* [PATCH V3 1/7] board: rockchip: Refactor panel auto-detect code
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 2/7] spl: Add Kconfig options for ADC Chris Morgan
` (5 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Make the inability to detect a panel using the auto detection code not
fail the entire boot process. This means that if the panel ID cannot
be read we don't set an environment variable for the panel, and if an
environment variable for the panel is not set we don't attempt to
update the compatible string. Changes to the code also ensure that
when there are multiple compatible strings required for the panel
we use them both, which solves some issues that will pop up soon
for the Linux driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 115 +++++++++++++--------
1 file changed, 74 insertions(+), 41 deletions(-)
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 3f1a42d184..3d0c614623 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -40,6 +40,7 @@ struct rg3xx_model {
const char *board;
const char *board_name;
const char *fdtfile;
+ const bool detect_panel;
};
enum rgxx3_device_id {
@@ -54,52 +55,67 @@ enum rgxx3_device_id {
static const struct rg3xx_model rg3xx_model_details[] = {
[RG353M] = {
- 517, /* Observed average from device */
- "rk3566-anbernic-rg353m",
- "RG353M",
- DTB_DIR "rk3566-anbernic-rg353p.dtb", /* Identical devices */
+ .adc_value = 517, /* Observed average from device */
+ .board = "rk3566-anbernic-rg353m",
+ .board_name = "RG353M",
+ /* Device is identical to RG353P. */
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
+ .detect_panel = 1,
},
[RG353P] = {
- 860, /* Documented value of 860 */
- "rk3566-anbernic-rg353p",
- "RG353P",
- DTB_DIR "rk3566-anbernic-rg353p.dtb",
+ .adc_value = 860, /* Documented value of 860 */
+ .board = "rk3566-anbernic-rg353p",
+ .board_name = "RG353P",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg353p.dtb",
+ .detect_panel = 1,
},
[RG353V] = {
- 695, /* Observed average from device */
- "rk3566-anbernic-rg353v",
- "RG353V",
- DTB_DIR "rk3566-anbernic-rg353v.dtb",
+ .adc_value = 695, /* Observed average from device */
+ .board = "rk3566-anbernic-rg353v",
+ .board_name = "RG353V",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg353v.dtb",
+ .detect_panel = 1,
},
[RG503] = {
- 1023, /* Observed average from device */
- "rk3566-anbernic-rg503",
- "RG503",
- DTB_DIR "rk3566-anbernic-rg503.dtb",
+ .adc_value = 1023, /* Observed average from device */
+ .board = "rk3566-anbernic-rg503",
+ .board_name = "RG503",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb",
+ .detect_panel = 0,
},
/* Devices with duplicate ADC value */
[RG353PS] = {
- 860, /* Observed average from device */
- "rk3566-anbernic-rg353ps",
- "RG353PS",
- DTB_DIR "rk3566-anbernic-rg353ps.dtb",
+ .adc_value = 860, /* Observed average from device */
+ .board = "rk3566-anbernic-rg353ps",
+ .board_name = "RG353PS",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg353ps.dtb",
+ .detect_panel = 1,
},
[RG353VS] = {
- 695, /* Gathered from second hand information */
- "rk3566-anbernic-rg353vs",
- "RG353VS",
- DTB_DIR "rk3566-anbernic-rg353vs.dtb",
+ .adc_value = 695, /* Gathered from second hand information */
+ .board = "rk3566-anbernic-rg353vs",
+ .board_name = "RG353VS",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb",
+ .detect_panel = 1,
},
};
struct rg353_panel {
const u16 id;
- const char *panel_compat;
+ const char *panel_compat[2];
};
static const struct rg353_panel rg353_panel_details[] = {
- { .id = 0x3052, .panel_compat = "newvision,nv3051d"},
- { .id = 0x3821, .panel_compat = "anbernic,rg353v-panel-v2"},
+ {
+ .id = 0x3052,
+ .panel_compat[0] = "anbernic,rg353p-panel",
+ .panel_compat[1] = "newvision,nv3051d",
+ },
+ {
+ .id = 0x3821,
+ .panel_compat[0] = "anbernic,rg353v-panel-v2",
+ .panel_compat[1] = NULL,
+ },
};
/*
@@ -298,11 +314,10 @@ int rgxx3_detect_display(void)
if (!panel) {
printf("Unable to identify panel_id %x\n",
(panel_id[0] << 8) | panel_id[1]);
- env_set("panel", "unknown");
return -EINVAL;
}
- env_set("panel", panel->panel_compat);
+ env_set("panel", panel->panel_compat[0]);
return 0;
}
@@ -367,13 +382,14 @@ int rgxx3_detect_device(void)
rg3xx_model_details[board_id].board_name);
env_set("fdtfile", rg3xx_model_details[board_id].fdtfile);
- /* Detect the panel type for any device that isn't a 503. */
- if (board_id == RG503)
+ /* Skip panel detection for when it is not needed. */
+ if (!rg3xx_model_details[board_id].detect_panel)
return 0;
+ /* Warn but don't fail for errors in auto-detection of the panel. */
ret = rgxx3_detect_display();
if (ret)
- return ret;
+ printf("Failed to detect panel type\n");
return 0;
}
@@ -400,7 +416,8 @@ int rk_board_late_init(void)
int ft_board_setup(void *blob, struct bd_info *bd)
{
- int node, ret;
+ const struct rg353_panel *panel = NULL;
+ int node, ret, i;
char *env;
/* No fixups necessary for the RG503 */
@@ -414,6 +431,12 @@ int ft_board_setup(void *blob, struct bd_info *bd)
rg3xx_model_details[RG353M].board_name,
sizeof(rg3xx_model_details[RG353M].board_name));
+ env = env_get("panel");
+ if (!env) {
+ printf("Can't get panel env\n");
+ return 0;
+ }
+
/*
* Check if the environment variable doesn't equal the panel.
* If it doesn't, update the devicetree to the correct panel.
@@ -424,12 +447,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
return -ENODEV;
}
- env = env_get("panel");
- if (!env) {
- printf("Can't get panel env\n");
- return -ENODEV;
- }
-
ret = fdt_node_check_compatible(blob, node, env);
if (ret < 0)
return -ENODEV;
@@ -438,8 +455,24 @@ int ft_board_setup(void *blob, struct bd_info *bd)
if (!ret)
return 0;
- do_fixup_by_path_string(blob, "/dsi@fe060000/panel@0",
- "compatible", env);
+ /* Panels don't match, search by first compatible value. */
+ for (i = 0; i < ARRAY_SIZE(rg353_panel_details); i++) {
+ if (!strcmp(env, rg353_panel_details[i].panel_compat[0])) {
+ panel = &rg353_panel_details[i];
+ break;
+ }
+ }
+
+ if (!panel) {
+ printf("Unable to identify panel by compat string\n");
+ return -ENODEV;
+ }
+
+ /* Set the compatible with the auto-detected values */
+ fdt_setprop_string(blob, node, "compatible", panel->panel_compat[0]);
+ if (panel->panel_compat[1])
+ fdt_appendprop_string(blob, node, "compatible",
+ panel->panel_compat[1]);
return 0;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 2/7] spl: Add Kconfig options for ADC
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
2023-12-11 23:21 ` [PATCH V3 1/7] board: rockchip: Refactor panel auto-detect code Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL Chris Morgan
` (4 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Add kconfig options to enable ADC in SPL
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
common/spl/Kconfig | 7 +++++++
drivers/Makefile | 1 +
drivers/adc/Makefile | 2 +-
3 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index c521b02f4a..ada9dcea5c 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -579,6 +579,13 @@ config SPL_FIT_IMAGE_TINY
ensure this information is available to the next image
invoked).
+config SPL_ADC
+ bool "Support ADC drivers"
+ help
+ Enable ADC drivers in SPL. These drivers can allow the reading of
+ analog values from one or more channels. Enable this option to
+ build the drivers in drivers/adc as part of an SPL build.
+
config SPL_CACHE
bool "Support CACHE drivers"
help
diff --git a/drivers/Makefile b/drivers/Makefile
index bf73b7718c..81ba2c534e 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0+
+obj-$(CONFIG_$(SPL_)ADC) += adc/
obj-$(CONFIG_$(SPL_TPL_)BIOSEMU) += bios_emulator/
obj-$(CONFIG_$(SPL_TPL_)BLK) += block/
obj-$(CONFIG_$(SPL_TPL_)BOOTCOUNT_LIMIT) += bootcount/
diff --git a/drivers/adc/Makefile b/drivers/adc/Makefile
index 5336c82097..9eb07769b0 100644
--- a/drivers/adc/Makefile
+++ b/drivers/adc/Makefile
@@ -4,7 +4,7 @@
# Przemyslaw Marczak <p.marczak@samsung.com>
#
-obj-$(CONFIG_ADC) += adc-uclass.o
+obj-$(CONFIG_$(SPL_)ADC) += adc-uclass.o
obj-$(CONFIG_ADC_EXYNOS) += exynos-adc.o
obj-$(CONFIG_ADC_SANDBOX) += sandbox.o
obj-$(CONFIG_SARADC_ROCKCHIP) += rockchip-saradc.o
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
2023-12-11 23:21 ` [PATCH V3 1/7] board: rockchip: Refactor panel auto-detect code Chris Morgan
2023-12-11 23:21 ` [PATCH V3 2/7] spl: Add Kconfig options for ADC Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 4/7] board: rockchip: Add Recovery Button for Anbernic RGxx3 Chris Morgan
` (3 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Update the rockchip_dnl_key_pressed() so that it can run in
SPL. Also change the ADC channel to a define that can be
overridden by a board specific option.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm/mach-rockchip/Makefile | 4 ++--
arch/arm/mach-rockchip/boot_mode.c | 11 ++++++++++-
2 files changed, 12 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-rockchip/Makefile b/arch/arm/mach-rockchip/Makefile
index 1dc92066bb..ff089ae949 100644
--- a/arch/arm/mach-rockchip/Makefile
+++ b/arch/arm/mach-rockchip/Makefile
@@ -15,13 +15,13 @@ obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
-ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
-
# Always include boot_mode.o, as we bypass it (i.e. turn it off)
# inside of boot_mode.c when CONFIG_ROCKCHIP_BOOT_MODE_REG is 0. This way,
# we can have the preprocessor correctly recognise both 0x0 and 0
# meaning "turn it off".
obj-y += boot_mode.o
+
+ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
obj-$(CONFIG_MISC_INIT_R) += misc.o
endif
diff --git a/arch/arm/mach-rockchip/boot_mode.c b/arch/arm/mach-rockchip/boot_mode.c
index eb8f65ae4e..d2308768be 100644
--- a/arch/arm/mach-rockchip/boot_mode.c
+++ b/arch/arm/mach-rockchip/boot_mode.c
@@ -38,6 +38,10 @@ void set_back_to_bootrom_dnl_flag(void)
#define KEY_DOWN_MIN_VAL 0
#define KEY_DOWN_MAX_VAL 30
+#ifndef RK_DNL_ADC_CHAN
+#define RK_DNL_ADC_CHAN 1
+#endif
+
__weak int rockchip_dnl_key_pressed(void)
{
unsigned int val;
@@ -52,7 +56,8 @@ __weak int rockchip_dnl_key_pressed(void)
ret = -ENODEV;
uclass_foreach_dev(dev, uc) {
if (!strncmp(dev->name, "saradc", 6)) {
- ret = adc_channel_single_shot(dev->name, 1, &val);
+ ret = adc_channel_single_shot(dev->name,
+ RK_DNL_ADC_CHAN, &val);
break;
}
}
@@ -73,11 +78,13 @@ __weak int rockchip_dnl_key_pressed(void)
void rockchip_dnl_mode_check(void)
{
+#if CONFIG_IS_ENABLED(ADC)
if (rockchip_dnl_key_pressed()) {
printf("download key pressed, entering download mode...");
set_back_to_bootrom_dnl_flag();
do_reset(NULL, 0, 0, NULL);
}
+#endif
}
int setup_boot_mode(void)
@@ -90,6 +97,7 @@ int setup_boot_mode(void)
boot_mode = readl(reg);
debug("%s: boot mode 0x%08x\n", __func__, boot_mode);
+#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
/* Clear boot mode */
writel(BOOT_NORMAL, reg);
@@ -103,6 +111,7 @@ int setup_boot_mode(void)
env_set("preboot", "setenv preboot; ums mmc 0");
break;
}
+#endif
return 0;
}
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 4/7] board: rockchip: Add Recovery Button for Anbernic RGxx3
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
` (2 preceding siblings ...)
2023-12-11 23:21 ` [PATCH V3 3/7] rockchip: boot_mode: Allow rockchip_dnl_key_pressed() in SPL Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 5/7] rockchip: board: Add board_rng_seed() for all Rockchip devices Chris Morgan
` (2 subsequent siblings)
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Add support for users to enter recovery mode by holding the function
button when they power up the device.
Since the device has soldered eMMC and sometimes does not expose a clk
pin on the mainboard there is a small chance that a user who flashes a
bad bootloader may not be able to recover if the headers themselves
are valid. As a result this check is done during spl_early_init() to
ensure that it runs as early as possible, and it does so by directly
manipulating the ADC hardware in lieu of loading the ADC driver.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi | 11 +++++++++++
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 6 +++++-
configs/anbernic-rgxx3-rk3566_defconfig | 16 ++++++++++++----
include/configs/anbernic-rgxx3-rk3566.h | 2 ++
4 files changed, 30 insertions(+), 5 deletions(-)
diff --git a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
index f986e1941e..e3ab196d22 100644
--- a/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
+++ b/arch/arm/dts/rk3566-anbernic-rgxx3-u-boot.dtsi
@@ -76,6 +76,12 @@
/delete-property/ clock-names;
};
+&saradc {
+ bootph-all;
+ vref-supply = <&vcc_sys>;
+ status = "okay";
+};
+
&sdhci {
pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
<&emmc_datastrobe>, <&emmc_rstnout>;
@@ -94,3 +100,8 @@
bootph-all;
status = "okay";
};
+
+&vcc_sys {
+ bootph-all;
+ status = "okay";
+};
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 3d0c614623..45854709f5 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -5,6 +5,7 @@
#include <abuf.h>
#include <adc.h>
+#include <asm/arch-rockchip/boot_mode.h>
#include <asm/io.h>
#include <display.h>
#include <dm.h>
@@ -119,11 +120,14 @@ static const struct rg353_panel rg353_panel_details[] = {
};
/*
- * Start LED very early so user knows device is on. Set color
+ * Check if rockchip_dnl button is pressed and reboot into rockusb if
+ * true. Start LED very early so user knows device is on. Set color
* to red.
*/
void spl_board_init(void)
{
+ setup_boot_mode();
+
/* Set GPIO0_C5, GPIO0_C6, and GPIO0_C7 to output. */
writel(GPIO_WRITEMASK(GPIO_C7 | GPIO_C6 | GPIO_C5) | \
(GPIO_C7 | GPIO_C6 | GPIO_C5),
diff --git a/configs/anbernic-rgxx3-rk3566_defconfig b/configs/anbernic-rgxx3-rk3566_defconfig
index ed6643d9d4..4e72f75815 100644
--- a/configs/anbernic-rgxx3-rk3566_defconfig
+++ b/configs/anbernic-rgxx3-rk3566_defconfig
@@ -3,6 +3,7 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
+CONFIG_SPL_GPIO=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
@@ -24,7 +25,9 @@ CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
+CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
@@ -32,7 +35,7 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3566-anbernic-rgxx3.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_BOARD_RNG_SEED=y
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
@@ -41,6 +44,8 @@ CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_ADC=y
+CONFIG_SPL_POWER=y
CONFIG_SPL_ATF=y
CONFIG_CMD_PWM=y
CONFIG_CMD_GPT=y
@@ -50,8 +55,10 @@ CONFIG_CMD_MMC=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
# CONFIG_NET is not set
+CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_SPL_CLK=y
@@ -67,13 +74,13 @@ CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY=y
+CONFIG_SPL_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_DM_PMIC_FAN53555=y
CONFIG_PMIC_RK8XX=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_DM_REGULATOR_GPIO=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
CONFIG_REGULATOR_RK8XX=y
-CONFIG_DM_REGULATOR_SCMI=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
# CONFIG_RAM_ROCKCHIP_DEBUG is not set
@@ -89,5 +96,6 @@ CONFIG_VIDEO_ROCKCHIP=y
CONFIG_DISPLAY_ROCKCHIP_DW_MIPI=y
CONFIG_VIDEO_BRIDGE=y
CONFIG_REGEX=y
+# CONFIG_RSA is not set
CONFIG_ERRNO_STR=y
# CONFIG_EFI_LOADER is not set
diff --git a/include/configs/anbernic-rgxx3-rk3566.h b/include/configs/anbernic-rgxx3-rk3566.h
index 3c4ea4e7d8..2aaac55c06 100644
--- a/include/configs/anbernic-rgxx3-rk3566.h
+++ b/include/configs/anbernic-rgxx3-rk3566.h
@@ -9,4 +9,6 @@
"stdout=serial,vidconsole\0" \
"stderr=serial,vidconsole\0"
+#define RK_DNL_ADC_CHAN 0
+
#endif
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 5/7] rockchip: board: Add board_rng_seed() for all Rockchip devices
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
` (3 preceding siblings ...)
2023-12-11 23:21 ` [PATCH V3 4/7] board: rockchip: Add Recovery Button for Anbernic RGxx3 Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 6/7] board: rockchip: Add support for new boards to RGxx3 Chris Morgan
2023-12-11 23:21 ` [PATCH V3 7/7] doc: board: anbernic: Update rgxx3 to add new boards Chris Morgan
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Allow all rockchip devices to use the hardware RNG to seed Linux
RNG.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
arch/arm/mach-rockchip/board.c | 32 ++++++++++++++++++++++
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 29 --------------------
2 files changed, 32 insertions(+), 29 deletions(-)
diff --git a/arch/arm/mach-rockchip/board.c b/arch/arm/mach-rockchip/board.c
index 57f08e0be0..77145524ea 100644
--- a/arch/arm/mach-rockchip/board.c
+++ b/arch/arm/mach-rockchip/board.c
@@ -348,3 +348,35 @@ __weak int misc_init_r(void)
return ret;
}
#endif
+
+#if IS_ENABLED(CONFIG_BOARD_RNG_SEED) && IS_ENABLED(CONFIG_RNG_ROCKCHIP)
+#include <rng.h>
+
+/* Use hardware rng to seed Linux random. */
+__weak int board_rng_seed(struct abuf *buf)
+{
+ struct udevice *dev;
+ size_t len = 0x8;
+ u64 *data;
+
+ data = malloc(len);
+ if (!data) {
+ printf("Out of memory\n");
+ return -ENOMEM;
+ }
+
+ if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
+ printf("No RNG device\n");
+ return -ENODEV;
+ }
+
+ if (dm_rng_read(dev, data, len)) {
+ printf("Reading RNG failed\n");
+ return -EIO;
+ }
+
+ abuf_init_set(buf, data, len);
+
+ return 0;
+}
+#endif
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 45854709f5..7bef5a53f0 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -17,7 +17,6 @@
#include <mmc.h>
#include <panel.h>
#include <pwm.h>
-#include <rng.h>
#include <stdlib.h>
#include <video_bridge.h>
@@ -137,34 +136,6 @@ void spl_board_init(void)
(GPIO0_BASE + GPIO_SWPORT_DR_H));
}
-/* Use hardware rng to seed Linux random. */
-int board_rng_seed(struct abuf *buf)
-{
- struct udevice *dev;
- size_t len = 0x8;
- u64 *data;
-
- data = malloc(len);
- if (!data) {
- printf("Out of memory\n");
- return -ENOMEM;
- }
-
- if (uclass_get_device(UCLASS_RNG, 0, &dev) || !dev) {
- printf("No RNG device\n");
- return -ENODEV;
- }
-
- if (dm_rng_read(dev, data, len)) {
- printf("Reading RNG failed\n");
- return -EIO;
- }
-
- abuf_init_set(buf, data, len);
-
- return 0;
-}
-
/*
* Buzz the buzzer so the user knows something is going on. Make it
* optional in case PWM is disabled.
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 6/7] board: rockchip: Add support for new boards to RGxx3
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
` (4 preceding siblings ...)
2023-12-11 23:21 ` [PATCH V3 5/7] rockchip: board: Add board_rng_seed() for all Rockchip devices Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
2023-12-11 23:21 ` [PATCH V3 7/7] doc: board: anbernic: Update rgxx3 to add new boards Chris Morgan
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Add support for the Anbernic RG-ARC-D, Anbernic RG-ARC-S, Powkiddy
RK2023, and Powkiddy RGB30 to the Anbernic RGxx3. While the Powkiddy
devices are manufactured by Powkiddy instead of Anbernic,
the hardware is so similar they can all use the same bootloader.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c | 44 +++++++++++++++++++---
1 file changed, 39 insertions(+), 5 deletions(-)
diff --git a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
index 7bef5a53f0..2445663d43 100644
--- a/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
+++ b/board/anbernic/rgxx3_rk3566/rgxx3-rk3566.c
@@ -48,9 +48,13 @@ enum rgxx3_device_id {
RG353P,
RG353V,
RG503,
+ RGB30,
+ RK2023,
+ RGARCD,
/* Devices with duplicate ADC value */
RG353PS,
RG353VS,
+ RGARCS,
};
static const struct rg3xx_model rg3xx_model_details[] = {
@@ -83,6 +87,27 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.fdtfile = DTB_DIR "rk3566-anbernic-rg503.dtb",
.detect_panel = 0,
},
+ [RGB30] = {
+ .adc_value = 383, /* Gathered from second hand information */
+ .board = "rk3566-powkiddy-rgb30",
+ .board_name = "RGB30",
+ .fdtfile = DTB_DIR "rk3566-powkiddy-rgb30.dtb",
+ .detect_panel = 0,
+ },
+ [RK2023] = {
+ .adc_value = 635, /* Observed average from device */
+ .board = "rk3566-powkiddy-rk2023",
+ .board_name = "RK2023",
+ .fdtfile = DTB_DIR "rk3566-powkiddy-rk2023.dtb",
+ .detect_panel = 0,
+ },
+ [RGARCD] = {
+ .adc_value = 183, /* Observed average from device */
+ .board = "rk3566-anbernic-rg-arc-d",
+ .board_name = "Anbernic RG ARC-D",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-d.dtb",
+ .detect_panel = 0,
+ },
/* Devices with duplicate ADC value */
[RG353PS] = {
.adc_value = 860, /* Observed average from device */
@@ -98,6 +123,13 @@ static const struct rg3xx_model rg3xx_model_details[] = {
.fdtfile = DTB_DIR "rk3566-anbernic-rg353vs.dtb",
.detect_panel = 1,
},
+ [RGARCS] = {
+ .adc_value = 183, /* Observed average from device */
+ .board = "rk3566-anbernic-rg-arc-s",
+ .board_name = "Anbernic RG ARC-S",
+ .fdtfile = DTB_DIR "rk3566-anbernic-rg-arc-s.dtb",
+ .detect_panel = 0,
+ },
};
struct rg353_panel {
@@ -332,19 +364,21 @@ int rgxx3_detect_device(void)
}
/*
- * Try to access the eMMC on an RG353V or RG353P. If it's
- * missing, it's an RG353VS or RG353PS. Note we could also
- * check for a touchscreen at 0x1a on i2c2.
+ * Try to access the eMMC on an RG353V, RG353P, or RG Arc D.
+ * If it's missing, it's an RG353VS, RG353PS, or RG Arc S.
+ * Note we could also check for a touchscreen at 0x1a on i2c2.
*/
- if (board_id == RG353V || board_id == RG353P) {
+ if (board_id == RG353V || board_id == RG353P || board_id == RGARCD) {
mmc = find_mmc_device(0);
if (mmc) {
ret = mmc_init(mmc);
if (ret) {
if (board_id == RG353V)
board_id = RG353VS;
- else
+ if (board_id == RG353P)
board_id = RG353PS;
+ else
+ board_id = RGARCS;
}
}
}
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH V3 7/7] doc: board: anbernic: Update rgxx3 to add new boards
2023-12-11 23:21 [PATCH V3 0/7] Add Additional Boards and Features to RGxx3 Chris Morgan
` (5 preceding siblings ...)
2023-12-11 23:21 ` [PATCH V3 6/7] board: rockchip: Add support for new boards to RGxx3 Chris Morgan
@ 2023-12-11 23:21 ` Chris Morgan
6 siblings, 0 replies; 8+ messages in thread
From: Chris Morgan @ 2023-12-11 23:21 UTC (permalink / raw)
To: u-boot; +Cc: andre.przywara, kever.yang, philipp.tomsich, sjg, Chris Morgan
From: Chris Morgan <macromorgan@hotmail.com>
Update the RGxx3 documentation to note that it now supports the
RG-ARC-D, RG-ARC-S, Powkiddy RK2023, and Powkiddy RGB30. Also update
verbiage around panel detection to note that it is no longer hard coded
to the RG503.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
doc/board/anbernic/rgxx3.rst | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/doc/board/anbernic/rgxx3.rst b/doc/board/anbernic/rgxx3.rst
index 7d1beb423c..d159ed2f76 100644
--- a/doc/board/anbernic/rgxx3.rst
+++ b/doc/board/anbernic/rgxx3.rst
@@ -5,6 +5,8 @@ U-Boot for Anbernic RGxx3 Devices
This allows U-Boot to boot the following Anbernic devices:
+ - Anbernic RG-ARC-D
+ - Anbernic RG-ARC-S
- Anbernic RG353M
- Anbernic RG353P
- Anbernic RG353PS
@@ -12,18 +14,24 @@ This allows U-Boot to boot the following Anbernic devices:
- Anbernic RG353VS
- Anbernic RG503
+Additionally, the following very similar non-Anbernic devices are also
+supported:
+
+ - Powkiddy RGB30
+ - Powkiddy RK2023
+
The correct device is detected automatically by comparing ADC values
from ADC channel 1. In the event of an RG353V or RG353P, an attempt
is then made to probe for an eMMC and if it fails the device is assumed
to be an RG353VS or RG353PS. Based on the detected device, the
environment variables "board", "board_name", and "fdtfile" are set to
the correct values corresponding to the board which can be read by a
-boot script to boot with the correct device tree. If the board detected
-is not of type RG503 (which currently has only 1 panel revision) a
-panel detect is then performed by probing a "dummy" display on the DSI
-bus and then querying the display ID. The display ID is then compared
-to a table to get the known compatible string for use in Linux, and
-this string is saved as an environment variable of "panel".
+boot script to boot with the correct device tree. If a board is defined
+as requiring panel detection, a panel detect is then performed by
+probing a "dummy" display on the DSI bus and then querying the display
+ID. The display ID is then compared to a table to get the known
+compatible string for use in Linux, and this string is saved as an
+environment variable of "panel".
FDT fixups are performed in the event of an RG353M to change the device
name, or in the event the panel detected does not match the devicetree.
--
2.34.1
^ permalink raw reply related [flat|nested] 8+ messages in thread