All of lore.kernel.org
 help / color / mirror / Atom feed
From: Florian Fainelli <florian.fainelli@broadcom.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <florian.fainelli@broadcom.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Broadcom internal kernel review list
	<bcm-kernel-feedback-list@broadcom.com>,
	linux-kernel@vger.kernel.org (open list:ARM/Mediatek SoC support),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Mediatek SoC support)
Subject: [PATCH net-next v2 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
Date: Wed, 11 Oct 2023 15:20:26 -0700	[thread overview]
Message-ID: <20231011222026.4181654-3-florian.fainelli@broadcom.com> (raw)
In-Reply-To: <20231011222026.4181654-1-florian.fainelli@broadcom.com>


[-- Attachment #1.1: Type: text/plain, Size: 3687 bytes --]

This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 Documentation/networking/dsa/configuration.rst |  4 ++--
 include/uapi/linux/if_link.h                   |  4 +++-
 net/dsa/netlink.c                              | 10 +++++-----
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst
index a5a38c31736d..7148fb7c7fe1 100644
--- a/Documentation/networking/dsa/configuration.rst
+++ b/Documentation/networking/dsa/configuration.rst
@@ -393,7 +393,7 @@ description which has an ``ethernet`` property. It is up to the user to
 configure the system for the switch to use other conduits.
 
 DSA uses the ``rtnl_link_ops`` mechanism (with a "dsa" ``kind``) to allow
-changing the DSA conduit of a user port. The ``IFLA_DSA_MASTER`` u32 netlink
+changing the DSA conduit of a user port. The ``IFLA_DSA_CONDUIT`` u32 netlink
 attribute contains the ifindex of the conduit device that handles each user
 device. The DSA conduit must be a valid candidate based on firmware node
 information, or a LAG interface which contains only users which are valid
@@ -435,7 +435,7 @@ Using iproute2, the following manipulations are possible:
         dsa master bond0
 
 Notice that in the case of CPU ports under a LAG, the use of the
-``IFLA_DSA_MASTER`` netlink attribute is not strictly needed, but rather, DSA
+``IFLA_DSA_CONDUIT`` netlink attribute is not strictly needed, but rather, DSA
 reacts to the ``IFLA_MASTER`` attribute change of its present conduit (``eth0``)
 and migrates all user ports to the new upper of ``eth0``, ``bond0``. Similarly,
 when ``bond0`` is destroyed using ``RTM_DELLINK``, DSA migrates the user ports
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index fac351a93aed..30ef80aff033 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -1392,7 +1392,9 @@ enum {
 
 enum {
 	IFLA_DSA_UNSPEC,
-	IFLA_DSA_MASTER,
+	IFLA_DSA_CONDUIT,
+	/* Deprecated, use IFLA_DSA_CONDUIT insted */
+	IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
 	__IFLA_DSA_MAX,
 };
 
diff --git a/net/dsa/netlink.c b/net/dsa/netlink.c
index f56f90a25b99..1332e56349e5 100644
--- a/net/dsa/netlink.c
+++ b/net/dsa/netlink.c
@@ -8,7 +8,7 @@
 #include "user.h"
 
 static const struct nla_policy dsa_policy[IFLA_DSA_MAX + 1] = {
-	[IFLA_DSA_MASTER]	= { .type = NLA_U32 },
+	[IFLA_DSA_CONDUIT]	= { .type = NLA_U32 },
 };
 
 static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
@@ -20,8 +20,8 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
 	if (!data)
 		return 0;
 
-	if (data[IFLA_DSA_MASTER]) {
-		u32 ifindex = nla_get_u32(data[IFLA_DSA_MASTER]);
+	if (data[IFLA_DSA_CONDUIT]) {
+		u32 ifindex = nla_get_u32(data[IFLA_DSA_CONDUIT]);
 		struct net_device *conduit;
 
 		conduit = __dev_get_by_index(dev_net(dev), ifindex);
@@ -38,7 +38,7 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
 
 static size_t dsa_get_size(const struct net_device *dev)
 {
-	return nla_total_size(sizeof(u32)) +	/* IFLA_DSA_MASTER  */
+	return nla_total_size(sizeof(u32)) +	/* IFLA_DSA_CONDUIT  */
 	       0;
 }
 
@@ -46,7 +46,7 @@ static int dsa_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 
-	if (nla_put_u32(skb, IFLA_DSA_MASTER, conduit->ifindex))
+	if (nla_put_u32(skb, IFLA_DSA_CONDUIT, conduit->ifindex))
 		return -EMSGSIZE;
 
 	return 0;
-- 
2.34.1


[-- Attachment #1.2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]

[-- Attachment #2: Type: text/plain, Size: 176 bytes --]

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <florian.fainelli@broadcom.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <florian.fainelli@broadcom.com>,
	Andrew Lunn <andrew@lunn.ch>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Broadcom internal kernel review list 
	<bcm-kernel-feedback-list@broadcom.com>,
	linux-kernel@vger.kernel.org (open list:ARM/Mediatek SoC support),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Mediatek SoC support)
Subject: [PATCH net-next v2 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT
Date: Wed, 11 Oct 2023 15:20:26 -0700	[thread overview]
Message-ID: <20231011222026.4181654-3-florian.fainelli@broadcom.com> (raw)
In-Reply-To: <20231011222026.4181654-1-florian.fainelli@broadcom.com>

[-- Attachment #1: Type: text/plain, Size: 3687 bytes --]

This preserves the existing IFLA_DSA_MASTER which is part of the uAPI
and creates an alias named IFLA_DSA_CONDUIT.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
---
 Documentation/networking/dsa/configuration.rst |  4 ++--
 include/uapi/linux/if_link.h                   |  4 +++-
 net/dsa/netlink.c                              | 10 +++++-----
 3 files changed, 10 insertions(+), 8 deletions(-)

diff --git a/Documentation/networking/dsa/configuration.rst b/Documentation/networking/dsa/configuration.rst
index a5a38c31736d..7148fb7c7fe1 100644
--- a/Documentation/networking/dsa/configuration.rst
+++ b/Documentation/networking/dsa/configuration.rst
@@ -393,7 +393,7 @@ description which has an ``ethernet`` property. It is up to the user to
 configure the system for the switch to use other conduits.
 
 DSA uses the ``rtnl_link_ops`` mechanism (with a "dsa" ``kind``) to allow
-changing the DSA conduit of a user port. The ``IFLA_DSA_MASTER`` u32 netlink
+changing the DSA conduit of a user port. The ``IFLA_DSA_CONDUIT`` u32 netlink
 attribute contains the ifindex of the conduit device that handles each user
 device. The DSA conduit must be a valid candidate based on firmware node
 information, or a LAG interface which contains only users which are valid
@@ -435,7 +435,7 @@ Using iproute2, the following manipulations are possible:
         dsa master bond0
 
 Notice that in the case of CPU ports under a LAG, the use of the
-``IFLA_DSA_MASTER`` netlink attribute is not strictly needed, but rather, DSA
+``IFLA_DSA_CONDUIT`` netlink attribute is not strictly needed, but rather, DSA
 reacts to the ``IFLA_MASTER`` attribute change of its present conduit (``eth0``)
 and migrates all user ports to the new upper of ``eth0``, ``bond0``. Similarly,
 when ``bond0`` is destroyed using ``RTM_DELLINK``, DSA migrates the user ports
diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h
index fac351a93aed..30ef80aff033 100644
--- a/include/uapi/linux/if_link.h
+++ b/include/uapi/linux/if_link.h
@@ -1392,7 +1392,9 @@ enum {
 
 enum {
 	IFLA_DSA_UNSPEC,
-	IFLA_DSA_MASTER,
+	IFLA_DSA_CONDUIT,
+	/* Deprecated, use IFLA_DSA_CONDUIT insted */
+	IFLA_DSA_MASTER = IFLA_DSA_CONDUIT,
 	__IFLA_DSA_MAX,
 };
 
diff --git a/net/dsa/netlink.c b/net/dsa/netlink.c
index f56f90a25b99..1332e56349e5 100644
--- a/net/dsa/netlink.c
+++ b/net/dsa/netlink.c
@@ -8,7 +8,7 @@
 #include "user.h"
 
 static const struct nla_policy dsa_policy[IFLA_DSA_MAX + 1] = {
-	[IFLA_DSA_MASTER]	= { .type = NLA_U32 },
+	[IFLA_DSA_CONDUIT]	= { .type = NLA_U32 },
 };
 
 static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
@@ -20,8 +20,8 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
 	if (!data)
 		return 0;
 
-	if (data[IFLA_DSA_MASTER]) {
-		u32 ifindex = nla_get_u32(data[IFLA_DSA_MASTER]);
+	if (data[IFLA_DSA_CONDUIT]) {
+		u32 ifindex = nla_get_u32(data[IFLA_DSA_CONDUIT]);
 		struct net_device *conduit;
 
 		conduit = __dev_get_by_index(dev_net(dev), ifindex);
@@ -38,7 +38,7 @@ static int dsa_changelink(struct net_device *dev, struct nlattr *tb[],
 
 static size_t dsa_get_size(const struct net_device *dev)
 {
-	return nla_total_size(sizeof(u32)) +	/* IFLA_DSA_MASTER  */
+	return nla_total_size(sizeof(u32)) +	/* IFLA_DSA_CONDUIT  */
 	       0;
 }
 
@@ -46,7 +46,7 @@ static int dsa_fill_info(struct sk_buff *skb, const struct net_device *dev)
 {
 	struct net_device *conduit = dsa_user_to_conduit(dev);
 
-	if (nla_put_u32(skb, IFLA_DSA_MASTER, conduit->ifindex))
+	if (nla_put_u32(skb, IFLA_DSA_CONDUIT, conduit->ifindex))
 		return -EMSGSIZE;
 
 	return 0;
-- 
2.34.1


[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4221 bytes --]

  parent reply	other threads:[~2023-10-11 22:21 UTC|newest]

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-10-11 22:20 [PATCH net-next v2 0/2] Switch DSA to inclusive terminology Florian Fainelli
2023-10-11 22:20 ` Florian Fainelli
2023-10-11 22:20 ` [PATCH net-next v2 1/2] net: dsa: Use conduit and user terms Florian Fainelli
2023-10-11 22:20   ` Florian Fainelli
2023-10-12 21:23   ` Andrew Lunn
2023-10-12 21:23     ` Andrew Lunn
2023-10-12 23:10   ` Vladimir Oltean
2023-10-12 23:10     ` Vladimir Oltean
2023-10-13  2:27     ` Stephen Hemminger
2023-10-13  2:27       ` Stephen Hemminger
2023-10-13 16:25     ` Stephen Hemminger
2023-10-13 16:25       ` Stephen Hemminger
2023-10-13 16:27       ` Florian Fainelli
2023-10-13 16:27         ` Florian Fainelli
2023-10-23  7:12   ` Pavel Machek
2023-10-23  7:12     ` Pavel Machek
2023-10-23 15:50     ` Florian Fainelli
2023-10-23 15:50       ` Florian Fainelli
2023-10-23 19:32     ` Vladimir Oltean
2023-10-23 19:32       ` Vladimir Oltean
2023-10-11 22:20 ` Florian Fainelli [this message]
2023-10-11 22:20   ` [PATCH net-next v2 2/2] net: dsa: Rename IFLA_DSA_MASTER to IFLA_DSA_CONDUIT Florian Fainelli
2023-10-11 23:30   ` Stephen Hemminger
2023-10-11 23:30     ` Stephen Hemminger
2023-10-12 23:13     ` Vladimir Oltean
2023-10-12 23:13       ` Vladimir Oltean
2023-10-13  2:30       ` Stephen Hemminger
2023-10-13  2:30         ` Stephen Hemminger
2023-10-11 23:22 ` [PATCH net-next v2 0/2] Switch DSA to inclusive terminology Stephen Hemminger
2023-10-11 23:22   ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231011222026.4181654-3-florian.fainelli@broadcom.com \
    --to=florian.fainelli@broadcom.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.