[PATCH v5 0/2] Use onboard usb hub reset on Odroid N2

[PATCH v5 0/2] Use onboard usb hub reset on Odroid N2

[Anand Moon]

Add new binding for Genesys GL3523
Fix the dt_binding_check error
Fix commit message and peer-hub description
Fix commit message and peer-hub description

Previous:
v1: https://lore.kernel.org/r/20231010032446.3194-1-linux.amoon@gmail.com
v2: https://lore.kernel.org/all/169700589265.2911018.855796610271678067.robh@kernel.org/
v3: https://lore.kernel.org/all/20231119023454.1591-2-linux.amoon@gmail.com/
v4: https://lore.kernel.org/all/20231122182351.63214-2-linux.amoon@gmail.com/

Thanks
-Anand

Anand Moon (2):
  dt-bindings: usb: Add the binding example for the Genesys Logic GL3523
    hub
  arm64: dts: amlogic: Used onboard usb hub reset on odroid n2

 .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
 .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 36 ++++++----
 2 files changed, 85 insertions(+), 16 deletions(-)

-- 
2.42.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.

For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.

[Conor Dooley: upgrade peer-hub description]
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5: upgrade peer-hub description : Conor Dooley
[0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
v4: Fix the description of peer-hub and update the commit message.
Schematics of the Odroid N2+
https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
V3: fix the dt_binding_check error, added new example for Genesys GL3523
v2: added Genesys GL3523 binding
v1: none
---
 .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
 1 file changed, 61 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..499192ea4074 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,12 +24,46 @@ properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+        reset-gpios: true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+        reset-gpios: true
+
 additionalProperties: false
 
 examples:
@@ -49,3 +80,29 @@ examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
-- 
2.42.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Add the binding example for the USB3.1 Genesys Logic GL3523
integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
hub.

For onboard hub controllers that support USB 3.x and USB 2.0 hubs
with shared resets and power supplies, this property is used to identify
the hubs with which these are shared.

[Conor Dooley: upgrade peer-hub description]
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
v5: upgrade peer-hub description : Conor Dooley
[0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
v4: Fix the description of peer-hub and update the commit message.
Schematics of the Odroid N2+
https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
V3: fix the dt_binding_check error, added new example for Genesys GL3523
v2: added Genesys GL3523 binding
v1: none
---
 .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
 1 file changed, 61 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
index ee08b9c3721f..499192ea4074 100644
--- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
+++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
@@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
 maintainers:
   - Icenowy Zheng <uwu@icenowy.me>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
     enum:
@@ -27,12 +24,46 @@ properties:
 
   vdd-supply:
     description:
-      the regulator that provides 3.3V core power to the hub.
+      phandle to the regulator that provides power to the hub.
+
+  peer-hub:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
+      with shared resets and power supplies, this property is used to identify
+      the hubs with which these are shared.
 
 required:
   - compatible
   - reg
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,608
+    then:
+      properties:
+        peer-hub: false
+        vdd-supply: false
+        reset-gpios: true
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - usb5e3,610
+              - usb5e3,620
+    then:
+      properties:
+        peer-hub: true
+        vdd-supply: true
+        reset-gpios: true
+
 additionalProperties: false
 
 examples:
@@ -49,3 +80,29 @@ examples:
             reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
         };
     };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    usb {
+        dr_mode = "host";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* 2.0 hub on port 1 */
+        hub_2_0: hub@1 {
+            compatible = "usb5e3,610";
+            reg = <1>;
+            peer-hub = <&hub_3_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+
+        /* 3.1 hub on port 4 */
+        hub_3_0: hub@2 {
+            compatible = "usb5e3,620";
+            reg = <2>;
+            peer-hub = <&hub_2_0>;
+            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc_5v>;
+        };
+    };
-- 
2.42.0

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 3863 bytes --]

On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> Add the binding example for the USB3.1 Genesys Logic GL3523
> integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> hub.
> 
> For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> with shared resets and power supplies, this property is used to identify
> the hubs with which these are shared.
> 

> [Conor Dooley: upgrade peer-hub description]

This should not be in the commit message. Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v5: upgrade peer-hub description : Conor Dooley
> [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> v4: Fix the description of peer-hub and update the commit message.
> Schematics of the Odroid N2+
> https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> V3: fix the dt_binding_check error, added new example for Genesys GL3523
> v2: added Genesys GL3523 binding
> v1: none
> ---
>  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
>  1 file changed, 61 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> index ee08b9c3721f..499192ea4074 100644
> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
>  maintainers:
>    - Icenowy Zheng <uwu@icenowy.me>
>  
> -allOf:
> -  - $ref: usb-device.yaml#
> -
>  properties:
>    compatible:
>      enum:
> @@ -27,12 +24,46 @@ properties:
>  
>    vdd-supply:
>      description:
> -      the regulator that provides 3.3V core power to the hub.
> +      phandle to the regulator that provides power to the hub.
> +
> +  peer-hub:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> +      with shared resets and power supplies, this property is used to identify
> +      the hubs with which these are shared.
>  
>  required:
>    - compatible
>    - reg
>  
> +allOf:
> +  - $ref: usb-device.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - usb5e3,608
> +    then:
> +      properties:
> +        peer-hub: false
> +        vdd-supply: false
> +        reset-gpios: true
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - usb5e3,610
> +              - usb5e3,620
> +    then:
> +      properties:
> +        peer-hub: true
> +        vdd-supply: true
> +        reset-gpios: true
> +
>  additionalProperties: false
>  
>  examples:
> @@ -49,3 +80,29 @@ examples:
>              reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    usb {
> +        dr_mode = "host";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* 2.0 hub on port 1 */
> +        hub_2_0: hub@1 {
> +            compatible = "usb5e3,610";
> +            reg = <1>;
> +            peer-hub = <&hub_3_0>;
> +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> +            vdd-supply = <&vcc_5v>;
> +        };
> +
> +        /* 3.1 hub on port 4 */
> +        hub_3_0: hub@2 {
> +            compatible = "usb5e3,620";
> +            reg = <2>;
> +            peer-hub = <&hub_2_0>;
> +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> +            vdd-supply = <&vcc_5v>;
> +        };
> +    };
> -- 
> 2.42.0
> 

[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 167 bytes --]

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 3863 bytes --]

On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> Add the binding example for the USB3.1 Genesys Logic GL3523
> integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> hub.
> 
> For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> with shared resets and power supplies, this property is used to identify
> the hubs with which these are shared.
> 

> [Conor Dooley: upgrade peer-hub description]

This should not be in the commit message. Otherwise,
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.

> Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> ---
> v5: upgrade peer-hub description : Conor Dooley
> [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> v4: Fix the description of peer-hub and update the commit message.
> Schematics of the Odroid N2+
> https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> V3: fix the dt_binding_check error, added new example for Genesys GL3523
> v2: added Genesys GL3523 binding
> v1: none
> ---
>  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
>  1 file changed, 61 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> index ee08b9c3721f..499192ea4074 100644
> --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
>  maintainers:
>    - Icenowy Zheng <uwu@icenowy.me>
>  
> -allOf:
> -  - $ref: usb-device.yaml#
> -
>  properties:
>    compatible:
>      enum:
> @@ -27,12 +24,46 @@ properties:
>  
>    vdd-supply:
>      description:
> -      the regulator that provides 3.3V core power to the hub.
> +      phandle to the regulator that provides power to the hub.
> +
> +  peer-hub:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> +      with shared resets and power supplies, this property is used to identify
> +      the hubs with which these are shared.
>  
>  required:
>    - compatible
>    - reg
>  
> +allOf:
> +  - $ref: usb-device.yaml#
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - usb5e3,608
> +    then:
> +      properties:
> +        peer-hub: false
> +        vdd-supply: false
> +        reset-gpios: true
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - usb5e3,610
> +              - usb5e3,620
> +    then:
> +      properties:
> +        peer-hub: true
> +        vdd-supply: true
> +        reset-gpios: true
> +
>  additionalProperties: false
>  
>  examples:
> @@ -49,3 +80,29 @@ examples:
>              reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
>          };
>      };
> +
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +    usb {
> +        dr_mode = "host";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        /* 2.0 hub on port 1 */
> +        hub_2_0: hub@1 {
> +            compatible = "usb5e3,610";
> +            reg = <1>;
> +            peer-hub = <&hub_3_0>;
> +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> +            vdd-supply = <&vcc_5v>;
> +        };
> +
> +        /* 3.1 hub on port 4 */
> +        hub_3_0: hub@2 {
> +            compatible = "usb5e3,620";
> +            reg = <2>;
> +            peer-hub = <&hub_2_0>;
> +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> +            vdd-supply = <&vcc_5v>;
> +        };
> +    };
> -- 
> 2.42.0
> 

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Conor Dooley]

[-- Attachment #1.1: Type: text/plain, Size: 4316 bytes --]

On Thu, Nov 30, 2023 at 03:16:33PM +0000, Conor Dooley wrote:
> On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> > Add the binding example for the USB3.1 Genesys Logic GL3523
> > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > hub.
> > 
> > For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > with shared resets and power supplies, this property is used to identify
> > the hubs with which these are shared.
> > 
> 
> > [Conor Dooley: upgrade peer-hub description]
> 
> This should not be in the commit message. Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> 
> Cheers,
> Conor.
> 
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > v5: upgrade peer-hub description : Conor Dooley
> > [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> > v4: Fix the description of peer-hub and update the commit message.
> > Schematics of the Odroid N2+
> > https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> > V3: fix the dt_binding_check error, added new example for Genesys GL3523
> > v2: added Genesys GL3523 binding
> > v1: none
> > ---
> >  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> >  1 file changed, 61 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > index ee08b9c3721f..499192ea4074 100644
> > --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> >  maintainers:
> >    - Icenowy Zheng <uwu@icenowy.me>
> >  
> > -allOf:
> > -  - $ref: usb-device.yaml#
> > -
> >  properties:
> >    compatible:
> >      enum:
> > @@ -27,12 +24,46 @@ properties:
> >  
> >    vdd-supply:
> >      description:
> > -      the regulator that provides 3.3V core power to the hub.
> > +      phandle to the regulator that provides power to the hub.

Wait, why is this text changing? I don't see it mentioned anywhere why
this is no longer specifically 3.3v

Thanks,
Conor.

> > +
> > +  peer-hub:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > +      with shared resets and power supplies, this property is used to identify
> > +      the hubs with which these are shared.
> >  
> >  required:
> >    - compatible
> >    - reg
> >  
> > +allOf:
> > +  - $ref: usb-device.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,608
> > +    then:
> > +      properties:
> > +        peer-hub: false
> > +        vdd-supply: false
> > +        reset-gpios: true
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,610
> > +              - usb5e3,620
> > +    then:
> > +      properties:
> > +        peer-hub: true
> > +        vdd-supply: true
> > +        reset-gpios: true
> > +
> >  additionalProperties: false
> >  
> >  examples:
> > @@ -49,3 +80,29 @@ examples:
> >              reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
> >          };
> >      };
> > +
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    usb {
> > +        dr_mode = "host";
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        /* 2.0 hub on port 1 */
> > +        hub_2_0: hub@1 {
> > +            compatible = "usb5e3,610";
> > +            reg = <1>;
> > +            peer-hub = <&hub_3_0>;
> > +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> > +            vdd-supply = <&vcc_5v>;
> > +        };
> > +
> > +        /* 3.1 hub on port 4 */
> > +        hub_3_0: hub@2 {
> > +            compatible = "usb5e3,620";
> > +            reg = <2>;
> > +            peer-hub = <&hub_2_0>;
> > +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> > +            vdd-supply = <&vcc_5v>;
> > +        };
> > +    };
> > -- 
> > 2.42.0
> > 



[-- Attachment #1.2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

[-- Attachment #2: Type: text/plain, Size: 167 bytes --]

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Conor Dooley]

[-- Attachment #1: Type: text/plain, Size: 4316 bytes --]

On Thu, Nov 30, 2023 at 03:16:33PM +0000, Conor Dooley wrote:
> On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> > Add the binding example for the USB3.1 Genesys Logic GL3523
> > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > hub.
> > 
> > For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > with shared resets and power supplies, this property is used to identify
> > the hubs with which these are shared.
> > 
> 
> > [Conor Dooley: upgrade peer-hub description]
> 
> This should not be in the commit message. Otherwise,
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> 
> Cheers,
> Conor.
> 
> > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > ---
> > v5: upgrade peer-hub description : Conor Dooley
> > [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> > v4: Fix the description of peer-hub and update the commit message.
> > Schematics of the Odroid N2+
> > https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> > V3: fix the dt_binding_check error, added new example for Genesys GL3523
> > v2: added Genesys GL3523 binding
> > v1: none
> > ---
> >  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> >  1 file changed, 61 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > index ee08b9c3721f..499192ea4074 100644
> > --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> >  maintainers:
> >    - Icenowy Zheng <uwu@icenowy.me>
> >  
> > -allOf:
> > -  - $ref: usb-device.yaml#
> > -
> >  properties:
> >    compatible:
> >      enum:
> > @@ -27,12 +24,46 @@ properties:
> >  
> >    vdd-supply:
> >      description:
> > -      the regulator that provides 3.3V core power to the hub.
> > +      phandle to the regulator that provides power to the hub.

Wait, why is this text changing? I don't see it mentioned anywhere why
this is no longer specifically 3.3v

Thanks,
Conor.

> > +
> > +  peer-hub:
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +    description:
> > +      For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > +      with shared resets and power supplies, this property is used to identify
> > +      the hubs with which these are shared.
> >  
> >  required:
> >    - compatible
> >    - reg
> >  
> > +allOf:
> > +  - $ref: usb-device.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,608
> > +    then:
> > +      properties:
> > +        peer-hub: false
> > +        vdd-supply: false
> > +        reset-gpios: true
> > +
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            enum:
> > +              - usb5e3,610
> > +              - usb5e3,620
> > +    then:
> > +      properties:
> > +        peer-hub: true
> > +        vdd-supply: true
> > +        reset-gpios: true
> > +
> >  additionalProperties: false
> >  
> >  examples:
> > @@ -49,3 +80,29 @@ examples:
> >              reset-gpios = <&pio 7 2 GPIO_ACTIVE_LOW>;
> >          };
> >      };
> > +
> > +  - |
> > +    #include <dt-bindings/gpio/gpio.h>
> > +    usb {
> > +        dr_mode = "host";
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        /* 2.0 hub on port 1 */
> > +        hub_2_0: hub@1 {
> > +            compatible = "usb5e3,610";
> > +            reg = <1>;
> > +            peer-hub = <&hub_3_0>;
> > +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> > +            vdd-supply = <&vcc_5v>;
> > +        };
> > +
> > +        /* 3.1 hub on port 4 */
> > +        hub_3_0: hub@2 {
> > +            compatible = "usb5e3,620";
> > +            reg = <2>;
> > +            peer-hub = <&hub_2_0>;
> > +            reset-gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
> > +            vdd-supply = <&vcc_5v>;
> > +        };
> > +    };
> > -- 
> > 2.42.0
> > 



[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 228 bytes --]

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Hi Conor,

On Thu, 30 Nov 2023 at 20:52, Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, Nov 30, 2023 at 03:16:33PM +0000, Conor Dooley wrote:
> > On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> > > Add the binding example for the USB3.1 Genesys Logic GL3523
> > > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > > hub.
> > >
> > > For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > > with shared resets and power supplies, this property is used to identify
> > > the hubs with which these are shared.
> > >
> >
> > > [Conor Dooley: upgrade peer-hub description]
> >
ok
> > This should not be in the commit message. Otherwise,
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> >
> > Cheers,
> > Conor.
> >
> > > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > > ---
> > > v5: upgrade peer-hub description : Conor Dooley
> > > [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> > > v4: Fix the description of peer-hub and update the commit message.
> > > Schematics of the Odroid N2+
> > > https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> > > V3: fix the dt_binding_check error, added new example for Genesys GL3523
> > > v2: added Genesys GL3523 binding
> > > v1: none
> > > ---
> > >  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> > >  1 file changed, 61 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > index ee08b9c3721f..499192ea4074 100644
> > > --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> > >  maintainers:
> > >    - Icenowy Zheng <uwu@icenowy.me>
> > >
> > > -allOf:
> > > -  - $ref: usb-device.yaml#
> > > -
> > >  properties:
> > >    compatible:
> > >      enum:
> > > @@ -27,12 +24,46 @@ properties:
> > >
> > >    vdd-supply:
> > >      description:
> > > -      the regulator that provides 3.3V core power to the hub.
> > > +      phandle to the regulator that provides power to the hub.
>
> Wait, why is this text changing? I don't see it mentioned anywhere why
> this is no longer specifically 3.3v
>
GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which saves
customers’ BOM cost, and eases for PCB design.

Do I have to update this in the commit message? or leave this original.

> Thanks,
> Conor.
>
Thanks
-Anand

_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

Re: [PATCH v5 1/2] dt-bindings: usb: Add the binding example for the Genesys Logic GL3523 hub

[Anand Moon]

Hi Conor,

On Thu, 30 Nov 2023 at 20:52, Conor Dooley <conor@kernel.org> wrote:
>
> On Thu, Nov 30, 2023 at 03:16:33PM +0000, Conor Dooley wrote:
> > On Thu, Nov 30, 2023 at 11:01:26AM +0530, Anand Moon wrote:
> > > Add the binding example for the USB3.1 Genesys Logic GL3523
> > > integrates with USB 3.1 Gen 1 Super Speed and USB 2.0 High-Speed
> > > hub.
> > >
> > > For onboard hub controllers that support USB 3.x and USB 2.0 hubs
> > > with shared resets and power supplies, this property is used to identify
> > > the hubs with which these are shared.
> > >
> >
> > > [Conor Dooley: upgrade peer-hub description]
> >
ok
> > This should not be in the commit message. Otherwise,
> > Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
> >
> > Cheers,
> > Conor.
> >
> > > Signed-off-by: Anand Moon <linux.amoon@gmail.com>
> > > ---
> > > v5: upgrade peer-hub description : Conor Dooley
> > > [0] https://www.genesyslogic.com.tw/en/product_view.php?show=67 [Block Diagram]
> > > v4: Fix the description of peer-hub and update the commit message.
> > > Schematics of the Odroid N2+
> > > https://dn.odroid.com/S922X/ODROID-N2/Schematic/odroid-n2_rev0.6_20210121.pdf
> > > V3: fix the dt_binding_check error, added new example for Genesys GL3523
> > > v2: added Genesys GL3523 binding
> > > v1: none
> > > ---
> > >  .../bindings/usb/genesys,gl850g.yaml          | 65 +++++++++++++++++--
> > >  1 file changed, 61 insertions(+), 4 deletions(-)
> > >
> > > diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > index ee08b9c3721f..499192ea4074 100644
> > > --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml
> > > @@ -9,9 +9,6 @@ title: Genesys Logic USB hub controller
> > >  maintainers:
> > >    - Icenowy Zheng <uwu@icenowy.me>
> > >
> > > -allOf:
> > > -  - $ref: usb-device.yaml#
> > > -
> > >  properties:
> > >    compatible:
> > >      enum:
> > > @@ -27,12 +24,46 @@ properties:
> > >
> > >    vdd-supply:
> > >      description:
> > > -      the regulator that provides 3.3V core power to the hub.
> > > +      phandle to the regulator that provides power to the hub.
>
> Wait, why is this text changing? I don't see it mentioned anywhere why
> this is no longer specifically 3.3v
>
GL3523 has built-in 5V to 3.3V and 5V to 1.2V regulators, which saves
customers’ BOM cost, and eases for PCB design.

Do I have to update this in the commit message? or leave this original.

> Thanks,
> Conor.
>
Thanks
-Anand

[PATCH v5 2/2] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2

[Anand Moon]

On Odroid n2/n2+ previously use gpio-hog to reset the usb hub,
switch to used on-board usb hub reset to enable the usb hub
and enable power to hub.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 36 ++++++++++++-------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 91c9769fda20..9e671444eca6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -31,6 +31,30 @@ hub_5v: regulator-hub_5v {
 		enable-active-high;
 	};
 
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
+
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
@@ -234,18 +258,6 @@ &gpio {
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub-hog {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &i2c3 {
-- 
2.42.0


_______________________________________________
linux-amlogic mailing list
linux-amlogic@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-amlogic

[PATCH v5 2/2] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2

[Anand Moon]

On Odroid n2/n2+ previously use gpio-hog to reset the usb hub,
switch to used on-board usb hub reset to enable the usb hub
and enable power to hub.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 36 ++++++++++++-------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 91c9769fda20..9e671444eca6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -31,6 +31,30 @@ hub_5v: regulator-hub_5v {
 		enable-active-high;
 	};
 
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
+
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
@@ -234,18 +258,6 @@ &gpio {
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub-hog {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &i2c3 {
-- 
2.42.0

[PATCH v5 2/2] arm64: dts: amlogic: Used onboard usb hub reset on odroid n2

[Anand Moon]

On Odroid n2/n2+ previously use gpio-hog to reset the usb hub,
switch to used on-board usb hub reset to enable the usb hub
and enable power to hub.

Signed-off-by: Anand Moon <linux.amoon@gmail.com>
---
 .../dts/amlogic/meson-g12b-odroid-n2.dtsi     | 36 ++++++++++++-------
 1 file changed, 24 insertions(+), 12 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 91c9769fda20..9e671444eca6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -31,6 +31,30 @@ hub_5v: regulator-hub_5v {
 		enable-active-high;
 	};
 
+	/* USB hub supports both USB 2.0 and USB 3.0 root hub */
+	usb-hub {
+		dr_mode = "host";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* 2.0 hub on port 1 */
+		hub_2_0: hub@1 {
+			compatible = "usb5e3,610";
+			reg = <1>;
+			peer-hub = <&hub_3_0>;
+			vdd-supply = <&usb_pwr_en>;
+		};
+
+		/* 3.0 hub on port 4 */
+		hub_3_0: hub@2 {
+			compatible = "usb5e3,620";
+			reg = <2>;
+			peer-hub = <&hub_2_0>;
+			reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
+			vdd-supply = <&vcc_5v>;
+		};
+	};
+
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "ODROID-N2";
@@ -234,18 +258,6 @@ &gpio {
 		"PIN_3",  /* GPIOX_17 */
 		"PIN_5",  /* GPIOX_18 */
 		"PIN_36"; /* GPIOX_19 */
-	/*
-	 * WARNING: The USB Hub on the Odroid-N2 needs a reset signal
-	 * to be turned high in order to be detected by the USB Controller
-	 * This signal should be handled by a USB specific power sequence
-	 * in order to reset the Hub when USB bus is powered down.
-	 */
-	usb-hub-hog {
-		gpio-hog;
-		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
-		output-high;
-		line-name = "usb-hub-reset";
-	};
 };
 
 &i2c3 {
-- 
2.42.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel