From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Emil Renner Berthing <kernel@esmil.dk>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/6] riscv: dts: starfive: add Milkv Mars board device tree
Date: Wed, 31 Jan 2024 21:25:54 +0800 [thread overview]
Message-ID: <20240131132600.4067-1-jszhang@kernel.org> (raw)
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:
- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI
patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 ~ patch4 adopt Krzysztof's suggestions to DT node names
patch5 introduces a board common dtsi for visionfive2 and mars
patch3 adds the mars board dts file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
Since v2:
- add a common board file which can be used by vf2 and mars
Since v1:
- add two new patches which add "cpus" label and board dt-binding
- adopt Krzysztof's suggestions, thanks
Jisheng Zhang (6):
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: visionfive 2: update sound and codec dt node
name
riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
riscv: dts: starfive: introduce a common board dtsi for jh7110 based
boards
riscv: dts: starfive: add Milkv Mars board device tree
.../devicetree/bindings/riscv/starfive.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
.../boot/dts/starfive/jh7110-milkv-mars.dts | 35 +
.../jh7110-starfive-visionfive-2.dtsi | 600 +----------------
.../jh7110-visionfive2-mars-common.dtsi | 617 ++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +-
7 files changed, 657 insertions(+), 601 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi
--
2.43.0
_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv
WARNING: multiple messages have this Message-ID (diff)
From: Jisheng Zhang <jszhang@kernel.org>
To: Conor Dooley <conor@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Paul Walmsley <paul.walmsley@sifive.com>,
Palmer Dabbelt <palmer@dabbelt.com>,
Albert Ou <aou@eecs.berkeley.edu>,
Emil Renner Berthing <kernel@esmil.dk>
Cc: linux-riscv@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v3 0/6] riscv: dts: starfive: add Milkv Mars board device tree
Date: Wed, 31 Jan 2024 21:25:54 +0800 [thread overview]
Message-ID: <20240131132600.4067-1-jszhang@kernel.org> (raw)
The Milkv Mars is a development board based on the Starfive JH7110 SoC.
The board features:
- JH7110 SoC
- 1/2/4/8 GiB LPDDR4 DRAM
- AXP15060 PMIC
- 40 pin GPIO header
- 3x USB 3.0 host port
- 1x USB 2.0 host port
- 1x M.2 E-Key
- 1x eMMC slot
- 1x MicroSD slot
- 1x QSPI Flash
- 1x 1Gbps Ethernet port
- 1x HDMI port
- 1x 2-lane DSI and 1x 4-lane DSI
- 1x 2-lane CSI
patch1 adds 'cpus' label
patch2 adds "milkv,mars" board dt-binding
patch3 ~ patch4 adopt Krzysztof's suggestions to DT node names
patch5 introduces a board common dtsi for visionfive2 and mars
patch3 adds the mars board dts file describing the currently supported
features:
Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.
Since v2:
- add a common board file which can be used by vf2 and mars
Since v1:
- add two new patches which add "cpus" label and board dt-binding
- adopt Krzysztof's suggestions, thanks
Jisheng Zhang (6):
riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi
dt-bindings: riscv: starfive: add Milkv Mars board
riscv: dts: starfive: visionfive 2: update sound and codec dt node
name
riscv: dts: starfive: visionfive 2: use cpus label for timebase freq
riscv: dts: starfive: introduce a common board dtsi for jh7110 based
boards
riscv: dts: starfive: add Milkv Mars board device tree
.../devicetree/bindings/riscv/starfive.yaml | 1 +
arch/riscv/boot/dts/starfive/Makefile | 1 +
arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +-
.../boot/dts/starfive/jh7110-milkv-mars.dts | 35 +
.../jh7110-starfive-visionfive-2.dtsi | 600 +----------------
.../jh7110-visionfive2-mars-common.dtsi | 617 ++++++++++++++++++
arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +-
7 files changed, 657 insertions(+), 601 deletions(-)
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts
create mode 100644 arch/riscv/boot/dts/starfive/jh7110-visionfive2-mars-common.dtsi
--
2.43.0
next reply other threads:[~2024-01-31 13:38 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-01-31 13:25 Jisheng Zhang [this message]
2024-01-31 13:25 ` [PATCH v3 0/6] riscv: dts: starfive: add Milkv Mars board device tree Jisheng Zhang
2024-01-31 13:25 ` [PATCH v3 1/6] riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi Jisheng Zhang
2024-01-31 13:25 ` Jisheng Zhang
2024-04-19 22:04 ` Emil Renner Berthing
2024-04-19 22:04 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 2/6] dt-bindings: riscv: starfive: add Milkv Mars board Jisheng Zhang
2024-01-31 13:25 ` Jisheng Zhang
2024-04-19 22:04 ` Emil Renner Berthing
2024-04-19 22:04 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 3/6] riscv: dts: starfive: visionfive 2: update sound and codec dt node name Jisheng Zhang
2024-01-31 13:25 ` Jisheng Zhang
2024-04-19 22:05 ` Emil Renner Berthing
2024-04-19 22:05 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 4/6] riscv: dts: starfive: visionfive 2: use cpus label for timebase freq Jisheng Zhang
2024-01-31 13:25 ` Jisheng Zhang
2024-04-19 22:05 ` Emil Renner Berthing
2024-04-19 22:05 ` Emil Renner Berthing
2024-01-31 13:25 ` [PATCH v3 5/6] riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards Jisheng Zhang
2024-01-31 13:25 ` Jisheng Zhang
2024-01-31 13:26 ` [PATCH v3 6/6] riscv: dts: starfive: add Milkv Mars board device tree Jisheng Zhang
2024-01-31 13:26 ` Jisheng Zhang
2024-02-06 19:13 ` Conor Dooley
2024-02-06 19:13 ` Conor Dooley
2024-03-27 18:06 ` Conor Dooley
2024-03-27 18:06 ` Conor Dooley
2024-03-28 10:08 ` Jisheng Zhang
2024-03-28 10:08 ` Jisheng Zhang
2024-03-28 12:45 ` Emil Renner Berthing
2024-03-28 12:45 ` Emil Renner Berthing
2024-03-29 2:32 ` Jisheng Zhang
2024-03-29 2:32 ` Jisheng Zhang
2024-03-28 21:28 ` Heinrich Schuchardt
2024-03-28 21:28 ` Heinrich Schuchardt
2024-03-29 2:31 ` Jisheng Zhang
2024-03-29 2:31 ` Jisheng Zhang
2024-04-01 13:28 ` Heinrich Schuchardt
2024-04-01 13:28 ` Heinrich Schuchardt
2024-04-01 14:44 ` Jisheng Zhang
2024-04-01 14:44 ` Jisheng Zhang
2024-04-19 22:11 ` Emil Renner Berthing
2024-04-19 22:11 ` Emil Renner Berthing
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240131132600.4067-1-jszhang@kernel.org \
--to=jszhang@kernel.org \
--cc=aou@eecs.berkeley.edu \
--cc=conor@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@esmil.dk \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-riscv@lists.infradead.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.