[PATCH v4 06/11] ppc/pnv: PNV I2C engines assigned incorrect XSCOM addresses

[Glenn Miles <milesg@linux.vnet.ibm.com>]

The PNV I2C engines for power9 and power10 were being assigned a base
XSCOM address that was off by one I2C engine's address range such
that engine 0 had engine 1's address and so on.  The xscom address
assignment was being based on the device tree engine numbering, which
starts at 1.  Rather than changing the device tree numbering to start
with 0, the addressing was changed to be based on the existing device
tree numbers minus one.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Fixes: 1ceda19c28a1 ("ppc/pnv: Connect PNV I2C controller to powernv10)
Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>
---

No changes from previous version

 hw/ppc/pnv.c     | 6 ++++--
 hw/ppc/pnv_i2c.c | 2 +-
 2 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index 80d25fc1bd..c29a136465 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -1631,7 +1631,8 @@ static void pnv_chip_power9_realize(DeviceState *dev, Error **errp)
             return;
         }
         pnv_xscom_add_subregion(chip, PNV9_XSCOM_I2CM_BASE +
-                               chip9->i2c[i].engine * PNV9_XSCOM_I2CM_SIZE,
+                                (chip9->i2c[i].engine - 1) *
+                                        PNV9_XSCOM_I2CM_SIZE,
                                 &chip9->i2c[i].xscom_regs);
         qdev_connect_gpio_out(DEVICE(&chip9->i2c[i]), 0,
                               qdev_get_gpio_in(DEVICE(&chip9->psi),
@@ -1879,7 +1880,8 @@ static void pnv_chip_power10_realize(DeviceState *dev, Error **errp)
             return;
         }
         pnv_xscom_add_subregion(chip, PNV10_XSCOM_I2CM_BASE +
-                                chip10->i2c[i].engine * PNV10_XSCOM_I2CM_SIZE,
+                                (chip10->i2c[i].engine - 1) *
+                                        PNV10_XSCOM_I2CM_SIZE,
                                 &chip10->i2c[i].xscom_regs);
         qdev_connect_gpio_out(DEVICE(&chip10->i2c[i]), 0,
                               qdev_get_gpio_in(DEVICE(&chip10->psi),
diff --git a/hw/ppc/pnv_i2c.c b/hw/ppc/pnv_i2c.c
index f75e59e709..b2c738da50 100644
--- a/hw/ppc/pnv_i2c.c
+++ b/hw/ppc/pnv_i2c.c
@@ -593,7 +593,7 @@ static int pnv_i2c_dt_xscom(PnvXScomInterface *dev, void *fdt,
     int i2c_offset;
     const char i2c_compat[] = "ibm,power8-i2cm\0ibm,power9-i2cm";
     uint32_t i2c_pcba = PNV9_XSCOM_I2CM_BASE +
-        i2c->engine * PNV9_XSCOM_I2CM_SIZE;
+        (i2c->engine - 1) * PNV9_XSCOM_I2CM_SIZE;
     uint32_t reg[2] = {
         cpu_to_be32(i2c_pcba),
         cpu_to_be32(PNV9_XSCOM_I2CM_SIZE)
-- 
2.31.1