Re: [PATCH v4 10/11] ppc/pnv: Add a pca9554 I2C device to powernv10-rainier

["Cédric Le Goater" <clg@kaod.org>]

On 11/21/23 00:51, Glenn Miles wrote:
> For powernv10-rainier, the Power Hypervisor code expects to see a
> pca9554 device connected to the 3rd PNV I2C engine on port 1 at I2C
> address 0x25 (or left-justified address of 0x4A).  This is used by
> the hypervisor code to detect if a "Cable Card" is present.
> 
> Signed-off-by: Glenn Miles <milesg@linux.vnet.ibm.com>


Reviewed-by: Cédric Le Goater <clg@kaod.org>

Thanks,

C.


> ---
> 
> Changes from previous version:
>    - Code moved from pnv_chip_power10_realize to pnv_rainier_i2c_init
> 
>   hw/misc/Kconfig     | 4 ++++
>   hw/misc/meson.build | 1 +
>   hw/ppc/Kconfig      | 1 +
>   hw/ppc/pnv.c        | 6 ++++++
>   4 files changed, 12 insertions(+)
> 
> diff --git a/hw/misc/Kconfig b/hw/misc/Kconfig
> index cc8a8c1418..c347a132c2 100644
> --- a/hw/misc/Kconfig
> +++ b/hw/misc/Kconfig
> @@ -34,6 +34,10 @@ config PCA9552
>       bool
>       depends on I2C
>   
> +config PCA9554
> +    bool
> +    depends on I2C
> +
>   config I2C_ECHO
>       bool
>       default y if TEST_DEVICES
> diff --git a/hw/misc/meson.build b/hw/misc/meson.build
> index 36c20d5637..c39410e4a7 100644
> --- a/hw/misc/meson.build
> +++ b/hw/misc/meson.build
> @@ -4,6 +4,7 @@ system_ss.add(when: 'CONFIG_FW_CFG_DMA', if_true: files('vmcoreinfo.c'))
>   system_ss.add(when: 'CONFIG_ISA_DEBUG', if_true: files('debugexit.c'))
>   system_ss.add(when: 'CONFIG_ISA_TESTDEV', if_true: files('pc-testdev.c'))
>   system_ss.add(when: 'CONFIG_PCA9552', if_true: files('pca9552.c'))
> +system_ss.add(when: 'CONFIG_PCA9554', if_true: files('pca9554.c'))
>   system_ss.add(when: 'CONFIG_PCI_TESTDEV', if_true: files('pci-testdev.c'))
>   system_ss.add(when: 'CONFIG_UNIMP', if_true: files('unimp.c'))
>   system_ss.add(when: 'CONFIG_EMPTY_SLOT', if_true: files('empty_slot.c'))
> diff --git a/hw/ppc/Kconfig b/hw/ppc/Kconfig
> index f77ca773cf..2302778265 100644
> --- a/hw/ppc/Kconfig
> +++ b/hw/ppc/Kconfig
> @@ -33,6 +33,7 @@ config POWERNV
>       select FDT_PPC
>       select PCI_POWERNV
>       select PCA9552
> +    select PCA9554
>   
>   config PPC405
>       bool
> diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
> index c29a136465..54ebef789e 100644
> --- a/hw/ppc/pnv.c
> +++ b/hw/ppc/pnv.c
> @@ -1918,6 +1918,12 @@ static void pnv_rainier_i2c_init(PnvMachineState *pnv)
>                                 qdev_get_gpio_in(DEVICE(hotplug), 8));
>           qdev_connect_gpio_out(DEVICE(hotplug), 4,
>                                 qdev_get_gpio_in(DEVICE(hotplug), 9));
> +
> +        /*
> +         * Add a PCA9554 I2C device for cable card presence detection
> +         * to engine 2, bus 1, address 0x25
> +         */
> +        i2c_slave_create_simple(chip10->i2c[2].busses[1], "pca9554", 0x25);
>       }
>   }
>