Re: [PATCH v8 02/12] dt-bindings: soc: amlogic,meson-gx-hhi-sysctrl: add example covering meson-axg-hhi-sysctrl

[Rob Herring <robh@kernel.org>]

On Thu, Nov 09, 2023 at 10:00:03AM +0100, Neil Armstrong wrote:
> Add a thirst example covering the meson-axg-hhi-sysctrl variant and more
> importantly the phy subnode.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  | 41 ++++++++++++++++++++++
>  1 file changed, 41 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
> index 16977e4e4357..2edf4ccea845 100644
> --- a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
> +++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
> @@ -158,3 +158,44 @@ examples:
>              };
>          };
>      };
> +

New example should be separate starting with a '-|'.

> +    bus@ff63c000 {
> +        compatible = "simple-bus";
> +        reg = <0xff63c000 0x1c00>;
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0x0 0xff63c000 0x1c00>;

Why do you need all this? 1 cell is the default for examples.

> +
> +        system-controller@0 {
> +            compatible = "amlogic,meson-axg-hhi-sysctrl", "simple-mfd", "syscon";
> +            reg = <0 0x400>;
> +
> +            clock-controller {
> +                compatible = "amlogic,axg-clkc";
> +                #clock-cells = <1>;
> +                clocks = <&xtal>;
> +                clock-names = "xtal";
> +            };
> +
> +            power-controller {
> +                compatible = "amlogic,meson-axg-pwrc";
> +                #power-domain-cells = <1>;
> +                amlogic,ao-sysctrl = <&sysctrl_AO>;
> +
> +                resets = <&reset_viu>,
> +                         <&reset_venc>,
> +                         <&reset_vcbus>,
> +                         <&reset_vencl>,
> +                         <&reset_vid_lock>;
> +                reset-names = "viu", "venc", "vcbus", "vencl", "vid_lock";
> +                clocks = <&clk_vpu>, <&clk_vapb>;
> +                clock-names = "vpu", "vapb";
> +            };
> +
> +            phy {
> +                compatible = "amlogic,axg-mipi-pcie-analog-phy";
> +                #phy-cells = <0>;
> +                status = "disabled";

Examples should not be disabled.

> +            };
> +        };
> +    };
> 
> -- 
> 2.34.1
> 

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic