[PATCH 0/2] Add Phytec i.MX93 Segin support

All of lore.kernel.org
 help / color / mirror / Atom feed

* [PATCH 0/2] Add Phytec i.MX93 Segin support
@ 2024-01-16 11:39 ` Mathieu Othacehe
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Hello,

This adds support for the Phytec i.MX93 Segin board.

Thanks,

Mathieu

Mathieu Othacehe (2):
  dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
  arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin

 .../devicetree/bindings/arm/fsl.yaml          |  6 ++
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 92 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 54 +++++++++++
 4 files changed, 153 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

-- 
2.41.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 0/2] Add Phytec i.MX93 Segin support
@ 2024-01-16 11:39 ` Mathieu Othacehe
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Hello,

This adds support for the Phytec i.MX93 Segin board.

Thanks,

Mathieu

Mathieu Othacehe (2):
  dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
  arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin

 .../devicetree/bindings/arm/fsl.yaml          |  6 ++
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 92 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 54 +++++++++++
 4 files changed, 153 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

-- 
2.41.0


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
  2024-01-16 11:39 ` Mathieu Othacehe
@ 2024-01-16 11:39   ` Mathieu Othacehe
  -1 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Add support for i.MX93 PHYTEC with Segin board.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..196935d3abf0 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1275,6 +1275,12 @@ properties:
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
           - const: fsl,imx93
 
+      - description: i.MX93 PHYTEC phyBOARD-Segin
+        items:
+          - const: phytec,imx93-phycore-segin
+          - const: phytec,imx93-phycore-som
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
-- 
2.41.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
@ 2024-01-16 11:39   ` Mathieu Othacehe
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Add support for i.MX93 PHYTEC with Segin board.

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/fsl.yaml b/Documentation/devicetree/bindings/arm/fsl.yaml
index 228dcc5c7d6f..196935d3abf0 100644
--- a/Documentation/devicetree/bindings/arm/fsl.yaml
+++ b/Documentation/devicetree/bindings/arm/fsl.yaml
@@ -1275,6 +1275,12 @@ properties:
           - const: tq,imx93-tqma9352        # TQ-Systems GmbH i.MX93 TQMa93xxCA/LA SOM
           - const: fsl,imx93
 
+      - description: i.MX93 PHYTEC phyBOARD-Segin
+        items:
+          - const: phytec,imx93-phycore-segin
+          - const: phytec,imx93-phycore-som
+          - const: fsl,imx93
+
       - description:
           Freescale Vybrid Platform Device Tree Bindings
 
-- 
2.41.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
  2024-01-16 11:39   ` Mathieu Othacehe
@ 2024-01-16 12:16     ` Krzysztof Kozlowski
  -1 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-16 12:16 UTC (permalink / raw)
  To: Mathieu Othacehe, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel

On 16/01/2024 12:39, Mathieu Othacehe wrote:
> Add support for i.MX93 PHYTEC with Segin board.
> 
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin
@ 2024-01-16 12:16     ` Krzysztof Kozlowski
  0 siblings, 0 replies; 12+ messages in thread
From: Krzysztof Kozlowski @ 2024-01-16 12:16 UTC (permalink / raw)
  To: Mathieu Othacehe, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel

On 16/01/2024 12:39, Mathieu Othacehe wrote:
> Add support for i.MX93 PHYTEC with Segin board.
> 
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
> ---
>  Documentation/devicetree/bindings/arm/fsl.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof


^ permalink raw reply	[flat|nested] 12+ messages in thread

* [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
  2024-01-16 11:39 ` Mathieu Othacehe
@ 2024-01-16 11:39   ` Mathieu Othacehe
  -1 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
i.MX93 on Segin evaluation board.

This version comes with:
 - 1GB LPDDR4 RAM
 - external SD
 - debug UART
 - 1x 100Mbit Ethernet

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 51 ++++++++++
 3 files changed, 145 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2e027675d7bb..6cb6d9f8783e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
new file mode 100644
index 000000000000..2277d97fc3c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin",
+		     "phytec,imx93-phycore-som", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..7a9ff998a342
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+};
-- 
2.41.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply related	[flat|nested] 12+ messages in thread

* [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
@ 2024-01-16 11:39   ` Mathieu Othacehe
  0 siblings, 0 replies; 12+ messages in thread
From: Mathieu Othacehe @ 2024-01-16 11:39 UTC (permalink / raw)
  To: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Mathieu Othacehe

Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
i.MX93 on Segin evaluation board.

This version comes with:
 - 1GB LPDDR4 RAM
 - external SD
 - debug UART
 - 1x 100Mbit Ethernet

Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
---
 arch/arm64/boot/dts/freescale/Makefile        |  1 +
 .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
 .../boot/dts/freescale/imx93-phycore-som.dtsi | 51 ++++++++++
 3 files changed, 145 insertions(+)
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
 create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi

diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 2e027675d7bb..6cb6d9f8783e 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
new file mode 100644
index 000000000000..2277d97fc3c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
@@ -0,0 +1,93 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93-phycore-som.dtsi"
+
+/{
+	model = "PHYTEC phyBOARD-Segin-i.MX93";
+	compatible = "phytec,imx93-phycore-segin",
+		     "phytec,imx93-phycore-som", "fsl,imx93";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+/* Console */
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+/* SD-Card */
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+	no-sdio;
+	no-mmc;
+};
+
+/* Watchdog */
+&wdog3 {
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	status = "okay";
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
+			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
+			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
+			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
+			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
+			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
+			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
+			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
new file mode 100644
index 000000000000..7a9ff998a342
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2023 PHYTEC Messtechnik GmbH
+ * Christoph Stoidner <c.stoidner@phytec.de>
+ * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ */
+/dts-v1/;
+
+#include "imx93.dtsi"
+
+/{
+	model = "PHYTEC phyCORE-i.MX93";
+	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+	};
+};
+
+/* eMMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
+			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
+			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
+			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
+			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
+			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
+			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
+			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
+			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
+			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
+			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
+		>;
+	};
+
+};
-- 
2.41.0


^ permalink raw reply related	[flat|nested] 12+ messages in thread

* Re: [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
  2024-01-16 11:39   ` Mathieu Othacehe
@ 2024-01-16 14:07     ` Fabio Estevam
  -1 siblings, 0 replies; 12+ messages in thread
From: Fabio Estevam @ 2024-01-16 14:07 UTC (permalink / raw)
  To: Mathieu Othacehe
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team, Li Yang,
	Stefan Wahren, devicetree, linux-kernel, linux-arm-kernel

On Tue, Jan 16, 2024 at 8:39 AM Mathieu Othacehe <othacehe@gnu.org> wrote:

> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..6cb6d9f8783e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb

Please keep this in alphabetical order.

> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> +       model = "PHYTEC phyBOARD-Segin-i.MX93";
> +       compatible = "phytec,imx93-phycore-segin",
> +                    "phytec,imx93-phycore-som", "fsl,imx93";

Can't the compatible be in a single line?

> +       model = "PHYTEC phyCORE-i.MX93";
> +       compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +       reserved-memory {
> +               ranges;
> +               #address-cells = <2>;
> +               #size-cells = <2>;

Is this needed?

> +&iomuxc {
> +       pinctrl_usdhc1: usdhc1grp {
> +               fsl,pins = <
> +                       MX93_PAD_SD1_CLK__USDHC1_CLK            0x15fe
> +                       MX93_PAD_SD1_CMD__USDHC1_CMD            0x13fe
> +                       MX93_PAD_SD1_DATA0__USDHC1_DATA0        0x13fe
> +                       MX93_PAD_SD1_DATA1__USDHC1_DATA1        0x13fe
> +                       MX93_PAD_SD1_DATA2__USDHC1_DATA2        0x13fe
> +                       MX93_PAD_SD1_DATA3__USDHC1_DATA3        0x13fe
> +                       MX93_PAD_SD1_DATA4__USDHC1_DATA4        0x13fe
> +                       MX93_PAD_SD1_DATA5__USDHC1_DATA5        0x13fe
> +                       MX93_PAD_SD1_DATA6__USDHC1_DATA6        0x13fe
> +                       MX93_PAD_SD1_DATA7__USDHC1_DATA7        0x13fe
> +                       MX93_PAD_SD1_STROBE__USDHC1_STROBE      0x15fe
> +               >;
> +       };
> +

Please remove this blank line.
> +};

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
@ 2024-01-16 14:07     ` Fabio Estevam
  0 siblings, 0 replies; 12+ messages in thread
From: Fabio Estevam @ 2024-01-16 14:07 UTC (permalink / raw)
  To: Mathieu Othacehe
  Cc: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Shawn Guo,
	Sascha Hauer, Pengutronix Kernel Team, NXP Linux Team, Li Yang,
	Stefan Wahren, devicetree, linux-kernel, linux-arm-kernel

On Tue, Jan 16, 2024 at 8:39 AM Mathieu Othacehe <othacehe@gnu.org> wrote:

> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..6cb6d9f8783e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>  dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb

Please keep this in alphabetical order.

> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> +       model = "PHYTEC phyBOARD-Segin-i.MX93";
> +       compatible = "phytec,imx93-phycore-segin",
> +                    "phytec,imx93-phycore-som", "fsl,imx93";

Can't the compatible be in a single line?

> +       model = "PHYTEC phyCORE-i.MX93";
> +       compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +       reserved-memory {
> +               ranges;
> +               #address-cells = <2>;
> +               #size-cells = <2>;

Is this needed?

> +&iomuxc {
> +       pinctrl_usdhc1: usdhc1grp {
> +               fsl,pins = <
> +                       MX93_PAD_SD1_CLK__USDHC1_CLK            0x15fe
> +                       MX93_PAD_SD1_CMD__USDHC1_CMD            0x13fe
> +                       MX93_PAD_SD1_DATA0__USDHC1_DATA0        0x13fe
> +                       MX93_PAD_SD1_DATA1__USDHC1_DATA1        0x13fe
> +                       MX93_PAD_SD1_DATA2__USDHC1_DATA2        0x13fe
> +                       MX93_PAD_SD1_DATA3__USDHC1_DATA3        0x13fe
> +                       MX93_PAD_SD1_DATA4__USDHC1_DATA4        0x13fe
> +                       MX93_PAD_SD1_DATA5__USDHC1_DATA5        0x13fe
> +                       MX93_PAD_SD1_DATA6__USDHC1_DATA6        0x13fe
> +                       MX93_PAD_SD1_DATA7__USDHC1_DATA7        0x13fe
> +                       MX93_PAD_SD1_STROBE__USDHC1_STROBE      0x15fe
> +               >;
> +       };
> +

Please remove this blank line.
> +};

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
  2024-01-16 11:39   ` Mathieu Othacehe
@ 2024-01-17  7:00     ` Wadim Egorov
  -1 siblings, 0 replies; 12+ messages in thread
From: Wadim Egorov @ 2024-01-17  7:00 UTC (permalink / raw)
  To: Mathieu Othacehe, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Christoph Stoidner,
	upstream

Hi,

would be nice if you could include the author to CC.

CC'ing Christoph.

Regards,
Wadim

Am 16.01.24 um 12:39 schrieb Mathieu Othacehe:
> Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
> i.MX93 on Segin evaluation board.
>
> This version comes with:
>   - 1GB LPDDR4 RAM
>   - external SD
>   - debug UART
>   - 1x 100Mbit Ethernet
>
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
> ---
>   arch/arm64/boot/dts/freescale/Makefile        |  1 +
>   .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
>   .../boot/dts/freescale/imx93-phycore-som.dtsi | 51 ++++++++++
>   3 files changed, 145 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..6cb6d9f8783e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
>   
>   imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
>   imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
> new file mode 100644
> index 000000000000..2277d97fc3c4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner@phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
> + *
> + */
> +/dts-v1/;
> +
> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> +	model = "PHYTEC phyBOARD-Segin-i.MX93";
> +	compatible = "phytec,imx93-phycore-segin",
> +		     "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +	chosen {
> +		stdout-path = &lpuart1;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +/* Console */
> +&lpuart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +/* SD-Card */
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	bus-width = <4>;
> +	status = "okay";
> +	no-sdio;
> +	no-mmc;
> +};
> +
> +/* Watchdog */
> +&wdog3 {
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
> +			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
> +			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
> +			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
> +			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
> +			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
> +			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
> +			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
> +		>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> new file mode 100644
> index 000000000000..7a9ff998a342
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner@phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
> + *
> + */
> +/dts-v1/;
> +
> +#include "imx93.dtsi"
> +
> +/{
> +	model = "PHYTEC phyCORE-i.MX93";
> +	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +	reserved-memory {
> +		ranges;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +	};
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1>;
> +	pinctrl-2 = <&pinctrl_usdhc1>;
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
> +			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
> +			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
> +			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
> +			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
> +			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
> +			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
> +			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
> +			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
> +			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
> +			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
> +		>;
> +	};
> +
> +};

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

^ permalink raw reply	[flat|nested] 12+ messages in thread

* Re: [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin
@ 2024-01-17  7:00     ` Wadim Egorov
  0 siblings, 0 replies; 12+ messages in thread
From: Wadim Egorov @ 2024-01-17  7:00 UTC (permalink / raw)
  To: Mathieu Othacehe, Rob Herring, Krzysztof Kozlowski, Conor Dooley,
	Shawn Guo, Sascha Hauer, Pengutronix Kernel Team, Fabio Estevam,
	NXP Linux Team, Li Yang, Stefan Wahren
  Cc: devicetree, linux-kernel, linux-arm-kernel, Christoph Stoidner,
	upstream

Hi,

would be nice if you could include the author to CC.

CC'ing Christoph.

Regards,
Wadim

Am 16.01.24 um 12:39 schrieb Mathieu Othacehe:
> Add DTSI for Phytec i.MX93 System on Module and DTS for Phytec
> i.MX93 on Segin evaluation board.
>
> This version comes with:
>   - 1GB LPDDR4 RAM
>   - external SD
>   - debug UART
>   - 1x 100Mbit Ethernet
>
> Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
> ---
>   arch/arm64/boot/dts/freescale/Makefile        |  1 +
>   .../dts/freescale/imx93-phycore-segin.dts     | 93 +++++++++++++++++++
>   .../boot/dts/freescale/imx93-phycore-som.dtsi | 51 ++++++++++
>   3 files changed, 145 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
>   create mode 100644 arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
>
> diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
> index 2e027675d7bb..6cb6d9f8783e 100644
> --- a/arch/arm64/boot/dts/freescale/Makefile
> +++ b/arch/arm64/boot/dts/freescale/Makefile
> @@ -203,6 +203,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-11x11-evk.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxca.dtb
>   dtb-$(CONFIG_ARCH_MXC) += imx93-tqma9352-mba93xxla.dtb
> +dtb-$(CONFIG_ARCH_MXC) += imx93-phycore-segin.dtb
>   
>   imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
>   imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
> new file mode 100644
> index 000000000000..2277d97fc3c4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-segin.dts
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner@phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
> + *
> + */
> +/dts-v1/;
> +
> +#include "imx93-phycore-som.dtsi"
> +
> +/{
> +	model = "PHYTEC phyBOARD-Segin-i.MX93";
> +	compatible = "phytec,imx93-phycore-segin",
> +		     "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +	chosen {
> +		stdout-path = &lpuart1;
> +	};
> +
> +	reg_usdhc2_vmmc: regulator-usdhc2 {
> +		compatible = "regulator-fixed";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
> +		regulator-name = "VSD_3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +};
> +
> +/* Console */
> +&lpuart1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_uart1>;
> +	status = "okay";
> +};
> +
> +/* SD-Card */
> +&usdhc2 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	pinctrl-2 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
> +	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
> +	vmmc-supply = <&reg_usdhc2_vmmc>;
> +	bus-width = <4>;
> +	status = "okay";
> +	no-sdio;
> +	no-mmc;
> +};
> +
> +/* Watchdog */
> +&wdog3 {
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl-names = "default";
> +	status = "okay";
> +
> +	pinctrl_uart1: uart1grp {
> +		fsl,pins = <
> +			MX93_PAD_UART1_RXD__LPUART1_RX			0x31e
> +			MX93_PAD_UART1_TXD__LPUART1_TX			0x31e
> +		>;
> +	};
> +
> +	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_RESET_B__GPIO3_IO07		0x31e
> +		>;
> +	};
> +
> +	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_CD_B__GPIO3_IO00			0x31e
> +		>;
> +	};
> +
> +	pinctrl_usdhc2: usdhc2grp {
> +		fsl,pins = <
> +			MX93_PAD_SD2_CLK__USDHC2_CLK			0x178e
> +			MX93_PAD_SD2_CMD__USDHC2_CMD			0x139e
> +			MX93_PAD_SD2_DATA0__USDHC2_DATA0		0x138e
> +			MX93_PAD_SD2_DATA1__USDHC2_DATA1		0x138e
> +			MX93_PAD_SD2_DATA2__USDHC2_DATA2		0x138e
> +			MX93_PAD_SD2_DATA3__USDHC2_DATA3		0x139e
> +			MX93_PAD_SD2_VSELECT__USDHC2_VSELECT		0x51e
> +		>;
> +	};
> +};
> diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> new file mode 100644
> index 000000000000..7a9ff998a342
> --- /dev/null
> +++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
> @@ -0,0 +1,51 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (C) 2023 PHYTEC Messtechnik GmbH
> + * Christoph Stoidner <c.stoidner@phytec.de>
> + * Copyright (C) 2024 Mathieu Othacehe <m.othacehe@gmail.com>
> + *
> + */
> +/dts-v1/;
> +
> +#include "imx93.dtsi"
> +
> +/{
> +	model = "PHYTEC phyCORE-i.MX93";
> +	compatible = "phytec,imx93-phycore-som", "fsl,imx93";
> +
> +	reserved-memory {
> +		ranges;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +	};
> +};
> +
> +/* eMMC */
> +&usdhc1 {
> +	pinctrl-names = "default", "state_100mhz", "state_200mhz";
> +	pinctrl-0 = <&pinctrl_usdhc1>;
> +	pinctrl-1 = <&pinctrl_usdhc1>;
> +	pinctrl-2 = <&pinctrl_usdhc1>;
> +	bus-width = <8>;
> +	non-removable;
> +	status = "okay";
> +};
> +
> +&iomuxc {
> +	pinctrl_usdhc1: usdhc1grp {
> +		fsl,pins = <
> +			MX93_PAD_SD1_CLK__USDHC1_CLK		0x15fe
> +			MX93_PAD_SD1_CMD__USDHC1_CMD		0x13fe
> +			MX93_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe
> +			MX93_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe
> +			MX93_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe
> +			MX93_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe
> +			MX93_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe
> +			MX93_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe
> +			MX93_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe
> +			MX93_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe
> +			MX93_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe
> +		>;
> +	};
> +
> +};

^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2024-01-17  7:01 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-01-16 11:39 [PATCH 0/2] Add Phytec i.MX93 Segin support Mathieu Othacehe
2024-01-16 11:39 ` Mathieu Othacehe
2024-01-16 11:39 ` [PATCH 1/2] dt-bindings: arm: fsl: Add i.MX93 PHYTEC with Segin Mathieu Othacehe
2024-01-16 11:39   ` Mathieu Othacehe
2024-01-16 12:16   ` Krzysztof Kozlowski
2024-01-16 12:16     ` Krzysztof Kozlowski
2024-01-16 11:39 ` [PATCH 2/2] arm64: dts: imx93-phycore-segin: Add Phytec i.MX93 Segin Mathieu Othacehe
2024-01-16 11:39   ` Mathieu Othacehe
2024-01-16 14:07   ` Fabio Estevam
2024-01-16 14:07     ` Fabio Estevam
2024-01-17  7:00   ` Wadim Egorov
2024-01-17  7:00     ` Wadim Egorov

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.