From: Juergen Gross <jgross@suse.com>
To: xen-devel@lists.xenproject.org
Cc: javi.merino@cloud.com, "Juergen Gross" <jgross@suse.com>,
"Jan Beulich" <jbeulich@suse.com>,
"Andrew Cooper" <andrew.cooper3@citrix.com>,
"Roger Pau Monné" <roger.pau@citrix.com>, "Wei Liu" <wl@xen.org>,
"George Dunlap" <george.dunlap@citrix.com>,
"Julien Grall" <julien@xen.org>,
"Stefano Stabellini" <sstabellini@kernel.org>
Subject: [PATCH v2 06/13] xen/spinlock: add rspin_[un]lock_irq[save|restore]()
Date: Fri, 13 Oct 2023 11:42:17 +0200 [thread overview]
Message-ID: <20231013094224.7060-7-jgross@suse.com> (raw)
In-Reply-To: <20231013094224.7060-1-jgross@suse.com>
Instead of special casing rspin_lock_irqsave() and
rspin_unlock_irqrestore() for the console lock, add those functions
to spinlock handling and use them where needed.
Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- new patch
---
xen/arch/x86/traps.c | 14 ++++++++------
xen/common/spinlock.c | 16 ++++++++++++++++
xen/drivers/char/console.c | 18 +-----------------
xen/include/xen/console.h | 5 +++--
xen/include/xen/spinlock.h | 7 +++++++
5 files changed, 35 insertions(+), 25 deletions(-)
diff --git a/xen/arch/x86/traps.c b/xen/arch/x86/traps.c
index e1356f696a..f72769e79b 100644
--- a/xen/arch/x86/traps.c
+++ b/xen/arch/x86/traps.c
@@ -647,13 +647,15 @@ void show_stack_overflow(unsigned int cpu, const struct cpu_user_regs *regs)
void show_execution_state(const struct cpu_user_regs *regs)
{
/* Prevent interleaving of output. */
- unsigned long flags = console_lock_recursive_irqsave();
+ unsigned long flags;
+
+ rspin_lock_irqsave(&console_lock, flags);
show_registers(regs);
show_code(regs);
show_stack(regs);
- console_unlock_recursive_irqrestore(flags);
+ rspin_unlock_irqrestore(&console_lock, flags);
}
void cf_check show_execution_state_nonconst(struct cpu_user_regs *regs)
@@ -663,7 +665,7 @@ void cf_check show_execution_state_nonconst(struct cpu_user_regs *regs)
void vcpu_show_execution_state(struct vcpu *v)
{
- unsigned long flags = 0;
+ unsigned long flags;
if ( test_bit(_VPF_down, &v->pause_flags) )
{
@@ -698,7 +700,7 @@ void vcpu_show_execution_state(struct vcpu *v)
#endif
/* Prevent interleaving of output. */
- flags = console_lock_recursive_irqsave();
+ rspin_lock_irqsave(&console_lock, flags);
vcpu_show_registers(v);
@@ -708,7 +710,7 @@ void vcpu_show_execution_state(struct vcpu *v)
* Stop interleaving prevention: The necessary P2M lookups involve
* locking, which has to occur with IRQs enabled.
*/
- console_unlock_recursive_irqrestore(flags);
+ rspin_unlock_irqrestore(&console_lock, flags);
show_hvm_stack(v, &v->arch.user_regs);
}
@@ -717,7 +719,7 @@ void vcpu_show_execution_state(struct vcpu *v)
if ( guest_kernel_mode(v, &v->arch.user_regs) )
show_guest_stack(v, &v->arch.user_regs);
- console_unlock_recursive_irqrestore(flags);
+ rspin_unlock_irqrestore(&console_lock, flags);
}
#ifdef CONFIG_HVM
diff --git a/xen/common/spinlock.c b/xen/common/spinlock.c
index 58d19ea12c..3b1d1fd8d5 100644
--- a/xen/common/spinlock.c
+++ b/xen/common/spinlock.c
@@ -475,6 +475,16 @@ void rspin_lock(rspinlock_t *lock)
lock->recurse_cnt++;
}
+unsigned long __rspin_lock_irqsave(rspinlock_t *lock)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ rspin_lock(lock);
+
+ return flags;
+}
+
void rspin_unlock(rspinlock_t *lock)
{
if ( likely(--lock->recurse_cnt == 0) )
@@ -484,6 +494,12 @@ void rspin_unlock(rspinlock_t *lock)
}
}
+void rspin_unlock_irqrestore(rspinlock_t *lock, unsigned long flags)
+{
+ rspin_unlock(lock);
+ local_irq_restore(flags);
+}
+
#ifdef CONFIG_DEBUG_LOCK_PROFILE
struct lock_profile_anc {
diff --git a/xen/drivers/char/console.c b/xen/drivers/char/console.c
index 394c01d097..360c2afbf3 100644
--- a/xen/drivers/char/console.c
+++ b/xen/drivers/char/console.c
@@ -120,7 +120,7 @@ static int __read_mostly sercon_handle = -1;
int8_t __read_mostly opt_console_xen; /* console=xen */
#endif
-static DEFINE_RSPINLOCK(console_lock);
+DEFINE_RSPINLOCK(console_lock);
/*
* To control the amount of printing, thresholds are added.
@@ -1149,22 +1149,6 @@ void console_end_log_everything(void)
atomic_dec(&print_everything);
}
-unsigned long console_lock_recursive_irqsave(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- rspin_lock(&console_lock);
-
- return flags;
-}
-
-void console_unlock_recursive_irqrestore(unsigned long flags)
-{
- rspin_unlock(&console_lock);
- local_irq_restore(flags);
-}
-
void console_force_unlock(void)
{
watchdog_disable();
diff --git a/xen/include/xen/console.h b/xen/include/xen/console.h
index ab5c30c0da..dff0096b27 100644
--- a/xen/include/xen/console.h
+++ b/xen/include/xen/console.h
@@ -8,8 +8,11 @@
#define __CONSOLE_H__
#include <xen/inttypes.h>
+#include <xen/spinlock.h>
#include <public/xen.h>
+extern rspinlock_t console_lock;
+
struct xen_sysctl_readconsole;
long read_console_ring(struct xen_sysctl_readconsole *op);
@@ -20,8 +23,6 @@ void console_init_postirq(void);
void console_endboot(void);
int console_has(const char *device);
-unsigned long console_lock_recursive_irqsave(void);
-void console_unlock_recursive_irqrestore(unsigned long flags);
void console_force_unlock(void);
void console_start_sync(void);
diff --git a/xen/include/xen/spinlock.h b/xen/include/xen/spinlock.h
index c99ee52458..53f0f72ac4 100644
--- a/xen/include/xen/spinlock.h
+++ b/xen/include/xen/spinlock.h
@@ -218,7 +218,14 @@ void _spin_barrier(spinlock_t *lock);
*/
int rspin_trylock(rspinlock_t *lock);
void rspin_lock(rspinlock_t *lock);
+#define rspin_lock_irqsave(l, f) \
+ ({ \
+ BUILD_BUG_ON(sizeof(f) != sizeof(unsigned long)); \
+ ((f) = __rspin_lock_irqsave(l)); \
+ })
+unsigned long __rspin_lock_irqsave(rspinlock_t *lock);
void rspin_unlock(rspinlock_t *lock);
+void rspin_unlock_irqrestore(rspinlock_t *lock, unsigned long flags);
#define spin_lock(l) _spin_lock(l)
#define spin_lock_cb(l, c, d) _spin_lock_cb(l, c, d)
--
2.35.3
next prev parent reply other threads:[~2023-10-13 10:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-10-13 9:42 [PATCH v2 00/13] xen/spinlock: make recursive spinlocks a dedicated type Juergen Gross
2023-10-13 9:42 ` [PATCH v2 01/13] xen/spinlock: fix coding style issues Juergen Gross
2023-10-18 15:47 ` Jan Beulich
2023-10-18 15:52 ` Juergen Gross
2023-10-13 9:42 ` [PATCH v2 02/13] xen/spinlock: reduce lock profile ifdefs Juergen Gross
2023-10-18 15:57 ` Jan Beulich
2023-10-19 9:05 ` Juergen Gross
2023-10-13 9:42 ` [PATCH v2 03/13] xen/spinlock: make spinlock initializers more readable Juergen Gross
2023-10-18 16:00 ` Jan Beulich
2023-10-13 9:42 ` [PATCH v2 04/13] xen/spinlock: introduce new type for recursive spinlocks Juergen Gross
2023-10-13 9:42 ` [PATCH v2 05/13] xen/spinlock: rename recursive lock functions Juergen Gross
2023-10-13 9:42 ` Juergen Gross [this message]
2023-10-13 9:42 ` [PATCH v2 07/13] xen/spinlock: make struct lock_profile rspinlock_t aware Juergen Gross
2023-10-13 9:42 ` [PATCH v2 08/13] xen/spinlock: add explicit non-recursive locking functions Juergen Gross
2023-10-13 9:42 ` [PATCH v2 09/13] xen/spinlock: add another function level Juergen Gross
2023-10-13 9:42 ` [PATCH v2 10/13] xen/spinlock: add missing rspin_is_locked() and rspin_barrier() Juergen Gross
2023-10-13 9:42 ` [PATCH v2 11/13] xen/spinlock: split recursive spinlocks from normal ones Juergen Gross
2023-10-13 9:42 ` [PATCH v2 12/13] xen/spinlock: remove indirection through macros for spin_*() functions Juergen Gross
2023-10-13 9:42 ` [PATCH v2 13/13] xen/spinlock: support higher number of cpus Juergen Gross
2023-10-19 7:48 ` [PATCH v2 00/13] xen/spinlock: make recursive spinlocks a dedicated type Jan Beulich
2023-10-19 9:35 ` Andrew Cooper
2023-10-19 9:39 ` Jan Beulich
2023-10-19 11:05 ` Andrew Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231013094224.7060-7-jgross@suse.com \
--to=jgross@suse.com \
--cc=andrew.cooper3@citrix.com \
--cc=george.dunlap@citrix.com \
--cc=javi.merino@cloud.com \
--cc=jbeulich@suse.com \
--cc=julien@xen.org \
--cc=roger.pau@citrix.com \
--cc=sstabellini@kernel.org \
--cc=wl@xen.org \
--cc=xen-devel@lists.xenproject.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.