[PATCH v4 0/2] arm64: dts: ti: k3-j7200: Fixes for various dtbs_checks warnings

[PATCH v4 0/2] arm64: dts: ti: k3-j7200: Fixes for various dtbs_checks warnings

[Vaishnav Achath]

Hi,

Few fixups for j7200 dtbs_check warnings.

This is V4 for the following series rebased and tested with 6.6-rc5,

V3 : https://lore.kernel.org/all/20230513101343.785-1-vaishnav.a@ti.com
V2 : https://lore.kernel.org/all/20230505115858.7391-1-vaishnav.a@ti.com/
V1 : https://lore.kernel.org/all/20230424173623.477577-1-nm@ti.com/

Bootlog with basic hyperflash testing (6.6.0-rc5-next-20231009):
https://gist.github.com/vaishnavachath/f7265e932725fd992dbc4e48b993e9c0

Patch 2/2 depends on the following patch under review which enables reg-mux
to be used when parent node is not syscon :
https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

Changelog:

V3->V4:
  * Rebase and tested with 6.6-rc5

V2->V3:
  * Drop pinctrl fix patch as the fix [2]  is already merged to next.
  * Keep register regions unchanged as it is correct according to memory
  map, update commit message.

V1->V2:
 * Address feedback as recommended in [3].
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes in [4] to simplify the hbmc-mux modelling   

[1] https://lore.kernel.org/all/76da0b98-3274-b047-db11-ecabc117ae11@ti.com/
[2] https://lore.kernel.org/all/20230510091850.28881-1-tony@atomide.com/
[3] https://lore.kernel.org/all/20230503115130.c7m4a7crub7kmfjw@gluten/
[4] https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

Nishanth Menon (2):
  arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to
    ti,j721e-system-controller
  arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 0/2] arm64: dts: ti: k3-j7200: Fixes for various dtbs_checks warnings

[Vaishnav Achath]

Hi,

Few fixups for j7200 dtbs_check warnings.

This is V4 for the following series rebased and tested with 6.6-rc5,

V3 : https://lore.kernel.org/all/20230513101343.785-1-vaishnav.a@ti.com
V2 : https://lore.kernel.org/all/20230505115858.7391-1-vaishnav.a@ti.com/
V1 : https://lore.kernel.org/all/20230424173623.477577-1-nm@ti.com/

Bootlog with basic hyperflash testing (6.6.0-rc5-next-20231009):
https://gist.github.com/vaishnavachath/f7265e932725fd992dbc4e48b993e9c0

Patch 2/2 depends on the following patch under review which enables reg-mux
to be used when parent node is not syscon :
https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

Changelog:

V3->V4:
  * Rebase and tested with 6.6-rc5

V2->V3:
  * Drop pinctrl fix patch as the fix [2]  is already merged to next.
  * Keep register regions unchanged as it is correct according to memory
  map, update commit message.

V1->V2:
 * Address feedback as recommended in [3].
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes in [4] to simplify the hbmc-mux modelling   

[1] https://lore.kernel.org/all/76da0b98-3274-b047-db11-ecabc117ae11@ti.com/
[2] https://lore.kernel.org/all/20230510091850.28881-1-tony@atomide.com/
[3] https://lore.kernel.org/all/20230503115130.c7m4a7crub7kmfjw@gluten/
[4] https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

Nishanth Menon (2):
  arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to
    ti,j721e-system-controller
  arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

-- 
2.17.1

[PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[Vaishnav Achath]

From: Nishanth Menon <nm@ti.com>

Use ti,j721e-system-controller to be explicit about the syscon node we
are using.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

No changes since V1.

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6ffaf85fa63f..2ee6215e38a6 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -165,7 +165,7 @@
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
 		reg = <0x00 0x40f00000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[Vaishnav Achath]

From: Nishanth Menon <nm@ti.com>

Use ti,j721e-system-controller to be explicit about the syscon node we
are using.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

No changes since V1.

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 6ffaf85fa63f..2ee6215e38a6 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -165,7 +165,7 @@
 	};
 
 	mcu_conf: syscon@40f00000 {
-		compatible = "syscon", "simple-mfd";
+		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
 		reg = <0x00 0x40f00000 0x00 0x20000>;
 		#address-cells = <1>;
 		#size-cells = <1>;
-- 
2.17.1

Re: [PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[reidt]

On 13:54-20231009, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>  arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>  	};
>  
>  	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
>  		reg = <0x00 0x40f00000 0x00 0x20000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -- 
> 2.17.1
> 
>

Reviewed-by: Reid tonking <reidt@ti.com>


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[reidt]

On 13:54-20231009, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>  arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>  	};
>  
>  	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
>  		reg = <0x00 0x40f00000 0x00 0x20000>;
>  		#address-cells = <1>;
>  		#size-cells = <1>;
> -- 
> 2.17.1
> 
>

Reviewed-by: Reid tonking <reidt@ti.com>

Re: [PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[Andrew Davis]

On 10/9/23 3:24 AM, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>   arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>   	};
>   
>   	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";

There is already a "ti,j721e-system-controller" in the main domain dtsi. And this
is not one of those. You are hiding a valid DT warning by adding an incorrect
compatible string that just so happens to not throw the warning.

This should be a "simple-bus" node.

Andrew

>   		reg = <0x00 0x40f00000 0x00 0x20000>;
>   		#address-cells = <1>;
>   		#size-cells = <1>;

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 1/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Switch mcu_syscon to ti,j721e-system-controller

[Andrew Davis]

On 10/9/23 3:24 AM, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> Use ti,j721e-system-controller to be explicit about the syscon node we
> are using.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> No changes since V1.
> 
>   arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 6ffaf85fa63f..2ee6215e38a6 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -165,7 +165,7 @@
>   	};
>   
>   	mcu_conf: syscon@40f00000 {
> -		compatible = "syscon", "simple-mfd";
> +		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";

There is already a "ti,j721e-system-controller" in the main domain dtsi. And this
is not one of those. You are hiding a valid DT warning by adding an incorrect
compatible string that just so happens to not throw the warning.

This should be a "simple-bus" node.

Andrew

>   		reg = <0x00 0x40f00000 0x00 0x20000>;
>   		#address-cells = <1>;
>   		#size-cells = <1>;

[PATCH v4 2/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

[Vaishnav Achath]

From: Nishanth Menon <nm@ti.com>

FSS node claims to be a syscon node, while it actually is a simple bus
where OSPI, HBMC peripherals are located and a mux for path select
between OSPI and Hyperbus which can be modelled as a reg-mux. So model
it accordingly and use reg-mux to describe the hbmc_mux.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

V2->V3:
 * Keep register regions unchanged as it is correct according to memory
  map.
 * Update commit messages as per Vignesh's suggestion.

V1->V2:
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes to simplify the hbmc-mux modelling.
 * Update commit message to reflect changes.

Depends on:
 https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 2ee6215e38a6..4f98ea685d33 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -507,15 +507,16 @@
 		status = "disabled";
 	};
 
-	fss: syscon@47000000 {
-		compatible = "syscon", "simple-mfd";
+	fss: bus@47000000 {
+		compatible = "simple-bus";
 		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x2>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4 0x2>; /* HBMC select */
 		};
-- 
2.17.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v4 2/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

[Vaishnav Achath]

From: Nishanth Menon <nm@ti.com>

FSS node claims to be a syscon node, while it actually is a simple bus
where OSPI, HBMC peripherals are located and a mux for path select
between OSPI and Hyperbus which can be modelled as a reg-mux. So model
it accordingly and use reg-mux to describe the hbmc_mux.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
---

V2->V3:
 * Keep register regions unchanged as it is correct according to memory
  map.
 * Update commit messages as per Vignesh's suggestion.

V1->V2:
 * Address feedback from Udit to limit the FSS register region size as
 per TRM.
 * Use reg-mux changes to simplify the hbmc-mux modelling.
 * Update commit message to reflect changes.

Depends on:
 https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/

 arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 2ee6215e38a6..4f98ea685d33 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -507,15 +507,16 @@
 		status = "disabled";
 	};
 
-	fss: syscon@47000000 {
-		compatible = "syscon", "simple-mfd";
+	fss: bus@47000000 {
+		compatible = "simple-bus";
 		reg = <0x00 0x47000000 0x00 0x100>;
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		hbmc_mux: hbmc-mux {
-			compatible = "mmio-mux";
+		hbmc_mux: mux-controller@47000004 {
+			compatible = "reg-mux";
+			reg = <0x00 0x47000004 0x00 0x2>;
 			#mux-control-cells = <1>;
 			mux-reg-masks = <0x4 0x2>; /* HBMC select */
 		};
-- 
2.17.1

Re: [PATCH v4 2/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

[reidt]

On 13:54-20231009, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> FSS node claims to be a syscon node, while it actually is a simple bus
> where OSPI, HBMC peripherals are located and a mux for path select
> between OSPI and Hyperbus which can be modelled as a reg-mux. So model
> it accordingly and use reg-mux to describe the hbmc_mux.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> V2->V3:
>  * Keep register regions unchanged as it is correct according to memory
>   map.
>  * Update commit messages as per Vignesh's suggestion.
> 
> V1->V2:
>  * Address feedback from Udit to limit the FSS register region size as
>  per TRM.
>  * Use reg-mux changes to simplify the hbmc-mux modelling.
>  * Update commit message to reflect changes.
> 
> Depends on:
>  https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/
> 
>  arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 2ee6215e38a6..4f98ea685d33 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -507,15 +507,16 @@
>  		status = "disabled";
>  	};
>  
> -	fss: syscon@47000000 {
> -		compatible = "syscon", "simple-mfd";
> +	fss: bus@47000000 {
> +		compatible = "simple-bus";
>  		reg = <0x00 0x47000000 0x00 0x100>;
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
>  
> -		hbmc_mux: hbmc-mux {
> -			compatible = "mmio-mux";
> +		hbmc_mux: mux-controller@47000004 {
> +			compatible = "reg-mux";
> +			reg = <0x00 0x47000004 0x00 0x2>;
>  			#mux-control-cells = <1>;
>  			mux-reg-masks = <0x4 0x2>; /* HBMC select */
>  		};
> -- 
> 2.17.1
> 
> 

Reviewed-by: Reid Tonking <reidt@ti.com>

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v4 2/2] arm64: dts: ti: k3-j7200-mcu-wakeup: Update fss node and hbmc_mux

[reidt]

On 13:54-20231009, Vaishnav Achath wrote:
> From: Nishanth Menon <nm@ti.com>
> 
> FSS node claims to be a syscon node, while it actually is a simple bus
> where OSPI, HBMC peripherals are located and a mux for path select
> between OSPI and Hyperbus which can be modelled as a reg-mux. So model
> it accordingly and use reg-mux to describe the hbmc_mux.
> 
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
> ---
> 
> V2->V3:
>  * Keep register regions unchanged as it is correct according to memory
>   map.
>  * Update commit messages as per Vignesh's suggestion.
> 
> V1->V2:
>  * Address feedback from Udit to limit the FSS register region size as
>  per TRM.
>  * Use reg-mux changes to simplify the hbmc-mux modelling.
>  * Update commit message to reflect changes.
> 
> Depends on:
>  https://lore.kernel.org/all/20230911151030.71100-1-afd@ti.com/
> 
>  arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> index 2ee6215e38a6..4f98ea685d33 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
> @@ -507,15 +507,16 @@
>  		status = "disabled";
>  	};
>  
> -	fss: syscon@47000000 {
> -		compatible = "syscon", "simple-mfd";
> +	fss: bus@47000000 {
> +		compatible = "simple-bus";
>  		reg = <0x00 0x47000000 0x00 0x100>;
>  		#address-cells = <2>;
>  		#size-cells = <2>;
>  		ranges;
>  
> -		hbmc_mux: hbmc-mux {
> -			compatible = "mmio-mux";
> +		hbmc_mux: mux-controller@47000004 {
> +			compatible = "reg-mux";
> +			reg = <0x00 0x47000004 0x00 0x2>;
>  			#mux-control-cells = <1>;
>  			mux-reg-masks = <0x4 0x2>; /* HBMC select */
>  		};
> -- 
> 2.17.1
> 
> 

Reviewed-by: Reid Tonking <reidt@ti.com>