Re: [PATCH v4 00/12] arm64: dts: imx8mm-kontron: DT updates

From: Shawn Guo <shawn.gsc@gmail.com>
To: Frieder Schrempf <frieder@fris.de>
Cc: Conor Dooley <conor+dt@kernel.org>,
	devicetree@vger.kernel.org,
	Frieder Schrempf <frieder.schrempf@kontron.de>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
	Sascha Hauer <s.hauer@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Fabio Estevam <festevam@gmail.com>,
	Krzysztof Kozlowski <krzk@kernel.org>,
	NXP Linux Team <linux-imx@nxp.com>,
	Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: Re: [PATCH v4 00/12] arm64: dts: imx8mm-kontron: DT updates
Date: Thu, 1 Feb 2024 15:42:10 +0800	[thread overview]
Message-ID: <20240201073833.GB463595@dragon> (raw)
In-Reply-To: <20240108084945.75356-1-frieder@fris.de>

On Mon, Jan 08, 2024 at 09:48:57AM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf@kontron.de>
> 
> This patchset contains several improvements and updates for the devicetrees
> for the i.MX8MM modules and boards by Kontron Electronics GmbH.
> 
> * Misc cleanups and small fixes
> * OSM-S i.MX8MM module refactoring and update to latest HW revision
> 
> Changes in v4:
> * Rebase to Shawn's imx/dt64 branch
> * Drop patches 1 and 2 (display support) as there are unresolved DTC warnings
>   and I am not sure how to resolve them at the moment.
> 
> Changes in v3:
> * Address Shawn's review comments for patch 1, 2 and 14 (thanks!)
> 
> Changes in v2:
> * Rework DSI mux GPIO logic to be compatible with overlay
> * Switch from 4 to 2 DSI lanes for LVDS bridge to fix non-working display
> 
> Frieder Schrempf (12):
>   arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on OSM-S
>     i.MX8MM
>   arm64: dts: imx8mm-kontron: Disable pullups for I2C signals on SL/BL
>     i.MX8MM
>   arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
>     on BL OSM-S board
>   arm64: dts: imx8mm-kontron: Disable pullups for onboard UART signals
>     on BL board
>   arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
>     on BL OSM-S board
>   arm64: dts: imx8mm-kontron: Disable pull resistors for SD card signals
>     on BL board
>   arm64: dts: imx8mm-kontron: Fix interrupt for RTC on OSM-S i.MX8MM
>     module
>   arm64: dts: imx8mm-kontron: Fix OSM-S devicetrees to match latest
>     hardware
>   arm64: dts: imx8mm-kontron: Disable uneffective PUE bit in SDIO IOMUX
>   arm64: dts: imx8mm-kontron: Remove useless trickle-diode-disable from
>     RTC node
>   arm64: dts: imx8mm-kontron: Add I2C EEPROM on OSM-S Kontron i.MX8MM
>   arm64: dts: imx8mm-kontron: Refactor devicetree for OSM-S module and
>     board

Applied all, thanks!

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel