From: Peter Chen <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
luca.ceresoli@bootlin.com, jun.li@nxp.com,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on
Date: Fri, 22 Dec 2023 17:25:42 +0800 [thread overview]
Message-ID: <20231222092542.GC1951375@nchen-desktop> (raw)
In-Reply-To: <20231218061420.3460145-1-xu.yang_2@nxp.com>
On 23-12-18 14:14:18, Xu Yang wrote:
> Some platform using ChipIdea IP may keep 32KHz wakeup clock always
> on without usb driver intervention. And some may need driver to handle
> this clock. For now only i.MX93 needs this wakeup clock. This patch will
> get wakeup clock and keep it always on to make controller work properly.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
>
> ---
> Changes in v2:
> - modify commit msg to make it clear
> ---
> drivers/usb/chipidea/ci_hdrc_imx.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index e28bb2f2612d..4330be8240ff 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -96,6 +96,7 @@ struct ci_hdrc_imx_data {
> struct usb_phy *phy;
> struct platform_device *ci_pdev;
> struct clk *clk;
> + struct clk *clk_wakeup;
> struct imx_usbmisc_data *usbmisc_data;
> bool supports_runtime_pm;
> bool override_phy_control;
> @@ -199,7 +200,7 @@ static int imx_get_clks(struct device *dev)
>
> data->clk_ipg = devm_clk_get(dev, "ipg");
> if (IS_ERR(data->clk_ipg)) {
> - /* If the platform only needs one clocks */
> + /* If the platform only needs one primary clock */
> data->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(data->clk)) {
> ret = PTR_ERR(data->clk);
> @@ -208,6 +209,18 @@ static int imx_get_clks(struct device *dev)
> PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
> return ret;
> }
> + /* Get wakeup clock. Not all of the platforms need to
> + * handle this clock. So make it optional.
> + */
> + data->clk_wakeup = devm_clk_get_optional(dev,
> + "usb_wakeup_clk");
> + if (IS_ERR(data->clk_wakeup)) {
> + ret = PTR_ERR(data->clk_wakeup);
> + dev_err(dev,
> + "Failed to get wakeup clk, err=%ld\n",
> + PTR_ERR(data->clk_wakeup));
> + return ret;
> + }
> return ret;
> }
>
> @@ -423,6 +436,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
> if (ret)
> goto disable_hsic_regulator;
>
> + ret = clk_prepare_enable(data->clk_wakeup);
> + if (ret)
> + goto err_wakeup_clk;
> +
> data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
> if (IS_ERR(data->phy)) {
> ret = PTR_ERR(data->phy);
> @@ -504,6 +521,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
> disable_device:
> ci_hdrc_remove_device(data->ci_pdev);
> err_clk:
> + clk_disable_unprepare(data->clk_wakeup);
> +err_wakeup_clk:
> imx_disable_unprepare_clks(dev);
> disable_hsic_regulator:
> if (data->hsic_pad_regulator)
> @@ -530,6 +549,7 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev)
> usb_phy_shutdown(data->phy);
> if (data->ci_pdev) {
> imx_disable_unprepare_clks(&pdev->dev);
> + clk_disable_unprepare(data->clk_wakeup);
> if (data->plat_data->flags & CI_HDRC_PMQOS)
> cpu_latency_qos_remove_request(&data->pm_qos_req);
> if (data->hsic_pad_regulator)
> --
> 2.34.1
>
>
--
Thanks,
Peter Chen
WARNING: multiple messages have this Message-ID (diff)
From: Peter Chen <peter.chen@kernel.org>
To: Xu Yang <xu.yang_2@nxp.com>
Cc: gregkh@linuxfoundation.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
luca.ceresoli@bootlin.com, jun.li@nxp.com,
linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on
Date: Fri, 22 Dec 2023 17:25:42 +0800 [thread overview]
Message-ID: <20231222092542.GC1951375@nchen-desktop> (raw)
In-Reply-To: <20231218061420.3460145-1-xu.yang_2@nxp.com>
On 23-12-18 14:14:18, Xu Yang wrote:
> Some platform using ChipIdea IP may keep 32KHz wakeup clock always
> on without usb driver intervention. And some may need driver to handle
> this clock. For now only i.MX93 needs this wakeup clock. This patch will
> get wakeup clock and keep it always on to make controller work properly.
>
> Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
>
> ---
> Changes in v2:
> - modify commit msg to make it clear
> ---
> drivers/usb/chipidea/ci_hdrc_imx.c | 22 +++++++++++++++++++++-
> 1 file changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c
> index e28bb2f2612d..4330be8240ff 100644
> --- a/drivers/usb/chipidea/ci_hdrc_imx.c
> +++ b/drivers/usb/chipidea/ci_hdrc_imx.c
> @@ -96,6 +96,7 @@ struct ci_hdrc_imx_data {
> struct usb_phy *phy;
> struct platform_device *ci_pdev;
> struct clk *clk;
> + struct clk *clk_wakeup;
> struct imx_usbmisc_data *usbmisc_data;
> bool supports_runtime_pm;
> bool override_phy_control;
> @@ -199,7 +200,7 @@ static int imx_get_clks(struct device *dev)
>
> data->clk_ipg = devm_clk_get(dev, "ipg");
> if (IS_ERR(data->clk_ipg)) {
> - /* If the platform only needs one clocks */
> + /* If the platform only needs one primary clock */
> data->clk = devm_clk_get(dev, NULL);
> if (IS_ERR(data->clk)) {
> ret = PTR_ERR(data->clk);
> @@ -208,6 +209,18 @@ static int imx_get_clks(struct device *dev)
> PTR_ERR(data->clk), PTR_ERR(data->clk_ipg));
> return ret;
> }
> + /* Get wakeup clock. Not all of the platforms need to
> + * handle this clock. So make it optional.
> + */
> + data->clk_wakeup = devm_clk_get_optional(dev,
> + "usb_wakeup_clk");
> + if (IS_ERR(data->clk_wakeup)) {
> + ret = PTR_ERR(data->clk_wakeup);
> + dev_err(dev,
> + "Failed to get wakeup clk, err=%ld\n",
> + PTR_ERR(data->clk_wakeup));
> + return ret;
> + }
> return ret;
> }
>
> @@ -423,6 +436,10 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
> if (ret)
> goto disable_hsic_regulator;
>
> + ret = clk_prepare_enable(data->clk_wakeup);
> + if (ret)
> + goto err_wakeup_clk;
> +
> data->phy = devm_usb_get_phy_by_phandle(dev, "fsl,usbphy", 0);
> if (IS_ERR(data->phy)) {
> ret = PTR_ERR(data->phy);
> @@ -504,6 +521,8 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev)
> disable_device:
> ci_hdrc_remove_device(data->ci_pdev);
> err_clk:
> + clk_disable_unprepare(data->clk_wakeup);
> +err_wakeup_clk:
> imx_disable_unprepare_clks(dev);
> disable_hsic_regulator:
> if (data->hsic_pad_regulator)
> @@ -530,6 +549,7 @@ static void ci_hdrc_imx_remove(struct platform_device *pdev)
> usb_phy_shutdown(data->phy);
> if (data->ci_pdev) {
> imx_disable_unprepare_clks(&pdev->dev);
> + clk_disable_unprepare(data->clk_wakeup);
> if (data->plat_data->flags & CI_HDRC_PMQOS)
> cpu_latency_qos_remove_request(&data->pm_qos_req);
> if (data->hsic_pad_regulator)
> --
> 2.34.1
>
>
--
Thanks,
Peter Chen
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2023-12-22 9:25 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-12-18 6:14 [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on Xu Yang
2023-12-18 6:14 ` Xu Yang
2023-12-18 6:14 ` [PATCH v2 2/3] usb: chipidea: wait controller resume finished for wakeup irq Xu Yang
2023-12-18 6:14 ` Xu Yang
2023-12-22 3:41 ` Peter Chen
2023-12-22 3:41 ` Peter Chen
2023-12-18 6:14 ` [PATCH v2 3/3] usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host() Xu Yang
2023-12-18 6:14 ` Xu Yang
2023-12-22 9:28 ` Peter Chen
2023-12-22 9:28 ` Peter Chen
2023-12-22 3:40 ` [PATCH v2 1/3] usb: chipidea: ci_hdrc_imx: add wakeup clock and keep it always on Peter Chen
2023-12-22 3:40 ` Peter Chen
2023-12-22 8:24 ` [EXT] " Xu Yang
2023-12-22 8:24 ` Xu Yang
2023-12-22 9:25 ` Peter Chen [this message]
2023-12-22 9:25 ` Peter Chen
2023-12-22 12:26 ` Stefan Wahren
2023-12-22 12:26 ` Stefan Wahren
2023-12-25 2:20 ` [EXT] " Xu Yang
2023-12-25 2:20 ` Xu Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20231222092542.GC1951375@nchen-desktop \
--to=peter.chen@kernel.org \
--cc=festevam@gmail.com \
--cc=gregkh@linuxfoundation.org \
--cc=jun.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=xu.yang_2@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.