All of lore.kernel.org
 help / color / mirror / Atom feed
From: Christian Marangi <ansuelsmth@gmail.com>
To: "Pavel Machek" <pavel@ucw.cz>, "Lee Jones" <lee@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"William Zhang" <william.zhang@broadcom.com>,
	"Anand Gore" <anand.gore@broadcom.com>,
	"Kursad Oney" <kursad.oney@broadcom.com>,
	"Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"Broadcom internal kernel review list"
	<bcm-kernel-feedback-list@broadcom.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>, "Andrew Lunn" <andrew@lunn.ch>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Jacek Anaszewski" <jacek.anaszewski@gmail.com>,
	"Fernández Rojas" <noltari@gmail.com>,
	"Sven Schwermer" <sven.schwermer@disruptive-technologies.com>,
	"Christian Marangi" <ansuelsmth@gmail.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Subject: [net-next PATCH v10 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
Date: Thu, 25 Jan 2024 21:36:58 +0100	[thread overview]
Message-ID: <20240125203702.4552-3-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20240125203702.4552-1-ansuelsmth@gmail.com>

Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes v10:
- Add Review and Ack tags
Changes v5:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 5633e0aa6bdf..8a3c2398b10c 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -206,6 +206,12 @@ properties:
       Makes LED active low. To turn the LED ON, line needs to be
       set to low voltage instead of high.
 
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
-- 
2.43.0


WARNING: multiple messages have this Message-ID (diff)
From: Christian Marangi <ansuelsmth@gmail.com>
To: "Pavel Machek" <pavel@ucw.cz>, "Lee Jones" <lee@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
	"Conor Dooley" <conor+dt@kernel.org>,
	"William Zhang" <william.zhang@broadcom.com>,
	"Anand Gore" <anand.gore@broadcom.com>,
	"Kursad Oney" <kursad.oney@broadcom.com>,
	"Florian Fainelli" <florian.fainelli@broadcom.com>,
	"Rafał Miłecki" <rafal@milecki.pl>,
	"Broadcom internal kernel review list"
	<bcm-kernel-feedback-list@broadcom.com>,
	"David S. Miller" <davem@davemloft.net>,
	"Eric Dumazet" <edumazet@google.com>,
	"Jakub Kicinski" <kuba@kernel.org>,
	"Paolo Abeni" <pabeni@redhat.com>, "Andrew Lunn" <andrew@lunn.ch>,
	"Heiner Kallweit" <hkallweit1@gmail.com>,
	"Russell King" <linux@armlinux.org.uk>,
	"Jacek Anaszewski" <jacek.anaszewski@gmail.com>,
	"Fernández Rojas" <noltari@gmail.com>,
	"Sven Schwermer" <sven.schwermer@disruptive-technologies.com>,
	"Christian Marangi" <ansuelsmth@gmail.com>,
	linux-leds@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, netdev@vger.kernel.org
Cc: Rob Herring <robh@kernel.org>
Subject: [net-next PATCH v10 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
Date: Thu, 25 Jan 2024 21:36:58 +0100	[thread overview]
Message-ID: <20240125203702.4552-3-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20240125203702.4552-1-ansuelsmth@gmail.com>

Document LED inactive high impedance mode to set the LED to require high
impedance configuration to be turned OFF.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes v10:
- Add Review and Ack tags
Changes v5:
- Add this patch

 Documentation/devicetree/bindings/leds/common.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
index 5633e0aa6bdf..8a3c2398b10c 100644
--- a/Documentation/devicetree/bindings/leds/common.yaml
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -206,6 +206,12 @@ properties:
       Makes LED active low. To turn the LED ON, line needs to be
       set to low voltage instead of high.
 
+  inactive-high-impedance:
+    type: boolean
+    description:
+      Set LED to high-impedance mode to turn the LED OFF. LED might also
+      describe this mode as tristate.
+
   # Required properties for flash LED child nodes:
   flash-max-microamp:
     description:
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  parent reply	other threads:[~2024-01-25 20:37 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-01-25 20:36 [net-next PATCH v10 0/5] net: phy: generic polarity + LED support for qca808x Christian Marangi
2024-01-25 20:36 ` Christian Marangi
2024-01-25 20:36 ` [net-next PATCH v10 1/5] dt-bindings: net: phy: Make LED active-low property common Christian Marangi
2024-01-25 20:36   ` Christian Marangi
2024-01-25 20:36 ` Christian Marangi [this message]
2024-01-25 20:36   ` [net-next PATCH v10 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode Christian Marangi
2024-01-25 20:36 ` [net-next PATCH v10 3/5] net: phy: add support for PHY LEDs polarity modes Christian Marangi
2024-01-25 20:36   ` Christian Marangi
2024-05-10 23:14   ` Daniel Golle
2024-05-10 23:14     ` Daniel Golle
2024-05-10 23:58     ` Andrew Lunn
2024-05-10 23:58       ` Andrew Lunn
2024-05-11  9:35       ` Russell King (Oracle)
2024-05-11  9:35         ` Russell King (Oracle)
2024-01-25 20:37 ` [net-next PATCH v10 4/5] dt-bindings: net: Document QCA808x PHYs Christian Marangi
2024-01-25 20:37   ` Christian Marangi
2024-01-25 20:37 ` [net-next PATCH v10 5/5] net: phy: at803x: add LED support for qca808x Christian Marangi
2024-01-25 20:37   ` Christian Marangi
2024-01-27  5:10 ` [net-next PATCH v10 0/5] net: phy: generic polarity + " patchwork-bot+netdevbpf
2024-01-27  5:10   ` patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240125203702.4552-3-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=anand.gore@broadcom.com \
    --cc=andrew@lunn.ch \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=conor+dt@kernel.org \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=florian.fainelli@broadcom.com \
    --cc=hkallweit1@gmail.com \
    --cc=jacek.anaszewski@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=kursad.oney@broadcom.com \
    --cc=lee@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=netdev@vger.kernel.org \
    --cc=noltari@gmail.com \
    --cc=pabeni@redhat.com \
    --cc=pavel@ucw.cz \
    --cc=rafal@milecki.pl \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    --cc=sven.schwermer@disruptive-technologies.com \
    --cc=william.zhang@broadcom.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.