From: Rob Herring <robh@kernel.org>
To: gabriel.fernandez@foss.st.com
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/5] dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
Date: Sun, 19 Nov 2023 09:23:54 -0600 [thread overview]
Message-ID: <20231119152354.GA216405-robh@kernel.org> (raw)
In-Reply-To: <20231116154952.1206705-4-gabriel.fernandez@foss.st.com>
On Thu, Nov 16, 2023 at 04:49:50PM +0100, gabriel.fernandez@foss.st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
>
> Adds clock and reset binding entries for STM32MP25 SoC family
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> ---
> .../bindings/clock/st,stm32mp25-rcc.yaml | 72 +++
> include/dt-bindings/clock/st,stm32mp25-rcc.h | 492 ++++++++++++++++++
> include/dt-bindings/reset/st,stm32mp25-rcc.h | 165 ++++++
> 3 files changed, 729 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> create mode 100644 include/dt-bindings/clock/st,stm32mp25-rcc.h
> create mode 100644 include/dt-bindings/reset/st,stm32mp25-rcc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> new file mode 100644
> index 000000000000..1bdcfacd62d5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 Reset Clock Controller
> +
> +maintainers:
> + - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> +
> +description: |
> + The RCC hardware block is both a reset and a clock controller.
> + RCC makes also power management (resume/supend).
> +
> + See also::
> + include/dt-bindings/clock/st,stm32mp25-rcc.h
> + include/dt-bindings/reset/st,stm32mp25-rcc.h
> +
> +properties:
> + compatible:
> + enum:
> + - st,stm32mp25-rcc
> +
> + reg:
> + maxItems: 1
> +
> + '#clock-cells':
> + const: 1
> +
> + '#reset-cells':
> + const: 1
> +
> + clocks:
> + description: Specifies oscillators.
> + maxItems: 5
> +
> + clock-names:
> + items:
> + - const: hse
> + - const: hsi
> + - const: msi
> + - const: lse
> + - const: lsi
No idea what these TLAs are... Define them in clocks:
clocks:
items:
- description: what hse is
- ...
WARNING: multiple messages have this Message-ID (diff)
From: Rob Herring <robh@kernel.org>
To: gabriel.fernandez@foss.st.com
Cc: Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Conor Dooley <conor+dt@kernel.org>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Alexandre Torgue <alexandre.torgue@foss.st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
linux-stm32@st-md-mailman.stormreply.com,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 3/5] dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform
Date: Sun, 19 Nov 2023 09:23:54 -0600 [thread overview]
Message-ID: <20231119152354.GA216405-robh@kernel.org> (raw)
In-Reply-To: <20231116154952.1206705-4-gabriel.fernandez@foss.st.com>
On Thu, Nov 16, 2023 at 04:49:50PM +0100, gabriel.fernandez@foss.st.com wrote:
> From: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
>
> Adds clock and reset binding entries for STM32MP25 SoC family
>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> ---
> .../bindings/clock/st,stm32mp25-rcc.yaml | 72 +++
> include/dt-bindings/clock/st,stm32mp25-rcc.h | 492 ++++++++++++++++++
> include/dt-bindings/reset/st,stm32mp25-rcc.h | 165 ++++++
> 3 files changed, 729 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> create mode 100644 include/dt-bindings/clock/st,stm32mp25-rcc.h
> create mode 100644 include/dt-bindings/reset/st,stm32mp25-rcc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> new file mode 100644
> index 000000000000..1bdcfacd62d5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/st,stm32mp25-rcc.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/st,stm32mp25-rcc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STM32MP25 Reset Clock Controller
> +
> +maintainers:
> + - Gabriel Fernandez <gabriel.fernandez@foss.st.com>
> +
> +description: |
> + The RCC hardware block is both a reset and a clock controller.
> + RCC makes also power management (resume/supend).
> +
> + See also::
> + include/dt-bindings/clock/st,stm32mp25-rcc.h
> + include/dt-bindings/reset/st,stm32mp25-rcc.h
> +
> +properties:
> + compatible:
> + enum:
> + - st,stm32mp25-rcc
> +
> + reg:
> + maxItems: 1
> +
> + '#clock-cells':
> + const: 1
> +
> + '#reset-cells':
> + const: 1
> +
> + clocks:
> + description: Specifies oscillators.
> + maxItems: 5
> +
> + clock-names:
> + items:
> + - const: hse
> + - const: hsi
> + - const: msi
> + - const: lse
> + - const: lsi
No idea what these TLAs are... Define them in clocks:
clocks:
items:
- description: what hse is
- ...
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-11-19 15:23 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-11-16 15:49 [PATCH v2 0/5] Introduce STM32MP257 clock driver gabriel.fernandez
2023-11-16 15:49 ` gabriel.fernandez
2023-11-16 15:49 ` [PATCH v2 1/5] clk: stm32mp1: move stm32mp1 clock driver into stm32 directory gabriel.fernandez
2023-11-16 15:49 ` gabriel.fernandez
2023-11-16 15:49 ` [PATCH v2 2/5] clk: stm32mp1: use stm32mp13 reset driver gabriel.fernandez
2023-11-16 15:49 ` gabriel.fernandez
2023-11-16 15:49 ` [PATCH v2 3/5] dt-bindings: stm32: add clocks and reset binding for stm32mp25 platform gabriel.fernandez
2023-11-16 15:49 ` gabriel.fernandez
2023-11-19 15:23 ` Rob Herring [this message]
2023-11-19 15:23 ` Rob Herring
2023-11-22 13:17 ` Gabriel FERNANDEZ
2023-11-22 13:17 ` Gabriel FERNANDEZ
2023-11-16 15:49 ` [PATCH v2 4/5] clk: stm32: introduce clocks for STM32MP257 platform gabriel.fernandez
2023-11-16 15:49 ` [PATCH v2 5/5] arm64: dts: st: add rcc support in stm32mp251 gabriel.fernandez
2023-11-16 15:49 ` gabriel.fernandez
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231119152354.GA216405-robh@kernel.org \
--to=robh@kernel.org \
--cc=alexandre.torgue@foss.st.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=gabriel.fernandez@foss.st.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-stm32@st-md-mailman.stormreply.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.