From: Jarkko Nikula <jarkko.nikula@linux.intel.com>
To: linux-i2c@vger.kernel.org
Cc: Andi Shyti <andi.shyti@kernel.org>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Jan Dabros <jsd@semihalf.com>,
Jiawen Wu <jiawenwu@trustnetic.com>,
Sanket Goswami <Sanket.Goswami@amd.com>,
Basavaraj Natikar <Basavaraj.Natikar@amd.com>,
michael.j.ruhl@intel.com, Hans de Goede <hdegoede@redhat.com>,
Jarkko Nikula <jarkko.nikula@linux.intel.com>
Subject: [PATCH v2 5/9] i2c: designware: Do not enable interrupts shortly in polling mode
Date: Tue, 6 Feb 2024 16:51:54 +0200 [thread overview]
Message-ID: <20240206145158.227254-6-jarkko.nikula@linux.intel.com> (raw)
In-Reply-To: <20240206145158.227254-1-jarkko.nikula@linux.intel.com>
I was testing the polling mode txgbe_i2c_dw_xfer_quirk() on a HW where
the i2c-designware has interrupt connected and shared with other device.
I noticed there is a bogus interrupt for each transfer.
Reason for this that both polling mode functions call the
i2c_dw_xfer_init() which enable interrupts then followed by immediate
disable by the same polling mode functions. This is enough to trigger
TX_EMPTY interrupt.
Fix this by introducing a __i2c_dw_write_intr_mask() helper that unmasks
interrupts conditionally and use it in i2c_dw_xfer_init().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
drivers/i2c/busses/i2c-designware-core.h | 8 ++++++++
drivers/i2c/busses/i2c-designware-master.c | 4 +---
2 files changed, 9 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index ee93c0b4e817..353d753d9d5d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -353,6 +353,14 @@ static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev)
dev->status &= ~STATUS_ACTIVE;
}
+static inline void __i2c_dw_write_intr_mask(struct dw_i2c_dev *dev,
+ unsigned int intr_mask)
+{
+ unsigned int val = dev->flags & ACCESS_POLLING ? 0 : intr_mask;
+
+ regmap_write(dev->map, DW_IC_INTR_MASK, val);
+}
+
void __i2c_dw_disable(struct dw_i2c_dev *dev);
extern void i2c_dw_configure_master(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-master.c b/drivers/i2c/busses/i2c-designware-master.c
index e879a0f5cc97..835d82e2c5fe 100644
--- a/drivers/i2c/busses/i2c-designware-master.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -250,7 +250,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* Clear and enable interrupts */
regmap_read(dev->map, DW_IC_CLR_INTR, &dummy);
- regmap_write(dev->map, DW_IC_INTR_MASK, DW_IC_INTR_MASTER_MASK);
+ __i2c_dw_write_intr_mask(dev, DW_IC_INTR_MASTER_MASK);
}
static int i2c_dw_check_stopbit(struct dw_i2c_dev *dev)
@@ -300,7 +300,6 @@ static int amd_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msgs,
dev->msgs = msgs;
dev->msgs_num = num_msgs;
i2c_dw_xfer_init(dev);
- regmap_write(dev->map, DW_IC_INTR_MASK, 0);
/* Initiate messages read/write transaction */
for (msg_wrt_idx = 0; msg_wrt_idx < num_msgs; msg_wrt_idx++) {
@@ -384,7 +383,6 @@ static int txgbe_i2c_dw_xfer_quirk(struct i2c_adapter *adap, struct i2c_msg *msg
dev->msgs = msgs;
dev->msgs_num = num_msgs;
i2c_dw_xfer_init(dev);
- regmap_write(dev->map, DW_IC_INTR_MASK, 0);
for (msg_idx = 0; msg_idx < num_msgs; msg_idx++) {
buf = msgs[msg_idx].buf;
--
2.43.0
next prev parent reply other threads:[~2024-02-06 14:52 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-06 14:51 [PATCH v2 0/9] i2c: designware: Generic polling mode code Jarkko Nikula
2024-02-06 14:51 ` [PATCH v2 1/9] i2c: designware: Add some flexiblity to the model info Jarkko Nikula
2024-02-06 15:30 ` Andy Shevchenko
2024-02-09 14:14 ` Jarkko Nikula
2024-02-09 14:25 ` Andy Shevchenko
2024-02-06 14:51 ` [PATCH v2 2/9] i2c: designware: Convert arbitration semaphore flag as semaphore type Jarkko Nikula
2024-02-06 14:51 ` [PATCH v2 3/9] i2c: designware: Convert shared_with_punit boolean " Jarkko Nikula
2024-02-06 14:51 ` [PATCH v2 4/9] i2c: designware: Uniform initialization flow for polling mode Jarkko Nikula
2024-02-06 15:13 ` Andy Shevchenko
2024-02-06 14:51 ` Jarkko Nikula [this message]
2024-02-06 14:51 ` [PATCH v2 6/9] i2c: designware: Use accessors to DW_IC_INTR_MASK register Jarkko Nikula
2024-02-06 14:51 ` [PATCH v2 7/9] i2c: designware: Move interrupt handling functions before i2c_dw_xfer() Jarkko Nikula
2024-02-06 15:18 ` Andy Shevchenko
2024-02-06 14:51 ` [PATCH v2 8/9] i2c: designware: Fix RX FIFO depth define on Wangxun 10Gb NIC Jarkko Nikula
2024-02-06 14:51 ` [PATCH v2 9/9] i2c: designware: Implement generic polling mode code for " Jarkko Nikula
2024-02-06 15:28 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240206145158.227254-6-jarkko.nikula@linux.intel.com \
--to=jarkko.nikula@linux.intel.com \
--cc=Basavaraj.Natikar@amd.com \
--cc=Sanket.Goswami@amd.com \
--cc=andi.shyti@kernel.org \
--cc=andriy.shevchenko@linux.intel.com \
--cc=hdegoede@redhat.com \
--cc=jiawenwu@trustnetic.com \
--cc=jsd@semihalf.com \
--cc=linux-i2c@vger.kernel.org \
--cc=michael.j.ruhl@intel.com \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.