Re: [PATCH v4 04/15] PCI: imx6: Using "linux,pci-domain" as slot ID

From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Frank Li <Frank.Li@nxp.com>
Cc: krzysztof.kozlowski@linaro.org, bhelgaas@google.com,
	conor+dt@kernel.org, devicetree@vger.kernel.org,
	festevam@gmail.com, helgaas@kernel.org, hongxing.zhu@nxp.com,
	imx@lists.linux.dev, kernel@pengutronix.de,
	krzysztof.kozlowski+dt@linaro.org, kw@linux.com,
	l.stach@pengutronix.de, linux-arm-kernel@lists.infradead.org,
	linux-imx@nxp.com, linux-kernel@vger.kernel.org,
	linux-pci@vger.kernel.org, lpieralisi@kernel.org,
	robh@kernel.org, s.hauer@pengutronix.de, shawnguo@kernel.org
Subject: Re: [PATCH v4 04/15] PCI: imx6: Using "linux,pci-domain" as slot ID
Date: Sun, 17 Dec 2023 23:21:58 +0530	[thread overview]
Message-ID: <20231217175158.GF6748@thinkpad> (raw)
In-Reply-To: <20231217051210.754832-5-Frank.Li@nxp.com>

On Sun, Dec 17, 2023 at 12:11:59AM -0500, Frank Li wrote:
> Avoid use get slot id by compared with register physical address. If there
> are more than 2 slots, compared logic will become complex.
> 
> "linux,pci-domain" already exist at dts since first commit:
> 	commit (9e65987b9584d arm64: dts: imx8mp: Add iMX8MP PCIe support).
> 
> So it is safe to remove compare basic address code:

You should mark this property as "required" in the binding. Otherwise, drivers
cannot make assumptions.

> 	...
> 	if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> 		imx6_pcie->controller_id = 1;
> 	...
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
> 
> Notes:
>     Change from v3 to v4
>     - remove compare basic address logic
>     Change from v2 to v3
>     - none
>     Change from v1 to v2
>     - fix of_get_pci_domain_nr return value check logic
> 
>  drivers/pci/controller/dwc/pci-imx6.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index c1fb38a2ebeb6..7145947e21d92 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -33,6 +33,7 @@
>  #include <linux/pm_domain.h>
>  #include <linux/pm_runtime.h>
>  
> +#include "../../pci.h"
>  #include "pcie-designware.h"
>  
>  #define IMX8MQ_GPR_PCIE_REF_USE_PAD		BIT(9)
> @@ -40,7 +41,6 @@
>  #define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE	BIT(11)
>  #define IMX8MQ_GPR_PCIE_VREG_BYPASS		BIT(12)
>  #define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE	GENMASK(11, 8)
> -#define IMX8MQ_PCIE2_BASE_ADDR			0x33c00000
>  
>  #define to_imx6_pcie(x)	dev_get_drvdata((x)->dev)
>  
> @@ -1279,13 +1279,11 @@ static int imx6_pcie_probe(struct platform_device *pdev)
>  					     "Failed to get PCIEPHY reset control\n");
>  	}
>  
> -	switch (imx6_pcie->drvdata->variant) {
> -	case IMX7D:
> -		if (dbi_base->start == IMX8MQ_PCIE2_BASE_ADDR)
> -			imx6_pcie->controller_id = 1;
> -	default:
> -		break;
> -	}
> +	/* Using linux,pci-domain as PCI slot id */
> +	imx6_pcie->controller_id = of_get_pci_domain_nr(node);
> +	/* If there are not "linux,pci-domain" in dts file, means only 1 controller */

Only -EINVAL means the property is not present, other error codes means property
is present, but is not in good shape.

- Mani

> +	if (imx6_pcie->controller_id < 0)
> +		imx6_pcie->controller_id = 0;
>  
>  	/* Grab turnoff reset */
>  	imx6_pcie->turnoff_reset = devm_reset_control_get_optional_exclusive(dev, "turnoff");
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்