From: Tomer Maimon <tmaimon77@gmail.com>
To: <arnd@arndb.de>, <pmenzel@molgen.mpg.de>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <j.neuschaefer@gmx.net>
Cc: <openbmc@lists.ozlabs.org>, <linux-gpio@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v2 0/3] soc: add NPCM BPC driver support
Date: Tue, 12 Dec 2023 12:07:00 +0200 [thread overview]
Message-ID: <20231212100703.3374555-1-tmaimon77@gmail.com> (raw)
This patch set adds BIOS Post code (BPC) support for the Nuvoton
NPCM Baseboard Management Controller (BMC).
Nuvoton BMC NPCM BIOS Post Code (BPC) monitoring two configurable
I/O addresses written by the host on the bus, the capture data
stored in 128-word FIFO.
NPCM BPC can support capture double words.
The NPCM BPC driver tested on NPCM750 Olympus board.
Tomer Maimon (3):
dt-bindings: soc: nuvoton: Add NPCM BPC
soc: nuvoton: add configuration menu
soc: nuvoton: add NPCM BPC driver
.../soc/nuvoton/nuvoton,npcm-bpc.yaml | 63 +++
drivers/soc/nuvoton/Kconfig | 16 +-
drivers/soc/nuvoton/Makefile | 1 +
drivers/soc/nuvoton/npcm-bpc.c | 388 ++++++++++++++++++
4 files changed, 467 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml
create mode 100644 drivers/soc/nuvoton/npcm-bpc.c
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Tomer Maimon <tmaimon77@gmail.com>
To: <arnd@arndb.de>, <pmenzel@molgen.mpg.de>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <conor+dt@kernel.org>,
<avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <j.neuschaefer@gmx.net>
Cc: linux-gpio@vger.kernel.org, openbmc@lists.ozlabs.org,
Tomer Maimon <tmaimon77@gmail.com>,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v2 0/3] soc: add NPCM BPC driver support
Date: Tue, 12 Dec 2023 12:07:00 +0200 [thread overview]
Message-ID: <20231212100703.3374555-1-tmaimon77@gmail.com> (raw)
This patch set adds BIOS Post code (BPC) support for the Nuvoton
NPCM Baseboard Management Controller (BMC).
Nuvoton BMC NPCM BIOS Post Code (BPC) monitoring two configurable
I/O addresses written by the host on the bus, the capture data
stored in 128-word FIFO.
NPCM BPC can support capture double words.
The NPCM BPC driver tested on NPCM750 Olympus board.
Tomer Maimon (3):
dt-bindings: soc: nuvoton: Add NPCM BPC
soc: nuvoton: add configuration menu
soc: nuvoton: add NPCM BPC driver
.../soc/nuvoton/nuvoton,npcm-bpc.yaml | 63 +++
drivers/soc/nuvoton/Kconfig | 16 +-
drivers/soc/nuvoton/Makefile | 1 +
drivers/soc/nuvoton/npcm-bpc.c | 388 ++++++++++++++++++
4 files changed, 467 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/soc/nuvoton/nuvoton,npcm-bpc.yaml
create mode 100644 drivers/soc/nuvoton/npcm-bpc.c
--
2.34.1
next reply other threads:[~2023-12-12 10:07 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-12 10:07 Tomer Maimon [this message]
2023-12-12 10:07 ` [PATCH v2 0/3] soc: add NPCM BPC driver support Tomer Maimon
2023-12-12 10:07 ` [PATCH v2 1/3] dt-bindings: soc: nuvoton: Add NPCM BPC Tomer Maimon
2023-12-12 10:07 ` Tomer Maimon
2023-12-12 16:18 ` Conor Dooley
2023-12-12 16:18 ` Conor Dooley
2023-12-13 6:23 ` Krzysztof Kozlowski
2023-12-12 10:07 ` [PATCH v2 2/3] soc: nuvoton: add configuration menu Tomer Maimon
2023-12-12 10:07 ` Tomer Maimon
2023-12-12 10:07 ` [PATCH v2 3/3] soc: nuvoton: add NPCM BPC driver Tomer Maimon
2023-12-12 10:07 ` Tomer Maimon
2023-12-13 0:48 ` kernel test robot
2023-12-13 0:48 ` kernel test robot
2023-12-13 6:22 ` [PATCH v2 0/3] soc: add NPCM BPC driver support Krzysztof Kozlowski
2023-12-13 9:44 ` Tomer Maimon
2023-12-13 9:44 ` Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231212100703.3374555-1-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=j.neuschaefer@gmx.net \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=pmenzel@molgen.mpg.de \
--cc=robh+dt@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.