From: Conor Dooley <conor@kernel.org>
To: linux-riscv@lists.infradead.org
Cc: conor@kernel.org, Conor Dooley <conor.dooley@microchip.com>,
Daire McNamara <daire.mcnamara@microchip.com>,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH v2 3/7] clk: microchip: mpfs: split MSSPLL in two
Date: Mon, 22 Jan 2024 12:19:51 +0000 [thread overview]
Message-ID: <20240122-truth-scope-7b96ba10d491@spud> (raw)
In-Reply-To: <20240122-catty-roast-d3625dbb02fe@spud>
From: Conor Dooley <conor.dooley@microchip.com>
The MSSPLL is really two stages - there's the PLL itself and 4 outputs,
each with their own divider. The current driver models this as a single
entity, outputting a single clock, used for both the CPU and AHB/AXI
buses. The other 3 outputs are used for the eMMC, "user crypto" and CAN
controller. Split the MSSPLL in two, as a precursor to adding support
for the other 3 outputs, with the PLL itself as one "hw" clock and the
output divider stage as another.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/clk/microchip/clk-mpfs.c | 188 ++++++++++++++++++++-----------
1 file changed, 123 insertions(+), 65 deletions(-)
diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c
index c8ffa755b58d..acf598a32ce0 100644
--- a/drivers/clk/microchip/clk-mpfs.c
+++ b/drivers/clk/microchip/clk-mpfs.c
@@ -30,6 +30,13 @@
#define MSSPLL_POSTDIV_WIDTH 0x07u
#define MSSPLL_FIXED_DIV 4u
+/*
+ * This clock ID is defined here, rather than the binding headers, as it is an
+ * internal clock only, and therefore has no consumers in other peripheral
+ * blocks.
+ */
+#define CLK_MSSPLL_INTERNAL 38u
+
struct mpfs_clock_data {
struct device *dev;
void __iomem *base;
@@ -39,17 +46,27 @@ struct mpfs_clock_data {
struct mpfs_msspll_hw_clock {
void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
unsigned int id;
u32 reg_offset;
u32 shift;
u32 width;
u32 flags;
- struct clk_hw hw;
- struct clk_init_data init;
};
#define to_mpfs_msspll_clk(_hw) container_of(_hw, struct mpfs_msspll_hw_clock, hw)
+struct mpfs_msspll_out_hw_clock {
+ void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
+ unsigned int id;
+ u32 flags;
+};
+
+#define to_mpfs_msspll_out_clk(_hw) container_of(_hw, struct mpfs_msspll_out_hw_clock, hw)
+
struct mpfs_cfg_hw_clock {
struct clk_divider cfg;
struct clk_init_data init;
@@ -93,93 +110,40 @@ static const struct clk_div_table mpfs_div_rtcref_table[] = {
{ 0, 0 }
};
+/*
+ * MSS PLL internal clock
+ */
+
static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned long prate)
-{
- struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
- void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
- void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
- void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR;
- u32 mult, ref_div, postdiv;
-
- mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
- mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
- ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
- ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
- postdiv = readl_relaxed(postdiv_addr) >> MSSPLL_POSTDIV_SHIFT;
- postdiv &= clk_div_mask(MSSPLL_POSTDIV_WIDTH);
-
- return prate * mult / (ref_div * MSSPLL_FIXED_DIV * postdiv);
-}
-
-static long mpfs_clk_msspll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate)
{
struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
u32 mult, ref_div;
- unsigned long rate_before_ctrl;
mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
- rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
-
- return divider_round_rate(hw, rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
- msspll_hw->flags);
-}
-
-static int mpfs_clk_msspll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
-{
- struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
- void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
- void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
- void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR;
- u32 mult, ref_div, postdiv;
- int divider_setting;
- unsigned long rate_before_ctrl, flags;
-
- mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
- mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
- ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
- ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
-
- rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
- divider_setting = divider_get_val(rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
- msspll_hw->flags);
-
- if (divider_setting < 0)
- return divider_setting;
-
- spin_lock_irqsave(&mpfs_clk_lock, flags);
-
- postdiv = readl_relaxed(postdiv_addr);
- postdiv &= ~(clk_div_mask(MSSPLL_POSTDIV_WIDTH) << MSSPLL_POSTDIV_SHIFT);
- writel_relaxed(postdiv, postdiv_addr);
-
- spin_unlock_irqrestore(&mpfs_clk_lock, flags);
-
- return 0;
+ return prate * mult / (ref_div * MSSPLL_FIXED_DIV);
}
static const struct clk_ops mpfs_clk_msspll_ops = {
.recalc_rate = mpfs_clk_msspll_recalc_rate,
- .round_rate = mpfs_clk_msspll_round_rate,
- .set_rate = mpfs_clk_msspll_set_rate,
};
#define CLK_PLL(_id, _name, _parent, _shift, _width, _flags, _offset) { \
.id = _id, \
+ .flags = _flags, \
.shift = _shift, \
.width = _width, \
.reg_offset = _offset, \
- .flags = _flags, \
.hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, &mpfs_clk_msspll_ops, 0), \
}
static struct mpfs_msspll_hw_clock mpfs_msspll_clks[] = {
- CLK_PLL(CLK_MSSPLL, "clk_msspll", mpfs_ext_ref, MSSPLL_FBDIV_SHIFT,
+ CLK_PLL(CLK_MSSPLL_INTERNAL, "clk_msspll_internal", mpfs_ext_ref, MSSPLL_FBDIV_SHIFT,
MSSPLL_FBDIV_WIDTH, 0, REG_MSSPLL_SSCG_2_CR),
};
@@ -196,7 +160,7 @@ static int mpfs_clk_register_mssplls(struct device *dev, struct mpfs_msspll_hw_c
ret = devm_clk_hw_register(dev, &msspll_hw->hw);
if (ret)
return dev_err_probe(dev, ret, "failed to register msspll id: %d\n",
- CLK_MSSPLL);
+ CLK_MSSPLL_INTERNAL);
data->hw_data.hws[msspll_hw->id] = &msspll_hw->hw;
}
@@ -204,6 +168,94 @@ static int mpfs_clk_register_mssplls(struct device *dev, struct mpfs_msspll_hw_c
return 0;
}
+/*
+ * MSS PLL output clocks
+ */
+
+static unsigned long mpfs_clk_msspll_out_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+ void __iomem *postdiv_addr = msspll_out_hw->base + REG_MSSPLL_POSTDIV_CR;
+ u32 postdiv;
+
+ postdiv = readl_relaxed(postdiv_addr) >> MSSPLL_POSTDIV_SHIFT;
+ postdiv &= clk_div_mask(MSSPLL_POSTDIV_WIDTH);
+
+ return prate / postdiv;
+}
+
+static long mpfs_clk_msspll_out_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+
+ return divider_round_rate(hw, rate, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+ msspll_out_hw->flags);
+}
+
+static int mpfs_clk_msspll_out_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+ void __iomem *postdiv_addr = msspll_out_hw->base + REG_MSSPLL_POSTDIV_CR;
+ u32 postdiv;
+ int divider_setting;
+ unsigned long flags;
+
+ divider_setting = divider_get_val(rate, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+ msspll_out_hw->flags);
+
+ if (divider_setting < 0)
+ return divider_setting;
+
+ spin_lock_irqsave(&mpfs_clk_lock, flags);
+
+ postdiv = readl_relaxed(postdiv_addr);
+ postdiv &= ~(clk_div_mask(MSSPLL_POSTDIV_WIDTH) << MSSPLL_POSTDIV_SHIFT);
+ writel_relaxed(postdiv, postdiv_addr);
+
+ spin_unlock_irqrestore(&mpfs_clk_lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops mpfs_clk_msspll_out_ops = {
+ .recalc_rate = mpfs_clk_msspll_out_recalc_rate,
+ .round_rate = mpfs_clk_msspll_out_round_rate,
+ .set_rate = mpfs_clk_msspll_out_set_rate,
+};
+
+#define CLK_PLL_OUT(_id, _name, _parent, _flags) { \
+ .id = _id, \
+ .flags = _flags, \
+ .hw.init = CLK_HW_INIT(_name, _parent, &mpfs_clk_msspll_out_ops, 0), \
+}
+
+static struct mpfs_msspll_out_hw_clock mpfs_msspll_out_clks[] = {
+ CLK_PLL_OUT(CLK_MSSPLL0, "clk_msspll", "clk_msspll_internal", 0),
+};
+
+static int mpfs_clk_register_msspll_outs(struct device *dev,
+ struct mpfs_msspll_out_hw_clock *msspll_out_hws,
+ unsigned int num_clks, struct mpfs_clock_data *data)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < num_clks; i++) {
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = &msspll_out_hws[i];
+
+ msspll_out_hw->base = data->msspll_base;
+ ret = devm_clk_hw_register(dev, &msspll_out_hw->hw);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to register msspll out id: %d\n",
+ msspll_out_hw->id);
+
+ data->hw_data.hws[msspll_out_hw->id] = &msspll_out_hw->hw;
+ }
+
+ return 0;
+}
+
/*
* "CFG" clocks
*/
@@ -442,8 +494,8 @@ static int mpfs_clk_probe(struct platform_device *pdev)
int ret;
/* CLK_RESERVED is not part of clock arrays, so add 1 */
- num_clks = ARRAY_SIZE(mpfs_msspll_clks) + ARRAY_SIZE(mpfs_cfg_clks)
- + ARRAY_SIZE(mpfs_periph_clks) + 1;
+ num_clks = ARRAY_SIZE(mpfs_msspll_clks) + ARRAY_SIZE(mpfs_msspll_out_clks)
+ + ARRAY_SIZE(mpfs_cfg_clks) + ARRAY_SIZE(mpfs_periph_clks) + 1;
clk_data = devm_kzalloc(dev, struct_size(clk_data, hw_data.hws, num_clks), GFP_KERNEL);
if (!clk_data)
@@ -466,6 +518,12 @@ static int mpfs_clk_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = mpfs_clk_register_msspll_outs(dev, mpfs_msspll_out_clks,
+ ARRAY_SIZE(mpfs_msspll_out_clks),
+ clk_data);
+ if (ret)
+ return ret;
+
ret = mpfs_clk_register_cfgs(dev, mpfs_cfg_clks, ARRAY_SIZE(mpfs_cfg_clks), clk_data);
if (ret)
return ret;
--
2.43.0
WARNING: multiple messages have this Message-ID (diff)
From: Conor Dooley <conor@kernel.org>
To: linux-riscv@lists.infradead.org
Cc: conor@kernel.org, Conor Dooley <conor.dooley@microchip.com>,
Daire McNamara <daire.mcnamara@microchip.com>,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
Eric Dumazet <edumazet@google.com>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-clk@vger.kernel.org
Subject: [PATCH v2 3/7] clk: microchip: mpfs: split MSSPLL in two
Date: Mon, 22 Jan 2024 12:19:51 +0000 [thread overview]
Message-ID: <20240122-truth-scope-7b96ba10d491@spud> (raw)
In-Reply-To: <20240122-catty-roast-d3625dbb02fe@spud>
From: Conor Dooley <conor.dooley@microchip.com>
The MSSPLL is really two stages - there's the PLL itself and 4 outputs,
each with their own divider. The current driver models this as a single
entity, outputting a single clock, used for both the CPU and AHB/AXI
buses. The other 3 outputs are used for the eMMC, "user crypto" and CAN
controller. Split the MSSPLL in two, as a precursor to adding support
for the other 3 outputs, with the PLL itself as one "hw" clock and the
output divider stage as another.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
drivers/clk/microchip/clk-mpfs.c | 188 ++++++++++++++++++++-----------
1 file changed, 123 insertions(+), 65 deletions(-)
diff --git a/drivers/clk/microchip/clk-mpfs.c b/drivers/clk/microchip/clk-mpfs.c
index c8ffa755b58d..acf598a32ce0 100644
--- a/drivers/clk/microchip/clk-mpfs.c
+++ b/drivers/clk/microchip/clk-mpfs.c
@@ -30,6 +30,13 @@
#define MSSPLL_POSTDIV_WIDTH 0x07u
#define MSSPLL_FIXED_DIV 4u
+/*
+ * This clock ID is defined here, rather than the binding headers, as it is an
+ * internal clock only, and therefore has no consumers in other peripheral
+ * blocks.
+ */
+#define CLK_MSSPLL_INTERNAL 38u
+
struct mpfs_clock_data {
struct device *dev;
void __iomem *base;
@@ -39,17 +46,27 @@ struct mpfs_clock_data {
struct mpfs_msspll_hw_clock {
void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
unsigned int id;
u32 reg_offset;
u32 shift;
u32 width;
u32 flags;
- struct clk_hw hw;
- struct clk_init_data init;
};
#define to_mpfs_msspll_clk(_hw) container_of(_hw, struct mpfs_msspll_hw_clock, hw)
+struct mpfs_msspll_out_hw_clock {
+ void __iomem *base;
+ struct clk_hw hw;
+ struct clk_init_data init;
+ unsigned int id;
+ u32 flags;
+};
+
+#define to_mpfs_msspll_out_clk(_hw) container_of(_hw, struct mpfs_msspll_out_hw_clock, hw)
+
struct mpfs_cfg_hw_clock {
struct clk_divider cfg;
struct clk_init_data init;
@@ -93,93 +110,40 @@ static const struct clk_div_table mpfs_div_rtcref_table[] = {
{ 0, 0 }
};
+/*
+ * MSS PLL internal clock
+ */
+
static unsigned long mpfs_clk_msspll_recalc_rate(struct clk_hw *hw, unsigned long prate)
-{
- struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
- void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
- void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
- void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR;
- u32 mult, ref_div, postdiv;
-
- mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
- mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
- ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
- ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
- postdiv = readl_relaxed(postdiv_addr) >> MSSPLL_POSTDIV_SHIFT;
- postdiv &= clk_div_mask(MSSPLL_POSTDIV_WIDTH);
-
- return prate * mult / (ref_div * MSSPLL_FIXED_DIV * postdiv);
-}
-
-static long mpfs_clk_msspll_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate)
{
struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
u32 mult, ref_div;
- unsigned long rate_before_ctrl;
mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
- rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
-
- return divider_round_rate(hw, rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
- msspll_hw->flags);
-}
-
-static int mpfs_clk_msspll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
-{
- struct mpfs_msspll_hw_clock *msspll_hw = to_mpfs_msspll_clk(hw);
- void __iomem *mult_addr = msspll_hw->base + msspll_hw->reg_offset;
- void __iomem *ref_div_addr = msspll_hw->base + REG_MSSPLL_REF_CR;
- void __iomem *postdiv_addr = msspll_hw->base + REG_MSSPLL_POSTDIV_CR;
- u32 mult, ref_div, postdiv;
- int divider_setting;
- unsigned long rate_before_ctrl, flags;
-
- mult = readl_relaxed(mult_addr) >> MSSPLL_FBDIV_SHIFT;
- mult &= clk_div_mask(MSSPLL_FBDIV_WIDTH);
- ref_div = readl_relaxed(ref_div_addr) >> MSSPLL_REFDIV_SHIFT;
- ref_div &= clk_div_mask(MSSPLL_REFDIV_WIDTH);
-
- rate_before_ctrl = rate * (ref_div * MSSPLL_FIXED_DIV) / mult;
- divider_setting = divider_get_val(rate_before_ctrl, prate, NULL, MSSPLL_POSTDIV_WIDTH,
- msspll_hw->flags);
-
- if (divider_setting < 0)
- return divider_setting;
-
- spin_lock_irqsave(&mpfs_clk_lock, flags);
-
- postdiv = readl_relaxed(postdiv_addr);
- postdiv &= ~(clk_div_mask(MSSPLL_POSTDIV_WIDTH) << MSSPLL_POSTDIV_SHIFT);
- writel_relaxed(postdiv, postdiv_addr);
-
- spin_unlock_irqrestore(&mpfs_clk_lock, flags);
-
- return 0;
+ return prate * mult / (ref_div * MSSPLL_FIXED_DIV);
}
static const struct clk_ops mpfs_clk_msspll_ops = {
.recalc_rate = mpfs_clk_msspll_recalc_rate,
- .round_rate = mpfs_clk_msspll_round_rate,
- .set_rate = mpfs_clk_msspll_set_rate,
};
#define CLK_PLL(_id, _name, _parent, _shift, _width, _flags, _offset) { \
.id = _id, \
+ .flags = _flags, \
.shift = _shift, \
.width = _width, \
.reg_offset = _offset, \
- .flags = _flags, \
.hw.init = CLK_HW_INIT_PARENTS_DATA(_name, _parent, &mpfs_clk_msspll_ops, 0), \
}
static struct mpfs_msspll_hw_clock mpfs_msspll_clks[] = {
- CLK_PLL(CLK_MSSPLL, "clk_msspll", mpfs_ext_ref, MSSPLL_FBDIV_SHIFT,
+ CLK_PLL(CLK_MSSPLL_INTERNAL, "clk_msspll_internal", mpfs_ext_ref, MSSPLL_FBDIV_SHIFT,
MSSPLL_FBDIV_WIDTH, 0, REG_MSSPLL_SSCG_2_CR),
};
@@ -196,7 +160,7 @@ static int mpfs_clk_register_mssplls(struct device *dev, struct mpfs_msspll_hw_c
ret = devm_clk_hw_register(dev, &msspll_hw->hw);
if (ret)
return dev_err_probe(dev, ret, "failed to register msspll id: %d\n",
- CLK_MSSPLL);
+ CLK_MSSPLL_INTERNAL);
data->hw_data.hws[msspll_hw->id] = &msspll_hw->hw;
}
@@ -204,6 +168,94 @@ static int mpfs_clk_register_mssplls(struct device *dev, struct mpfs_msspll_hw_c
return 0;
}
+/*
+ * MSS PLL output clocks
+ */
+
+static unsigned long mpfs_clk_msspll_out_recalc_rate(struct clk_hw *hw, unsigned long prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+ void __iomem *postdiv_addr = msspll_out_hw->base + REG_MSSPLL_POSTDIV_CR;
+ u32 postdiv;
+
+ postdiv = readl_relaxed(postdiv_addr) >> MSSPLL_POSTDIV_SHIFT;
+ postdiv &= clk_div_mask(MSSPLL_POSTDIV_WIDTH);
+
+ return prate / postdiv;
+}
+
+static long mpfs_clk_msspll_out_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+
+ return divider_round_rate(hw, rate, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+ msspll_out_hw->flags);
+}
+
+static int mpfs_clk_msspll_out_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long prate)
+{
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = to_mpfs_msspll_out_clk(hw);
+ void __iomem *postdiv_addr = msspll_out_hw->base + REG_MSSPLL_POSTDIV_CR;
+ u32 postdiv;
+ int divider_setting;
+ unsigned long flags;
+
+ divider_setting = divider_get_val(rate, prate, NULL, MSSPLL_POSTDIV_WIDTH,
+ msspll_out_hw->flags);
+
+ if (divider_setting < 0)
+ return divider_setting;
+
+ spin_lock_irqsave(&mpfs_clk_lock, flags);
+
+ postdiv = readl_relaxed(postdiv_addr);
+ postdiv &= ~(clk_div_mask(MSSPLL_POSTDIV_WIDTH) << MSSPLL_POSTDIV_SHIFT);
+ writel_relaxed(postdiv, postdiv_addr);
+
+ spin_unlock_irqrestore(&mpfs_clk_lock, flags);
+
+ return 0;
+}
+
+static const struct clk_ops mpfs_clk_msspll_out_ops = {
+ .recalc_rate = mpfs_clk_msspll_out_recalc_rate,
+ .round_rate = mpfs_clk_msspll_out_round_rate,
+ .set_rate = mpfs_clk_msspll_out_set_rate,
+};
+
+#define CLK_PLL_OUT(_id, _name, _parent, _flags) { \
+ .id = _id, \
+ .flags = _flags, \
+ .hw.init = CLK_HW_INIT(_name, _parent, &mpfs_clk_msspll_out_ops, 0), \
+}
+
+static struct mpfs_msspll_out_hw_clock mpfs_msspll_out_clks[] = {
+ CLK_PLL_OUT(CLK_MSSPLL0, "clk_msspll", "clk_msspll_internal", 0),
+};
+
+static int mpfs_clk_register_msspll_outs(struct device *dev,
+ struct mpfs_msspll_out_hw_clock *msspll_out_hws,
+ unsigned int num_clks, struct mpfs_clock_data *data)
+{
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < num_clks; i++) {
+ struct mpfs_msspll_out_hw_clock *msspll_out_hw = &msspll_out_hws[i];
+
+ msspll_out_hw->base = data->msspll_base;
+ ret = devm_clk_hw_register(dev, &msspll_out_hw->hw);
+ if (ret)
+ return dev_err_probe(dev, ret, "failed to register msspll out id: %d\n",
+ msspll_out_hw->id);
+
+ data->hw_data.hws[msspll_out_hw->id] = &msspll_out_hw->hw;
+ }
+
+ return 0;
+}
+
/*
* "CFG" clocks
*/
@@ -442,8 +494,8 @@ static int mpfs_clk_probe(struct platform_device *pdev)
int ret;
/* CLK_RESERVED is not part of clock arrays, so add 1 */
- num_clks = ARRAY_SIZE(mpfs_msspll_clks) + ARRAY_SIZE(mpfs_cfg_clks)
- + ARRAY_SIZE(mpfs_periph_clks) + 1;
+ num_clks = ARRAY_SIZE(mpfs_msspll_clks) + ARRAY_SIZE(mpfs_msspll_out_clks)
+ + ARRAY_SIZE(mpfs_cfg_clks) + ARRAY_SIZE(mpfs_periph_clks) + 1;
clk_data = devm_kzalloc(dev, struct_size(clk_data, hw_data.hws, num_clks), GFP_KERNEL);
if (!clk_data)
@@ -466,6 +518,12 @@ static int mpfs_clk_probe(struct platform_device *pdev)
if (ret)
return ret;
+ ret = mpfs_clk_register_msspll_outs(dev, mpfs_msspll_out_clks,
+ ARRAY_SIZE(mpfs_msspll_out_clks),
+ clk_data);
+ if (ret)
+ return ret;
+
ret = mpfs_clk_register_cfgs(dev, mpfs_cfg_clks, ARRAY_SIZE(mpfs_cfg_clks), clk_data);
if (ret)
return ret;
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
next prev parent reply other threads:[~2024-01-22 12:20 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-22 12:19 [PATCH v2 0/7] MPFS clock fixes required for correct CAN clock modeling Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 12:19 ` [PATCH v2 1/7] dt-bindings: clock: mpfs: add more MSSPLL output definitions Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 12:19 ` [PATCH v2 2/7] dt-bindings: can: mpfs: add missing required clock Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 13:13 ` Marc Kleine-Budde
2024-01-22 13:13 ` Marc Kleine-Budde
2024-01-22 14:21 ` Conor Dooley
2024-01-22 14:21 ` Conor Dooley
2024-01-22 14:46 ` Marc Kleine-Budde
2024-01-22 14:46 ` Marc Kleine-Budde
2024-01-22 14:56 ` Conor Dooley
2024-01-22 14:56 ` Conor Dooley
2024-01-22 15:31 ` Marc Kleine-Budde
2024-01-22 15:31 ` Marc Kleine-Budde
2024-01-22 15:47 ` Conor Dooley
2024-01-22 15:47 ` Conor Dooley
2024-01-30 12:11 ` Conor Dooley
2024-01-30 12:11 ` Conor Dooley
2024-01-30 13:01 ` Marc Kleine-Budde
2024-01-30 13:01 ` Marc Kleine-Budde
2024-02-06 14:19 ` Conor Dooley
2024-02-06 14:19 ` Conor Dooley
2024-01-23 11:27 ` Krzysztof Kozlowski
2024-01-23 11:27 ` Krzysztof Kozlowski
2024-01-22 12:19 ` Conor Dooley [this message]
2024-01-22 12:19 ` [PATCH v2 3/7] clk: microchip: mpfs: split MSSPLL in two Conor Dooley
2024-01-22 12:19 ` [PATCH v2 4/7] clk: microchip: mpfs: setup for using other mss pll outputs Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 12:19 ` [PATCH v2 5/7] clk: microchip: mpfs: add missing MSSPLL outputs Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 12:19 ` [PATCH v2 6/7] clk: microchip: mpfs: convert MSSPLL outputs to clk_divider Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-01-22 12:19 ` [PATCH v2 7/7] riscv: dts: microchip: add missing CAN bus clocks Conor Dooley
2024-01-22 12:19 ` Conor Dooley
2024-02-06 14:27 ` (subset) [PATCH v2 0/7] MPFS clock fixes required for correct CAN clock modeling Conor Dooley
2024-02-06 14:27 ` Conor Dooley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240122-truth-scope-7b96ba10d491@spud \
--to=conor@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor.dooley@microchip.com \
--cc=daire.mcnamara@microchip.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=edumazet@google.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kuba@kernel.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=mkl@pengutronix.de \
--cc=mturquette@baylibre.com \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.