From: Renze Nicolai <renze@rnplus.nl>
To: linux-aspeed@lists.ozlabs.org
Subject: [PATCH v3 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
Date: Sat, 2 Dec 2023 01:38:45 +0100 [thread overview]
Message-ID: <20231202003908.3635695-3-renze@rnplus.nl> (raw)
In-Reply-To: <20231202003908.3635695-1-renze@rnplus.nl>
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series
micro-ATX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as serial console, KVM support
and POST code snooping.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 377 ++++++++++++++++++
2 files changed, 378 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e316d0..2205bd079d0c 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
+ aspeed-bmc-asrock-x570d4u.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..3c975bc41ae7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Asrock Rack X570D4U BMC";
+ compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c40 = &i2c4mux0ch0;
+ i2c41 = &i2c4mux0ch1;
+ i2c42 = &i2c4mux0ch2;
+ i2c43 = &i2c4mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory at 80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pci_memory: region at 9a000000 {
+ no-map;
+ reg = <0x9a000000 0x00010000>; /* 64K */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02800000>; /* 40M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* led-heartbeat-n */
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "timer";
+ };
+
+ led-1 {
+ /* led-fault-n */
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton", "",
+ /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
+ /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "", "", "", "",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "", "", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
+};
+
+&fmc {
+ status = "okay";
+ flash at 0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+ use-ncsi;
+
+ nvmem-cells = <ð1_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ /* SMBus on auxiliary panel header (AUX_PANEL1) */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ w83773g at 4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ /* PSU SMBus (PSU_SMB1) */
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux at 70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4mux0ch0: i2c at 0 {
+ /* SMBus on PCI express 16x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c4mux0ch1: i2c at 1 {
+ /* SMBus on PCI express 8x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c4mux0ch2: i2c at 2 {
+ /* Unknown */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c4mux0ch3: i2c at 3 {
+ /* SMBus on PCI express 1x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c7 {
+ /* FRU and SPD EEPROM SMBus */
+ status = "okay";
+
+ eeprom at 57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress at 3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress at 3f88 {
+ reg = <0x3f88 6>;
+ };
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&pci_memory>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default>;
+
+ fan at 0 {
+ /* FAN1 (4-pin) */
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan at 1 {
+ /* FAN2 (4-pin) */
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan at 2 {
+ /* FAN3 (4-pin) */
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan at 3 {
+ /* FAN4 (6-pin) */
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+ };
+
+ fan at 4 {
+ /* FAN6 (6-pin) */
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+ };
+
+ fan at 5 {
+ /* FAN5 (6-pin) */
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Renze Nicolai <renze@rnplus.nl>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
arnd@arndb.de, olof@lixom.net, soc@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
joel@jms.id.au, andrew@aj.id.au, renze@rnplus.nl
Subject: [PATCH v3 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
Date: Sat, 2 Dec 2023 01:38:45 +0100 [thread overview]
Message-ID: <20231202003908.3635695-3-renze@rnplus.nl> (raw)
In-Reply-To: <20231202003908.3635695-1-renze@rnplus.nl>
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series
micro-ATX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as serial console, KVM support
and POST code snooping.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 377 ++++++++++++++++++
2 files changed, 378 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e316d0..2205bd079d0c 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
+ aspeed-bmc-asrock-x570d4u.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..3c975bc41ae7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Asrock Rack X570D4U BMC";
+ compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c40 = &i2c4mux0ch0;
+ i2c41 = &i2c4mux0ch1;
+ i2c42 = &i2c4mux0ch2;
+ i2c43 = &i2c4mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pci_memory: region@9a000000 {
+ no-map;
+ reg = <0x9a000000 0x00010000>; /* 64K */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02800000>; /* 40M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* led-heartbeat-n */
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "timer";
+ };
+
+ led-1 {
+ /* led-fault-n */
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton", "",
+ /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
+ /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "", "", "", "",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "", "", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+ use-ncsi;
+
+ nvmem-cells = <ð1_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ /* SMBus on auxiliary panel header (AUX_PANEL1) */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ /* PSU SMBus (PSU_SMB1) */
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4mux0ch0: i2c@0 {
+ /* SMBus on PCI express 16x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c4mux0ch1: i2c@1 {
+ /* SMBus on PCI express 8x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c4mux0ch2: i2c@2 {
+ /* Unknown */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c4mux0ch3: i2c@3 {
+ /* SMBus on PCI express 1x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c7 {
+ /* FRU and SPD EEPROM SMBus */
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress@3f88 {
+ reg = <0x3f88 6>;
+ };
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&pci_memory>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default>;
+
+ fan@0 {
+ /* FAN1 (4-pin) */
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ /* FAN2 (4-pin) */
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ /* FAN3 (4-pin) */
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ /* FAN4 (6-pin) */
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+ };
+
+ fan@4 {
+ /* FAN6 (6-pin) */
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+ };
+
+ fan@5 {
+ /* FAN5 (6-pin) */
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Renze Nicolai <renze@rnplus.nl>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-aspeed@lists.ozlabs.org,
arnd@arndb.de, olof@lixom.net, soc@kernel.org,
robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
joel@jms.id.au, andrew@aj.id.au, renze@rnplus.nl
Subject: [PATCH v3 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC
Date: Sat, 2 Dec 2023 01:38:45 +0100 [thread overview]
Message-ID: <20231202003908.3635695-3-renze@rnplus.nl> (raw)
In-Reply-To: <20231202003908.3635695-1-renze@rnplus.nl>
This is a relatively low-cost AST2500-based Amd Ryzen 5000 Series
micro-ATX board that we hope can provide a decent platform for OpenBMC
development.
This initial device-tree provides the necessary configuration for
basic BMC functionality such as serial console, KVM support
and POST code snooping.
Signed-off-by: Renze Nicolai <renze@rnplus.nl>
---
arch/arm/boot/dts/aspeed/Makefile | 1 +
.../dts/aspeed/aspeed-bmc-asrock-x570d4u.dts | 377 ++++++++++++++++++
2 files changed, 378 insertions(+)
create mode 100644 arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index d3ac20e316d0..2205bd079d0c 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-bmc-arm-stardragon4800-rep2.dtb \
aspeed-bmc-asrock-e3c246d4i.dtb \
aspeed-bmc-asrock-romed8hm3.dtb \
+ aspeed-bmc-asrock-x570d4u.dtb \
aspeed-bmc-bytedance-g220a.dtb \
aspeed-bmc-delta-ahe50dc.dtb \
aspeed-bmc-facebook-bletchley.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
new file mode 100644
index 000000000000..3c975bc41ae7
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Asrock Rack X570D4U BMC";
+ compatible = "asrock,x570d4u-bmc", "aspeed,ast2500";
+
+ aliases {
+ i2c40 = &i2c4mux0ch0;
+ i2c41 = &i2c4mux0ch1;
+ i2c42 = &i2c4mux0ch2;
+ i2c43 = &i2c4mux0ch3;
+ };
+
+ chosen {
+ stdout-path = &uart5;
+ };
+
+ memory@80000000 {
+ reg = <0x80000000 0x20000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pci_memory: region@9a000000 {
+ no-map;
+ reg = <0x9a000000 0x00010000>; /* 64K */
+ };
+
+ video_engine_memory: jpegbuffer {
+ size = <0x02800000>; /* 40M */
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+
+ gfx_memory: framebuffer {
+ size = <0x01000000>;
+ alignment = <0x01000000>;
+ compatible = "shared-dma-pool";
+ reusable;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led-0 {
+ /* led-heartbeat-n */
+ gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_HEARTBEAT;
+ linux,default-trigger = "timer";
+ };
+
+ led-1 {
+ /* led-fault-n */
+ gpios = <&gpio ASPEED_GPIO(Z, 2) GPIO_ACTIVE_LOW>;
+ color = <LED_COLOR_ID_AMBER>;
+ function = LED_FUNCTION_FAULT;
+ panic-indicator;
+ };
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+ <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>, <&adc 9>,
+ <&adc 10>, <&adc 11>, <&adc 12>;
+ };
+};
+
+&gpio {
+ status = "okay";
+ gpio-line-names =
+ /*A0-A3*/ "status-locatorled-n", "", "button-nmi-n", "",
+ /*A4-A7*/ "", "", "", "",
+ /*B0-B3*/ "input-bios-post-cmplt-n", "", "", "",
+ /*B4-B7*/ "", "", "", "",
+ /*C0-C3*/ "", "", "", "",
+ /*C4-C7*/ "", "", "control-locatorbutton", "",
+ /*D0-D3*/ "button-power", "control-power", "button-reset", "control-reset",
+ /*D4-D7*/ "", "", "", "",
+ /*E0-E3*/ "", "", "", "",
+ /*E4-E7*/ "", "", "", "",
+ /*F0-F3*/ "", "", "", "",
+ /*F4-F7*/ "", "", "", "",
+ /*G0-G3*/ "output-rtc-battery-voltage-read-enable", "input-id0", "input-id1", "input-id2",
+ /*G4-G7*/ "input-alert1-n", "input-alert2-n", "input-alert3-n", "",
+ /*H0-H3*/ "", "", "", "",
+ /*H4-H7*/ "input-mfg", "", "led-heartbeat-n", "input-caseopen",
+ /*I0-I3*/ "", "", "", "",
+ /*I4-I7*/ "", "", "", "",
+ /*J0-J3*/ "output-bmc-ready", "", "", "",
+ /*J4-J7*/ "", "", "", "",
+ /*K0-K3*/ "", "", "", "",
+ /*K4-K7*/ "", "", "", "",
+ /*L0-L3*/ "", "", "", "",
+ /*L4-L7*/ "", "", "", "",
+ /*M0-M3*/ "", "", "", "",
+ /*M4-M7*/ "", "", "", "",
+ /*N0-N3*/ "", "", "", "",
+ /*N4-N7*/ "", "", "", "",
+ /*O0-O3*/ "", "", "", "",
+ /*O4-O7*/ "", "", "", "",
+ /*P0-P3*/ "", "", "", "",
+ /*P4-P7*/ "", "", "", "",
+ /*Q0-Q3*/ "", "", "", "",
+ /*Q4-Q7*/ "", "", "", "",
+ /*R0-R3*/ "", "", "", "",
+ /*R4-R7*/ "", "", "", "",
+ /*S0-S3*/ "input-bmc-pchhot-n", "", "", "",
+ /*S4-S7*/ "", "", "", "",
+ /*T0-T3*/ "", "", "", "",
+ /*T4-T7*/ "", "", "", "",
+ /*U0-U3*/ "", "", "", "",
+ /*U4-U7*/ "", "", "", "",
+ /*V0-V3*/ "", "", "", "",
+ /*V4-V7*/ "", "", "", "",
+ /*W0-W3*/ "", "", "", "",
+ /*W4-W7*/ "", "", "", "",
+ /*X0-X3*/ "", "", "", "",
+ /*X4-X7*/ "", "", "", "",
+ /*Y0-Y3*/ "", "", "", "",
+ /*Y4-Y7*/ "", "", "", "",
+ /*Z0-Z3*/ "", "", "led-fault-n", "output-bmc-throttle-n",
+ /*Z4-Z7*/ "", "", "", "",
+ /*AA0-AA3*/ "input-cpu1-thermtrip-latch-n", "", "input-cpu1-prochot-n", "",
+ /*AA4-AC7*/ "", "", "", "",
+ /*AB0-AB3*/ "", "", "", "",
+ /*AB4-AC7*/ "", "", "", "",
+ /*AC0-AC3*/ "", "", "", "",
+ /*AC4-AC7*/ "", "", "", "";
+};
+
+&fmc {
+ status = "okay";
+ flash@0 {
+ status = "okay";
+ label = "bmc";
+ m25p,fast-read;
+ spi-max-frequency = <10000000>;
+#include "openbmc-flash-layout-64.dtsi"
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&vuart {
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1_default &pinctrl_mdio1_default>;
+
+ nvmem-cells = <ð0_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&mac1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rmii2_default &pinctrl_mdio2_default>;
+ use-ncsi;
+
+ nvmem-cells = <ð1_macaddress>;
+ nvmem-cell-names = "mac-address";
+};
+
+&i2c0 {
+ /* SMBus on auxiliary panel header (AUX_PANEL1) */
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+
+ w83773g@4c {
+ compatible = "nuvoton,w83773g";
+ reg = <0x4c>;
+ };
+};
+
+&i2c2 {
+ /* PSU SMBus (PSU_SMB1) */
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-mux@70 {
+ compatible = "nxp,pca9545";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c4mux0ch0: i2c@0 {
+ /* SMBus on PCI express 16x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ };
+
+ i2c4mux0ch1: i2c@1 {
+ /* SMBus on PCI express 8x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ };
+
+ i2c4mux0ch2: i2c@2 {
+ /* Unknown */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ };
+
+ i2c4mux0ch3: i2c@3 {
+ /* SMBus on PCI express 1x slot */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+};
+
+&i2c7 {
+ /* FRU and SPD EEPROM SMBus */
+ status = "okay";
+
+ eeprom@57 {
+ compatible = "st,24c128", "atmel,24c128";
+ reg = <0x57>;
+ pagesize = <16>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ eth0_macaddress: macaddress@3f80 {
+ reg = <0x3f80 6>;
+ };
+
+ eth1_macaddress: macaddress@3f88 {
+ reg = <0x3f88 6>;
+ };
+ };
+};
+
+&gfx {
+ status = "okay";
+};
+
+&pinctrl {
+ aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&vhub {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+&uhci {
+ status = "okay";
+};
+
+&kcs3 {
+ aspeed,lpc-io-reg = <0xca2>;
+ status = "okay";
+};
+
+&lpc_ctrl {
+ status = "okay";
+};
+
+&lpc_snoop {
+ status = "okay";
+ snoop-ports = <0x80>;
+};
+
+&p2a {
+ status = "okay";
+ memory-region = <&pci_memory>;
+};
+
+&video {
+ status = "okay";
+ memory-region = <&video_engine_memory>;
+};
+
+&pwm_tacho {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_default
+ &pinctrl_pwm1_default
+ &pinctrl_pwm2_default
+ &pinctrl_pwm3_default
+ &pinctrl_pwm4_default
+ &pinctrl_pwm5_default>;
+
+ fan@0 {
+ /* FAN1 (4-pin) */
+ reg = <0x00>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+ };
+
+ fan@1 {
+ /* FAN2 (4-pin) */
+ reg = <0x01>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+ };
+
+ fan@2 {
+ /* FAN3 (4-pin) */
+ reg = <0x02>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x02>;
+ };
+
+ fan@3 {
+ /* FAN4 (6-pin) */
+ reg = <0x03>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x04 0x0b>;
+ };
+
+ fan@4 {
+ /* FAN6 (6-pin) */
+ reg = <0x04>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x06 0x0d>;
+ };
+
+ fan@5 {
+ /* FAN5 (6-pin) */
+ reg = <0x05>;
+ aspeed,fan-tach-ch = /bits/ 8 <0x05 0x0c>;
+ };
+};
+
+&adc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_adc0_default
+ &pinctrl_adc1_default
+ &pinctrl_adc2_default
+ &pinctrl_adc3_default
+ &pinctrl_adc4_default
+ &pinctrl_adc5_default
+ &pinctrl_adc6_default
+ &pinctrl_adc7_default
+ &pinctrl_adc8_default
+ &pinctrl_adc9_default
+ &pinctrl_adc10_default
+ &pinctrl_adc11_default
+ &pinctrl_adc12_default
+ &pinctrl_adc13_default
+ &pinctrl_adc14_default
+ &pinctrl_adc15_default>;
+};
--
2.43.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-02 0:38 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-02 0:38 [PATCH v3 0/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:38 ` [PATCH v3 1/2] dt-bindings: arm: aspeed: add Asrock X570D4U board Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai [this message]
2023-12-02 0:38 ` [PATCH v3 2/2] ARM: dts: aspeed: asrock: Add ASRock X570D4U BMC Renze Nicolai
2023-12-02 0:38 ` Renze Nicolai
2023-12-02 0:44 ` [PATCH v3 0/2] " Renze Nicolai
2023-12-02 0:44 ` Renze Nicolai
2023-12-02 0:44 ` Renze Nicolai
2023-12-06 6:46 ` Joel Stanley
2023-12-06 6:46 ` Joel Stanley
2023-12-06 6:46 ` Joel Stanley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231202003908.3635695-3-renze@rnplus.nl \
--to=renze@rnplus.nl \
--cc=linux-aspeed@lists.ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.