From: Andre Przywara <andre.przywara@arm.com>
To: Jagan Teki <jagan@amarulasolutions.com>, u-boot@lists.denx.de
Cc: Samuel Holland <samuel@sholland.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Icenowy Zheng <uwu@icenowy.me>,
Maxim Kiselev <bigunclemax@gmail.com>,
Sam Edwards <cfsworks@gmail.com>,
Okhunjon Sobirjonov <okhunjon72@gmail.com>,
linux-sunxi@lists.linux.dev, andre.przywara@arm.com,
andre.przywara@foss.arm.com
Subject: [PATCH v2 14/22] sunxi: clock: support D1/R528 PLL6 clock
Date: Thu, 28 Sep 2023 22:54:47 +0100 [thread overview]
Message-ID: <20230928215455.28094-15-andre.przywara@arm.com> (raw)
In-Reply-To: <20230928215455.28094-1-andre.przywara@arm.com>
The PLL_PERIPH0 clock changed a bit in the D1/R528/T113s SoCs: there is
new P0 divider at bits [18:16], and the M divider is 1.
Add code to support this version of "PLL6".
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
---
.../include/asm/arch-sunxi/clock_sun50i_h6.h | 2 ++
arch/arm/mach-sunxi/clock_sun50i_h6.c | 24 +++++++++++++------
2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
index 9895c2c220e..8471e11aa02 100644
--- a/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
+++ b/arch/arm/include/asm/arch-sunxi/clock_sun50i_h6.h
@@ -249,6 +249,8 @@ struct sunxi_ccm_reg {
#define CCM_PLL6_CTRL_EN BIT(31)
#define CCM_PLL6_LOCK_EN BIT(29)
#define CCM_PLL6_LOCK BIT(28)
+#define CCM_PLL6_CTRL_P0_SHIFT 16
+#define CCM_PLL6_CTRL_P0_MASK (0x7 << CCM_PLL6_CTRL_P0_SHIFT)
#define CCM_PLL6_CTRL_N_SHIFT 8
#define CCM_PLL6_CTRL_N_MASK (0xff << CCM_PLL6_CTRL_N_SHIFT)
#define CCM_PLL6_CTRL_DIV1_SHIFT 0
diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index d32e33465f5..daae994787e 100644
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -110,16 +110,26 @@ unsigned int clock_get_pll6(void)
{
struct sunxi_ccm_reg *const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
- int m = IS_ENABLED(CONFIG_MACH_SUN50I_H6) ? 4 : 2;
-
uint32_t rval = readl(&ccm->pll6_cfg);
int n = ((rval & CCM_PLL6_CTRL_N_MASK) >> CCM_PLL6_CTRL_N_SHIFT) + 1;
- int div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
- CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
int div2 = ((rval & CCM_PLL6_CTRL_DIV2_MASK) >>
- CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
- /* The register defines PLL6-2X or PLL6-4X, not plain PLL6 */
- return 24000000 / m * n / div1 / div2;
+ CCM_PLL6_CTRL_DIV2_SHIFT) + 1;
+ int div1, m;
+
+ if (IS_ENABLED(CONFIG_SUNXI_GEN_NCAT2)) {
+ div1 = ((rval & CCM_PLL6_CTRL_P0_MASK) >>
+ CCM_PLL6_CTRL_P0_SHIFT) + 1;
+ m = 1;
+ } else {
+ div1 = ((rval & CCM_PLL6_CTRL_DIV1_MASK) >>
+ CCM_PLL6_CTRL_DIV1_SHIFT) + 1;
+ if (IS_ENABLED(CONFIG_MACH_SUN50I_H6))
+ m = 4;
+ else
+ m = 2;
+ }
+
+ return 24000000U * n / m / div1 / div2;
}
int clock_twi_onoff(int port, int state)
--
2.35.8
next prev parent reply other threads:[~2023-09-28 21:56 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-09-28 21:54 [PATCH v2 00/22] sunxi: Allwinner T113s support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 01/22] sunxi: remove CONFIG_SATAPWR Andre Przywara
2023-10-19 23:51 ` Samuel Holland
2023-10-21 23:27 ` Andre Przywara
2023-10-22 3:34 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 02/22] net: sunxi_emac: chase DT nodes to find PHY regulator Andre Przywara
2023-10-20 0:01 ` Samuel Holland
2023-10-21 23:33 ` Andre Przywara
2023-09-28 21:54 ` [PATCH v2 03/22] sunxi: remove CONFIG_MACPWR Andre Przywara
2023-10-21 4:35 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 04/22] pinctrl: sunxi: move pinctrl code Andre Przywara
2023-10-19 0:18 ` Andre Przywara
2023-10-21 8:21 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 05/22] pinctrl: sunxi: add GPIO in/out wrappers Andre Przywara
2023-10-21 8:30 ` Samuel Holland
2023-10-21 23:46 ` Andre Przywara
2023-09-28 21:54 ` [PATCH v2 06/22] pinctrl: sunxi: remove struct sunxi_gpio Andre Przywara
2023-10-21 8:37 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 07/22] pinctrl: sunxi: remove GPIO_EXTRA_HEADER Andre Przywara
2023-10-21 8:57 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 08/22] pinctrl: sunxi: move PIO_BASE into sunxi_gpio.h Andre Przywara
2023-09-28 21:54 ` [PATCH v2 09/22] pinctrl: sunxi: add new D1 pinctrl support Andre Przywara
2023-10-22 3:31 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 10/22] sunxi: introduce NCAT2 generation model Andre Przywara
2023-10-22 3:40 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 11/22] pinctrl: sunxi: add Allwinner D1 pinctrl description Andre Przywara
2023-10-21 4:34 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 12/22] clk: sunxi: Add support for the D1 CCU Andre Przywara
2023-10-19 23:53 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 13/22] sunxi: clock: D1/R528: Enable PLL LDO during PLL1 setup Andre Przywara
2023-09-28 21:54 ` Andre Przywara [this message]
2023-09-28 21:54 ` [PATCH v2 15/22] Kconfig: sunxi: prepare for using drivers/ram/sunxi Andre Przywara
2023-10-22 3:44 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 16/22] sunxi: add R528/T113-s3/D1(s) DRAM initialisation code Andre Przywara
2023-10-22 3:52 ` Samuel Holland
2023-10-22 22:40 ` Andre Przywara
2023-10-23 2:58 ` Samuel Holland
2023-09-28 21:54 ` [PATCH v2 17/22] sunxi: add Allwinner R528/T113 SoC support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 18/22] sunxi: R528: add SMHC2 pin pull ups support Andre Przywara
2023-09-28 21:54 ` [PATCH v2 19/22] sunxi: refactor serial base addresses to avoid asm/arch/cpu.h Andre Przywara
2023-09-28 21:54 ` [PATCH v2 20/22] riscv: dts: allwinner: Add the D1/D1s SoC devicetree Andre Przywara
2023-09-28 21:54 ` [PATCH v2 21/22] ARM: dts: sunxi: add Allwinner T113-s SoC .dtsi Andre Przywara
2023-09-28 21:54 ` [PATCH v2 22/22] sunxi: add MangoPi MQ-R board support Andre Przywara
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230928215455.28094-15-andre.przywara@arm.com \
--to=andre.przywara@arm.com \
--cc=andre.przywara@foss.arm.com \
--cc=bigunclemax@gmail.com \
--cc=cfsworks@gmail.com \
--cc=jagan@amarulasolutions.com \
--cc=jernej.skrabec@gmail.com \
--cc=linux-sunxi@lists.linux.dev \
--cc=okhunjon72@gmail.com \
--cc=samuel@sholland.org \
--cc=u-boot@lists.denx.de \
--cc=uwu@icenowy.me \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.