* [PATCH v3 1/7] dt-bindings: arm: add cznic,turris-omnia-mcu binding
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 14:31 ` [PATCH v3 2/7] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
` (5 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij
Cc: Marek Behún, Krzysztof Kozlowski
Add binding for cznic,turris-omnia-mcu, the device-tree node
representing the system-controller features provided by the MCU on the
Turris Omnia router.
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
.../bindings/arm/cznic,turris-omnia-mcu.yaml | 67 +++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
diff --git a/Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml b/Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
new file mode 100644
index 000000000000..ea1fd0117bb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/cznic,turris-omnia-mcu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia MCU
+
+maintainers:
+ - Marek Behún <kabel@kernel.org>
+
+description:
+ The MCU on Turris Omnia acts as a system controller providing additional
+ GPIOs, interrupts, watchdog, system power off and wakeup configuration.
+
+properties:
+ compatible:
+ const: cznic,turris-omnia-mcu
+
+ reg:
+ description: MCU I2C slave address
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-controller
+ - gpio-controller
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ system-controller@2a {
+ compatible = "cznic,turris-omnia-mcu";
+ reg = <0x2a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_NONE>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index 2894f0777537..56cb540bb4ef 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2102,6 +2102,7 @@ W: https://www.turris.cz/
F: Documentation/ABI/testing/debugfs-moxtet
F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
+F: Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
F: Documentation/devicetree/bindings/bus/moxtet.txt
F: Documentation/devicetree/bindings/firmware/cznic,turris-mox-rwtm.txt
F: Documentation/devicetree/bindings/gpio/gpio-moxtet.txt
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 2/7] platform: cznic: Add preliminary support for Turris Omnia MCU
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
2023-10-23 14:31 ` [PATCH v3 1/7] dt-bindings: arm: add cznic,turris-omnia-mcu binding Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 14:31 ` [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Marek Behún
` (4 subsequent siblings)
6 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij, Bartosz Golaszewski, linux-gpio, Alessandro Zummo,
Alexandre Belloni, linux-rtc, Wim Van Sebroeck, Guenter Roeck,
linux-watchdog
Cc: Marek Behún
Add the basic skeleton for a new platform driver for the microcontroller
found on the Turris Omnia board.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 45 ++++
MAINTAINERS | 3 +
drivers/platform/Kconfig | 2 +
drivers/platform/Makefile | 1 +
drivers/platform/cznic/Kconfig | 26 ++
drivers/platform/cznic/Makefile | 4 +
.../platform/cznic/turris-omnia-mcu-base.c | 253 ++++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 65 +++++
include/linux/turris-omnia-mcu-interface.h | 194 ++++++++++++++
9 files changed, 593 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
create mode 100644 drivers/platform/cznic/Kconfig
create mode 100644 drivers/platform/cznic/Makefile
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-base.c
create mode 100644 drivers/platform/cznic/turris-omnia-mcu.h
create mode 100644 include/linux/turris-omnia-mcu-interface.h
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
new file mode 100644
index 000000000000..72cdf0cfce3e
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -0,0 +1,45 @@
+What: /sys/bus/i2c/devices/<mcu_device>/fw_features
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Newer versions of the microcontroller firmware report the
+ features they support. These can be read from this file. If the
+ MCU firmware is too old, this file reads 0x0.
+
+ Format: 0x%x.
+
+What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_application
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the version hash (commit hash) of the application
+ part of the microcontroller firmware.
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/fw_version_hash_bootloader
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the version hash (commit hash) of the bootloader
+ part of the microcontroller firmware.
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/mcu_type
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the microcontroller type (STM32, GD32, MKL).
+
+ Format: %s.
+
+What: /sys/bus/i2c/devices/<mcu_device>/reset_selector
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RO) Contains the selected factory reset level, determined by
+ how long the rear reset button was held by the user during board
+ reset.
+
+ Format: %i.
diff --git a/MAINTAINERS b/MAINTAINERS
index 56cb540bb4ef..8dab94d51c47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -2100,6 +2100,7 @@ M: Marek Behún <kabel@kernel.org>
S: Maintained
W: https://www.turris.cz/
F: Documentation/ABI/testing/debugfs-moxtet
+F: Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
F: Documentation/ABI/testing/sysfs-bus-moxtet-devices
F: Documentation/ABI/testing/sysfs-firmware-turris-mox-rwtm
F: Documentation/devicetree/bindings/arm/cznic,turris-omnia-mcu.yaml
@@ -2113,10 +2114,12 @@ F: drivers/firmware/turris-mox-rwtm.c
F: drivers/gpio/gpio-moxtet.c
F: drivers/leds/leds-turris-omnia.c
F: drivers/mailbox/armada-37xx-rwtm-mailbox.c
+F: drivers/platform/cznic/
F: drivers/watchdog/armada_37xx_wdt.c
F: include/dt-bindings/bus/moxtet.h
F: include/linux/armada-37xx-rwtm-mailbox.h
F: include/linux/moxtet.h
+F: include/linux/turris-omnia-mcu-interface.h
ARM/FARADAY FA526 PORT
M: Hans Ulli Kroll <ulli.kroll@googlemail.com>
diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
index 868b20361769..fef907a94001 100644
--- a/drivers/platform/Kconfig
+++ b/drivers/platform/Kconfig
@@ -7,6 +7,8 @@ source "drivers/platform/goldfish/Kconfig"
source "drivers/platform/chrome/Kconfig"
+source "drivers/platform/cznic/Kconfig"
+
source "drivers/platform/mellanox/Kconfig"
source "drivers/platform/olpc/Kconfig"
diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
index 41640172975a..8bf189264374 100644
--- a/drivers/platform/Makefile
+++ b/drivers/platform/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_MIPS) += mips/
obj-$(CONFIG_OLPC_EC) += olpc/
obj-$(CONFIG_GOLDFISH) += goldfish/
obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
+obj-$(CONFIG_CZNIC_PLATFORMS) += cznic/
obj-$(CONFIG_SURFACE_PLATFORMS) += surface/
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
new file mode 100644
index 000000000000..f8560ff9c1af
--- /dev/null
+++ b/drivers/platform/cznic/Kconfig
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# For a description of the syntax of this configuration file,
+# see Documentation/kbuild/kconfig-language.rst.
+#
+
+menuconfig CZNIC_PLATFORMS
+ bool "Platform support for CZ.NIC's Turris hardware"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ help
+ Say Y here to be able to choose driver support for CZ.NIC's Turris
+ devices. This option alone does not add any kernel code.
+
+if CZNIC_PLATFORMS
+
+config TURRIS_OMNIA_MCU
+ tristate "Turris Omnia MCU driver"
+ depends on MACH_ARMADA_38X || COMPILE_TEST
+ depends on I2C
+ help
+ Say Y here to add support for the features implemented by the
+ microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+ To compile this driver as a module, choose M here; the module will be
+ called turris-omnia-mcu.
+
+endif # CZNIC_PLATFORMS
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
new file mode 100644
index 000000000000..4d0a9586538c
--- /dev/null
+++ b/drivers/platform/cznic/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
+turris-omnia-mcu-objs := turris-omnia-mcu-base.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
new file mode 100644
index 000000000000..b0eb29b16383
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/device.h>
+#include <linux/hex.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/sysfs.h>
+
+#include "turris-omnia-mcu.h"
+
+#define OMNIA_FW_VERSION_LEN 20
+#define OMNIA_FW_VERSION_HEX_LEN (2 * OMNIA_FW_VERSION_LEN + 1)
+
+static int omnia_get_version_hash(struct omnia_mcu *mcu, bool bootloader,
+ u8 version[static OMNIA_FW_VERSION_HEX_LEN])
+{
+ u8 reply[OMNIA_FW_VERSION_LEN];
+ int err;
+
+ err = omnia_cmd_read(mcu->client, bootloader ? CMD_GET_FW_VERSION_BOOT :
+ CMD_GET_FW_VERSION_APP,
+ reply, sizeof(reply));
+ if (err)
+ return err;
+
+ version[OMNIA_FW_VERSION_HEX_LEN - 1] = '\0';
+ bin2hex(version, reply, OMNIA_FW_VERSION_LEN);
+
+ return 0;
+}
+
+static ssize_t fw_version_hash_show(struct device *dev, char *buf,
+ bool bootloader)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+ u8 version[OMNIA_FW_VERSION_HEX_LEN];
+ int err;
+
+ err = omnia_get_version_hash(mcu, bootloader, version);
+ if (err)
+ return err;
+
+ return sysfs_emit(buf, "%s\n", version);
+}
+
+static ssize_t fw_version_hash_application_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return fw_version_hash_show(dev, buf, false);
+}
+static DEVICE_ATTR_RO(fw_version_hash_application);
+
+static ssize_t fw_version_hash_bootloader_show(struct device *dev,
+ struct device_attribute *a,
+ char *buf)
+{
+ return fw_version_hash_show(dev, buf, true);
+}
+static DEVICE_ATTR_RO(fw_version_hash_bootloader);
+
+static ssize_t fw_features_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+ return sysfs_emit(buf, "0x%x\n", mcu->features);
+}
+static DEVICE_ATTR_RO(fw_features);
+
+static ssize_t mcu_type_show(struct device *dev, struct device_attribute *a,
+ char *buf)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+ return sysfs_emit(buf, "%s\n", mcu->type);
+}
+static DEVICE_ATTR_RO(mcu_type);
+
+static ssize_t reset_selector_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ int ret;
+
+ ret = omnia_cmd_read_u8(to_i2c_client(dev), CMD_GET_RESET);
+ if (ret < 0)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", ret);
+}
+static DEVICE_ATTR_RO(reset_selector);
+
+static struct attribute *omnia_mcu_attrs[] = {
+ &dev_attr_fw_version_hash_application.attr,
+ &dev_attr_fw_version_hash_bootloader.attr,
+ &dev_attr_fw_features.attr,
+ &dev_attr_mcu_type.attr,
+ &dev_attr_reset_selector.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(omnia_mcu);
+
+static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
+{
+ const char *type = bootloader ? "bootloader" : "application";
+ struct device *dev = &mcu->client->dev;
+ u8 version[OMNIA_FW_VERSION_HEX_LEN];
+ int err;
+
+ err = omnia_get_version_hash(mcu, bootloader, version);
+ if (err) {
+ dev_err(dev, "Cannot read MCU %s firmware version: %d\n", type,
+ err);
+ return;
+ }
+
+ dev_info(dev, "MCU %s firmware version hash: %s\n", type, version);
+}
+
+static const char *omnia_status_to_mcu_type(uint16_t status)
+{
+ switch (status & STS_MCU_TYPE_MASK) {
+ case STS_MCU_TYPE_STM32:
+ return "STM32";
+ case STS_MCU_TYPE_GD32:
+ return "GD32";
+ case STS_MCU_TYPE_MKL:
+ return "MKL";
+ default:
+ return "unknown";
+ }
+}
+
+static void omnia_info_missing_feature(struct device *dev, const char *feature)
+{
+ dev_info(dev,
+ "Your board's MCU firmware does not support the %s feature.\n",
+ feature);
+}
+
+static int omnia_mcu_read_features(struct omnia_mcu *mcu)
+{
+ static const struct {
+ uint16_t mask;
+ const char *name;
+ } features[] = {
+ { FEAT_EXT_CMDS, "extended control and status" },
+ { FEAT_WDT_PING, "watchdog pinging" },
+ { FEAT_LED_STATE_EXT_MASK, "peripheral LED pins reading" },
+ { FEAT_NEW_INT_API, "new interrupt API" },
+ { FEAT_POWEROFF_WAKEUP, "poweroff and wakeup" },
+ };
+ struct device *dev = &mcu->client->dev;
+ bool suggest_fw_upgrade = false;
+ int status;
+
+ /* status word holds MCU type, which we need below */
+ status = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD);
+ if (status < 0)
+ return status;
+
+ /* check whether MCU firmware supports the CMD_GET_FEAUTRES command */
+ if (status & STS_FEATURES_SUPPORTED) {
+ int features;
+
+ features = omnia_cmd_read_u16(mcu->client, CMD_GET_FEATURES);
+ if (features < 0)
+ return features;
+
+ mcu->features = features;
+ } else {
+ omnia_info_missing_feature(dev, "feature reading");
+ suggest_fw_upgrade = true;
+ }
+
+ mcu->type = omnia_status_to_mcu_type(status);
+ dev_info(dev, "MCU type %s%s\n", mcu->type,
+ (mcu->features & FEAT_PERIPH_MCU) ?
+ ", with peripheral resets wired" : "");
+
+ omnia_mcu_print_version_hash(mcu, true);
+
+ if (mcu->features & FEAT_BOOTLOADER)
+ dev_warn(dev,
+ "MCU is running bootloader firmware. Was firmware upgrade interrupted?\n");
+ else
+ omnia_mcu_print_version_hash(mcu, false);
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(features); i++) {
+ if (mcu->features & features[i].mask)
+ continue;
+
+ omnia_info_missing_feature(dev, features[i].name);
+ suggest_fw_upgrade = true;
+ }
+
+ if (suggest_fw_upgrade)
+ dev_info(dev,
+ "Consider upgrading MCU firmware with the omnia-mcutool utility.\n");
+
+ return 0;
+}
+
+static int omnia_mcu_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
+ struct omnia_mcu *mcu;
+ int err;
+
+ if (!client->irq)
+ return dev_err_probe(dev, -EINVAL, "IRQ resource not found\n");
+
+ mcu = devm_kzalloc(dev, sizeof(*mcu), GFP_KERNEL);
+ if (!mcu)
+ return -ENOMEM;
+
+ mcu->client = client;
+ i2c_set_clientdata(client, mcu);
+
+ err = omnia_mcu_read_features(mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot determine MCU supported features\n");
+
+ return 0;
+}
+
+static const struct of_device_id of_omnia_mcu_match[] = {
+ { .compatible = "cznic,turris-omnia-mcu" },
+ {}
+};
+
+static struct i2c_driver omnia_mcu_driver = {
+ .probe = omnia_mcu_probe,
+ .driver = {
+ .name = "turris-omnia-mcu",
+ .of_match_table = of_omnia_mcu_match,
+ .dev_groups = omnia_mcu_groups,
+ },
+};
+
+module_i2c_driver(omnia_mcu_driver);
+
+MODULE_AUTHOR("Marek Behun <kabel@kernel.org>");
+MODULE_DESCRIPTION("CZ.NIC's Turris Omnia MCU");
+MODULE_LICENSE("GPL");
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
new file mode 100644
index 000000000000..ee7c7cf34243
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -0,0 +1,65 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_H
+#define __TURRIS_OMNIA_MCU_H
+
+#include <linux/i2c.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+struct omnia_mcu {
+ struct i2c_client *client;
+ const char *type;
+ u16 features;
+};
+
+static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
+ unsigned int len)
+{
+ struct i2c_msg msgs[2];
+ int ret;
+
+ msgs[0].addr = client->addr;
+ msgs[0].flags = 0;
+ msgs[0].len = 1;
+ msgs[0].buf = &cmd;
+ msgs[1].addr = client->addr;
+ msgs[1].flags = I2C_M_RD;
+ msgs[1].len = len;
+ msgs[1].buf = reply;
+
+ ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+ if (ret != ARRAY_SIZE(msgs))
+ return -EIO;
+
+ return 0;
+}
+
+static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
+{
+ u16 reply;
+ int err;
+
+ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+ return err ?: le16_to_cpu(reply);
+}
+
+static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
+{
+ u8 reply;
+ int err;
+
+ err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
+
+ return err ?: reply;
+}
+
+#endif /* __TURRIS_OMNIA_MCU_H */
diff --git a/include/linux/turris-omnia-mcu-interface.h b/include/linux/turris-omnia-mcu-interface.h
new file mode 100644
index 000000000000..1d426f8c209e
--- /dev/null
+++ b/include/linux/turris-omnia-mcu-interface.h
@@ -0,0 +1,194 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * CZ.NIC's Turris Omnia MCU I2C interface commands definitions
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#ifndef __TURRIS_OMNIA_MCU_INTERFACE_H
+#define __TURRIS_OMNIA_MCU_INTERFACE_H
+
+#include <linux/bits.h>
+
+enum omnia_commands_e {
+ CMD_GET_STATUS_WORD = 0x01, /* slave sends status word back */
+ CMD_GENERAL_CONTROL = 0x02,
+ CMD_LED_MODE = 0x03, /* default/user */
+ CMD_LED_STATE = 0x04, /* LED on/off */
+ CMD_LED_COLOR = 0x05, /* LED number + RED + GREEN + BLUE */
+ CMD_USER_VOLTAGE = 0x06,
+ CMD_SET_BRIGHTNESS = 0x07,
+ CMD_GET_BRIGHTNESS = 0x08,
+ CMD_GET_RESET = 0x09,
+ CMD_GET_FW_VERSION_APP = 0x0A, /* 20B git hash number */
+ CMD_SET_WATCHDOG_STATE = 0x0B, /* 0 - disable
+ * 1 - enable / ping
+ * after boot watchdog is started
+ * with 2 minutes timeout
+ */
+
+ /* CMD_WATCHDOG_STATUS = 0x0C, not implemented anymore */
+
+ CMD_GET_WATCHDOG_STATE = 0x0D,
+ CMD_GET_FW_VERSION_BOOT = 0x0E, /* 20B git hash number */
+ CMD_GET_FW_CHECKSUM = 0x0F, /* 4B length, 4B checksum */
+
+ /* available if FEATURES_SUPPORTED bit set in status word */
+ CMD_GET_FEATURES = 0x10,
+
+ /* available if EXT_CMD bit set in features */
+ CMD_GET_EXT_STATUS_DWORD = 0x11,
+ CMD_EXT_CONTROL = 0x12,
+ CMD_GET_EXT_CONTROL_STATUS = 0x13,
+
+ /* available if NEW_INT_API bit set in features */
+ CMD_GET_INT_AND_CLEAR = 0x14,
+ CMD_GET_INT_MASK = 0x15,
+ CMD_SET_INT_MASK = 0x16,
+
+ /* available if FLASHING bit set in features */
+ CMD_FLASH = 0x19,
+
+ /* available if WDT_PING bit set in features */
+ CMD_SET_WDT_TIMEOUT = 0x20,
+ CMD_GET_WDT_TIMELEFT = 0x21,
+
+ /* available if POWEROFF_WAKEUP bit set in features */
+ CMD_SET_WAKEUP = 0x22,
+ CMD_GET_UPTIME_AND_WAKEUP = 0x23,
+ CMD_POWER_OFF = 0x24,
+
+ /* available only at address 0x2b (led-controller) */
+ /* available only if LED_GAMMA_CORRECTION bit set in features */
+ CMD_SET_GAMMA_CORRECTION = 0x30,
+ CMD_GET_GAMMA_CORRECTION = 0x31,
+};
+
+enum omnia_flashing_commands_e {
+ FLASH_CMD_UNLOCK = 0x01,
+ FLASH_CMD_SIZE_AND_CSUM = 0x02,
+ FLASH_CMD_PROGRAM = 0x03,
+ FLASH_CMD_RESET = 0x04,
+};
+
+enum omnia_sts_word_e {
+ STS_MCU_TYPE_MASK = GENMASK(1, 0),
+ STS_MCU_TYPE_STM32 = 0 << 0,
+ STS_MCU_TYPE_GD32 = 1 << 0,
+ STS_MCU_TYPE_MKL = 2 << 0,
+ STS_FEATURES_SUPPORTED = BIT(2),
+ STS_USER_REGULATOR_NOT_SUPPORTED = BIT(3),
+ STS_CARD_DET = BIT(4),
+ STS_MSATA_IND = BIT(5),
+ STS_USB30_OVC = BIT(6),
+ STS_USB31_OVC = BIT(7),
+ STS_USB30_PWRON = BIT(8),
+ STS_USB31_PWRON = BIT(9),
+ STS_ENABLE_4V5 = BIT(10),
+ STS_BUTTON_MODE = BIT(11),
+ STS_BUTTON_PRESSED = BIT(12),
+ STS_BUTTON_COUNTER_MASK = GENMASK(15, 13)
+};
+
+enum omnia_ctl_byte_e {
+ CTL_LIGHT_RST = BIT(0),
+ CTL_HARD_RST = BIT(1),
+ /* BIT(2) is currently reserved */
+ CTL_USB30_PWRON = BIT(3),
+ CTL_USB31_PWRON = BIT(4),
+ CTL_ENABLE_4V5 = BIT(5),
+ CTL_BUTTON_MODE = BIT(6),
+ CTL_BOOTLOADER = BIT(7)
+};
+
+enum omnia_features_e {
+ FEAT_PERIPH_MCU = BIT(0),
+ FEAT_EXT_CMDS = BIT(1),
+ FEAT_WDT_PING = BIT(2),
+ FEAT_LED_STATE_EXT_MASK = GENMASK(4, 3),
+ FEAT_LED_STATE_EXT = 1 << 3,
+ FEAT_LED_STATE_EXT_V32 = 2 << 3,
+ FEAT_LED_GAMMA_CORRECTION = BIT(5),
+ FEAT_NEW_INT_API = BIT(6),
+ FEAT_BOOTLOADER = BIT(7),
+ FEAT_FLASHING = BIT(8),
+ FEAT_NEW_MESSAGE_API = BIT(9),
+ FEAT_BRIGHTNESS_INT = BIT(10),
+ FEAT_POWEROFF_WAKEUP = BIT(11),
+};
+
+enum omnia_ext_sts_dword_e {
+ EXT_STS_SFP_nDET = BIT(0),
+ EXT_STS_LED_STATES_MASK = GENMASK(31, 12),
+ EXT_STS_WLAN0_MSATA_LED = BIT(12),
+ EXT_STS_WLAN1_LED = BIT(13),
+ EXT_STS_WLAN2_LED = BIT(14),
+ EXT_STS_WPAN0_LED = BIT(15),
+ EXT_STS_WPAN1_LED = BIT(16),
+ EXT_STS_WPAN2_LED = BIT(17),
+ EXT_STS_WAN_LED0 = BIT(18),
+ EXT_STS_WAN_LED1 = BIT(19),
+ EXT_STS_LAN0_LED0 = BIT(20),
+ EXT_STS_LAN0_LED1 = BIT(21),
+ EXT_STS_LAN1_LED0 = BIT(22),
+ EXT_STS_LAN1_LED1 = BIT(23),
+ EXT_STS_LAN2_LED0 = BIT(24),
+ EXT_STS_LAN2_LED1 = BIT(25),
+ EXT_STS_LAN3_LED0 = BIT(26),
+ EXT_STS_LAN3_LED1 = BIT(27),
+ EXT_STS_LAN4_LED0 = BIT(28),
+ EXT_STS_LAN4_LED1 = BIT(29),
+ EXT_STS_LAN5_LED0 = BIT(30),
+ EXT_STS_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_ext_ctl_e {
+ EXT_CTL_nRES_MMC = BIT(0),
+ EXT_CTL_nRES_LAN = BIT(1),
+ EXT_CTL_nRES_PHY = BIT(2),
+ EXT_CTL_nPERST0 = BIT(3),
+ EXT_CTL_nPERST1 = BIT(4),
+ EXT_CTL_nPERST2 = BIT(5),
+ EXT_CTL_PHY_SFP = BIT(6),
+ EXT_CTL_PHY_SFP_AUTO = BIT(7),
+ EXT_CTL_nVHV_CTRL = BIT(8),
+};
+
+enum omnia_int_e {
+ INT_CARD_DET = BIT(0),
+ INT_MSATA_IND = BIT(1),
+ INT_USB30_OVC = BIT(2),
+ INT_USB31_OVC = BIT(3),
+ INT_BUTTON_PRESSED = BIT(4),
+ INT_SFP_nDET = BIT(5),
+ INT_BRIGHTNESS_CHANGED = BIT(6),
+
+ INT_LED_STATES_MASK = GENMASK(31, 12),
+ INT_WLAN0_MSATA_LED = BIT(12),
+ INT_WLAN1_LED = BIT(13),
+ INT_WLAN2_LED = BIT(14),
+ INT_WPAN0_LED = BIT(15),
+ INT_WPAN1_LED = BIT(16),
+ INT_WPAN2_LED = BIT(17),
+ INT_WAN_LED0 = BIT(18),
+ INT_WAN_LED1 = BIT(19),
+ INT_LAN0_LED0 = BIT(20),
+ INT_LAN0_LED1 = BIT(21),
+ INT_LAN1_LED0 = BIT(22),
+ INT_LAN1_LED1 = BIT(23),
+ INT_LAN2_LED0 = BIT(24),
+ INT_LAN2_LED1 = BIT(25),
+ INT_LAN3_LED0 = BIT(26),
+ INT_LAN3_LED1 = BIT(27),
+ INT_LAN4_LED0 = BIT(28),
+ INT_LAN4_LED1 = BIT(29),
+ INT_LAN5_LED0 = BIT(30),
+ INT_LAN5_LED1 = BIT(31),
+};
+
+enum omnia_cmd_poweroff_e {
+ CMD_POWER_OFF_POWERON_BUTTON = BIT(0),
+ CMD_POWER_OFF_MAGIC = 0xdead,
+};
+
+#endif /* __TURRIS_OMNIA_MCU_INTERFACE_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
2023-10-23 14:31 ` [PATCH v3 1/7] dt-bindings: arm: add cznic,turris-omnia-mcu binding Marek Behún
2023-10-23 14:31 ` [PATCH v3 2/7] platform: cznic: Add preliminary support for Turris Omnia MCU Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 20:04 ` Andy Shevchenko
2023-10-23 14:31 ` [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
` (3 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij, Bartosz Golaszewski, linux-gpio
Cc: Marek Behún
Add support for GPIOs connected to the MCU on the Turris Omnia board.
This includes:
- front button pin
- enable pins for USB regulators
- MiniPCIe / mSATA card presence pins in MiniPCIe port 0
- LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
- on board revisions 32+ also various peripheral resets and another
voltage regulator enable pin
Signed-off-by: Marek Behún <kabel@kernel.org>
---
Changes since v2:
- addressed most of Andy's and Linus' suggestions:
- for interleaving / deinterleaving the bytes in interrupt mask
Andy suggested using his proposed bitmap_gather() and bitmap_scatter()
(from https://lore.kernel.org/linux-gpio/20230926052007.3917389-3-andriy.shevchenko@linux.intel.com/)
Since from the conversation there it seems that there maybe isn't
enough consensus yet, for now I've decided to introduce functions
omnia_mask_interleave() and omnia_mask_deinterleave(). These are more
specific for this driver. Once there is consensus for the proposed
bitmap functions, we can change it in this driver
- Andy suggested using devm_delayed_work_autocancel(), but I cannot use
it directly because of a quirk specific for this driver: the order
of IRQ and work request and remove must be:
INIT_DELAYED_WORK()
request_threaded_irq()
...
cancel_delayed_work_sync()
free_irq()
But using
devm_delayed_work_autocancel()
devm_request_threaded_irq()
would cause improper remove order:
free_irq()
cancel_delayed_work_sync()
I've solved this by doing:
INIT_DELAYED_WORK()
devm_request_threaded_irq()
devm_add_action(..., devm_delayed_work_drop, ...)
and commented this in the code
---
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 +
drivers/platform/cznic/Kconfig | 15 +
drivers/platform/cznic/Makefile | 1 +
.../platform/cznic/turris-omnia-mcu-base.c | 13 +-
.../platform/cznic/turris-omnia-mcu-gpio.c | 1021 +++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 61 +-
6 files changed, 1124 insertions(+), 3 deletions(-)
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-gpio.c
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
index 72cdf0cfce3e..e635ba45ef9a 100644
--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -1,3 +1,19 @@
+What: /sys/bus/i2c/devices/<mcu_device>/front_button_mode
+Date: November 2023
+KernelVersion: 6.7
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RW) The front button on the Turris Omnia router can be
+ configured either to change the intensity of all the LEDs on the
+ front panel, or to send the press event to the CPU as an
+ interrupt.
+
+ This file switches between these two modes:
+ - "mcu" makes the button press event be handled by the MCU to
+ change the LEDs panel intensity.
+ - "cpu" makes the button press event be handled by the CPU.
+
+ Format: %s.
+
What: /sys/bus/i2c/devices/<mcu_device>/fw_features
Date: November 2023
KernelVersion: 6.7
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index f8560ff9c1af..3a8c3edcd7e6 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -17,9 +17,24 @@ config TURRIS_OMNIA_MCU
tristate "Turris Omnia MCU driver"
depends on MACH_ARMADA_38X || COMPILE_TEST
depends on I2C
+ select GPIOLIB
+ select GPIOLIB_IRQCHIP
help
Say Y here to add support for the features implemented by the
microcontroller on the CZ.NIC's Turris Omnia SOHO router.
+ The features include:
+ - GPIO pins
+ - to get front button press events (the front button can be
+ configured either to generate press events to the CPU or to change
+ front LEDs panel brightness)
+ - to enable / disable USB port voltage regulators and to detect
+ USB overcurrent
+ - to detect MiniPCIe / mSATA card presence in MiniPCIe port 0
+ - to configure resets of various peripherals on board revisions 32+
+ - to enable / disable the VHV voltage regulator to the SOC in order
+ to be able to program SOC's OTP on board revisions 32+
+ - to get input from the LED output pins of the WAN ethernet PHY, LAN
+ switch and MiniPCIe ports
To compile this driver as a module, choose M here; the module will be
called turris-omnia-mcu.
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index 4d0a9586538c..a6177f5b4fff 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -2,3 +2,4 @@
obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
turris-omnia-mcu-objs := turris-omnia-mcu-base.o
+turris-omnia-mcu-objs += turris-omnia-mcu-gpio.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index b0eb29b16383..912058694d77 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -105,7 +105,16 @@ static struct attribute *omnia_mcu_attrs[] = {
&dev_attr_reset_selector.attr,
NULL
};
-ATTRIBUTE_GROUPS(omnia_mcu);
+
+static const struct attribute_group omnia_mcu_base_group = {
+ .attrs = omnia_mcu_attrs,
+};
+
+static const struct attribute_group *omnia_mcu_groups[] = {
+ &omnia_mcu_base_group,
+ &omnia_mcu_gpio_group,
+ NULL
+};
static void omnia_mcu_print_version_hash(struct omnia_mcu *mcu, bool bootloader)
{
@@ -229,7 +238,7 @@ static int omnia_mcu_probe(struct i2c_client *client)
return dev_err_probe(dev, err,
"Cannot determine MCU supported features\n");
- return 0;
+ return omnia_mcu_register_gpiochip(mcu);
}
static const struct of_device_id of_omnia_mcu_match[] = {
diff --git a/drivers/platform/cznic/turris-omnia-mcu-gpio.c b/drivers/platform/cznic/turris-omnia-mcu-gpio.c
new file mode 100644
index 000000000000..0424539deccc
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-gpio.c
@@ -0,0 +1,1021 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU GPIO and IRQ driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/bug.h>
+#include <linux/cleanup.h>
+#include <linux/devm-helpers.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mutex.h>
+#include <linux/sysfs.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/workqueue.h>
+#include <asm/unaligned.h>
+
+#include "turris-omnia-mcu.h"
+
+#define CMD_INT_ARG_LEN 8
+#define FRONT_BUTTON_RELEASE_DELAY 50 /* ms */
+
+static const char * const omnia_mcu_gpio_templates[64] = {
+ /* GPIOs with value read from the 16-bit wide status */
+ [4] = "gpio%u.MiniPCIe0 Card Detect",
+ [5] = "gpio%u.MiniPCIe0 mSATA Indicator",
+ [6] = "gpio%u.Front USB3 port over-current",
+ [7] = "gpio%u.Rear USB3 port over-current",
+ [8] = "gpio%u.Front USB3 port power",
+ [9] = "gpio%u.Rear USB3 port power",
+ [12] = "gpio%u.Front Button",
+
+ /* GPIOs with value read from the 32-bit wide extended status */
+ [16] = "gpio%u.SFP nDET",
+ [28] = "gpio%u.MiniPCIe0 LED",
+ [29] = "gpio%u.MiniPCIe1 LED",
+ [30] = "gpio%u.MiniPCIe2 LED",
+ [31] = "gpio%u.MiniPCIe0 PAN LED",
+ [32] = "gpio%u.MiniPCIe1 PAN LED",
+ [33] = "gpio%u.MiniPCIe2 PAN LED",
+ [34] = "gpio%u.WAN PHY LED0",
+ [35] = "gpio%u.WAN PHY LED1",
+ [36] = "gpio%u.LAN switch p0 LED0",
+ [37] = "gpio%u.LAN switch p0 LED1",
+ [38] = "gpio%u.LAN switch p1 LED0",
+ [39] = "gpio%u.LAN switch p1 LED1",
+ [40] = "gpio%u.LAN switch p2 LED0",
+ [41] = "gpio%u.LAN switch p2 LED1",
+ [42] = "gpio%u.LAN switch p3 LED0",
+ [43] = "gpio%u.LAN switch p3 LED1",
+ [44] = "gpio%u.LAN switch p4 LED0",
+ [45] = "gpio%u.LAN switch p4 LED1",
+ [46] = "gpio%u.LAN switch p5 LED0",
+ [47] = "gpio%u.LAN switch p5 LED1",
+
+ /* GPIOs with value read from the 16-bit wide extended control status */
+ [48] = "gpio%u.eMMC nRESET",
+ [49] = "gpio%u.LAN switch nRESET",
+ [50] = "gpio%u.WAN PHY nRESET",
+ [51] = "gpio%u.MiniPCIe0 nPERST",
+ [52] = "gpio%u.MiniPCIe1 nPERST",
+ [53] = "gpio%u.MiniPCIe2 nPERST",
+ [54] = "gpio%u.WAN PHY SFP mux",
+};
+
+#define _DEF_GPIO(_cmd, _ctl_cmd, _bit, _ctl_bit, _int_bit, _feat, _feat_mask) \
+ { \
+ .cmd = _cmd, \
+ .ctl_cmd = _ctl_cmd, \
+ .bit = _bit, \
+ .ctl_bit = _ctl_bit, \
+ .int_bit = _int_bit, \
+ .feat = _feat, \
+ .feat_mask = _feat_mask, \
+ }
+#define _DEF_GPIO_STS(_name) \
+ _DEF_GPIO(CMD_GET_STATUS_WORD, 0, STS_ ## _name, 0, INT_ ## _name, 0, 0)
+#define _DEF_GPIO_CTL(_name) \
+ _DEF_GPIO(CMD_GET_STATUS_WORD, CMD_GENERAL_CONTROL, STS_ ## _name, \
+ CTL_ ## _name, 0, 0, 0)
+#define _DEF_GPIO_EXT_STS(_name, _feat) \
+ _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \
+ INT_ ## _name, FEAT_ ## _feat | FEAT_EXT_CMDS, \
+ FEAT_ ## _feat | FEAT_EXT_CMDS)
+#define _DEF_GPIO_EXT_STS_LED(_name, _ledext) \
+ _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \
+ INT_ ## _name, FEAT_LED_STATE_ ## _ledext, \
+ FEAT_LED_STATE_EXT_MASK)
+#define _DEF_GPIO_EXT_STS_LEDALL(_name) \
+ _DEF_GPIO(CMD_GET_EXT_STATUS_DWORD, 0, EXT_STS_ ## _name, 0, \
+ INT_ ## _name, FEAT_LED_STATE_EXT_MASK, 0)
+#define _DEF_GPIO_EXT_CTL(_name, _feat) \
+ _DEF_GPIO(CMD_GET_EXT_CONTROL_STATUS, CMD_EXT_CONTROL, \
+ EXT_CTL_ ## _name, EXT_CTL_ ## _name, 0, \
+ FEAT_ ## _feat | FEAT_EXT_CMDS, \
+ FEAT_ ## _feat | FEAT_EXT_CMDS)
+#define _DEF_INT(_name) \
+ _DEF_GPIO(0, 0, 0, 0, INT_ ## _name, 0, 0)
+
+static const struct omnia_gpio {
+ u8 cmd, ctl_cmd;
+ u32 bit, ctl_bit;
+ u32 int_bit;
+ u16 feat, feat_mask;
+} omnia_gpios[64] = {
+ /* GPIOs with value read from the 16-bit wide status */
+ [4] = _DEF_GPIO_STS(CARD_DET),
+ [5] = _DEF_GPIO_STS(MSATA_IND),
+ [6] = _DEF_GPIO_STS(USB30_OVC),
+ [7] = _DEF_GPIO_STS(USB31_OVC),
+ [8] = _DEF_GPIO_CTL(USB30_PWRON),
+ [9] = _DEF_GPIO_CTL(USB31_PWRON),
+
+ /* brightness changed interrupt, no GPIO */
+ [11] = _DEF_INT(BRIGHTNESS_CHANGED),
+
+ [12] = _DEF_GPIO_STS(BUTTON_PRESSED),
+
+ /* GPIOs with value read from the 32-bit wide extended status */
+ [16] = _DEF_GPIO_EXT_STS(SFP_nDET, PERIPH_MCU),
+ [28] = _DEF_GPIO_EXT_STS_LEDALL(WLAN0_MSATA_LED),
+ [29] = _DEF_GPIO_EXT_STS_LEDALL(WLAN1_LED),
+ [30] = _DEF_GPIO_EXT_STS_LEDALL(WLAN2_LED),
+ [31] = _DEF_GPIO_EXT_STS_LED(WPAN0_LED, EXT),
+ [32] = _DEF_GPIO_EXT_STS_LED(WPAN1_LED, EXT),
+ [33] = _DEF_GPIO_EXT_STS_LED(WPAN2_LED, EXT),
+ [34] = _DEF_GPIO_EXT_STS_LEDALL(WAN_LED0),
+ [35] = _DEF_GPIO_EXT_STS_LED(WAN_LED1, EXT_V32),
+ [36] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED0),
+ [37] = _DEF_GPIO_EXT_STS_LEDALL(LAN0_LED1),
+ [38] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED0),
+ [39] = _DEF_GPIO_EXT_STS_LEDALL(LAN1_LED1),
+ [40] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED0),
+ [41] = _DEF_GPIO_EXT_STS_LEDALL(LAN2_LED1),
+ [42] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED0),
+ [43] = _DEF_GPIO_EXT_STS_LEDALL(LAN3_LED1),
+ [44] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED0),
+ [45] = _DEF_GPIO_EXT_STS_LEDALL(LAN4_LED1),
+ [46] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED0),
+ [47] = _DEF_GPIO_EXT_STS_LEDALL(LAN5_LED1),
+
+ /* GPIOs with value read from the 16-bit wide extended control status */
+ [48] = _DEF_GPIO_EXT_CTL(nRES_MMC, PERIPH_MCU),
+ [49] = _DEF_GPIO_EXT_CTL(nRES_LAN, PERIPH_MCU),
+ [50] = _DEF_GPIO_EXT_CTL(nRES_PHY, PERIPH_MCU),
+ [51] = _DEF_GPIO_EXT_CTL(nPERST0, PERIPH_MCU),
+ [52] = _DEF_GPIO_EXT_CTL(nPERST1, PERIPH_MCU),
+ [53] = _DEF_GPIO_EXT_CTL(nPERST2, PERIPH_MCU),
+ [54] = _DEF_GPIO_EXT_CTL(PHY_SFP, PERIPH_MCU),
+};
+
+/* mapping from interrupts to indexes of GPIOs in the omnia_gpios array */
+static const u8 omnia_int_to_gpio_idx[32] = {
+ [__bf_shf(INT_CARD_DET)] = 4,
+ [__bf_shf(INT_MSATA_IND)] = 5,
+ [__bf_shf(INT_USB30_OVC)] = 6,
+ [__bf_shf(INT_USB31_OVC)] = 7,
+ [__bf_shf(INT_BUTTON_PRESSED)] = 12,
+ [__bf_shf(INT_SFP_nDET)] = 16,
+ [__bf_shf(INT_BRIGHTNESS_CHANGED)] = 11,
+ [__bf_shf(INT_WLAN0_MSATA_LED)] = 28,
+ [__bf_shf(INT_WLAN1_LED)] = 29,
+ [__bf_shf(INT_WLAN2_LED)] = 30,
+ [__bf_shf(INT_WPAN0_LED)] = 31,
+ [__bf_shf(INT_WPAN1_LED)] = 32,
+ [__bf_shf(INT_WPAN2_LED)] = 33,
+ [__bf_shf(INT_WAN_LED0)] = 34,
+ [__bf_shf(INT_WAN_LED1)] = 35,
+ [__bf_shf(INT_LAN0_LED0)] = 36,
+ [__bf_shf(INT_LAN0_LED1)] = 37,
+ [__bf_shf(INT_LAN1_LED0)] = 38,
+ [__bf_shf(INT_LAN1_LED1)] = 39,
+ [__bf_shf(INT_LAN2_LED0)] = 40,
+ [__bf_shf(INT_LAN2_LED1)] = 41,
+ [__bf_shf(INT_LAN3_LED0)] = 42,
+ [__bf_shf(INT_LAN3_LED1)] = 43,
+ [__bf_shf(INT_LAN4_LED0)] = 44,
+ [__bf_shf(INT_LAN4_LED1)] = 45,
+ [__bf_shf(INT_LAN5_LED0)] = 46,
+ [__bf_shf(INT_LAN5_LED1)] = 47,
+};
+
+/* index of PHY_SFP GPIO in the omnia_gpios array */
+#define OMNIA_GPIO_PHY_SFP_OFFSET 54
+
+static int omnia_ctl_cmd_locked(struct omnia_mcu *mcu, u8 cmd, u16 val,
+ u16 mask)
+{
+ size_t len;
+ u8 buf[5];
+
+ buf[0] = cmd;
+
+ switch (cmd) {
+ case CMD_GENERAL_CONTROL:
+ buf[1] = val;
+ buf[2] = mask;
+ len = 3;
+ break;
+
+ case CMD_EXT_CONTROL:
+ put_unaligned_le16(val, &buf[1]);
+ put_unaligned_le16(mask, &buf[3]);
+ len = 5;
+ break;
+
+ default:
+ BUG();
+ }
+
+ return omnia_cmd_write(mcu->client, buf, len);
+}
+
+static int omnia_ctl_cmd(struct omnia_mcu *mcu, u8 cmd, u16 val, u16 mask)
+{
+ guard(mutex)(&mcu->lock);
+
+ return omnia_ctl_cmd_locked(mcu, cmd, val, mask);
+}
+
+static int omnia_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ if (!omnia_gpios[offset].cmd)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int omnia_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET) {
+ int val;
+
+ scoped_guard(mutex, &mcu->lock)
+ val = omnia_cmd_read_bit(mcu->client,
+ CMD_GET_EXT_CONTROL_STATUS,
+ EXT_CTL_PHY_SFP_AUTO);
+
+ if (val < 0)
+ return val;
+
+ if (val)
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
+ }
+
+ if (omnia_gpios[offset].ctl_cmd)
+ return GPIO_LINE_DIRECTION_OUT;
+
+ return GPIO_LINE_DIRECTION_IN;
+}
+
+static int omnia_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+ const struct omnia_gpio *gpio = &omnia_gpios[offset];
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET)
+ return omnia_ctl_cmd(mcu, CMD_EXT_CONTROL, EXT_CTL_PHY_SFP_AUTO,
+ EXT_CTL_PHY_SFP_AUTO);
+
+ if (gpio->ctl_cmd)
+ return -ENOTSUPP;
+
+ return 0;
+}
+
+static int omnia_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ const struct omnia_gpio *gpio = &omnia_gpios[offset];
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ u16 val, mask;
+
+ if (!gpio->ctl_cmd)
+ return -ENOTSUPP;
+
+ mask = gpio->ctl_bit;
+ val = value ? mask : 0;
+
+ if (offset == OMNIA_GPIO_PHY_SFP_OFFSET)
+ mask |= EXT_CTL_PHY_SFP_AUTO;
+
+ return omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask);
+}
+
+static int omnia_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ const struct omnia_gpio *gpio = &omnia_gpios[offset];
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ /*
+ * If firmware does not support the new interrupt API, we are informed
+ * of every change of the status word by an interrupt from MCU and save
+ * its value in the interrupt service routine. Simply return the saved
+ * value.
+ */
+ if (gpio->cmd == CMD_GET_STATUS_WORD &&
+ !(mcu->features & FEAT_NEW_INT_API))
+ return !!(mcu->last_status & gpio->bit);
+
+ guard(mutex)(&mcu->lock);
+
+ /*
+ * If firmware does support the new interrupt API, we may have cached
+ * the value of a GPIO in the interrupt service routine. If not, read
+ * the relevant bit now.
+ */
+ if (gpio->int_bit && (mcu->is_cached & gpio->int_bit))
+ return !!(mcu->cached & gpio->int_bit);
+
+ return omnia_cmd_read_bit(mcu->client, gpio->cmd, gpio->bit);
+}
+
+static int omnia_gpio_get_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ u32 sts_bits, ext_sts_bits, ext_ctl_bits;
+ int err, i;
+
+ sts_bits = 0;
+ ext_sts_bits = 0;
+ ext_ctl_bits = 0;
+
+ /* determine which bits to read from the 3 possible commands */
+ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
+ if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD)
+ sts_bits |= omnia_gpios[i].bit;
+ else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD)
+ ext_sts_bits |= omnia_gpios[i].bit;
+ else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS)
+ ext_ctl_bits |= omnia_gpios[i].bit;
+ }
+
+ guard(mutex)(&mcu->lock);
+
+ if (mcu->features & FEAT_NEW_INT_API) {
+ /* read relevant bits from status */
+ err = omnia_cmd_read_bits(mcu->client, CMD_GET_STATUS_WORD,
+ sts_bits, &sts_bits);
+ if (err)
+ return err;
+ } else {
+ /*
+ * Use status word value cached in the interrupt service routine
+ * if firmware does not support the new interrupt API.
+ */
+ sts_bits = mcu->last_status;
+ }
+
+ /* read relevant bits from extended status */
+ err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_STATUS_DWORD,
+ ext_sts_bits, &ext_sts_bits);
+ if (err)
+ return err;
+
+ /* read relevant bits from extended control */
+ err = omnia_cmd_read_bits(mcu->client, CMD_GET_EXT_CONTROL_STATUS,
+ ext_ctl_bits, &ext_ctl_bits);
+ if (err)
+ return err;
+
+ /* assign relevant bits in result */
+ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
+ if (omnia_gpios[i].cmd == CMD_GET_STATUS_WORD)
+ __assign_bit(i, bits, sts_bits & omnia_gpios[i].bit);
+ else if (omnia_gpios[i].cmd == CMD_GET_EXT_STATUS_DWORD)
+ __assign_bit(i, bits, ext_sts_bits &
+ omnia_gpios[i].bit);
+ else if (omnia_gpios[i].cmd == CMD_GET_EXT_CONTROL_STATUS)
+ __assign_bit(i, bits, ext_ctl_bits &
+ omnia_gpios[i].bit);
+ }
+
+ return 0;
+}
+
+static void omnia_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+ const struct omnia_gpio *gpio = &omnia_gpios[offset];
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ u16 val, mask;
+
+ if (!gpio->ctl_cmd)
+ return;
+
+ mask = gpio->ctl_bit;
+ val = value ? mask : 0;
+
+ omnia_ctl_cmd(mcu, gpio->ctl_cmd, val, mask);
+}
+
+static void omnia_gpio_set_multiple(struct gpio_chip *gc, unsigned long *mask,
+ unsigned long *bits)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ u16 ext_ctl, ext_ctl_mask;
+ u8 ctl, ctl_mask;
+ int i;
+
+ ctl = 0;
+ ctl_mask = 0;
+ ext_ctl = 0;
+ ext_ctl_mask = 0;
+
+ for_each_set_bit(i, mask, ARRAY_SIZE(omnia_gpios)) {
+ if (omnia_gpios[i].ctl_cmd == CMD_GENERAL_CONTROL) {
+ ctl_mask |= omnia_gpios[i].ctl_bit;
+ if (test_bit(i, bits))
+ ctl |= omnia_gpios[i].ctl_bit;
+ } else if (omnia_gpios[i].ctl_cmd == CMD_EXT_CONTROL) {
+ ext_ctl_mask |= omnia_gpios[i].ctl_bit;
+ if (test_bit(i, bits))
+ ext_ctl |= omnia_gpios[i].ctl_bit;
+ }
+ }
+
+ guard(mutex)(&mcu->lock);
+
+ if (ctl_mask)
+ omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, ctl, ctl_mask);
+
+ if (ext_ctl_mask)
+ omnia_ctl_cmd_locked(mcu, CMD_EXT_CONTROL, ext_ctl,
+ ext_ctl_mask);
+}
+
+static bool omnia_gpio_available(struct omnia_mcu *mcu,
+ const struct omnia_gpio *gpio)
+{
+ if (gpio->feat_mask)
+ return (mcu->features & gpio->feat_mask) == gpio->feat;
+ else if (gpio->feat)
+ return mcu->features & gpio->feat;
+
+ return true;
+}
+
+static int omnia_gpio_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ for (unsigned int i = 0; i < ngpios; i++) {
+ const struct omnia_gpio *gpio = &omnia_gpios[i];
+
+ if (!gpio->cmd && !gpio->int_bit) {
+ __clear_bit(i, valid_mask);
+ continue;
+ }
+
+ __assign_bit(i, valid_mask, omnia_gpio_available(mcu, gpio));
+ }
+
+ return 0;
+}
+
+static void omnia_irq_shutdown(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ u32 bit = omnia_gpios[hwirq].int_bit;
+
+ mcu->rising &= ~bit;
+ mcu->falling &= ~bit;
+}
+
+static void omnia_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ u32 bit = omnia_gpios[hwirq].int_bit;
+
+ if (!omnia_gpios[hwirq].cmd)
+ mcu->rising &= ~bit;
+ mcu->mask &= ~bit;
+ gpiochip_disable_irq(gc, hwirq);
+}
+
+static void omnia_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ u32 bit = omnia_gpios[hwirq].int_bit;
+
+ gpiochip_enable_irq(gc, hwirq);
+ mcu->mask |= bit;
+ if (!omnia_gpios[hwirq].cmd)
+ mcu->rising |= bit;
+}
+
+static int omnia_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ irq_hw_number_t hwirq = irqd_to_hwirq(d);
+ struct device *dev = &mcu->client->dev;
+ u32 bit = omnia_gpios[hwirq].int_bit;
+
+ if (!(type & IRQ_TYPE_EDGE_BOTH)) {
+ dev_err(dev, "irq %u: unsupported type %u\n", d->irq, type);
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_RISING)
+ mcu->rising |= bit;
+ else
+ mcu->rising &= ~bit;
+
+ if (type & IRQ_TYPE_EDGE_FALLING)
+ mcu->falling |= bit;
+ else
+ mcu->falling &= ~bit;
+
+ return 0;
+}
+
+static void omnia_irq_bus_lock(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ /* nothing to do if MCU firmware does not support new interrupt API */
+ if (!(mcu->features & FEAT_NEW_INT_API))
+ return;
+
+ mutex_lock(&mcu->lock);
+}
+
+/**
+ * omnia_mask_interleave - Interleaves the bytes from @rising and @falling
+ * @dst: the destination u8 array of interleaved bytes
+ * @rising: rising mask
+ * @falling: falling mask
+ *
+ * Interleaves the little-endian bytes from @rising and @falling words.
+ *
+ * If @rising = (r0, r1, r2, r3) and @falling = (f0, f1, f2, f3), the result is
+ * @dst = (r0, f0, r1, f1, r2, f2, r3, f3).
+ *
+ * The MCU receives interrupt mask and reports pending interrupt bitmap int this
+ * interleaved format. The rationale behind it is that the low-indexed bits are
+ * more important - in many cases, the user will be interested only in
+ * interrupts with indexes 0 to 7, and so the system can stop reading after
+ * first 2 bytes (r0, f0), to save time on the slow I2C bus.
+ *
+ * Feel free to remove this function and its inverse, omnia_mask_deinterleave,
+ * and use an appropriate bitmap_* function once such a function exists.
+ */
+static void omnia_mask_interleave(u8 *dst, u32 rising, u32 falling)
+{
+ for (int i = 0; i < sizeof(u32); ++i) {
+ dst[2 * i] = rising >> (8 * i);
+ dst[2 * i + 1] = falling >> (8 * i);
+ }
+}
+
+/**
+ * omnia_mask_deinterleave - Deinterleaves the bytes into @rising and @falling
+ * @src: the source u8 array containing the interleaved bytes
+ * @rising: pointer where to store the rising mask gathered from @src
+ * @falling: pointer where to store the falling mask gathered from @src
+ *
+ * This is the inverse function to omnia_mask_interleave.
+ */
+static void omnia_mask_deinterleave(const u8 *src, u32 *rising, u32 *falling)
+{
+ *rising = *falling = 0;
+
+ for (int i = 0; i < sizeof(u32); ++i) {
+ *rising |= src[2 * i] << (8 * i);
+ *falling |= src[2 * i + 1] << (8 * i);
+ }
+}
+
+static void omnia_irq_bus_sync_unlock(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ struct device *dev = &mcu->client->dev;
+ u8 cmd[1 + CMD_INT_ARG_LEN];
+ u32 rising, falling;
+ int err;
+
+ /* nothing to do if MCU firmware does not support new interrupt API */
+ if (!(mcu->features & FEAT_NEW_INT_API))
+ return;
+
+ cmd[0] = CMD_SET_INT_MASK;
+
+ rising = mcu->rising & mcu->mask;
+ falling = mcu->falling & mcu->mask;
+
+ /* interleave the rising and falling bytes into the command arguments */
+ omnia_mask_interleave(&cmd[1], rising, falling);
+
+ dev_dbg(dev, "set int mask %8ph\n", &cmd[1]);
+
+ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+ if (err) {
+ dev_err(dev, "Cannot set mask: %d\n", err);
+ goto unlock;
+ }
+
+ /*
+ * Remember which GPIOs have both rising and falling interrupts enabled.
+ * For those we will cache their value so that .get() method is faster.
+ * We also need to forget cached values of GPIOs that aren't cached
+ * anymore.
+ */
+ mcu->both = rising & falling;
+ mcu->is_cached &= mcu->both;
+
+unlock:
+ mutex_unlock(&mcu->lock);
+}
+
+static const struct irq_chip omnia_mcu_irq_chip = {
+ .name = "Turris Omnia MCU interrupts",
+ .irq_shutdown = omnia_irq_shutdown,
+ .irq_mask = omnia_irq_mask,
+ .irq_unmask = omnia_irq_unmask,
+ .irq_set_type = omnia_irq_set_type,
+ .irq_bus_lock = omnia_irq_bus_lock,
+ .irq_bus_sync_unlock = omnia_irq_bus_sync_unlock,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
+};
+
+static void omnia_irq_init_valid_mask(struct gpio_chip *gc,
+ unsigned long *valid_mask,
+ unsigned int ngpios)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+
+ for (unsigned int i = 0; i < ngpios; i++) {
+ const struct omnia_gpio *gpio = &omnia_gpios[i];
+
+ if (!gpio->int_bit) {
+ __clear_bit(i, valid_mask);
+ continue;
+ }
+
+ __assign_bit(i, valid_mask, omnia_gpio_available(mcu, gpio));
+ }
+}
+
+static int omnia_irq_init_hw(struct gpio_chip *gc)
+{
+ struct omnia_mcu *mcu = gpiochip_get_data(gc);
+ u8 cmd[1 + CMD_INT_ARG_LEN] = {};
+
+ cmd[0] = CMD_SET_INT_MASK;
+
+ return omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+}
+
+/*
+ * Determine how many bytes we need to read from the reply to the
+ * CMD_GET_INT_AND_CLEAR command in order to retrieve all unmasked interrupts.
+ */
+static size_t omnia_irq_compute_pending_length(u32 rising, u32 falling)
+{
+ size_t rlen = 0, flen = 0;
+
+ if (rising)
+ rlen = ((__fls(rising) >> 3) << 1) + 1;
+
+ if (falling)
+ flen = ((__fls(falling) >> 3) << 1) + 2;
+
+ return max(rlen, flen);
+}
+
+static bool omnia_irq_read_pending_new(struct omnia_mcu *mcu,
+ unsigned long *pending)
+{
+ struct device *dev = &mcu->client->dev;
+ u8 reply[CMD_INT_ARG_LEN] = {};
+ u32 rising, falling;
+ size_t len;
+ int err;
+
+ len = omnia_irq_compute_pending_length(mcu->rising & mcu->mask,
+ mcu->falling & mcu->mask);
+ if (!len)
+ return false;
+
+ guard(mutex)(&mcu->lock);
+
+ err = omnia_cmd_read(mcu->client, CMD_GET_INT_AND_CLEAR, reply,
+ len);
+ if (err) {
+ dev_err(dev, "Cannot read pending IRQs: %d\n", err);
+ return false;
+ }
+
+ /* deinterleave the reply bytes into rising and falling */
+ omnia_mask_deinterleave(reply, &rising, &falling);
+
+ rising &= mcu->mask;
+ falling &= mcu->mask;
+ *pending = rising | falling;
+
+ /* cache values for GPIOs that have both edges enabled */
+ mcu->is_cached &= ~(rising & falling);
+ mcu->is_cached |= mcu->both & (rising ^ falling);
+ mcu->cached = (mcu->cached | rising) & ~falling;
+
+ return true;
+}
+
+static int omnia_read_status_word_old_fw(struct omnia_mcu *mcu, u16 *status)
+{
+ int ret;
+
+ ret = omnia_cmd_read_u16(mcu->client, CMD_GET_STATUS_WORD);
+ if (ret < 0)
+ return ret;
+
+ /*
+ * Old firmware has a bug wherein it never resets the USB port
+ * overcurrent bits back to zero. Ignore them.
+ */
+ *status = ret & ~(STS_USB30_OVC | STS_USB31_OVC);
+
+ return 0;
+}
+
+static void button_release_emul_fn(struct work_struct *work)
+{
+ struct omnia_mcu *mcu = container_of(to_delayed_work(work),
+ struct omnia_mcu,
+ button_release_emul_work);
+
+ mcu->button_pressed_emul = false;
+ generic_handle_irq_safe(mcu->client->irq);
+}
+
+static void fill_int_from_sts(u32 *rising, u32 *falling, u16 rising_sts,
+ u16 falling_sts, u16 sts_bit, u32 int_bit)
+{
+ if (rising_sts & sts_bit)
+ *rising |= int_bit;
+ if (falling_sts & sts_bit)
+ *falling |= int_bit;
+}
+
+static bool omnia_irq_read_pending_old(struct omnia_mcu *mcu,
+ unsigned long *pending)
+{
+ struct device *dev = &mcu->client->dev;
+ u16 status, rising_sts, falling_sts;
+ u32 rising, falling;
+ int ret;
+
+ guard(mutex)(&mcu->lock);
+
+ ret = omnia_read_status_word_old_fw(mcu, &status);
+ if (ret < 0) {
+ dev_err(dev, "Cannot read pending IRQs: %d\n", ret);
+ return false;
+ }
+
+ /*
+ * The old firmware triggers an interrupt whenever status word changes,
+ * but does not inform about which bits rose or fell. We need to compute
+ * this here by comparing with the last status word value.
+ *
+ * The STS_BUTTON_PRESSED bit needs special handling, because the old
+ * firmware clears the STS_BUTTON_PRESSED bit on successful completion
+ * of the CMD_GET_STATUS_WORD command, resulting in another interrupt:
+ * - first we get an interrupt, we read the status word where
+ * STS_BUTTON_PRESSED is present,
+ * - MCU clears the STS_BUTTON_PRESSED bit because we read the status
+ * word,
+ * - we get another interrupt because the status word changed again
+ * (STS_BUTTON_PRESSED was cleared).
+ *
+ * The gpiolib-cdev, gpiolib-sysfs and gpio-keys input driver all call
+ * the gpiochip's .get() method after an edge event on a requested GPIO
+ * occurs.
+ *
+ * We ensure that the .get() method reads 1 for the button GPIO for some
+ * time.
+ */
+
+ if (status & STS_BUTTON_PRESSED) {
+ mcu->button_pressed_emul = true;
+ mod_delayed_work(system_wq, &mcu->button_release_emul_work,
+ msecs_to_jiffies(FRONT_BUTTON_RELEASE_DELAY));
+ } else if (mcu->button_pressed_emul) {
+ status |= STS_BUTTON_PRESSED;
+ }
+
+ rising_sts = ~mcu->last_status & status;
+ falling_sts = mcu->last_status & ~status;
+
+ mcu->last_status = status;
+
+ /*
+ * Fill in the relevant interrupt bits from status bits for CARD_DET,
+ * MSATA_IND and BUTTON_PRESSED.
+ */
+ rising = 0;
+ falling = 0;
+ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
+ STS_CARD_DET, INT_CARD_DET);
+ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
+ STS_MSATA_IND, INT_MSATA_IND);
+ fill_int_from_sts(&rising, &falling, rising_sts, falling_sts,
+ STS_BUTTON_PRESSED, INT_BUTTON_PRESSED);
+
+ /* Use only bits that are enabled */
+ rising &= mcu->rising & mcu->mask;
+ falling &= mcu->falling & mcu->mask;
+ *pending = rising | falling;
+
+ return true;
+}
+
+static bool omnia_irq_read_pending(struct omnia_mcu *mcu,
+ unsigned long *pending)
+{
+ if (mcu->features & FEAT_NEW_INT_API)
+ return omnia_irq_read_pending_new(mcu, pending);
+ else
+ return omnia_irq_read_pending_old(mcu, pending);
+}
+
+static irqreturn_t omnia_irq_thread_handler(int irq, void *dev_id)
+{
+ struct omnia_mcu *mcu = dev_id;
+ struct irq_domain *domain;
+ unsigned long pending;
+ int i;
+
+ if (!omnia_irq_read_pending(mcu, &pending))
+ return IRQ_NONE;
+
+ domain = mcu->gc.irq.domain;
+
+ for_each_set_bit(i, &pending, 32) {
+ unsigned int nested_irq;
+
+ nested_irq = irq_find_mapping(domain, omnia_int_to_gpio_idx[i]);
+
+ handle_nested_irq(nested_irq);
+ }
+
+ return IRQ_RETVAL(pending);
+}
+
+static const char * const front_button_modes[2] = { "mcu", "cpu" };
+
+static ssize_t front_button_mode_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+ int val;
+
+ if (mcu->features & FEAT_NEW_INT_API) {
+ val = omnia_cmd_read_bit(mcu->client, CMD_GET_STATUS_WORD,
+ STS_BUTTON_MODE);
+ if (val < 0)
+ return val;
+ } else {
+ val = !!(mcu->last_status & STS_BUTTON_MODE);
+ }
+
+ return sysfs_emit(buf, "%s\n", front_button_modes[val]);
+}
+
+static ssize_t front_button_mode_store(struct device *dev,
+ struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+ u8 mask, val;
+ int err, i;
+
+ mask = CTL_BUTTON_MODE;
+
+ i = sysfs_match_string(front_button_modes, buf);
+ if (i < 0)
+ return i;
+
+ val = i ? mask : 0;
+ err = omnia_ctl_cmd_locked(mcu, CMD_GENERAL_CONTROL, val, mask);
+ if (err)
+ return err;
+
+ return count;
+}
+static DEVICE_ATTR_RW(front_button_mode);
+
+static struct attribute *omnia_mcu_gpio_attrs[] = {
+ &dev_attr_front_button_mode.attr,
+ NULL
+};
+
+const struct attribute_group omnia_mcu_gpio_group = {
+ .attrs = omnia_mcu_gpio_attrs,
+};
+
+static void omnia_mcu_mutex_destroy(void *data)
+{
+ struct mutex *lock = data;
+
+ mutex_destroy(lock);
+}
+
+int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu)
+{
+ bool new_api = mcu->features & FEAT_NEW_INT_API;
+ struct device *dev = &mcu->client->dev;
+ unsigned long irqflags;
+ int err;
+
+ mutex_init(&mcu->lock);
+ err = devm_add_action_or_reset(dev, omnia_mcu_mutex_destroy,
+ &mcu->lock);
+ if (err)
+ return err;
+
+ mcu->gc.request = omnia_gpio_request;
+ mcu->gc.get_direction = omnia_gpio_get_direction;
+ mcu->gc.direction_input = omnia_gpio_direction_input;
+ mcu->gc.direction_output = omnia_gpio_direction_output;
+ mcu->gc.get = omnia_gpio_get;
+ mcu->gc.get_multiple = omnia_gpio_get_multiple;
+ mcu->gc.set = omnia_gpio_set;
+ mcu->gc.set_multiple = omnia_gpio_set_multiple;
+ mcu->gc.init_valid_mask = omnia_gpio_init_valid_mask;
+ mcu->gc.can_sleep = true;
+ mcu->gc.names = omnia_mcu_gpio_templates;
+ mcu->gc.base = -1;
+ mcu->gc.ngpio = ARRAY_SIZE(omnia_gpios);
+ mcu->gc.label = "Turris Omnia MCU GPIOs";
+ mcu->gc.parent = dev;
+ mcu->gc.owner = THIS_MODULE;
+
+ gpio_irq_chip_set_chip(&mcu->gc.irq, &omnia_mcu_irq_chip);
+ /* This will let us handle the parent IRQ in the driver */
+ mcu->gc.irq.parent_handler = NULL;
+ mcu->gc.irq.num_parents = 0;
+ mcu->gc.irq.parents = NULL;
+ mcu->gc.irq.default_type = IRQ_TYPE_NONE;
+ mcu->gc.irq.handler = handle_bad_irq;
+ mcu->gc.irq.threaded = true;
+ if (new_api)
+ mcu->gc.irq.init_hw = omnia_irq_init_hw;
+ mcu->gc.irq.init_valid_mask = omnia_irq_init_valid_mask;
+
+ err = devm_gpiochip_add_data(dev, &mcu->gc, mcu);
+ if (err)
+ return dev_err_probe(dev, err, "Cannot add GPIO chip\n");
+
+ /*
+ * Before requesting the interrupt, if firmware does not support the new
+ * interrupt API, we need to cache the value of the status word, so that
+ * when it changes, we may compare the new value with the cached one in
+ * the interrupt handler.
+ */
+ if (!new_api) {
+ err = omnia_read_status_word_old_fw(mcu, &mcu->last_status);
+ if (err < 0)
+ return dev_err_probe(dev, err,
+ "Cannot read status word\n");
+
+ INIT_DELAYED_WORK(&mcu->button_release_emul_work,
+ button_release_emul_fn);
+ }
+
+ irqflags = IRQF_ONESHOT;
+ if (new_api)
+ irqflags |= IRQF_TRIGGER_LOW;
+ else
+ irqflags |= IRQF_TRIGGER_FALLING;
+
+ err = devm_request_threaded_irq(dev, mcu->client->irq, NULL,
+ omnia_irq_thread_handler, irqflags,
+ "turris-omnia-mcu", mcu);
+ if (err)
+ return dev_err_probe(dev, err, "Cannot request IRQ\n");
+
+ if (!new_api) {
+ /*
+ * The button_release_emul_work has to be initialized before the
+ * thread is requested, and on driver remove it needs to be
+ * canceled before the thread is freed. Therefore we can't use
+ * devm_delayed_work_autocancel() directly, because the order
+ * devm_delayed_work_autocancel();
+ * devm_request_threaded_irq();
+ * would cause improper release order:
+ * free_irq();
+ * cancel_delayed_work_sync();
+ * Instead we first initialize the work above, and only now
+ * after IRQ is requested we add the work devm action.
+ */
+ err = devm_add_action(dev, devm_delayed_work_drop,
+ &mcu->button_release_emul_work);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index ee7c7cf34243..12afc45ed5bc 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -8,16 +8,39 @@
#ifndef __TURRIS_OMNIA_MCU_H
#define __TURRIS_OMNIA_MCU_H
+#include <linux/bitops.h>
+#include <linux/gpio/driver.h>
#include <linux/i2c.h>
+#include <linux/mutex.h>
#include <linux/types.h>
+#include <linux/workqueue.h>
#include <asm/byteorder.h>
struct omnia_mcu {
struct i2c_client *client;
const char *type;
u16 features;
+
+ /* GPIO chip */
+ struct gpio_chip gc;
+ struct mutex lock;
+ u32 mask, rising, falling, both, cached, is_cached;
+ /* Old MCU firmware handling needs the following */
+ struct delayed_work button_release_emul_work;
+ u16 last_status;
+ bool button_pressed_emul;
};
+static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
+ size_t len)
+{
+ int ret;
+
+ ret = i2c_master_send(client, cmd, len);
+
+ return ret < 0 ? ret : 0;
+}
+
static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
unsigned int len)
{
@@ -42,9 +65,41 @@ static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *
return 0;
}
+/* Returns 0 on success */
+static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd,
+ u32 bits, u32 *dst)
+{
+ __le32 reply;
+ int err;
+
+ if (!bits) {
+ *dst = 0;
+ return 0;
+ }
+
+ err = omnia_cmd_read(client, cmd, &reply, (__fls(bits) >> 3) + 1);
+ if (!err)
+ *dst = le32_to_cpu(reply) & bits;
+
+ return err;
+}
+
+static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd,
+ u32 bit)
+{
+ u32 reply;
+ int err;
+
+ err = omnia_cmd_read_bits(client, cmd, bit, &reply);
+ if (err)
+ return err;
+
+ return !!reply;
+}
+
static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
{
- u16 reply;
+ __le16 reply;
int err;
err = omnia_cmd_read(client, cmd, &reply, sizeof(reply));
@@ -62,4 +117,8 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
return err ?: reply;
}
+extern const struct attribute_group omnia_mcu_gpio_group;
+
+int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+
#endif /* __TURRIS_OMNIA_MCU_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
2023-10-23 14:31 ` [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Marek Behún
@ 2023-10-23 20:04 ` Andy Shevchenko
2023-10-26 16:14 ` Marek Behún
0 siblings, 1 reply; 16+ messages in thread
From: Andy Shevchenko @ 2023-10-23 20:04 UTC (permalink / raw)
To: Marek Behún
Cc: Gregory CLEMENT, Arnd Bergmann, soc, arm, Linus Walleij,
Bartosz Golaszewski, linux-gpio
On Mon, Oct 23, 2023 at 04:31:26PM +0200, Marek Behún wrote:
> Add support for GPIOs connected to the MCU on the Turris Omnia board.
>
> This includes:
> - front button pin
> - enable pins for USB regulators
> - MiniPCIe / mSATA card presence pins in MiniPCIe port 0
> - LED output pins from WAN ethernet PHY, LAN switch and MiniPCIe ports
> - on board revisions 32+ also various peripheral resets and another
> voltage regulator enable pin
...
> +static bool omnia_gpio_available(struct omnia_mcu *mcu,
> + const struct omnia_gpio *gpio)
> +{
> + if (gpio->feat_mask)
> + return (mcu->features & gpio->feat_mask) == gpio->feat;
> + else if (gpio->feat)
Redundant 'else'.
> + return mcu->features & gpio->feat;
> +
> + return true;
> +}
...
> +static int omnia_gpio_init_valid_mask(struct gpio_chip *gc,
> + unsigned long *valid_mask,
> + unsigned int ngpios)
> +{
> + struct omnia_mcu *mcu = gpiochip_get_data(gc);
> +
> + for (unsigned int i = 0; i < ngpios; i++) {
> + const struct omnia_gpio *gpio = &omnia_gpios[i];
> + if (!gpio->cmd && !gpio->int_bit) {
> + __clear_bit(i, valid_mask);
> + continue;
> + }
> +
> + __assign_bit(i, valid_mask, omnia_gpio_available(mcu, gpio));
Hmm... Why not simply
if (...)
__clear_bit();
else
__assign_bit(...);
?
> + }
> +
> + return 0;
> +}
...
> +static void omnia_irq_bus_lock(struct irq_data *d)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> + struct omnia_mcu *mcu = gpiochip_get_data(gc);
> +
> + /* nothing to do if MCU firmware does not support new interrupt API */
> + if (!(mcu->features & FEAT_NEW_INT_API))
> + return;
> +
> + mutex_lock(&mcu->lock);
I'm wondering if sparse complains on unbalanced locking. If so,
the function needs an annotation.
> +}
...
> +static void omnia_irq_bus_sync_unlock(struct irq_data *d)
> +{
> + struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> + struct omnia_mcu *mcu = gpiochip_get_data(gc);
> + struct device *dev = &mcu->client->dev;
> + u8 cmd[1 + CMD_INT_ARG_LEN];
> + u32 rising, falling;
> + int err;
> +
> + /* nothing to do if MCU firmware does not support new interrupt API */
> + if (!(mcu->features & FEAT_NEW_INT_API))
> + return;
> +
> + cmd[0] = CMD_SET_INT_MASK;
> +
> + rising = mcu->rising & mcu->mask;
> + falling = mcu->falling & mcu->mask;
> +
> + /* interleave the rising and falling bytes into the command arguments */
> + omnia_mask_interleave(&cmd[1], rising, falling);
> +
> + dev_dbg(dev, "set int mask %8ph\n", &cmd[1]);
> +
> + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
> + if (err) {
> + dev_err(dev, "Cannot set mask: %d\n", err);
> + goto unlock;
> + }
> +
> + /*
> + * Remember which GPIOs have both rising and falling interrupts enabled.
> + * For those we will cache their value so that .get() method is faster.
> + * We also need to forget cached values of GPIOs that aren't cached
> + * anymore.
> + */
> + mcu->both = rising & falling;
> + mcu->is_cached &= mcu->both;
> +
> +unlock:
> + mutex_unlock(&mcu->lock);
> +}
Same question as above.
...
> +static void omnia_irq_init_valid_mask(struct gpio_chip *gc,
> + unsigned long *valid_mask,
> + unsigned int ngpios)
> +{
> + struct omnia_mcu *mcu = gpiochip_get_data(gc);
> +
> + for (unsigned int i = 0; i < ngpios; i++) {
> + const struct omnia_gpio *gpio = &omnia_gpios[i];
> +
> + if (!gpio->int_bit) {
> + __clear_bit(i, valid_mask);
> + continue;
> + }
> +
> + __assign_bit(i, valid_mask, omnia_gpio_available(mcu, gpio));
if-else ?
> + }
> +}
...
> +static void omnia_mcu_mutex_destroy(void *data)
> +{
> + struct mutex *lock = data;
> +
> + mutex_destroy(lock);
> +}
Can be shrunk to oneliner:
static void omnia_mcu_mutex_destroy(void *lock)
{
mutex_destroy(lock);
}
...
> + /*
> + * The button_release_emul_work has to be initialized before the
> + * thread is requested, and on driver remove it needs to be
> + * canceled before the thread is freed. Therefore we can't use
> + * devm_delayed_work_autocancel() directly, because the order
> + * devm_delayed_work_autocancel();
> + * devm_request_threaded_irq();
> + * would cause improper release order:
> + * free_irq();
> + * cancel_delayed_work_sync();
> + * Instead we first initialize the work above, and only now
> + * after IRQ is requested we add the work devm action.
> + */
...
> +/* Returns 0 on success */
> +static inline int omnia_cmd_read_bits(const struct i2c_client *client, u8 cmd,
> + u32 bits, u32 *dst)
> +{
> + __le32 reply;
> + int err;
> +
> + if (!bits) {
> + *dst = 0;
> + return 0;
> + }
> + err = omnia_cmd_read(client, cmd, &reply, (__fls(bits) >> 3) + 1);
> + if (!err)
> + *dst = le32_to_cpu(reply) & bits;
> +
> + return err;
Why not be in align with the below, i.e.
if (err)
return err;
...
return 0;
?
> +}
> +
> +static inline int omnia_cmd_read_bit(const struct i2c_client *client, u8 cmd,
> + u32 bit)
> +{
> + u32 reply;
> + int err;
> +
> + err = omnia_cmd_read_bits(client, cmd, bit, &reply);
> + if (err)
> + return err;
> +
> + return !!reply;
> +}
...
> static inline int omnia_cmd_read_u16(const struct i2c_client *client, u8 cmd)
> {
> - u16 reply;
> + __le16 reply;
> int err;
Shouldn't this be a part of another patch?
> }
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs
2023-10-23 20:04 ` Andy Shevchenko
@ 2023-10-26 16:14 ` Marek Behún
0 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-26 16:14 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Gregory CLEMENT, Arnd Bergmann, soc, arm, Linus Walleij,
Bartosz Golaszewski, linux-gpio
On Mon, Oct 23, 2023 at 11:04:07PM +0300, Andy Shevchenko wrote:
> On Mon, Oct 23, 2023 at 04:31:26PM +0200, Marek Behún wrote:
...
> > +static void omnia_irq_bus_lock(struct irq_data *d)
> > +{
> > + struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
> > + struct omnia_mcu *mcu = gpiochip_get_data(gc);
> > +
> > + /* nothing to do if MCU firmware does not support new interrupt API */
> > + if (!(mcu->features & FEAT_NEW_INT_API))
> > + return;
> > +
> > + mutex_lock(&mcu->lock);
>
> I'm wondering if sparse complains on unbalanced locking. If so,
> the function needs an annotation.
Hi Andy, thanks for your review.
OK so I looked into this and it seems that mutex API does not do
__acquire / __release yet...
I've incorporated your other suggestions and am sending v4.
Marek
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
` (2 preceding siblings ...)
2023-10-23 14:31 ` [PATCH v3 3/7] platform: cznic: turris-omnia-mcu: Add support for MCU connected GPIOs Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 19:40 ` Andy Shevchenko
2023-10-23 14:31 ` [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog Marek Behún
` (2 subsequent siblings)
6 siblings, 1 reply; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij, Alessandro Zummo, Alexandre Belloni,
Bartosz Golaszewski, linux-rtc
Cc: Marek Behún
Add support for true board poweroff (MCU can disable all unnecessary
voltage regulators) and wakeup at a specified time, implemented via a
RTC driver so that the rtcwake utility can be used to configure it.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../sysfs-bus-i2c-devices-turris-omnia-mcu | 16 ++
drivers/platform/cznic/Kconfig | 4 +
drivers/platform/cznic/Makefile | 1 +
.../platform/cznic/turris-omnia-mcu-base.c | 5 +
.../cznic/turris-omnia-mcu-sys-off-wakeup.c | 250 ++++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 20 ++
6 files changed, 296 insertions(+)
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
index e635ba45ef9a..a69172d5b998 100644
--- a/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-turris-omnia-mcu
@@ -14,6 +14,22 @@ Description: (RW) The front button on the Turris Omnia router can be
Format: %s.
+What: /sys/bus/i2c/devices/<mcu_device>/front_button_poweron
+Date: August 2023
+KernelVersion: 6.6
+Contact: Marek Behún <kabel@kernel.org>
+Description: (RW) Newer versions of the microcontroller firmware of the
+ Turris Omnia router support powering off the router into true
+ low power mode. The router can be powered on by pressing the
+ front button.
+
+ This file configures whether front button power on is enabled.
+
+ This file is present only if the power off feature is supported
+ by the firmware.
+
+ Format: %i.
+
What: /sys/bus/i2c/devices/<mcu_device>/fw_features
Date: November 2023
KernelVersion: 6.7
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index 3a8c3edcd7e6..0a752aa654fa 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -19,10 +19,14 @@ config TURRIS_OMNIA_MCU
depends on I2C
select GPIOLIB
select GPIOLIB_IRQCHIP
+ select RTC_CLASS
help
Say Y here to add support for the features implemented by the
microcontroller on the CZ.NIC's Turris Omnia SOHO router.
The features include:
+ - board poweroff into true low power mode (with voltage regulators
+ disabled) and the ability to configure wake up from this mode (via
+ rtcwake)
- GPIO pins
- to get front button press events (the front button can be
configured either to generate press events to the CPU or to change
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index a6177f5b4fff..6f1470d1f673 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -3,3 +3,4 @@
obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
turris-omnia-mcu-objs := turris-omnia-mcu-base.o
turris-omnia-mcu-objs += turris-omnia-mcu-gpio.o
+turris-omnia-mcu-objs += turris-omnia-mcu-sys-off-wakeup.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index 912058694d77..942061a0ee66 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -113,6 +113,7 @@ static const struct attribute_group omnia_mcu_base_group = {
static const struct attribute_group *omnia_mcu_groups[] = {
&omnia_mcu_base_group,
&omnia_mcu_gpio_group,
+ &omnia_mcu_poweroff_group,
NULL
};
@@ -238,6 +239,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
return dev_err_probe(dev, err,
"Cannot determine MCU supported features\n");
+ err = omnia_mcu_register_sys_off_and_wakeup(mcu);
+ if (err)
+ return err;
+
return omnia_mcu_register_gpiochip(mcu);
}
diff --git a/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
new file mode 100644
index 000000000000..3c4938915480
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-sys-off-wakeup.c
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU system off and RTC wakeup driver
+ *
+ * This is not a true RTC driver (in the sense that it does not provide a
+ * real-time clock), rather the MCU implements a wakeup from powered off state
+ * at a specified time relative to MCU boot, and we expose this feature via RTC
+ * alarm, so that it can be used via the rtcwake command, which is the standard
+ * Linux command for this.
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/crc32.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/reboot.h>
+#include <linux/rtc.h>
+#include <linux/sysfs.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+
+#include "turris-omnia-mcu.h"
+
+static int omnia_get_uptime_wakeup(const struct i2c_client *client, u32 *uptime,
+ u32 *wakeup)
+{
+ __le32 reply[2];
+ int err;
+
+ err = omnia_cmd_read(client, CMD_GET_UPTIME_AND_WAKEUP, reply,
+ sizeof(reply));
+ if (err)
+ return err;
+
+ if (uptime)
+ *uptime = le32_to_cpu(reply[0]);
+
+ if (wakeup)
+ *wakeup = le32_to_cpu(reply[1]);
+
+ return 0;
+}
+
+static int omnia_read_time(struct device *dev, struct rtc_time *tm)
+{
+ u32 uptime;
+ int err;
+
+ err = omnia_get_uptime_wakeup(to_i2c_client(dev), &uptime, NULL);
+ if (err)
+ return err;
+
+ rtc_time64_to_tm(uptime, tm);
+
+ return 0;
+}
+
+static int omnia_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+ u32 wakeup;
+ int err;
+
+ err = omnia_get_uptime_wakeup(client, NULL, &wakeup);
+ if (err)
+ return err;
+
+ alrm->enabled = !!wakeup;
+ rtc_time64_to_tm(wakeup ?: mcu->rtc_alarm, &alrm->time);
+
+ return 0;
+}
+
+static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+ mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time);
+
+ if (alrm->enabled)
+ return omnia_cmd_write_u32(client, CMD_SET_WAKEUP,
+ mcu->rtc_alarm);
+ else
+ return 0;
+}
+
+static int omnia_alarm_irq_enable(struct device *dev, unsigned int enabled)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct omnia_mcu *mcu = i2c_get_clientdata(client);
+
+ return omnia_cmd_write_u32(client, CMD_SET_WAKEUP,
+ enabled ? mcu->rtc_alarm : 0);
+}
+
+static const struct rtc_class_ops omnia_rtc_ops = {
+ .read_time = omnia_read_time,
+ .read_alarm = omnia_read_alarm,
+ .set_alarm = omnia_set_alarm,
+ .alarm_irq_enable = omnia_alarm_irq_enable,
+};
+
+static int omnia_power_off(struct sys_off_data *data)
+{
+ struct omnia_mcu *mcu = data->cb_data;
+ __be32 tmp;
+ u8 cmd[9];
+ u16 arg;
+ int err;
+
+ if (mcu->front_button_poweron)
+ arg = CMD_POWER_OFF_POWERON_BUTTON;
+ else
+ arg = 0;
+
+ cmd[0] = CMD_POWER_OFF;
+ put_unaligned_le16(CMD_POWER_OFF_MAGIC, &cmd[1]);
+ put_unaligned_le16(arg, &cmd[3]);
+
+ tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
+ put_unaligned_le32(crc32_be(0xffffffff, (void *)&tmp, sizeof(tmp)),
+ &cmd[5]);
+
+ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+ if (err)
+ dev_err(&mcu->client->dev,
+ "Unable to send the poweroff command: %d\n", err);
+
+ return NOTIFY_DONE;
+}
+
+static int omnia_restart(struct sys_off_data *data)
+{
+ struct omnia_mcu *mcu = data->cb_data;
+ u8 cmd[3];
+ int err;
+
+ cmd[0] = CMD_GENERAL_CONTROL;
+
+ if (reboot_mode == REBOOT_HARD)
+ cmd[1] = cmd[2] = CTL_HARD_RST;
+ else
+ cmd[1] = cmd[2] = CTL_LIGHT_RST;
+
+ err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
+ if (err)
+ dev_err(&mcu->client->dev,
+ "Unable to send the restart command: %d\n", err);
+
+ /*
+ * MCU needs a little bit to process the I2C command, otherwise it will
+ * do a light reset based on SOC SYSRES_OUT pin.
+ */
+ mdelay(1);
+
+ return NOTIFY_DONE;
+}
+
+static ssize_t front_button_poweron_show(struct device *dev,
+ struct device_attribute *a, char *buf)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+ return sysfs_emit(buf, "%d\n", mcu->front_button_poweron);
+}
+
+static ssize_t front_button_poweron_store(struct device *dev,
+ struct device_attribute *a,
+ const char *buf, size_t count)
+{
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+ bool val;
+
+ if (kstrtobool(buf, &val) < 0)
+ return -EINVAL;
+
+ mcu->front_button_poweron = val;
+
+ return count;
+}
+static DEVICE_ATTR_RW(front_button_poweron);
+
+static struct attribute *omnia_mcu_poweroff_attrs[] = {
+ &dev_attr_front_button_poweron.attr,
+ NULL
+};
+
+static umode_t poweroff_attrs_visible(struct kobject *kobj, struct attribute *a,
+ int n)
+{
+ struct device *dev = container_of(kobj, typeof(*dev), kobj);
+ struct omnia_mcu *mcu = i2c_get_clientdata(to_i2c_client(dev));
+
+ if (mcu->features & FEAT_POWEROFF_WAKEUP)
+ return a->mode;
+
+ return 0;
+}
+
+const struct attribute_group omnia_mcu_poweroff_group = {
+ .attrs = omnia_mcu_poweroff_attrs,
+ .is_visible = poweroff_attrs_visible,
+};
+
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu)
+{
+ struct device *dev = &mcu->client->dev;
+ int err;
+
+ /* MCU restart is always available */
+ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART,
+ SYS_OFF_PRIO_FIRMWARE,
+ omnia_restart, mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot register system restart handler\n");
+
+ /*
+ * poweroff and wakeup are available only if POWEROFF_WAKEUP feature is
+ * present
+ */
+ if (!(mcu->features & FEAT_POWEROFF_WAKEUP))
+ return 0;
+
+ err = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF,
+ SYS_OFF_PRIO_FIRMWARE,
+ omnia_power_off, mcu);
+ if (err)
+ return dev_err_probe(dev, err,
+ "Cannot register system power off handler\n");
+
+ mcu->rtcdev = devm_rtc_allocate_device(dev);
+ if (IS_ERR(mcu->rtcdev))
+ return dev_err_probe(dev, PTR_ERR(mcu->rtcdev),
+ "Cannot allocate RTC device\n");
+
+ mcu->rtcdev->ops = &omnia_rtc_ops;
+ mcu->rtcdev->range_max = U32_MAX;
+
+ err = devm_rtc_register_device(mcu->rtcdev);
+ if (err)
+ return dev_err_probe(dev, err, "Cannot register RTC device\n");
+
+ mcu->front_button_poweron = true;
+
+ return err;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index 12afc45ed5bc..c6a8036e0534 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -12,9 +12,11 @@
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/mutex.h>
+#include <linux/rtc.h>
#include <linux/types.h>
#include <linux/workqueue.h>
#include <asm/byteorder.h>
+#include <asm/unaligned.h>
struct omnia_mcu {
struct i2c_client *client;
@@ -29,6 +31,11 @@ struct omnia_mcu {
struct delayed_work button_release_emul_work;
u16 last_status;
bool button_pressed_emul;
+
+ /* RTC device for configuring wake-up */
+ struct rtc_device *rtcdev;
+ u32 rtc_alarm;
+ bool front_button_poweron;
};
static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
@@ -41,6 +48,17 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
return ret < 0 ? ret : 0;
}
+static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
+ u32 val)
+{
+ u8 buf[5];
+
+ buf[0] = cmd;
+ put_unaligned_le32(val, &buf[1]);
+
+ return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
static inline int omnia_cmd_read(const struct i2c_client *client, u8 cmd, void *reply,
unsigned int len)
{
@@ -118,7 +136,9 @@ static inline int omnia_cmd_read_u8(const struct i2c_client *client, u8 cmd)
}
extern const struct attribute_group omnia_mcu_gpio_group;
+extern const struct attribute_group omnia_mcu_poweroff_group;
int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
+int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
#endif /* __TURRIS_OMNIA_MCU_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
2023-10-23 14:31 ` [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
@ 2023-10-23 19:40 ` Andy Shevchenko
2023-10-26 16:16 ` Marek Behún
0 siblings, 1 reply; 16+ messages in thread
From: Andy Shevchenko @ 2023-10-23 19:40 UTC (permalink / raw)
To: Marek Behún
Cc: Gregory CLEMENT, Arnd Bergmann, soc, arm, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Bartosz Golaszewski,
linux-rtc
On Mon, Oct 23, 2023 at 04:31:27PM +0200, Marek Behún wrote:
> Add support for true board poweroff (MCU can disable all unnecessary
> voltage regulators) and wakeup at a specified time, implemented via a
> RTC driver so that the rtcwake utility can be used to configure it.
...
> +static int omnia_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct i2c_client *client = to_i2c_client(dev);
> + struct omnia_mcu *mcu = i2c_get_clientdata(client);
> +
> + mcu->rtc_alarm = rtc_tm_to_time64(&alrm->time);
> +
> + if (alrm->enabled)
> + return omnia_cmd_write_u32(client, CMD_SET_WAKEUP,
> + mcu->rtc_alarm);
> + else
Redundant 'else'.
> + return 0;
> +}
...
> +static int omnia_power_off(struct sys_off_data *data)
> +
> + struct omnia_mcu *mcu = data->cb_data;
> + __be32 tmp;
> + u8 cmd[9];
> + u16 arg;
> + int err;
> +
> + if (mcu->front_button_poweron)
> + arg = CMD_POWER_OFF_POWERON_BUTTON;
> + else
> + arg = 0;
> +
> + cmd[0] = CMD_POWER_OFF;
> + put_unaligned_le16(CMD_POWER_OFF_MAGIC, &cmd[1]);
> + put_unaligned_le16(arg, &cmd[3]);
> + tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
> + put_unaligned_le32(crc32_be(0xffffffff, (void *)&tmp, sizeof(tmp)),
> + &cmd[5]);
Hmm... Why crc32_le*() can't be used?
> + err = omnia_cmd_write(mcu->client, cmd, sizeof(cmd));
> + if (err)
> + dev_err(&mcu->client->dev,
> + "Unable to send the poweroff command: %d\n", err);
> +
> + return NOTIFY_DONE;
> +}
...
> + if (kstrtobool(buf, &val) < 0)
> + return -EINVAL;
Why is the error code shadowed?
...
> + struct device *dev = container_of(kobj, typeof(*dev), kobj);
kobj_to_dev()?
...
> + /*
> + * poweroff and wakeup are available only if POWEROFF_WAKEUP feature is
> + * present
Missing period at the end.
> + */
...
> + err = devm_rtc_register_device(mcu->rtcdev);
> + if (err)
> + return dev_err_probe(dev, err, "Cannot register RTC device\n");
> +
> + mcu->front_button_poweron = true;
> + return err;
Can it be anything than 0?
--
With Best Regards,
Andy Shevchenko
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup
2023-10-23 19:40 ` Andy Shevchenko
@ 2023-10-26 16:16 ` Marek Behún
0 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-26 16:16 UTC (permalink / raw)
To: Andy Shevchenko
Cc: Gregory CLEMENT, Arnd Bergmann, soc, arm, Linus Walleij,
Alessandro Zummo, Alexandre Belloni, Bartosz Golaszewski,
linux-rtc
On Mon, Oct 23, 2023 at 10:40:45PM +0300, Andy Shevchenko wrote:
> On Mon, Oct 23, 2023 at 04:31:27PM +0200, Marek Behún wrote:
...
> > + tmp = cpu_to_be32(get_unaligned_le32(&cmd[1]));
> > + put_unaligned_le32(crc32_be(0xffffffff, (void *)&tmp, sizeof(tmp)),
> > + &cmd[5]);
>
> Hmm... Why crc32_le*() can't be used?
I am adding a comment to explain this in v4.
Thx for review.
Marek
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
` (3 preceding siblings ...)
2023-10-23 14:31 ` [PATCH v3 4/7] platform: cznic: turris-omnia-mcu: Add support for poweroff and wakeup Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 14:47 ` Guenter Roeck
2023-10-23 14:31 ` [PATCH v3 6/7] ARM: dts: turris-omnia: Add MCU system-controller node Marek Behún
2023-10-23 14:31 ` [PATCH v3 7/7] ARM: dts: turris-omnia: Add GPIO key node for front button Marek Behún
6 siblings, 1 reply; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij, Bartosz Golaszewski, Guenter Roeck, linux-watchdog,
Wim Van Sebroeck
Cc: Marek Behún
Add support for the watchdog mechanism provided by the MCU.
Signed-off-by: Marek Behún <kabel@kernel.org>
---
drivers/platform/cznic/Kconfig | 2 +
drivers/platform/cznic/Makefile | 1 +
.../platform/cznic/turris-omnia-mcu-base.c | 4 +
.../cznic/turris-omnia-mcu-watchdog.c | 122 ++++++++++++++++++
drivers/platform/cznic/turris-omnia-mcu.h | 24 ++++
5 files changed, 153 insertions(+)
create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
index 0a752aa654fa..e2649cdecc38 100644
--- a/drivers/platform/cznic/Kconfig
+++ b/drivers/platform/cznic/Kconfig
@@ -20,6 +20,7 @@ config TURRIS_OMNIA_MCU
select GPIOLIB
select GPIOLIB_IRQCHIP
select RTC_CLASS
+ select WATCHDOG_CORE
help
Say Y here to add support for the features implemented by the
microcontroller on the CZ.NIC's Turris Omnia SOHO router.
@@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU
- board poweroff into true low power mode (with voltage regulators
disabled) and the ability to configure wake up from this mode (via
rtcwake)
+ - MCU watchdog
- GPIO pins
- to get front button press events (the front button can be
configured either to generate press events to the CPU or to change
diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
index 6f1470d1f673..a43997a12d74 100644
--- a/drivers/platform/cznic/Makefile
+++ b/drivers/platform/cznic/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
turris-omnia-mcu-objs := turris-omnia-mcu-base.o
turris-omnia-mcu-objs += turris-omnia-mcu-gpio.o
turris-omnia-mcu-objs += turris-omnia-mcu-sys-off-wakeup.o
+turris-omnia-mcu-objs += turris-omnia-mcu-watchdog.o
diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
index 942061a0ee66..521397bfc022 100644
--- a/drivers/platform/cznic/turris-omnia-mcu-base.c
+++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
@@ -243,6 +243,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
if (err)
return err;
+ err = omnia_mcu_register_watchdog(mcu);
+ if (err)
+ return err;
+
return omnia_mcu_register_gpiochip(mcu);
}
diff --git a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
new file mode 100644
index 000000000000..6685166bc4c7
--- /dev/null
+++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
@@ -0,0 +1,122 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CZ.NIC's Turris Omnia MCU watchdog driver
+ *
+ * 2023 by Marek Behún <kabel@kernel.org>
+ */
+
+#include <linux/moduleparam.h>
+#include <linux/turris-omnia-mcu-interface.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#include "turris-omnia-mcu.h"
+
+#define WATCHDOG_TIMEOUT 120
+
+static unsigned int timeout;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static int omnia_wdt_start(struct watchdog_device *wdt)
+{
+ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+ return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
+}
+
+static int omnia_wdt_stop(struct watchdog_device *wdt)
+{
+ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+ return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 0);
+}
+
+static int omnia_wdt_ping(struct watchdog_device *wdt)
+{
+ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+ return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
+}
+
+static int omnia_wdt_set_timeout(struct watchdog_device *wdt,
+ unsigned int timeout)
+{
+ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+
+ return omnia_cmd_write_u16(mcu->client, CMD_SET_WDT_TIMEOUT,
+ timeout * 10);
+}
+
+static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt)
+{
+ struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
+ int ret;
+
+ ret = omnia_cmd_read_u16(mcu->client, CMD_GET_WDT_TIMELEFT);
+ if (ret < 0) {
+ dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n",
+ ret);
+ return 0;
+ }
+
+ return ret / 10;
+}
+
+static const struct watchdog_info omnia_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "Turris Omnia MCU Watchdog",
+};
+
+static const struct watchdog_ops omnia_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = omnia_wdt_start,
+ .stop = omnia_wdt_stop,
+ .ping = omnia_wdt_ping,
+ .set_timeout = omnia_wdt_set_timeout,
+ .get_timeleft = omnia_wdt_get_timeleft,
+};
+
+int omnia_mcu_register_watchdog(struct omnia_mcu *mcu)
+{
+ struct device *dev = &mcu->client->dev;
+ int ret;
+
+ if (!(mcu->features & FEAT_WDT_PING))
+ return 0;
+
+ mcu->wdt.info = &omnia_wdt_info;
+ mcu->wdt.ops = &omnia_wdt_ops;
+ mcu->wdt.parent = dev;
+ mcu->wdt.min_timeout = 1;
+ mcu->wdt.max_timeout = 6553; /* 65535 deciseconds */
+
+ mcu->wdt.timeout = WATCHDOG_TIMEOUT;
+ watchdog_init_timeout(&mcu->wdt, timeout, dev);
+
+ watchdog_set_drvdata(&mcu->wdt, mcu);
+
+ omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout);
+
+ ret = omnia_cmd_read_u8(mcu->client, CMD_GET_WATCHDOG_STATE);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Cannot get MCU watchdog state\n");
+
+ if (ret)
+ set_bit(WDOG_HW_RUNNING, &mcu->wdt.status);
+
+ watchdog_set_nowayout(&mcu->wdt, nowayout);
+ watchdog_stop_on_reboot(&mcu->wdt);
+ ret = devm_watchdog_register_device(dev, &mcu->wdt);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Cannot register MCU watchdog\n");
+
+ return 0;
+}
diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
index c6a8036e0534..db2d18d6eea8 100644
--- a/drivers/platform/cznic/turris-omnia-mcu.h
+++ b/drivers/platform/cznic/turris-omnia-mcu.h
@@ -14,6 +14,7 @@
#include <linux/mutex.h>
#include <linux/rtc.h>
#include <linux/types.h>
+#include <linux/watchdog.h>
#include <linux/workqueue.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
@@ -36,6 +37,9 @@ struct omnia_mcu {
struct rtc_device *rtcdev;
u32 rtc_alarm;
bool front_button_poweron;
+
+ /* MCU watchdog */
+ struct watchdog_device wdt;
};
static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
@@ -48,6 +52,25 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
return ret < 0 ? ret : 0;
}
+static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd,
+ u8 val)
+{
+ u8 buf[2] = { cmd, val };
+
+ return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
+static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd,
+ u16 val)
+{
+ u8 buf[3];
+
+ buf[0] = cmd;
+ put_unaligned_le16(val, &buf[1]);
+
+ return omnia_cmd_write(client, buf, sizeof(buf));
+}
+
static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
u32 val)
{
@@ -140,5 +163,6 @@ extern const struct attribute_group omnia_mcu_poweroff_group;
int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
+int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
#endif /* __TURRIS_OMNIA_MCU_H */
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
2023-10-23 14:31 ` [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog Marek Behún
@ 2023-10-23 14:47 ` Guenter Roeck
2023-10-23 14:59 ` Marek Behún
0 siblings, 1 reply; 16+ messages in thread
From: Guenter Roeck @ 2023-10-23 14:47 UTC (permalink / raw)
To: Marek Behún, Gregory CLEMENT, Arnd Bergmann, soc, arm,
Andy Shevchenko, Linus Walleij, Bartosz Golaszewski,
linux-watchdog, Wim Van Sebroeck
On 10/23/23 07:31, Marek Behún wrote:
> Add support for the watchdog mechanism provided by the MCU.
>
> Signed-off-by: Marek Behún <kabel@kernel.org>
Any reason for keeping this out of drivers/watchdog ?
> ---
> drivers/platform/cznic/Kconfig | 2 +
> drivers/platform/cznic/Makefile | 1 +
> .../platform/cznic/turris-omnia-mcu-base.c | 4 +
> .../cznic/turris-omnia-mcu-watchdog.c | 122 ++++++++++++++++++
> drivers/platform/cznic/turris-omnia-mcu.h | 24 ++++
> 5 files changed, 153 insertions(+)
> create mode 100644 drivers/platform/cznic/turris-omnia-mcu-watchdog.c
>
> diff --git a/drivers/platform/cznic/Kconfig b/drivers/platform/cznic/Kconfig
> index 0a752aa654fa..e2649cdecc38 100644
> --- a/drivers/platform/cznic/Kconfig
> +++ b/drivers/platform/cznic/Kconfig
> @@ -20,6 +20,7 @@ config TURRIS_OMNIA_MCU
> select GPIOLIB
> select GPIOLIB_IRQCHIP
> select RTC_CLASS
> + select WATCHDOG_CORE
> help
> Say Y here to add support for the features implemented by the
> microcontroller on the CZ.NIC's Turris Omnia SOHO router.
> @@ -27,6 +28,7 @@ config TURRIS_OMNIA_MCU
> - board poweroff into true low power mode (with voltage regulators
> disabled) and the ability to configure wake up from this mode (via
> rtcwake)
> + - MCU watchdog
> - GPIO pins
> - to get front button press events (the front button can be
> configured either to generate press events to the CPU or to change
> diff --git a/drivers/platform/cznic/Makefile b/drivers/platform/cznic/Makefile
> index 6f1470d1f673..a43997a12d74 100644
> --- a/drivers/platform/cznic/Makefile
> +++ b/drivers/platform/cznic/Makefile
> @@ -4,3 +4,4 @@ obj-$(CONFIG_TURRIS_OMNIA_MCU) += turris-omnia-mcu.o
> turris-omnia-mcu-objs := turris-omnia-mcu-base.o
> turris-omnia-mcu-objs += turris-omnia-mcu-gpio.o
> turris-omnia-mcu-objs += turris-omnia-mcu-sys-off-wakeup.o
> +turris-omnia-mcu-objs += turris-omnia-mcu-watchdog.o
> diff --git a/drivers/platform/cznic/turris-omnia-mcu-base.c b/drivers/platform/cznic/turris-omnia-mcu-base.c
> index 942061a0ee66..521397bfc022 100644
> --- a/drivers/platform/cznic/turris-omnia-mcu-base.c
> +++ b/drivers/platform/cznic/turris-omnia-mcu-base.c
> @@ -243,6 +243,10 @@ static int omnia_mcu_probe(struct i2c_client *client)
> if (err)
> return err;
>
> + err = omnia_mcu_register_watchdog(mcu);
> + if (err)
> + return err;
> +
> return omnia_mcu_register_gpiochip(mcu);
> }
>
> diff --git a/drivers/platform/cznic/turris-omnia-mcu-watchdog.c b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
> new file mode 100644
> index 000000000000..6685166bc4c7
> --- /dev/null
> +++ b/drivers/platform/cznic/turris-omnia-mcu-watchdog.c
> @@ -0,0 +1,122 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * CZ.NIC's Turris Omnia MCU watchdog driver
> + *
> + * 2023 by Marek Behún <kabel@kernel.org>
> + */
> +
> +#include <linux/moduleparam.h>
> +#include <linux/turris-omnia-mcu-interface.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
> +
> +#include "turris-omnia-mcu.h"
> +
> +#define WATCHDOG_TIMEOUT 120
> +
> +static unsigned int timeout;
> +module_param(timeout, int, 0);
> +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
> +
> +static bool nowayout = WATCHDOG_NOWAYOUT;
> +module_param(nowayout, bool, 0);
> +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
> + __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
> +
> +static int omnia_wdt_start(struct watchdog_device *wdt)
> +{
> + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
> +
> + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
> +}
> +
> +static int omnia_wdt_stop(struct watchdog_device *wdt)
> +{
> + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
> +
> + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 0);
> +}
> +
> +static int omnia_wdt_ping(struct watchdog_device *wdt)
> +{
> + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
> +
> + return omnia_cmd_write_u8(mcu->client, CMD_SET_WATCHDOG_STATE, 1);
> +}
> +
> +static int omnia_wdt_set_timeout(struct watchdog_device *wdt,
> + unsigned int timeout)
> +{
> + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
> +
> + return omnia_cmd_write_u16(mcu->client, CMD_SET_WDT_TIMEOUT,
> + timeout * 10);
> +}
> +
> +static unsigned int omnia_wdt_get_timeleft(struct watchdog_device *wdt)
> +{
> + struct omnia_mcu *mcu = watchdog_get_drvdata(wdt);
> + int ret;
> +
> + ret = omnia_cmd_read_u16(mcu->client, CMD_GET_WDT_TIMELEFT);
> + if (ret < 0) {
> + dev_err(&mcu->client->dev, "Cannot get watchdog timeleft: %d\n",
> + ret);
> + return 0;
> + }
> +
> + return ret / 10;
> +}
> +
> +static const struct watchdog_info omnia_wdt_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "Turris Omnia MCU Watchdog",
> +};
> +
> +static const struct watchdog_ops omnia_wdt_ops = {
> + .owner = THIS_MODULE,
> + .start = omnia_wdt_start,
> + .stop = omnia_wdt_stop,
> + .ping = omnia_wdt_ping,
> + .set_timeout = omnia_wdt_set_timeout,
> + .get_timeleft = omnia_wdt_get_timeleft,
> +};
> +
> +int omnia_mcu_register_watchdog(struct omnia_mcu *mcu)
> +{
> + struct device *dev = &mcu->client->dev;
> + int ret;
> +
> + if (!(mcu->features & FEAT_WDT_PING))
> + return 0;
> +
Why check this here and not in the calling code ?
> + mcu->wdt.info = &omnia_wdt_info;
> + mcu->wdt.ops = &omnia_wdt_ops;
> + mcu->wdt.parent = dev;
> + mcu->wdt.min_timeout = 1;
> + mcu->wdt.max_timeout = 6553; /* 65535 deciseconds */
> +
> + mcu->wdt.timeout = WATCHDOG_TIMEOUT;
> + watchdog_init_timeout(&mcu->wdt, timeout, dev);
> +
> + watchdog_set_drvdata(&mcu->wdt, mcu);
> +
> + omnia_wdt_set_timeout(&mcu->wdt, mcu->wdt.timeout);
> +
> + ret = omnia_cmd_read_u8(mcu->client, CMD_GET_WATCHDOG_STATE);
> + if (ret < 0)
> + return dev_err_probe(dev, ret,
> + "Cannot get MCU watchdog state\n");
> +
> + if (ret)
> + set_bit(WDOG_HW_RUNNING, &mcu->wdt.status);
> +
> + watchdog_set_nowayout(&mcu->wdt, nowayout);
> + watchdog_stop_on_reboot(&mcu->wdt);
> + ret = devm_watchdog_register_device(dev, &mcu->wdt);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Cannot register MCU watchdog\n");
> +
> + return 0;
> +}
> diff --git a/drivers/platform/cznic/turris-omnia-mcu.h b/drivers/platform/cznic/turris-omnia-mcu.h
> index c6a8036e0534..db2d18d6eea8 100644
> --- a/drivers/platform/cznic/turris-omnia-mcu.h
> +++ b/drivers/platform/cznic/turris-omnia-mcu.h
> @@ -14,6 +14,7 @@
> #include <linux/mutex.h>
> #include <linux/rtc.h>
> #include <linux/types.h>
> +#include <linux/watchdog.h>
> #include <linux/workqueue.h>
> #include <asm/byteorder.h>
> #include <asm/unaligned.h>
> @@ -36,6 +37,9 @@ struct omnia_mcu {
> struct rtc_device *rtcdev;
> u32 rtc_alarm;
> bool front_button_poweron;
> +
> + /* MCU watchdog */
> + struct watchdog_device wdt;
This should be internal to the watchdog driver.
> };
>
> static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
> @@ -48,6 +52,25 @@ static inline int omnia_cmd_write(const struct i2c_client *client, void *cmd,
> return ret < 0 ? ret : 0;
> }
>
> +static inline int omnia_cmd_write_u8(const struct i2c_client *client, u8 cmd,
> + u8 val)
> +{
> + u8 buf[2] = { cmd, val };
> +
> + return omnia_cmd_write(client, buf, sizeof(buf));
> +}
> +
> +static inline int omnia_cmd_write_u16(const struct i2c_client *client, u8 cmd,
> + u16 val)
> +{
> + u8 buf[3];
> +
> + buf[0] = cmd;
> + put_unaligned_le16(val, &buf[1]);
> +
> + return omnia_cmd_write(client, buf, sizeof(buf));
> +}
> +
> static inline int omnia_cmd_write_u32(const struct i2c_client *client, u8 cmd,
> u32 val)
> {
> @@ -140,5 +163,6 @@ extern const struct attribute_group omnia_mcu_poweroff_group;
>
> int omnia_mcu_register_gpiochip(struct omnia_mcu *mcu);
> int omnia_mcu_register_sys_off_and_wakeup(struct omnia_mcu *mcu);
> +int omnia_mcu_register_watchdog(struct omnia_mcu *mcu);
>
> #endif /* __TURRIS_OMNIA_MCU_H */
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
2023-10-23 14:47 ` Guenter Roeck
@ 2023-10-23 14:59 ` Marek Behún
2023-10-23 15:03 ` Mark Brown
0 siblings, 1 reply; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:59 UTC (permalink / raw)
To: Guenter Roeck
Cc: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij, Bartosz Golaszewski, linux-watchdog,
Wim Van Sebroeck
On Mon, 23 Oct 2023 07:47:44 -0700
Guenter Roeck <linux@roeck-us.net> wrote:
> On 10/23/23 07:31, Marek Behún wrote:
> > Add support for the watchdog mechanism provided by the MCU.
> >
> > Signed-off-by: Marek Behún <kabel@kernel.org>
>
> Any reason for keeping this out of drivers/watchdog ?
Because this whole thing is compiled as one driver, turris-omnia-mcu.ko.
The whole driver is specific for one device, the Turris Omnia router.
Splitting it into separate modules would be unnecessary, the driver is
meant to provide all the Turris Omnia MCU functionality.
I've seen this done in various platform drivers.
Moreover, all of the functionality lives at one I2C address, so only
one I2C client is used.
Originally it was one .c file, but I split it into 4 files to make it
easier to review.
You can look at the other patches at
https://patchwork.kernel.org/project/linux-soc/list/?series=795666
> > + if (!(mcu->features & FEAT_WDT_PING))
> > + return 0;
> > +
>
> Why check this here and not in the calling code ?
No particular reason, just wanted to keep the calling code cleaner.
> > @@ -36,6 +37,9 @@ struct omnia_mcu {
> > struct rtc_device *rtcdev;
> > u32 rtc_alarm;
> > bool front_button_poweron;
> > +
> > + /* MCU watchdog */
> > + struct watchdog_device wdt;
>
> This should be internal to the watchdog driver.
As explained above, all functionality is provided in one kernel module.
This makes sense here since the driver is meant to provide all
MCU functionality and it is specific for Turris Omnia.
Marek
^ permalink raw reply [flat|nested] 16+ messages in thread* Re: [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
2023-10-23 14:59 ` Marek Behún
@ 2023-10-23 15:03 ` Mark Brown
2023-10-23 15:09 ` Marek Behún
0 siblings, 1 reply; 16+ messages in thread
From: Mark Brown @ 2023-10-23 15:03 UTC (permalink / raw)
To: Marek Behún
Cc: Guenter Roeck, Gregory CLEMENT, Arnd Bergmann, soc, arm,
Andy Shevchenko, Linus Walleij, Bartosz Golaszewski,
linux-watchdog, Wim Van Sebroeck
[-- Attachment #1: Type: text/plain, Size: 765 bytes --]
On Mon, Oct 23, 2023 at 04:59:59PM +0200, Marek Behún wrote:
> Guenter Roeck <linux@roeck-us.net> wrote:
> > On 10/23/23 07:31, Marek Behún wrote:
> > > Add support for the watchdog mechanism provided by the MCU.
> > Any reason for keeping this out of drivers/watchdog ?
> Because this whole thing is compiled as one driver, turris-omnia-mcu.ko.
> The whole driver is specific for one device, the Turris Omnia router.
> Splitting it into separate modules would be unnecessary, the driver is
> meant to provide all the Turris Omnia MCU functionality.
> I've seen this done in various platform drivers.
> Moreover, all of the functionality lives at one I2C address, so only
> one I2C client is used.
That all sounds a bit like drivers/mfd...
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog
2023-10-23 15:03 ` Mark Brown
@ 2023-10-23 15:09 ` Marek Behún
0 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-23 15:09 UTC (permalink / raw)
To: Mark Brown
Cc: Guenter Roeck, Gregory CLEMENT, Arnd Bergmann, soc, arm,
Andy Shevchenko, Linus Walleij, Bartosz Golaszewski,
linux-watchdog, Wim Van Sebroeck
On Mon, 23 Oct 2023 16:03:08 +0100
Mark Brown <broonie@kernel.org> wrote:
> On Mon, Oct 23, 2023 at 04:59:59PM +0200, Marek Behún wrote:
> > Guenter Roeck <linux@roeck-us.net> wrote:
> > > On 10/23/23 07:31, Marek Behún wrote:
>
> > > > Add support for the watchdog mechanism provided by the MCU.
>
> > > Any reason for keeping this out of drivers/watchdog ?
>
> > Because this whole thing is compiled as one driver, turris-omnia-mcu.ko.
> > The whole driver is specific for one device, the Turris Omnia router.
> > Splitting it into separate modules would be unnecessary, the driver is
> > meant to provide all the Turris Omnia MCU functionality.
>
> > I've seen this done in various platform drivers.
>
> > Moreover, all of the functionality lives at one I2C address, so only
> > one I2C client is used.
>
> That all sounds a bit like drivers/mfd...
Hi Guenter,
I would have thought so as well, but several years ago I sent a driver
into mfd, and I've been told (I don't remember by who anymore, but I
can find it) that mfd is supposed to contain drivers for multifunction
devices that can be contained on different boards, and that my driver
should go to platform, since it is specific for one hardware.
Marek
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v3 6/7] ARM: dts: turris-omnia: Add MCU system-controller node
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
` (4 preceding siblings ...)
2023-10-23 14:31 ` [PATCH v3 5/7] platform: cznic: turris-omnia-mcu: Add support for MCU watchdog Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
2023-10-23 14:31 ` [PATCH v3 7/7] ARM: dts: turris-omnia: Add GPIO key node for front button Marek Behún
6 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij
Cc: Marek Behún
Turris Omnia's MCU provides various features that can be configured over
I2C at address 0x2a. Add device-tree node.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../dts/marvell/armada-385-turris-omnia.dts | 22 ++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 2d8d319bec83..7682fda4000a 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -218,7 +218,22 @@ i2c@0 {
#size-cells = <0>;
reg = <0>;
- /* STM32F0 command interface at address 0x2a */
+ mcu: system-controller@2a {
+ compatible = "cznic,turris-omnia-mcu";
+ reg = <0x2a>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcu_pins>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <11 IRQ_TYPE_NONE>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
led-controller@2b {
compatible = "cznic,turris-omnia-leds";
@@ -503,6 +518,11 @@ fixed-link {
};
&pinctrl {
+ mcu_pins: mcu-pins {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+
pcawan_pins: pcawan-pins {
marvell,pins = "mpp46";
marvell,function = "gpio";
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v3 7/7] ARM: dts: turris-omnia: Add GPIO key node for front button
2023-10-23 14:31 [PATCH v3 0/7] Turris Omnia MCU driver Marek Behún
` (5 preceding siblings ...)
2023-10-23 14:31 ` [PATCH v3 6/7] ARM: dts: turris-omnia: Add MCU system-controller node Marek Behún
@ 2023-10-23 14:31 ` Marek Behún
6 siblings, 0 replies; 16+ messages in thread
From: Marek Behún @ 2023-10-23 14:31 UTC (permalink / raw)
To: Gregory CLEMENT, Arnd Bergmann, soc, arm, Andy Shevchenko,
Linus Walleij
Cc: Marek Behún
Now that we have the MCU device-tree node, which acts as a GPIO
controller, add GPIO key node for the front button.
Fixes: 26ca8b52d6e1 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Marek Behún <kabel@kernel.org>
---
.../boot/dts/marvell/armada-385-turris-omnia.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
index 7682fda4000a..016adfa0b470 100644
--- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
+++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts
@@ -112,6 +112,19 @@ sfp: sfp {
status = "disabled";
};
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ front-button {
+ label = "Front Button";
+ linux,code = <KEY_VENDOR>;
+ linux,can-disable;
+ gpios = <&mcu 12 GPIO_ACTIVE_HIGH>;
+ /* debouncing is done by the microcontroller */
+ debounce-interval = <0>;
+ };
+ };
+
sound {
compatible = "simple-audio-card";
simple-audio-card,name = "SPDIF";
--
2.41.0
^ permalink raw reply related [flat|nested] 16+ messages in thread