All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms@kernel.org>
To: Dimitri Fedrau <dima.fedrau@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>,
	Heiner Kallweit <hkallweit1@gmail.com>,
	Russell King <linux@armlinux.org.uk>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Stefan Eichenberger <eichest@gmail.com>,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 net-next 5/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY
Date: Mon, 8 Jan 2024 11:08:44 +0000	[thread overview]
Message-ID: <20240108110844.GH132648@kernel.org> (raw)
In-Reply-To: <20240108093702.13476-6-dima.fedrau@gmail.com>

On Mon, Jan 08, 2024 at 10:37:00AM +0100, Dimitri Fedrau wrote:
> Add a driver for the Marvell 88Q2220. This driver allows to detect the
> link, switch between 100BASE-T1 and 1000BASE-T1 and switch between
> master and slave mode. Autonegoation is supported.

nit: Autonegotiation

> Signed-off-by: Dimitri Fedrau <dima.fedrau@gmail.com>
> ---
>  drivers/net/phy/marvell-88q2xxx.c | 206 +++++++++++++++++++++++++++++-
>  include/linux/marvell_phy.h       |   1 +
>  2 files changed, 201 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/net/phy/marvell-88q2xxx.c b/drivers/net/phy/marvell-88q2xxx.c

...

> @@ -29,6 +36,42 @@
>  
>  #define MDIO_MMD_PCS_MV_RX_STAT			33328
>  
> +struct mmd_val {
> +	int devad;
> +	u32 regnum;
> +	u16 val;
> +};
> +
> +const struct mmd_val mv88q222x_revb0_init_seq0[] = {
> +	{ MDIO_MMD_PCS, 0x8033, 0x6801 },
> +	{ MDIO_MMD_AN, MDIO_AN_T1_CTRL, 0x0 },
> +	{ MDIO_MMD_PMAPMD, MDIO_CTRL1,
> +	  MDIO_CTRL1_LPOWER | MDIO_PMA_CTRL1_SPEED1000 },
> +	{ MDIO_MMD_PCS, 0xfe1b, 0x48 },
> +	{ MDIO_MMD_PCS, 0xffe4, 0x6b6 },
> +	{ MDIO_MMD_PMAPMD, MDIO_CTRL1, 0x0 },
> +	{ MDIO_MMD_PCS, MDIO_CTRL1, 0x0 },
> +};
> +
> +const struct mmd_val mv88q222x_revb0_init_seq1[] = {
> +	{ MDIO_MMD_PCS, 0xfe79, 0x0 },
> +	{ MDIO_MMD_PCS, 0xfe07, 0x125a },
> +	{ MDIO_MMD_PCS, 0xfe09, 0x1288 },
> +	{ MDIO_MMD_PCS, 0xfe08, 0x2588 },
> +	{ MDIO_MMD_PCS, 0xfe11, 0x1105 },
> +	{ MDIO_MMD_PCS, 0xfe72, 0x042c },
> +	{ MDIO_MMD_PCS, 0xfbba, 0xcb2 },
> +	{ MDIO_MMD_PCS, 0xfbbb, 0xc4a },
> +	{ MDIO_MMD_AN, 0x8032, 0x2020 },
> +	{ MDIO_MMD_AN, 0x8031, 0xa28 },
> +	{ MDIO_MMD_AN, 0x8031, 0xc28 },
> +	{ MDIO_MMD_PCS, 0xffdb, 0xfc10 },
> +	{ MDIO_MMD_PCS, 0xfe1b, 0x58 },
> +	{ MDIO_MMD_PCS, 0xfe79, 0x4 },
> +	{ MDIO_MMD_PCS, 0xfe5f, 0xe8 },
> +	{ MDIO_MMD_PCS, 0xfe05, 0x755c },
> +};

nit: mv88q222x_revb0_init_seq0 and mv88q222x_revb0_init_seq1 seem
    to only be used in this file. Perhaps they should be static.

...

  reply	other threads:[~2024-01-08 11:08 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-08  9:36 [PATCH v4 net-next 0/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY Dimitri Fedrau
2024-01-08  9:36 ` [PATCH v4 net-next 1/5] net: phy: Add BaseT1 auto-negotiation constants Dimitri Fedrau
2024-01-08 13:49   ` Andrew Lunn
2024-01-08 14:25     ` Dimitri Fedrau
2024-01-08  9:36 ` [PATCH v4 net-next 2/5] net: phy: Support 100/1000BT1 linkmode advertisements Dimitri Fedrau
2024-01-08  9:36 ` [PATCH v4 net-next 3/5] net: phy: c45: detect 100/1000BASE-T1 " Dimitri Fedrau
2024-01-08  9:36 ` [PATCH v4 net-next 4/5] net: phy: marvell-88q2xxx: fix typos Dimitri Fedrau
2024-01-08 14:02   ` Andrew Lunn
2024-01-08 14:31     ` Dimitri Fedrau
2024-01-08 14:05   ` Andrew Lunn
2024-01-08  9:37 ` [PATCH v4 net-next 5/5] net: phy: marvell-88q2xxx: add driver for the Marvell 88Q2220 PHY Dimitri Fedrau
2024-01-08 11:08   ` Simon Horman [this message]
2024-01-08 11:16     ` Dimitri Fedrau
2024-01-11 13:49   ` kernel test robot
2024-01-08 11:18 ` [PATCH v4 net-next 0/5] " Heiner Kallweit
2024-01-08 11:24   ` Dimitri Fedrau
2024-01-08 11:28     ` Heiner Kallweit

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240108110844.GH132648@kernel.org \
    --to=horms@kernel.org \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=dima.fedrau@gmail.com \
    --cc=edumazet@google.com \
    --cc=eichest@gmail.com \
    --cc=hkallweit1@gmail.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.