From: Sunil V L <sunilvl@ventanamicro.com>
To: linux-pm@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: "Rafael J . Wysocki" <rafael@kernel.org>,
Pavel Machek <pavel@ucw.cz>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>, Len Brown <lenb@kernel.org>,
Anup Patel <anup@brainfault.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Andrew Jones <ajones@ventanamicro.com>,
Conor Dooley <conor.dooley@microchip.com>,
Atish Kumar Patra <atishp@rivosinc.com>,
Sunil V L <sunilvl@ventanamicro.com>
Subject: [PATCH v3 -next 1/3] cpuidle: RISC-V: Move few functions to arch/riscv
Date: Thu, 18 Jan 2024 11:59:28 +0530 [thread overview]
Message-ID: <20240118062930.245937-2-sunilvl@ventanamicro.com> (raw)
In-Reply-To: <20240118062930.245937-1-sunilvl@ventanamicro.com>
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
arch/riscv/include/asm/suspend.h | 3 ++
arch/riscv/kernel/suspend.c | 49 +++++++++++++++++++++++++++++
drivers/cpuidle/cpuidle-riscv-sbi.c | 49 +++--------------------------
3 files changed, 57 insertions(+), 44 deletions(-)
diff --git a/arch/riscv/include/asm/suspend.h b/arch/riscv/include/asm/suspend.h
index 02f87867389a..076f8a9437cf 100644
--- a/arch/riscv/include/asm/suspend.h
+++ b/arch/riscv/include/asm/suspend.h
@@ -55,4 +55,7 @@ int hibernate_resume_nonboot_cpu_disable(void);
asmlinkage void hibernate_restore_image(unsigned long resume_satp, unsigned long satp_temp,
unsigned long cpu_resume);
asmlinkage int hibernate_core_restore_code(void);
+bool riscv_sbi_hsm_is_supported(void);
+bool riscv_sbi_suspend_state_is_valid(u32 state);
+int riscv_sbi_hart_suspend(u32 state);
#endif
diff --git a/arch/riscv/kernel/suspend.c b/arch/riscv/kernel/suspend.c
index 239509367e42..b20f2cb5879f 100644
--- a/arch/riscv/kernel/suspend.c
+++ b/arch/riscv/kernel/suspend.c
@@ -128,4 +128,53 @@ static int __init sbi_system_suspend_init(void)
}
arch_initcall(sbi_system_suspend_init);
+
+static int sbi_suspend_finisher(unsigned long suspend_type,
+ unsigned long resume_addr,
+ unsigned long opaque)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
+ suspend_type, resume_addr, opaque, 0, 0, 0);
+
+ return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
+}
+
+int riscv_sbi_hart_suspend(u32 state)
+{
+ if (state & SBI_HSM_SUSP_NON_RET_BIT)
+ return cpu_suspend(state, sbi_suspend_finisher);
+ else
+ return sbi_suspend_finisher(state, 0, 0);
+}
+
+bool riscv_sbi_suspend_state_is_valid(u32 state)
+{
+ if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_RET_PLATFORM)
+ return false;
+
+ if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
+ return false;
+
+ return true;
+}
+
+bool riscv_sbi_hsm_is_supported(void)
+{
+ /*
+ * The SBI HSM suspend function is only available when:
+ * 1) SBI version is 0.3 or higher
+ * 2) SBI HSM extension is available
+ */
+ if (sbi_spec_version < sbi_mk_version(0, 3) ||
+ !sbi_probe_extension(SBI_EXT_HSM)) {
+ pr_info("HSM suspend not available\n");
+ return false;
+ }
+
+ return true;
+}
#endif /* CONFIG_RISCV_SBI */
diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c
index e8094fc92491..a6e123dfe394 100644
--- a/drivers/cpuidle/cpuidle-riscv-sbi.c
+++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
@@ -73,26 +73,6 @@ static inline bool sbi_is_domain_state_available(void)
return data->available;
}
-static int sbi_suspend_finisher(unsigned long suspend_type,
- unsigned long resume_addr,
- unsigned long opaque)
-{
- struct sbiret ret;
-
- ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
- suspend_type, resume_addr, opaque, 0, 0, 0);
-
- return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
-}
-
-static int sbi_suspend(u32 state)
-{
- if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return cpu_suspend(state, sbi_suspend_finisher);
- else
- return sbi_suspend_finisher(state, 0, 0);
-}
-
static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
@@ -100,9 +80,9 @@ static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
u32 state = states[idx];
if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, state);
+ return CPU_PM_CPU_IDLE_ENTER_PARAM(riscv_sbi_hart_suspend, idx, state);
else
- return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(sbi_suspend,
+ return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(riscv_sbi_hart_suspend,
idx, state);
}
@@ -133,7 +113,7 @@ static __cpuidle int __sbi_enter_domain_idle_state(struct cpuidle_device *dev,
else
state = states[idx];
- ret = sbi_suspend(state) ? -1 : idx;
+ ret = riscv_sbi_hart_suspend(state) ? -1 : idx;
ct_cpuidle_exit();
@@ -206,17 +186,6 @@ static const struct of_device_id sbi_cpuidle_state_match[] = {
{ },
};
-static bool sbi_suspend_state_is_valid(u32 state)
-{
- if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_RET_PLATFORM)
- return false;
- if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
- return false;
- return true;
-}
-
static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
{
int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state);
@@ -226,7 +195,7 @@ static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
return err;
}
- if (!sbi_suspend_state_is_valid(*state)) {
+ if (!riscv_sbi_suspend_state_is_valid(*state)) {
pr_warn("Invalid SBI suspend state %#x\n", *state);
return -EINVAL;
}
@@ -607,16 +576,8 @@ static int __init sbi_cpuidle_init(void)
int ret;
struct platform_device *pdev;
- /*
- * The SBI HSM suspend function is only available when:
- * 1) SBI version is 0.3 or higher
- * 2) SBI HSM extension is available
- */
- if ((sbi_spec_version < sbi_mk_version(0, 3)) ||
- !sbi_probe_extension(SBI_EXT_HSM)) {
- pr_info("HSM suspend not available\n");
+ if (!riscv_sbi_hsm_is_supported())
return 0;
- }
ret = platform_driver_register(&sbi_cpuidle_driver);
if (ret)
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Sunil V L <sunilvl@ventanamicro.com>
To: linux-pm@vger.kernel.org, linux-riscv@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org
Cc: Albert Ou <aou@eecs.berkeley.edu>,
"Rafael J . Wysocki" <rafael@kernel.org>,
Anup Patel <anup@brainfault.org>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Atish Kumar Patra <atishp@rivosinc.com>,
Conor Dooley <conor.dooley@microchip.com>,
Palmer Dabbelt <palmer@dabbelt.com>, Pavel Machek <pavel@ucw.cz>,
Paul Walmsley <paul.walmsley@sifive.com>,
Andrew Jones <ajones@ventanamicro.com>,
Len Brown <lenb@kernel.org>
Subject: [PATCH v3 -next 1/3] cpuidle: RISC-V: Move few functions to arch/riscv
Date: Thu, 18 Jan 2024 11:59:28 +0530 [thread overview]
Message-ID: <20240118062930.245937-2-sunilvl@ventanamicro.com> (raw)
In-Reply-To: <20240118062930.245937-1-sunilvl@ventanamicro.com>
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
---
arch/riscv/include/asm/suspend.h | 3 ++
arch/riscv/kernel/suspend.c | 49 +++++++++++++++++++++++++++++
drivers/cpuidle/cpuidle-riscv-sbi.c | 49 +++--------------------------
3 files changed, 57 insertions(+), 44 deletions(-)
diff --git a/arch/riscv/include/asm/suspend.h b/arch/riscv/include/asm/suspend.h
index 02f87867389a..076f8a9437cf 100644
--- a/arch/riscv/include/asm/suspend.h
+++ b/arch/riscv/include/asm/suspend.h
@@ -55,4 +55,7 @@ int hibernate_resume_nonboot_cpu_disable(void);
asmlinkage void hibernate_restore_image(unsigned long resume_satp, unsigned long satp_temp,
unsigned long cpu_resume);
asmlinkage int hibernate_core_restore_code(void);
+bool riscv_sbi_hsm_is_supported(void);
+bool riscv_sbi_suspend_state_is_valid(u32 state);
+int riscv_sbi_hart_suspend(u32 state);
#endif
diff --git a/arch/riscv/kernel/suspend.c b/arch/riscv/kernel/suspend.c
index 239509367e42..b20f2cb5879f 100644
--- a/arch/riscv/kernel/suspend.c
+++ b/arch/riscv/kernel/suspend.c
@@ -128,4 +128,53 @@ static int __init sbi_system_suspend_init(void)
}
arch_initcall(sbi_system_suspend_init);
+
+static int sbi_suspend_finisher(unsigned long suspend_type,
+ unsigned long resume_addr,
+ unsigned long opaque)
+{
+ struct sbiret ret;
+
+ ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
+ suspend_type, resume_addr, opaque, 0, 0, 0);
+
+ return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
+}
+
+int riscv_sbi_hart_suspend(u32 state)
+{
+ if (state & SBI_HSM_SUSP_NON_RET_BIT)
+ return cpu_suspend(state, sbi_suspend_finisher);
+ else
+ return sbi_suspend_finisher(state, 0, 0);
+}
+
+bool riscv_sbi_suspend_state_is_valid(u32 state)
+{
+ if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_RET_PLATFORM)
+ return false;
+
+ if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
+ state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
+ return false;
+
+ return true;
+}
+
+bool riscv_sbi_hsm_is_supported(void)
+{
+ /*
+ * The SBI HSM suspend function is only available when:
+ * 1) SBI version is 0.3 or higher
+ * 2) SBI HSM extension is available
+ */
+ if (sbi_spec_version < sbi_mk_version(0, 3) ||
+ !sbi_probe_extension(SBI_EXT_HSM)) {
+ pr_info("HSM suspend not available\n");
+ return false;
+ }
+
+ return true;
+}
#endif /* CONFIG_RISCV_SBI */
diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c
index e8094fc92491..a6e123dfe394 100644
--- a/drivers/cpuidle/cpuidle-riscv-sbi.c
+++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
@@ -73,26 +73,6 @@ static inline bool sbi_is_domain_state_available(void)
return data->available;
}
-static int sbi_suspend_finisher(unsigned long suspend_type,
- unsigned long resume_addr,
- unsigned long opaque)
-{
- struct sbiret ret;
-
- ret = sbi_ecall(SBI_EXT_HSM, SBI_EXT_HSM_HART_SUSPEND,
- suspend_type, resume_addr, opaque, 0, 0, 0);
-
- return (ret.error) ? sbi_err_map_linux_errno(ret.error) : 0;
-}
-
-static int sbi_suspend(u32 state)
-{
- if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return cpu_suspend(state, sbi_suspend_finisher);
- else
- return sbi_suspend_finisher(state, 0, 0);
-}
-
static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int idx)
{
@@ -100,9 +80,9 @@ static __cpuidle int sbi_cpuidle_enter_state(struct cpuidle_device *dev,
u32 state = states[idx];
if (state & SBI_HSM_SUSP_NON_RET_BIT)
- return CPU_PM_CPU_IDLE_ENTER_PARAM(sbi_suspend, idx, state);
+ return CPU_PM_CPU_IDLE_ENTER_PARAM(riscv_sbi_hart_suspend, idx, state);
else
- return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(sbi_suspend,
+ return CPU_PM_CPU_IDLE_ENTER_RETENTION_PARAM(riscv_sbi_hart_suspend,
idx, state);
}
@@ -133,7 +113,7 @@ static __cpuidle int __sbi_enter_domain_idle_state(struct cpuidle_device *dev,
else
state = states[idx];
- ret = sbi_suspend(state) ? -1 : idx;
+ ret = riscv_sbi_hart_suspend(state) ? -1 : idx;
ct_cpuidle_exit();
@@ -206,17 +186,6 @@ static const struct of_device_id sbi_cpuidle_state_match[] = {
{ },
};
-static bool sbi_suspend_state_is_valid(u32 state)
-{
- if (state > SBI_HSM_SUSPEND_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_RET_PLATFORM)
- return false;
- if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
- state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
- return false;
- return true;
-}
-
static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
{
int err = of_property_read_u32(np, "riscv,sbi-suspend-param", state);
@@ -226,7 +195,7 @@ static int sbi_dt_parse_state_node(struct device_node *np, u32 *state)
return err;
}
- if (!sbi_suspend_state_is_valid(*state)) {
+ if (!riscv_sbi_suspend_state_is_valid(*state)) {
pr_warn("Invalid SBI suspend state %#x\n", *state);
return -EINVAL;
}
@@ -607,16 +576,8 @@ static int __init sbi_cpuidle_init(void)
int ret;
struct platform_device *pdev;
- /*
- * The SBI HSM suspend function is only available when:
- * 1) SBI version is 0.3 or higher
- * 2) SBI HSM extension is available
- */
- if ((sbi_spec_version < sbi_mk_version(0, 3)) ||
- !sbi_probe_extension(SBI_EXT_HSM)) {
- pr_info("HSM suspend not available\n");
+ if (!riscv_sbi_hsm_is_supported())
return 0;
- }
ret = platform_driver_register(&sbi_cpuidle_driver);
if (ret)
--
2.34.1
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-01-18 6:29 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-18 6:29 [PATCH v3 -next 0/3] RISC-V: ACPI: Add LPI support Sunil V L
2024-01-18 6:29 ` Sunil V L
2024-01-18 6:29 ` Sunil V L [this message]
2024-01-18 6:29 ` [PATCH v3 -next 1/3] cpuidle: RISC-V: Move few functions to arch/riscv Sunil V L
2024-01-18 6:29 ` [PATCH v3 -next 2/3] ACPI: RISC-V: Add LPI driver Sunil V L
2024-01-18 6:29 ` Sunil V L
2024-03-18 5:33 ` Drew Fustini
2024-03-18 5:33 ` Drew Fustini
2024-03-18 8:42 ` Sunil V L
2024-03-18 8:42 ` Sunil V L
2024-01-18 6:29 ` [PATCH v3 -next 3/3] ACPI: Enable ACPI_PROCESSOR for RISC-V Sunil V L
2024-01-18 6:29 ` Sunil V L
2024-02-15 4:37 ` [PATCH v3 -next 0/3] RISC-V: ACPI: Add LPI support Sunil V L
2024-02-15 4:37 ` Sunil V L
2024-03-15 12:31 ` Rafael J. Wysocki
2024-03-15 12:31 ` Rafael J. Wysocki
2024-03-15 2:59 ` Drew Fustini
2024-03-15 2:59 ` Drew Fustini
2024-03-15 5:53 ` Sunil V L
2024-03-15 5:53 ` Sunil V L
2024-03-20 20:50 ` patchwork-bot+linux-riscv
2024-03-20 20:50 ` patchwork-bot+linux-riscv
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240118062930.245937-2-sunilvl@ventanamicro.com \
--to=sunilvl@ventanamicro.com \
--cc=ajones@ventanamicro.com \
--cc=anup@brainfault.org \
--cc=aou@eecs.berkeley.edu \
--cc=atishp@rivosinc.com \
--cc=conor.dooley@microchip.com \
--cc=daniel.lezcano@linaro.org \
--cc=lenb@kernel.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=pavel@ucw.cz \
--cc=rafael@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.