Re: [PATCH v5 4/5] tty: Add SBI debug console support to HVC SBI driver

From: Andrew Jones <ajones@ventanamicro.com>
To: Anup Patel <apatel@ventanamicro.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>,
	 Paul Walmsley <paul.walmsley@sifive.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 Jiri Slaby <jirislaby@kernel.org>,
	Conor Dooley <conor@kernel.org>,
	linux-riscv@lists.infradead.org,  linux-serial@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-kernel@vger.kernel.org,
	 Atish Patra <atishp@rivosinc.com>
Subject: Re: [PATCH v5 4/5] tty: Add SBI debug console support to HVC SBI driver
Date: Fri, 24 Nov 2023 18:31:33 +0100	[thread overview]
Message-ID: <20231124-cf60c92a6a7a2b220feab211@orel> (raw)
In-Reply-To: <20231124070905.1043092-5-apatel@ventanamicro.com>

On Fri, Nov 24, 2023 at 12:39:04PM +0530, Anup Patel wrote:
> From: Atish Patra <atishp@rivosinc.com>
> 
> RISC-V SBI specification supports advanced debug console
> support via SBI DBCN extension.
> 
> Extend the HVC SBI driver to support it.
> 
> Signed-off-by: Atish Patra <atishp@rivosinc.com>
> Signed-off-by: Anup Patel <apatel@ventanamicro.com>
> ---
>  drivers/tty/hvc/Kconfig         |  2 +-
>  drivers/tty/hvc/hvc_riscv_sbi.c | 37 ++++++++++++++++++++++++++-------
>  2 files changed, 31 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/tty/hvc/Kconfig b/drivers/tty/hvc/Kconfig
> index 4f9264d005c0..6e05c5c7bca1 100644
> --- a/drivers/tty/hvc/Kconfig
> +++ b/drivers/tty/hvc/Kconfig
> @@ -108,7 +108,7 @@ config HVC_DCC_SERIALIZE_SMP
>  
>  config HVC_RISCV_SBI
>  	bool "RISC-V SBI console support"
> -	depends on RISCV_SBI_V01
> +	depends on RISCV_SBI
>  	select HVC_DRIVER
>  	help
>  	  This enables support for console output via RISC-V SBI calls, which
> diff --git a/drivers/tty/hvc/hvc_riscv_sbi.c b/drivers/tty/hvc/hvc_riscv_sbi.c
> index 31f53fa77e4a..2f3571f17ecd 100644
> --- a/drivers/tty/hvc/hvc_riscv_sbi.c
> +++ b/drivers/tty/hvc/hvc_riscv_sbi.c
> @@ -39,21 +39,44 @@ static int hvc_sbi_tty_get(uint32_t vtermno, char *buf, int count)
>  	return i;
>  }
>  
> -static const struct hv_ops hvc_sbi_ops = {
> +static const struct hv_ops hvc_sbi_v01_ops = {
>  	.get_chars = hvc_sbi_tty_get,
>  	.put_chars = hvc_sbi_tty_put,
>  };
>  
> -static int __init hvc_sbi_init(void)
> +static int hvc_sbi_dbcn_tty_put(uint32_t vtermno, const char *buf, int count)
>  {
> -	return PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_ops, 16));
> +	return sbi_debug_console_write(buf, count);
>  }
> -device_initcall(hvc_sbi_init);
>  
> -static int __init hvc_sbi_console_init(void)
> +static int hvc_sbi_dbcn_tty_get(uint32_t vtermno, char *buf, int count)
>  {
> -	hvc_instantiate(0, 0, &hvc_sbi_ops);
> +	return sbi_debug_console_read(buf, count);
> +}
> +
> +static const struct hv_ops hvc_sbi_dbcn_ops = {
> +	.put_chars = hvc_sbi_dbcn_tty_put,
> +	.get_chars = hvc_sbi_dbcn_tty_get,
> +};
> +
> +static int __init hvc_sbi_init(void)
> +{
> +	int err;
> +
> +	if (sbi_debug_console_available) {
> +		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_dbcn_ops, 256));
> +		if (err)
> +			return err;
> +		hvc_instantiate(0, 0, &hvc_sbi_dbcn_ops);
> +	} else if (IS_ENABLED(CONFIG_RISCV_SBI_V01)) {
> +		err = PTR_ERR_OR_ZERO(hvc_alloc(0, 0, &hvc_sbi_v01_ops, 256));
> +		if (err)
> +			return err;
> +		hvc_instantiate(0, 0, &hvc_sbi_v01_ops);
> +	} else {
> +		return -ENODEV;
> +	}
>  
>  	return 0;
>  }
> -console_initcall(hvc_sbi_console_init);
> +device_initcall(hvc_sbi_init);
> -- 
> 2.34.1
>

Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv