + "fsl,ls1043a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
Sort the list alphabetically.
Shawn
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1043-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> new file mode 100644
> index 000000000000..12d5f3938e5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-tqmls1043a.dtsi
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1043A based SoM of TQ
> + */
> +
> +#include "fsl-ls1043a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> new file mode 100644
> index 000000000000..12e1460bd3da
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a-mbls10xxa.dts
> @@ -0,0 +1,56 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +
> +#include "fsl-ls1046a-tqmls1046a.dtsi"
> +#include "tqmls10xxa-mbls10xxa.dtsi"
> +
> +/ {
> + model = "TQ-Systems GmbH LS1046A TQMLS1046A SoM on MBLS10xxA board";
> + compatible = "tq,ls1046a-tqmls1046a-mbls10xxa", "tq,ls1046a-tqmls1046a",
> + "fsl,ls1046a";
> +
> + aliases {
> + serial0 = &duart0;
> + serial1 = &duart1;
> + qsgmii-s1-p1 = &qsgmii1_phy1;
> + qsgmii-s1-p2 = &qsgmii1_phy2;
> + qsgmii-s1-p3 = &qsgmii1_phy3;
> + qsgmii-s1-p4 = &qsgmii1_phy4;
> + qsgmii-s2-p1 = &qsgmii2_phy1;
> + qsgmii-s2-p2 = &qsgmii2_phy2;
> + qsgmii-s2-p3 = &qsgmii2_phy3;
> + qsgmii-s2-p4 = &qsgmii2_phy4;
> + };
> +
> + chosen {
> + stdout-path = &duart1;
> + };
> +};
> +
> +&dspi {
> + status = "okay";
> +};
> +
> +&esdhc {
> + cd-gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
> + wp-gpios = <&gpio3 3 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&usb2 {
> + status = "okay";
> +};
> +
> +#include "fsl-ls1046-post.dtsi"
> +#include "tqmls104xa-mbls10xxa-fman.dtsi"
> +
> +&enet7 {
> + status = "disabled";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> new file mode 100644
> index 000000000000..4a8f8bc688f5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-tqmls1046a.dtsi
> @@ -0,0 +1,42 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for LS1046A based SoM of TQ
> + */
> +
> +#include "fsl-ls1046a.dtsi"
> +#include "tqmls10xxa.dtsi"
> +
> +&qspi {
> + num-cs = <2>;
> + status = "okay";
> +
> + qflash0: flash@0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> +
> + partitions {
> + compatible = "fixed-partitions";
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> + };
> +
> + qflash1: flash@1 {
> + compatible = "jedec,spi-nor";
> + reg = <1>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + spi-max-frequency = <62500000>;
> + spi-rx-bus-width = <4>;
> + spi-tx-bus-width = <4>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> new file mode 100644
> index 000000000000..4c38dd541143
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls104xa-mbls10xxa-fman.dtsi
> @@ -0,0 +1,104 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2019,2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ (FMAN related sections)
> + */
> +
> +#include <dt-bindings/net/ti-dp83867.h>
> +
> +&enet0 {
> + status = "disabled";
> +};
> +
> +&enet1 {
> + status = "disabled";
> +};
> +
> +&enet2 {
> + phy-handle = <&rgmii_phy1>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet3 {
> + phy-handle = <&rgmii_phy2>;
> + phy-connection-type = "rgmii";
> + phy-mode = "rgmii-id";
> + status = "okay";
> +};
> +
> +&enet4 {
> + status = "disabled";
> +};
> +
> +&enet5 {
> + status = "disabled";
> +};
> +
> +&enet6 {
> + status = "disabled";
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + qsgmii2_phy1: ethernet-phy@0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x00>;
> + };
> +
> + qsgmii2_phy2: ethernet-phy@1 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x01>;
> + };
> +
> + qsgmii2_phy3: ethernet-phy@2 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x02>;
> + };
> +
> + qsgmii2_phy4: ethernet-phy@3 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x03>;
> + };
> +
> + rgmii_phy2: ethernet-phy@c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0c>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + rgmii_phy1: ethernet-phy@e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x0e>;
> + ti,rx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,tx-internal-delay = <DP83867_RGMIIDCTL_1_50_NS>;
> + ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
> + };
> +
> + qsgmii1_phy1: ethernet-phy@1c {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1c>;
> + };
> +
> + qsgmii1_phy2: ethernet-phy@1d {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1d>;
> + };
> +
> + qsgmii1_phy3: ethernet-phy@1e {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1e>;
> + };
> +
> + qsgmii1_phy4: ethernet-phy@1f {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0x1f>;
> + };
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> new file mode 100644
> index 000000000000..65b4ed28a3d4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa-mbls10xxa.dtsi
> @@ -0,0 +1,136 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for MBLS10xxA from TQ
> + */
> +
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + poll-interval = <100>;
> + autorepeat;
> +
> + button-0 {
> + label = "button0";
> + gpios = <&gpioexp3 5 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F1>;
> + };
> +
> + button-1 {
> + label = "button1";
> + gpios = <&gpioexp3 6 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_F2>;
> + };
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> +
> + led-user {
> + gpios = <&gpioexp3 13 GPIO_ACTIVE_LOW>;
> + color = <LED_COLOR_ID_GREEN>;
> + function = LED_FUNCTION_HEARTBEAT;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + reg_3v3: regulator-3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "V_3V3_MB";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +};
> +
> +&duart0 {
> + status = "okay";
> +};
> +
> +&duart1 {
> + status = "okay";
> +};
> +
> +&esdhc {
> + status = "okay";
> +};
> +
> +&i2c3 {
> + status = "okay";
> +
> + i2c-mux@70 {
> + compatible = "nxp,pca9544";
> + reg = <0x70>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + i2c@0 {
> + reg = <0x0>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + gpioexp1: gpio@20 {
> + compatible = "nxp,pca9555";
> + reg = <0x20>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp2: gpio@21 {
> + compatible = "nxp,pca9555";
> + reg = <0x21>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioexp3: gpio@22 {
> + compatible = "nxp,pca9555";
> + reg = <0x22>;
> + vcc-supply = <®_3v3>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> + };
> +
> + sfp1_i2c: i2c@1 {
> + reg = <0x1>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + sfp2_i2c: i2c@2 {
> + reg = <0x2>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c@3 {
> + reg = <0x3>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + };
> + };
> +};
> +
> +&sata {
> + status = "okay";
> +};
> +
> +&usb0 {
> + status = "okay";
> +};
> +
> +&usb1 {
> + dr_mode = "otg";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> new file mode 100644
> index 000000000000..138f8778afde
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/tqmls10xxa.dtsi
> @@ -0,0 +1,58 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (c) 2018-2023 TQ-Systems GmbH <linux@ew.tq-group.com>,
> + * D-82229 Seefeld, Germany.
> + * Author: Gregor Herburger, Timo Herbrecher
> + *
> + * Device Tree Include file for TQMLs10xxA SoM of TQ
> + */
> +
> +/ {
> + reg_vcc3v3: regulator-vcc3v3 {
> + compatible = "regulator-fixed";
> + regulator-name = "VCC3V3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + temperature-sensor@18 {
> + compatible = "nxp,se97b", "jedec,jc-42.4-temp";
> + reg = <0x18>;
> + };
> +
> + eeprom@50 {
> + compatible = "nxp,se97b", "atmel,24c02";
> + reg = <0x50>;
> + pagesize = <16>;
> + vcc-supply = <®_vcc3v3>;
> + read-only;
> + };
> +
> + rtc@51 {
> + compatible = "nxp,pcf85063a";
> + reg = <0x51>;
> + };
> +
> + eeprom@57 {
> + compatible = "atmel,24c64";
> + reg = <0x57>;
> + pagesize = <32>;
> + vcc-supply = <®_vcc3v3>;
> + };
> +};
> +
> +&esdhc {
> + /* eSDHC or eMMC: set by bootloader */
> + non-removable;
> + disable-wp;
> + mmc-hs200-1_8v;
> + sd-uhs-sdr104;
> + sd-uhs-sdr50;
> + sd-uhs-sdr25;
> + sd-uhs-sdr12;
> +};
>
> --
> 2.34.1
>
next prev parent reply other threads:[~2023-09-25 0:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-08-29 9:26 [PATCH v2 0/6] TQMLS10xxA support Gregor Herburger
2023-08-29 9:26 ` Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 1/6] arm64: dts: ls1043a: remove second dspi node Gregor Herburger
2023-08-29 9:26 ` Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 2/6] dt-bindings: arm: fsl: Add TQ-Systems LS1043A/LS1046A based boards Gregor Herburger
2023-08-29 9:26 ` Gregor Herburger
2023-08-29 9:26 ` [PATCH v2 3/6] arm64: dts: freescale: add initial device tree for TQMLS1043A/TQMLS1046A Gregor Herburger
2023-08-29 9:26 ` Gregor Herburger
2023-09-25 0:59 ` Shawn Guo [this message]
2023-09-25 0:59 ` Shawn Guo
2023-08-29 9:27 ` [PATCH v2 4/6] dt-bindings: arm: fsl: Add TQ-Systems LS1088 based boards Gregor Herburger
2023-08-29 9:27 ` Gregor Herburger
2023-08-29 9:27 ` [PATCH v2 5/6] arm64: dts: freescale: add initial device tree for TQMLS1088A Gregor Herburger
2023-08-29 9:27 ` Gregor Herburger
2023-08-29 9:27 ` [PATCH v2 6/6] MAINTAINERS: add tqml device trees to TQ-Systems entry Gregor Herburger
2023-08-29 9:27 ` Gregor Herburger
2023-09-25 1:04 ` Shawn Guo
2023-09-25 1:04 ` Shawn Guo
2023-09-25 5:30 ` Arnd Bergmann
2023-09-25 5:30 ` Arnd Bergmann
2023-09-25 6:48 ` Krzysztof Kozlowski
2023-09-25 6:48 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230925005911.GA7231@dragon \
--to=shawnguo@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gregor.herburger@ew.tq-group.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@ew.tq-group.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.