All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andre Przywara <andre.przywara@arm.com>
To: Jagan Teki <jagan@amarulasolutions.com>, u-boot@lists.denx.de
Cc: Samuel Holland <samuel@sholland.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Icenowy Zheng <uwu@icenowy.me>,
	Maxim Kiselev <bigunclemax@gmail.com>,
	Sam Edwards <cfsworks@gmail.com>,
	Okhunjon Sobirjonov <okhunjon72@gmail.com>,
	linux-sunxi@lists.linux.dev, andre.przywara@arm.com,
	andre.przywara@foss.arm.com
Subject: [PATCH v2 11/22] pinctrl: sunxi: add Allwinner D1 pinctrl description
Date: Thu, 28 Sep 2023 22:54:44 +0100	[thread overview]
Message-ID: <20230928215455.28094-12-andre.przywara@arm.com> (raw)
In-Reply-To: <20230928215455.28094-1-andre.przywara@arm.com>

Apart from using the new pinctrl MMIO register layout, the Allwinner D1
and related SoCs still need to usual set of mux values hardcoded in
U-Boot's pinctrl driver.
Add the values we need so far to this list, so that DM based drivers
will just work without further ado.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
 drivers/pinctrl/sunxi/Kconfig         |  4 ++++
 drivers/pinctrl/sunxi/pinctrl-sunxi.c | 28 +++++++++++++++++++++++++++
 2 files changed, 32 insertions(+)

diff --git a/drivers/pinctrl/sunxi/Kconfig b/drivers/pinctrl/sunxi/Kconfig
index 77da90836b6..c8f937d91e9 100644
--- a/drivers/pinctrl/sunxi/Kconfig
+++ b/drivers/pinctrl/sunxi/Kconfig
@@ -124,4 +124,8 @@ config PINCTRL_SUN50I_H616_R
 	default MACH_SUN50I_H616
 	select PINCTRL_SUNXI
 
+config PINCTRL_SUN20I_D1
+	bool "Support for the Allwinner D1/R528 PIO"
+	select PINCTRL_SUNXI
+
 endif
diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index fc80fe50b14..66876d9954a 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -748,6 +748,28 @@ static const struct sunxi_pinctrl_desc __maybe_unused sun50i_h616_r_pinctrl_desc
 	.num_banks	= 1,
 };
 
+static const struct sunxi_pinctrl_function sun20i_d1_pinctrl_functions[] = {
+	{ "emac",	8 },	/* PE0-PE15 */
+	{ "gpio_in",	0 },
+	{ "gpio_out",	1 },
+	{ "mmc0",	2 },	/* PF0-PF5 */
+	{ "mmc2",	3 },	/* PC1-PC7 */
+	{ "spi0",	2 },	/* PC2-PC7 */
+#if IS_ENABLED(CONFIG_UART0_PORT_F)
+	{ "uart0",	3 },	/* PF2,PF4 */
+#else
+	{ "uart0",	6 },	/* PB0-PB1, PB8-PB9, PE2-PE3 */
+#endif
+	{ "uart3",	7 },	/* PB6-PB7 */
+};
+
+static const struct sunxi_pinctrl_desc __maybe_unused sun20i_d1_pinctrl_desc = {
+	.functions	= sun20i_d1_pinctrl_functions,
+	.num_functions	= ARRAY_SIZE(sun20i_d1_pinctrl_functions),
+	.first_bank	= SUNXI_GPIO_A,
+	.num_banks	= 7,
+};
+
 static const struct udevice_id sunxi_pinctrl_ids[] = {
 #ifdef CONFIG_PINCTRL_SUNIV_F1C100S
 	{
@@ -904,6 +926,12 @@ static const struct udevice_id sunxi_pinctrl_ids[] = {
 		.compatible = "allwinner,sun50i-h616-r-pinctrl",
 		.data = (ulong)&sun50i_h616_r_pinctrl_desc,
 	},
+#endif
+#ifdef CONFIG_PINCTRL_SUN20I_D1
+	{
+		.compatible = "allwinner,sun20i-d1-pinctrl",
+		.data = (ulong)&sun20i_d1_pinctrl_desc,
+	},
 #endif
 	{}
 };
-- 
2.35.8


  parent reply	other threads:[~2023-09-28 21:56 UTC|newest]

Thread overview: 43+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-09-28 21:54 [PATCH v2 00/22] sunxi: Allwinner T113s support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 01/22] sunxi: remove CONFIG_SATAPWR Andre Przywara
2023-10-19 23:51   ` Samuel Holland
2023-10-21 23:27     ` Andre Przywara
2023-10-22  3:34       ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 02/22] net: sunxi_emac: chase DT nodes to find PHY regulator Andre Przywara
2023-10-20  0:01   ` Samuel Holland
2023-10-21 23:33     ` Andre Przywara
2023-09-28 21:54 ` [PATCH v2 03/22] sunxi: remove CONFIG_MACPWR Andre Przywara
2023-10-21  4:35   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 04/22] pinctrl: sunxi: move pinctrl code Andre Przywara
2023-10-19  0:18   ` Andre Przywara
2023-10-21  8:21   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 05/22] pinctrl: sunxi: add GPIO in/out wrappers Andre Przywara
2023-10-21  8:30   ` Samuel Holland
2023-10-21 23:46     ` Andre Przywara
2023-09-28 21:54 ` [PATCH v2 06/22] pinctrl: sunxi: remove struct sunxi_gpio Andre Przywara
2023-10-21  8:37   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 07/22] pinctrl: sunxi: remove GPIO_EXTRA_HEADER Andre Przywara
2023-10-21  8:57   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 08/22] pinctrl: sunxi: move PIO_BASE into sunxi_gpio.h Andre Przywara
2023-09-28 21:54 ` [PATCH v2 09/22] pinctrl: sunxi: add new D1 pinctrl support Andre Przywara
2023-10-22  3:31   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 10/22] sunxi: introduce NCAT2 generation model Andre Przywara
2023-10-22  3:40   ` Samuel Holland
2023-09-28 21:54 ` Andre Przywara [this message]
2023-10-21  4:34   ` [PATCH v2 11/22] pinctrl: sunxi: add Allwinner D1 pinctrl description Samuel Holland
2023-09-28 21:54 ` [PATCH v2 12/22] clk: sunxi: Add support for the D1 CCU Andre Przywara
2023-10-19 23:53   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 13/22] sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup Andre Przywara
2023-09-28 21:54 ` [PATCH v2 14/22] sunxi: clock: support D1/R528 PLL6 clock Andre Przywara
2023-09-28 21:54 ` [PATCH v2 15/22] Kconfig: sunxi: prepare for using drivers/ram/sunxi Andre Przywara
2023-10-22  3:44   ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 16/22] sunxi: add R528/T113-s3/D1(s) DRAM initialisation code Andre Przywara
2023-10-22  3:52   ` Samuel Holland
2023-10-22 22:40     ` Andre Przywara
2023-10-23  2:58       ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 17/22] sunxi: add Allwinner R528/T113 SoC support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 18/22] sunxi: R528: add SMHC2 pin pull ups support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 19/22] sunxi: refactor serial base addresses to avoid asm/arch/cpu.h Andre Przywara
2023-09-28 21:54 ` [PATCH v2 20/22] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Andre Przywara
2023-09-28 21:54 ` [PATCH v2 21/22] ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi Andre Przywara
2023-09-28 21:54 ` [PATCH v2 22/22] sunxi: add MangoPi MQ-R board support Andre Przywara

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230928215455.28094-12-andre.przywara@arm.com \
    --to=andre.przywara@arm.com \
    --cc=andre.przywara@foss.arm.com \
    --cc=bigunclemax@gmail.com \
    --cc=cfsworks@gmail.com \
    --cc=jagan@amarulasolutions.com \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=okhunjon72@gmail.com \
    --cc=samuel@sholland.org \
    --cc=u-boot@lists.denx.de \
    --cc=uwu@icenowy.me \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.