All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kory Maincent <kory.maincent@bootlin.com>
To: "David S. Miller" <davem@davemloft.net>,
	 Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	 Paolo Abeni <pabeni@redhat.com>,
	Jonathan Corbet <corbet@lwn.net>,
	 Luis Chamberlain <mcgrof@kernel.org>,
	Russ Weight <russ.weight@linux.dev>,
	 Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	 "Rafael J. Wysocki" <rafael@kernel.org>,
	Rob Herring <robh+dt@kernel.org>,
	 Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>,
	netdev@vger.kernel.org,  linux-kernel@vger.kernel.org,
	linux-doc@vger.kernel.org,  devicetree@vger.kernel.org,
	Dent Project <dentproject@linuxfoundation.org>,
	 Kory Maincent <kory.maincent@bootlin.com>
Subject: [PATCH net-next v2 4/8] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface
Date: Fri, 01 Dec 2023 18:10:26 +0100	[thread overview]
Message-ID: <20231201-feature_poe-v2-4-56d8cac607fa@bootlin.com> (raw)
In-Reply-To: <20231201-feature_poe-v2-0-56d8cac607fa@bootlin.com>

Add PSE PoE interface support in the ethtool pse command.

Sponsored-by: Dent Project <dentproject@linuxfoundation.org>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
---

Changes in v2:
- Follow the "c33" PoE prefix naming change.
---
 Documentation/networking/ethtool-netlink.rst | 20 +++++++++
 net/ethtool/pse-pd.c                         | 64 +++++++++++++++++++++++-----
 2 files changed, 74 insertions(+), 10 deletions(-)

diff --git a/Documentation/networking/ethtool-netlink.rst b/Documentation/networking/ethtool-netlink.rst
index 2540c70952ff..e02a7dabc673 100644
--- a/Documentation/networking/ethtool-netlink.rst
+++ b/Documentation/networking/ethtool-netlink.rst
@@ -1711,6 +1711,10 @@ Kernel response contents:
                                                   PSE functions
   ``ETHTOOL_A_PODL_PSE_PW_D_STATUS``         u32  power detection status of the
                                                   PoDL PSE.
+  ``ETHTOOL_A_C33_PSE_ADMIN_STATE``          u32  Operational state of the PoE
+                                                  PSE functions.
+  ``ETHTOOL_A_C33_PSE_PW_D_STATUS``          u32  power detection status of the
+                                                  PoE PSE.
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` attribute identifies
@@ -1722,6 +1726,12 @@ aPoDLPSEAdminState. Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_admin_state
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_STATE`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.2 aPSEAdminState.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_admin_state
+
 When set, the optional ``ETHTOOL_A_PODL_PSE_PW_D_STATUS`` attribute identifies
 the power detection status of the PoDL PSE.  The status depend on internal PSE
 state machine and automatic PD classification support. This option is
@@ -1731,6 +1741,12 @@ Possible values are:
 .. kernel-doc:: include/uapi/linux/ethtool.h
     :identifiers: ethtool_podl_pse_pw_d_status
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_PW_D_STATUS`` implementing
+``IEEE 802.3-2022`` 30.9.1.1.5 aPSEPowerDetectionStatus.
+
+.. kernel-doc:: include/uapi/linux/ethtool.h
+    :identifiers: ethtool_c33_pse_pw_d_status
+
 PSE_SET
 =======
 
@@ -1741,6 +1757,7 @@ Request contents:
   ======================================  ======  =============================
   ``ETHTOOL_A_PSE_HEADER``                nested  request header
   ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL``       u32  Control PoDL PSE Admin state
+  ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL``            u32  Control PSE Admin state
   ======================================  ======  =============================
 
 When set, the optional ``ETHTOOL_A_PODL_PSE_ADMIN_CONTROL`` attribute is used
@@ -1748,6 +1765,9 @@ to control PoDL PSE Admin functions. This option is implementing
 ``IEEE 802.3-2018`` 30.15.1.2.1 acPoDLPSEAdminControl. See
 ``ETHTOOL_A_PODL_PSE_ADMIN_STATE`` for supported values.
 
+The same goes for ``ETHTOOL_A_C33_PSE_ADMIN_CONTROL`` implementing
+``IEEE 802.3-2022`` 30.9.1.2.1 acPSEAdminControl.
+
 RSS_GET
 =======
 
diff --git a/net/ethtool/pse-pd.c b/net/ethtool/pse-pd.c
index aef57a058f0d..7a98dc029c4f 100644
--- a/net/ethtool/pse-pd.c
+++ b/net/ethtool/pse-pd.c
@@ -82,6 +82,10 @@ static int pse_reply_size(const struct ethnl_req_info *req_base,
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_ADMIN_STATE */
 	if (st->podl_pw_status > 0)
 		len += nla_total_size(sizeof(u32)); /* _PODL_PSE_PW_D_STATUS */
+	if (st->c33_admin_state > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_ADMIN_STATE */
+	if (st->c33_pw_status > 0)
+		len += nla_total_size(sizeof(u32)); /* _C33_PSE_PW_D_STATUS */
 
 	return len;
 }
@@ -103,6 +107,16 @@ static int pse_fill_reply(struct sk_buff *skb,
 			st->podl_pw_status))
 		return -EMSGSIZE;
 
+	if (st->c33_admin_state > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_ADMIN_STATE,
+			st->c33_admin_state))
+		return -EMSGSIZE;
+
+	if (st->c33_pw_status > 0 &&
+	    nla_put_u32(skb, ETHTOOL_A_C33_PSE_PW_D_STATUS,
+			st->c33_pw_status))
+		return -EMSGSIZE;
+
 	return 0;
 }
 
@@ -113,25 +127,18 @@ const struct nla_policy ethnl_pse_set_policy[ETHTOOL_A_PSE_MAX + 1] = {
 	[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] =
 		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_PODL_PSE_ADMIN_STATE_DISABLED,
 				 ETHTOOL_PODL_PSE_ADMIN_STATE_ENABLED),
+	[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] =
+		NLA_POLICY_RANGE(NLA_U32, ETHTOOL_C33_PSE_ADMIN_STATE_DISABLED,
+				 ETHTOOL_C33_PSE_ADMIN_STATE_ENABLED),
 };
 
 static int
 ethnl_set_pse_validate(struct ethnl_req_info *req_info, struct genl_info *info)
-{
-	return !!info->attrs[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL];
-}
-
-static int
-ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 {
 	struct net_device *dev = req_info->dev;
-	struct pse_control_config config = {};
 	struct nlattr **tb = info->attrs;
 	struct phy_device *phydev;
 
-	/* this values are already validated by the ethnl_pse_set_policy */
-	config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
-
 	phydev = dev->phydev;
 	if (!phydev) {
 		NL_SET_ERR_MSG(info->extack, "No PHY is attached");
@@ -143,6 +150,43 @@ ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
 		return -EOPNOTSUPP;
 	}
 
+	if (!tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+	    !tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL])
+		return 0;
+
+	if (tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL] &&
+	    !(pse_get_types(phydev->psec) & PSE_PODL)) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL],
+				    "setting PSE PoDL admin control not supported");
+		return -EOPNOTSUPP;
+	}
+	if (tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL] &&
+	    !(pse_get_types(phydev->psec) & PSE_C33)) {
+		NL_SET_ERR_MSG_ATTR(info->extack,
+				    tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL],
+				    "setting PSE PoE admin control not supported");
+		return -EOPNOTSUPP;
+	}
+
+	return 1;
+}
+
+static int
+ethnl_set_pse(struct ethnl_req_info *req_info, struct genl_info *info)
+{
+	struct net_device *dev = req_info->dev;
+	struct pse_control_config config = {};
+	struct nlattr **tb = info->attrs;
+	struct phy_device *phydev;
+
+	phydev = dev->phydev;
+	/* These values are already validated by the ethnl_pse_set_policy */
+	if (pse_get_types(phydev->psec) & PSE_PODL)
+		config.podl_admin_control = nla_get_u32(tb[ETHTOOL_A_PODL_PSE_ADMIN_CONTROL]);
+	if (pse_get_types(phydev->psec) & PSE_C33)
+		config.c33_admin_control = nla_get_u32(tb[ETHTOOL_A_C33_PSE_ADMIN_CONTROL]);
+
 	/* Return errno directly - PSE has no notification */
 	return pse_ethtool_set_config(phydev->psec, info->extack, &config);
 }

-- 
2.25.1


  parent reply	other threads:[~2023-12-01 17:11 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-01 17:10 [PATCH net-next v2 0/8] net: Add support for Power over Ethernet (PoE) Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 1/8] net: pse-pd: Rectify and adapt the naming of admin_cotrol member of struct pse_control_config Kory Maincent
2023-12-03 18:19   ` Andrew Lunn
2023-12-04 12:19   ` Oleksij Rempel
2023-12-01 17:10 ` [PATCH net-next v2 2/8] ethtool: Expand Ethernet Power Equipment with c33 (PoE) alongside PoDL Kory Maincent
2023-12-03 18:27   ` Andrew Lunn
2023-12-04 12:27   ` Oleksij Rempel
2023-12-06  2:45   ` Bagas Sanjaya
2023-12-06  8:35     ` Köry Maincent
2023-12-06  4:23   ` kernel test robot
2023-12-01 17:10 ` [PATCH net-next v2 3/8] net: pse-pd: Introduce PSE types enumeration Kory Maincent
2023-12-03 18:31   ` Andrew Lunn
2023-12-04 12:43     ` Oleksij Rempel
2023-12-03 18:38   ` Andrew Lunn
2023-12-04 14:00     ` Köry Maincent
2023-12-04 12:51   ` Oleksij Rempel
2023-12-04 13:55     ` Köry Maincent
2023-12-01 17:10 ` Kory Maincent [this message]
2023-12-03 18:45   ` [PATCH net-next v2 4/8] net: ethtool: pse-pd: Expand pse commands with the PSE PoE interface Andrew Lunn
2023-12-04 15:28     ` Köry Maincent
2023-12-04 15:29     ` Oleksij Rempel
2023-12-06  4:18   ` Bagas Sanjaya
2023-12-01 17:10 ` [PATCH net-next v2 5/8] netlink: specs: Modify pse attribute prefix Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 6/8] netlink: specs: Expand the pse netlink command with PoE interface Kory Maincent
2023-12-01 17:10 ` [PATCH net-next v2 7/8] dt-bindings: net: pse-pd: Add bindings for PD692x0 PSE controller Kory Maincent
2023-12-04 23:08   ` Oleksij Rempel
2023-12-05  6:36     ` Oleksij Rempel
2023-12-05 10:15       ` Köry Maincent
2023-12-05 13:31         ` Köry Maincent
2023-12-05 14:21           ` Oleksij Rempel
2023-12-05 15:23             ` Köry Maincent
2023-12-08  9:06               ` Köry Maincent
2023-12-05 12:54       ` Mark Brown
2023-12-01 17:10 ` [PATCH net-next v2 8/8] net: pse-pd: Add PD692x0 PSE controller driver Kory Maincent
2023-12-03 19:34   ` Andrew Lunn
2024-01-16  9:49     ` Köry Maincent
2024-01-16 13:18       ` Andrew Lunn
2024-01-16 14:12         ` Köry Maincent
2023-12-03 21:11   ` Christophe JAILLET
2023-12-04 22:16     ` Köry Maincent
2023-12-05 18:01       ` Christophe JAILLET
2023-12-06  8:41         ` Köry Maincent
2023-12-04 22:59   ` Oleksij Rempel
2023-12-05  6:45     ` Oleksij Rempel
2023-12-05 12:55       ` Mark Brown
2023-12-05 14:02         ` Oleksij Rempel
2023-12-05 15:57           ` Mark Brown
2023-12-21 15:36             ` Köry Maincent
2023-12-21 15:43               ` Mark Brown
2023-12-21 16:10                 ` Köry Maincent
2023-12-21 16:20                   ` Mark Brown
2023-12-21 17:19                     ` Köry Maincent
2023-12-21 17:34                       ` Mark Brown
2023-12-21 17:42                     ` Oleksij Rempel
2023-12-21 18:05                       ` Mark Brown
2023-12-22  7:54                         ` Oleksij Rempel
2023-12-05 21:35   ` kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231201-feature_poe-v2-4-56d8cac607fa@bootlin.com \
    --to=kory.maincent@bootlin.com \
    --cc=conor+dt@kernel.org \
    --cc=corbet@lwn.net \
    --cc=davem@davemloft.net \
    --cc=dentproject@linuxfoundation.org \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mcgrof@kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=o.rempel@pengutronix.de \
    --cc=pabeni@redhat.com \
    --cc=rafael@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=russ.weight@linux.dev \
    --cc=thomas.petazzoni@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.