All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maksim Kiselev <bigunclemax@gmail.com>
Cc: Maksim Kiselev <bigunclemax@gmail.com>,
	Martin Botka <martin.botka@somainline.org>,
	Andre Przywara <andre.przywara@arm.com>,
	Vasily Khoruzhick <anarsoul@gmail.com>,
	Yangtao Li <tiny.windzz@gmail.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	linux-pm@vger.kernel.org (open list:ALLWINNER THERMAL DRIVER),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Allwinner sunXi SoC support),
	linux-sunxi@lists.linux.dev (open list:ARM/Allwinner sunXi SoC
	support), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v1] thermal: sun8i: extend H6 calibration function to support 4 sensors
Date: Sun, 17 Dec 2023 16:36:36 +0300	[thread overview]
Message-ID: <20231217133637.54773-1-bigunclemax@gmail.com> (raw)

The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.

Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f989b55a8aa8..9af95b4785be 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -221,16 +221,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	struct device *dev = tmdev->dev;
 	int i, ft_temp;
 
-	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+	if (!caldata[0])
 		return -EINVAL;
 
 	/*
 	 * efuse layout:
 	 *
-	 *	0   11  16	 32
-	 *	+-------+-------+-------+
-	 *	|temp|  |sensor0|sensor1|
-	 *	+-------+-------+-------+
+	 * 0      11  16     27   32     43   48    57
+	 * +----------+-----------+-----------+-----------+
+	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
+	 * +----------+-----------+-----------+-----------+
+	 *                      ^           ^           ^
+	 *                      |           |           |
+	 *                      |           |           sensor3[11:8]
+	 *                      |           sensor3[7:4]
+	 *                      sensor3[3:0]
 	 *
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
@@ -243,9 +248,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
 
 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
-		int cdata, offset;
-		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+		int sensor_reg, sensor_temp, cdata, offset;
+
+		if (i == 3)
+			sensor_reg = (caldata[1] >> 12)
+				     | ((caldata[2] >> 12) << 4)
+				     | ((caldata[3] >> 12) << 8);
+		else
+			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
 
 		/*
 		 * Calibration data is CALIBRATE_DEFAULT - (calculated
-- 
2.40.1


WARNING: multiple messages have this Message-ID (diff)
From: Maksim Kiselev <bigunclemax@gmail.com>
Cc: Maksim Kiselev <bigunclemax@gmail.com>,
	Martin Botka <martin.botka@somainline.org>,
	Andre Przywara <andre.przywara@arm.com>,
	Vasily Khoruzhick <anarsoul@gmail.com>,
	Yangtao Li <tiny.windzz@gmail.com>,
	"Rafael J. Wysocki" <rafael@kernel.org>,
	Daniel Lezcano <daniel.lezcano@linaro.org>,
	Zhang Rui <rui.zhang@intel.com>,
	Lukasz Luba <lukasz.luba@arm.com>, Chen-Yu Tsai <wens@csie.org>,
	Jernej Skrabec <jernej.skrabec@gmail.com>,
	Samuel Holland <samuel@sholland.org>,
	linux-pm@vger.kernel.org (open list:ALLWINNER THERMAL DRIVER),
	linux-arm-kernel@lists.infradead.org (moderated
	list:ARM/Allwinner sunXi SoC support),
	linux-sunxi@lists.linux.dev (open list:ARM/Allwinner sunXi SoC
	support), linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v1] thermal: sun8i: extend H6 calibration function to support 4 sensors
Date: Sun, 17 Dec 2023 16:36:36 +0300	[thread overview]
Message-ID: <20231217133637.54773-1-bigunclemax@gmail.com> (raw)

The H616 SoC resembles the H6 thermal sensor controller, with a few
changes like four sensors.

Extend sun50i_h6_ths_calibrate() function to support calibration of
these sensors.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
---
 drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
 1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
index f989b55a8aa8..9af95b4785be 100644
--- a/drivers/thermal/sun8i_thermal.c
+++ b/drivers/thermal/sun8i_thermal.c
@@ -221,16 +221,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	struct device *dev = tmdev->dev;
 	int i, ft_temp;
 
-	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
+	if (!caldata[0])
 		return -EINVAL;
 
 	/*
 	 * efuse layout:
 	 *
-	 *	0   11  16	 32
-	 *	+-------+-------+-------+
-	 *	|temp|  |sensor0|sensor1|
-	 *	+-------+-------+-------+
+	 * 0      11  16     27   32     43   48    57
+	 * +----------+-----------+-----------+-----------+
+	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
+	 * +----------+-----------+-----------+-----------+
+	 *                      ^           ^           ^
+	 *                      |           |           |
+	 *                      |           |           sensor3[11:8]
+	 *                      |           sensor3[7:4]
+	 *                      sensor3[3:0]
 	 *
 	 * The calibration data on the H6 is the ambient temperature and
 	 * sensor values that are filled during the factory test stage.
@@ -243,9 +248,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
 	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
 
 	for (i = 0; i < tmdev->chip->sensor_num; i++) {
-		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
-		int cdata, offset;
-		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
+		int sensor_reg, sensor_temp, cdata, offset;
+
+		if (i == 3)
+			sensor_reg = (caldata[1] >> 12)
+				     | ((caldata[2] >> 12) << 4)
+				     | ((caldata[3] >> 12) << 8);
+		else
+			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
+
+		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
 
 		/*
 		 * Calibration data is CALIBRATE_DEFAULT - (calculated
-- 
2.40.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

             reply	other threads:[~2023-12-17 13:54 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-12-17 13:36 Maksim Kiselev [this message]
2023-12-17 13:36 ` [PATCH v1] thermal: sun8i: extend H6 calibration function to support 4 sensors Maksim Kiselev
2023-12-18 11:14 ` Andre Przywara
2023-12-18 11:14   ` Andre Przywara
2023-12-27 13:25   ` Daniel Lezcano
2023-12-27 13:25     ` Daniel Lezcano

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20231217133637.54773-1-bigunclemax@gmail.com \
    --to=bigunclemax@gmail.com \
    --cc=anarsoul@gmail.com \
    --cc=andre.przywara@arm.com \
    --cc=daniel.lezcano@linaro.org \
    --cc=jernej.skrabec@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-sunxi@lists.linux.dev \
    --cc=lukasz.luba@arm.com \
    --cc=martin.botka@somainline.org \
    --cc=rafael@kernel.org \
    --cc=rui.zhang@intel.com \
    --cc=samuel@sholland.org \
    --cc=tiny.windzz@gmail.com \
    --cc=wens@csie.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.