All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Seiderer <ps.report@gmx.net>
To: "Gaël PORTAY" <gael.portay@rtone.fr>
Cc: Martin Bark <martin@barkynet.com>,
	Julien Grossholtz <julien.grossholtz@openest.io>,
	buildroot@buildroot.org
Subject: Re: [Buildroot] [PATCH 1/1] board/raspberrypi: fix autoprobing of bluetooth driver
Date: Mon, 20 Nov 2023 23:11:25 +0100	[thread overview]
Message-ID: <20231120231125.2ba705f9@gmx.net> (raw)
In-Reply-To: <20231120214150.671145-1-gael.portay@rtone.fr>

Hello *,

On Mon, 20 Nov 2023 22:41:50 +0100, Gaël PORTAY <gael.portay@rtone.fr> wrote:

> The commit 689b9ac439 (package/rpi-firmware: rework boot/config file
> handling) has split in two the property:
> 
> 	dtoverlay=miniuart-bt,krnbt=on
> 
> Into:
> 
> 	dtoverlay=miniuart-bt
> 	dtoverlay=krnbt=on
> 
> The initial property contained the dtbo file miniuart-bt[1] and its
> parameter krnbt=on[2][3].
> 
> The first syntax is correct while the second is not. The krnbt=on is not
> a dtoverlay[4] but a dtparam[5]. Therefore the property dtparam must be
> used instead.
> 
> This fixes:
> 
> 	# cat /sys/firmware/devicetree/base/chosen/user-warnings
> 	Failed to load overlay 'krnbt=on'
> 
> [1]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
> [2]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts#L91
> [3]: https://github.com/raspberrypi/linux/blob/rpi-5.10.y/arch/arm/boot/dts/overlays/README#L213-L215
> [4]: https://www.raspberrypi.com/documentation/computers/config_txt.html#dtoverlay
> [5]: https://www.raspberrypi.com/documentation/computers/config_txt.html#dtparam
> 
> Signed-off-by: Gaël PORTAY <gael.portay@rtone.fr>
> ---
>  board/raspberrypi/config_0w.txt      | 2 +-
>  board/raspberrypi/config_3.txt       | 2 +-
>  board/raspberrypi/config_3_64bit.txt | 2 +-
>  board/raspberrypi/config_4.txt       | 2 +-
>  board/raspberrypi/config_4_64bit.txt | 2 +-
>  board/raspberrypi/config_zero2w.txt  | 2 +-
>  6 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/board/raspberrypi/config_0w.txt b/board/raspberrypi/config_0w.txt
> index 195bad449e..bc59d5fad2 100644
> --- a/board/raspberrypi/config_0w.txt
> +++ b/board/raspberrypi/config_0w.txt
> @@ -26,4 +26,4 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> diff --git a/board/raspberrypi/config_3.txt b/board/raspberrypi/config_3.txt
> index 195bad449e..bc59d5fad2 100644
> --- a/board/raspberrypi/config_3.txt
> +++ b/board/raspberrypi/config_3.txt
> @@ -26,4 +26,4 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> diff --git a/board/raspberrypi/config_3_64bit.txt b/board/raspberrypi/config_3_64bit.txt
> index 34412fa9e8..6672871125 100644
> --- a/board/raspberrypi/config_3_64bit.txt
> +++ b/board/raspberrypi/config_3_64bit.txt
> @@ -26,7 +26,7 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> 
>  # enable 64bits support
>  arm_64bit=1
> diff --git a/board/raspberrypi/config_4.txt b/board/raspberrypi/config_4.txt
> index ea02d3f071..74a7b270cd 100644
> --- a/board/raspberrypi/config_4.txt
> +++ b/board/raspberrypi/config_4.txt
> @@ -26,4 +26,4 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> diff --git a/board/raspberrypi/config_4_64bit.txt b/board/raspberrypi/config_4_64bit.txt
> index 41c7e97e99..2a9814274f 100644
> --- a/board/raspberrypi/config_4_64bit.txt
> +++ b/board/raspberrypi/config_4_64bit.txt
> @@ -26,7 +26,7 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> 
>  dtoverlay=vc4-kms-v3d-pi4
>  dtoverlay=imx219
> diff --git a/board/raspberrypi/config_zero2w.txt b/board/raspberrypi/config_zero2w.txt
> index 9e6b7f5ccf..55095f64a7 100644
> --- a/board/raspberrypi/config_zero2w.txt
> +++ b/board/raspberrypi/config_zero2w.txt
> @@ -26,4 +26,4 @@ gpu_mem_1024=100
>  dtoverlay=miniuart-bt
> 
>  # enable autoprobing of Bluetooth driver without need of hciattach/btattach
> -dtoverlay=krnbt=on
> +dtparam=krnbt=on
> --
> 2.42.1
> 
> _______________________________________________
> buildroot mailing list
> buildroot@buildroot.org
> https://lists.buildroot.org/mailman/listinfo/buildroot

...alternative patch (removing the failing line) already suggested, see [6] for
details and reasoning...

Regards,
Peter

[6] https://patchwork.ozlabs.org/project/buildroot/patch/20230808180959.28091-2-ps.report@gmx.net/

_______________________________________________
buildroot mailing list
buildroot@buildroot.org
https://lists.buildroot.org/mailman/listinfo/buildroot

  reply	other threads:[~2023-11-20 22:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-11-20 21:41 [Buildroot] [PATCH 1/1] board/raspberrypi: fix autoprobing of bluetooth driver Gaël PORTAY
2023-11-20 22:11 ` Peter Seiderer [this message]
2023-11-27 18:45   ` Yann E. MORIN
2023-11-27 19:44     ` Gaël PORTAY
2023-11-27 18:40 ` Yann E. MORIN
2023-11-30  8:30   ` Peter Korsgaard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231120231125.2ba705f9@gmx.net \
    --to=ps.report@gmx.net \
    --cc=buildroot@buildroot.org \
    --cc=gael.portay@rtone.fr \
    --cc=julien.grossholtz@openest.io \
    --cc=martin@barkynet.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.