[PATCH AUTOSEL 6.7 01/44] ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt

[PATCH AUTOSEL 6.7 01/44] ext4: avoid dividing by 0 in mb_update_avg_fragment_size() when block bitmap corrupt

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 993bf0f4c393b3667830918f9247438a8f6fdb5b ]

Determine if bb_fragments is 0 instead of determining bb_free to eliminate
the risk of dividing by zero when the block bitmap is corrupted.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-6-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index ab023d709f72..a85017a78fc8 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -842,7 +842,7 @@ mb_update_avg_fragment_size(struct super_block *sb, struct ext4_group_info *grp)
 	struct ext4_sb_info *sbi = EXT4_SB(sb);
 	int new_order;
 
-	if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_free == 0)
+	if (!test_opt2(sb, MB_OPTIMIZE_SCAN) || grp->bb_fragments == 0)
 		return;
 
 	new_order = mb_avg_fragment_size_order(sb,
-- 
2.43.0

[PATCH AUTOSEL 6.7 02/44] ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 4530b3660d396a646aad91a787b6ab37cf604b53 ]

Determine if the group block bitmap is corrupted before using ac_b_ex in
ext4_mb_try_best_found() to avoid allocating blocks from a group with a
corrupted block bitmap in the following concurrency and making the
situation worse.

ext4_mb_regular_allocator
  ext4_lock_group(sb, group)
  ext4_mb_good_group
   // check if the group bbitmap is corrupted
  ext4_mb_complex_scan_group
   // Scan group gets ac_b_ex but doesn't use it
  ext4_unlock_group(sb, group)
                           ext4_mark_group_bitmap_corrupted(group)
                           // The block bitmap was corrupted during
                           // the group unlock gap.
  ext4_mb_try_best_found
    ext4_lock_group(ac->ac_sb, group)
    ext4_mb_use_best_found
      mb_mark_used
      // Allocating blocks in block bitmap corrupted group

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-7-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index a85017a78fc8..2541647ba5dd 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2282,6 +2282,9 @@ void ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		return;
 
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ex.fe_start, ex.fe_len, &ex);
 
 	if (max > 0) {
@@ -2289,6 +2292,7 @@ void ext4_mb_try_best_found(struct ext4_allocation_context *ac,
 		ext4_mb_use_best_found(ac, e4b);
 	}
 
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 }
-- 
2.43.0

[PATCH AUTOSEL 6.7 03/44] ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal()

[Sasha Levin]

From: Baokun Li <libaokun1@huawei.com>

[ Upstream commit 832698373a25950942c04a512daa652c18a9b513 ]

Places the logic for checking if the group's block bitmap is corrupt under
the protection of the group lock to avoid allocating blocks from the group
with a corrupted block bitmap.

Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240104142040.2835097-8-libaokun1@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/mballoc.c | 9 ++++-----
 1 file changed, 4 insertions(+), 5 deletions(-)

diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index 2541647ba5dd..7db1cabb672c 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2319,12 +2319,10 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 	if (err)
 		return err;
 
-	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info))) {
-		ext4_mb_unload_buddy(e4b);
-		return 0;
-	}
-
 	ext4_lock_group(ac->ac_sb, group);
+	if (unlikely(EXT4_MB_GRP_BBITMAP_CORRUPT(e4b->bd_info)))
+		goto out;
+
 	max = mb_find_extent(e4b, ac->ac_g_ex.fe_start,
 			     ac->ac_g_ex.fe_len, &ex);
 	ex.fe_logical = 0xDEADFA11; /* debug value */
@@ -2357,6 +2355,7 @@ int ext4_mb_find_by_goal(struct ext4_allocation_context *ac,
 		ac->ac_b_ex = ex;
 		ext4_mb_use_best_found(ac, e4b);
 	}
+out:
 	ext4_unlock_group(ac->ac_sb, group);
 	ext4_mb_unload_buddy(e4b);
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 04/44] Input: goodix - accept ACPI resources with gpio_count == 3 && gpio_int_idx == 0

[Sasha Levin]

From: Hans de Goede <hdegoede@redhat.com>

[ Upstream commit 180a8f12c21f41740fee09ca7f7aa98ff5bb99f8 ]

Some devices list 3 Gpio resources in the ACPI resource list for
the touchscreen:

1. GpioInt resource pointing to the GPIO used for the interrupt
2. GpioIo resource pointing to the reset GPIO
3. GpioIo resource pointing to the GPIO used for the interrupt

Note how the third extra GpioIo resource really is a duplicate
of the GpioInt provided info.

Ignore this extra GPIO, treating this setup the same as gpio_count == 2 &&
gpio_int_idx == 0 fixes the touchscreen not working on the Thunderbook
Colossus W803 rugged tablet and likely also on the CyberBook_T116K.

Reported-by: Maarten van der Schrieck
Closes: https://gitlab.com/AdyaAdya/goodix-touchscreen-linux-driver/-/issues/22
Suggested-by: Maarten van der Schrieck
Tested-by: Maarten van der Schrieck
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231223141650.10679-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/touchscreen/goodix.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index af32fbe57b63..b068ff8afbc9 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -884,7 +884,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
 		}
 	}
 
-	if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) {
+	/* Some devices with gpio_int_idx 0 list a third unused GPIO */
+	if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) {
 		ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO;
 		gpio_mapping = acpi_goodix_int_first_gpios;
 	} else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) {
-- 
2.43.0

[PATCH AUTOSEL 6.7 05/44] dmaengine: ti: edma: Add some null pointer checks to the edma_probe

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit 6e2276203ac9ff10fc76917ec9813c660f627369 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Link: https://lore.kernel.org/r/20240118031929.192192-1-chentao@kylinos.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/dma/ti/edma.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index f1f920861fa9..5f8d2e93ff3f 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -2404,6 +2404,11 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq > 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
+
 		ret = devm_request_irq(dev, irq, dma_irq_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
@@ -2420,6 +2425,11 @@ static int edma_probe(struct platform_device *pdev)
 	if (irq > 0) {
 		irq_name = devm_kasprintf(dev, GFP_KERNEL, "%s_ccerrint",
 					  dev_name(dev));
+		if (!irq_name) {
+			ret = -ENOMEM;
+			goto err_disable_pm;
+		}
+
 		ret = devm_request_irq(dev, irq, dma_ccerr_handler, 0, irq_name,
 				       ecc);
 		if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 6.7 06/44] ASoC: amd: acp: Add check for cpu dai link initialization

[Sasha Levin]

From: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>

[ Upstream commit 6cc2aa9a75f2397d42b78d4c159bc06722183c78 ]

Add condition check for cpu dai link initialization for amplifier
codec path, as same pcm id uses for both headset and speaker path
for RENOIR platforms.

Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/amd/acp/acp-mach-common.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/amd/acp/acp-mach-common.c b/sound/soc/amd/acp/acp-mach-common.c
index 34b14f2611ba..12ff0a558ea8 100644
--- a/sound/soc/amd/acp/acp-mach-common.c
+++ b/sound/soc/amd/acp/acp-mach-common.c
@@ -1428,8 +1428,13 @@ int acp_sofdsp_dai_links_create(struct snd_soc_card *card)
 	if (drv_data->amp_cpu_id == I2S_SP) {
 		links[i].name = "acp-amp-codec";
 		links[i].id = AMP_BE_ID;
-		links[i].cpus = sof_sp_virtual;
-		links[i].num_cpus = ARRAY_SIZE(sof_sp_virtual);
+		if (drv_data->platform == RENOIR) {
+			links[i].cpus = sof_sp;
+			links[i].num_cpus = ARRAY_SIZE(sof_sp);
+		} else {
+			links[i].cpus = sof_sp_virtual;
+			links[i].num_cpus = ARRAY_SIZE(sof_sp_virtual);
+		}
 		links[i].platforms = sof_component;
 		links[i].num_platforms = ARRAY_SIZE(sof_component);
 		links[i].dpcm_playback = 1;
-- 
2.43.0

[PATCH AUTOSEL 6.7 07/44] ASoC: codecs: wcd934x: drop unneeded regulator include

[Sasha Levin]

From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

[ Upstream commit 35314e39dabcfb256832654ad0e856a9fba744bd ]

Driver does not use any regulator code, so drop redundant include of
regulator/consumer.h header.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wcd934x.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/sound/soc/codecs/wcd934x.c b/sound/soc/codecs/wcd934x.c
index 1b6e376f3833..6813268e6a19 100644
--- a/sound/soc/codecs/wcd934x.c
+++ b/sound/soc/codecs/wcd934x.c
@@ -13,7 +13,6 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
-#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/slimbus.h>
 #include <sound/pcm_params.h>
-- 
2.43.0

Re: [PATCH AUTOSEL 6.7 07/44] ASoC: codecs: wcd934x: drop unneeded regulator include

[Mark Brown]

[-- Attachment #1: Type: text/plain, Size: 357 bytes --]

On Wed, Feb 07, 2024 at 04:20:34PM -0500, Sasha Levin wrote:
> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> [ Upstream commit 35314e39dabcfb256832654ad0e856a9fba744bd ]
> 
> Driver does not use any regulator code, so drop redundant include of
> regulator/consumer.h header.

This doesn't seem like an obvious stable candidate...

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]

Re: [PATCH AUTOSEL 6.7 07/44] ASoC: codecs: wcd934x: drop unneeded regulator include

[Sasha Levin]

On Thu, Feb 08, 2024 at 11:37:54AM +0000, Mark Brown wrote:
>On Wed, Feb 07, 2024 at 04:20:34PM -0500, Sasha Levin wrote:
>> From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>>
>> [ Upstream commit 35314e39dabcfb256832654ad0e856a9fba744bd ]
>>
>> Driver does not use any regulator code, so drop redundant include of
>> regulator/consumer.h header.
>
>This doesn't seem like an obvious stable candidate...

Dropped, thanks!

-- 
Thanks,
Sasha

[PATCH AUTOSEL 6.7 08/44] regulator: pwm-regulator: Add validity checks in continuous .get_voltage

[Sasha Levin]

From: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

[ Upstream commit c92688cac239794e4a1d976afa5203a4d3a2ac0e ]

Continuous regulators can be configured to operate only in a certain
duty cycle range (for example from 0..91%). Add a check to error out if
the duty cycle translates to an unsupported (or out of range) voltage.

Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://msgid.link/r/20240113224628.377993-2-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/pwm-regulator.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 2aff6db748e2..e33d10df7a76 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -158,6 +158,9 @@ static int pwm_regulator_get_voltage(struct regulator_dev *rdev)
 	pwm_get_state(drvdata->pwm, &pstate);
 
 	voltage = pwm_get_relative_duty_cycle(&pstate, duty_unit);
+	if (voltage < min(max_uV_duty, min_uV_duty) ||
+	    voltage > max(max_uV_duty, min_uV_duty))
+		return -ENOTRECOVERABLE;
 
 	/*
 	 * The dutycycle for min_uV might be greater than the one for max_uV.
-- 
2.43.0

[PATCH AUTOSEL 6.7 09/44] HID: logitech-hidpp: add support for Logitech G Pro X Superlight 2

[Sasha Levin]

From: Jiri Kosina <jkosina@suse.com>

[ Upstream commit afa6ac2690bb9904ff883c6e942281e1032a484d ]

Let logitech-hidpp driver claim Logitech G Pro X Superlight 2.

Reported-by: Marcus Rückert <darix@opensu.se>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-logitech-hidpp.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index fd6d8f1d9b8f..6ef0c88e3e60 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -4610,6 +4610,8 @@ static const struct hid_device_id hidpp_devices[] = {
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC088) },
 	{ /* Logitech G Pro X Superlight Gaming Mouse over USB */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC094) },
+	{ /* Logitech G Pro X Superlight 2 Gaming Mouse over USB */
+	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0xC09b) },
 
 	{ /* G935 Gaming Headset */
 	  HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 0x0a87),
-- 
2.43.0

[PATCH AUTOSEL 6.7 10/44] ALSA: hda: Replace numeric device IDs with constant values

[Sasha Levin]

From: Rui Salvaterra <rsalvaterra@gmail.com>

[ Upstream commit 3526860f26febbe46960f9b37f5dbd5ccc109ea8 ]

We have self-explanatory constants for Intel HDA devices, let's use them instead
of magic numbers and code comments.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-2-rsalvaterra@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 2d1df3654424..98b162c8eab6 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1729,8 +1729,8 @@ static int default_bdl_pos_adj(struct azx *chip)
 	/* some exceptions: Atoms seem problematic with value 1 */
 	if (chip->pci->vendor == PCI_VENDOR_ID_INTEL) {
 		switch (chip->pci->device) {
-		case 0x0f04: /* Baytrail */
-		case 0x2284: /* Braswell */
+		case PCI_DEVICE_ID_INTEL_HDA_BYT:
+		case PCI_DEVICE_ID_INTEL_HDA_BSW:
 			return 32;
 		}
 	}
-- 
2.43.0

[PATCH AUTOSEL 6.7 11/44] ALSA: hda: Increase default bdl_pos_adj for Apollo Lake

[Sasha Levin]

From: Rui Salvaterra <rsalvaterra@gmail.com>

[ Upstream commit 56beedc88405fd8022edfd1c2e63d1bc6c95efcb ]

Apollo Lake seems to also suffer from IRQ timing issues. After being up for ~4
minutes, a Pentium N4200 system ends up falling back to workqueue-based IRQ
handling:

[  208.019906] snd_hda_intel 0000:00:0e.0: IRQ timing workaround is activated
for card #0. Suggest a bigger bdl_pos_adj.

Unfortunately, the Baytrail and Braswell workaround value of 32 samples isn't
enough to fix the issue here. Default to 64 samples.

Signed-off-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Link: https://lore.kernel.org/r/20240122114512.55808-3-rsalvaterra@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/hda_intel.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c
index 98b162c8eab6..a058de076e8a 100644
--- a/sound/pci/hda/hda_intel.c
+++ b/sound/pci/hda/hda_intel.c
@@ -1732,6 +1732,8 @@ static int default_bdl_pos_adj(struct azx *chip)
 		case PCI_DEVICE_ID_INTEL_HDA_BYT:
 		case PCI_DEVICE_ID_INTEL_HDA_BSW:
 			return 32;
+		case PCI_DEVICE_ID_INTEL_HDA_APL:
+			return 64;
 		}
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 12/44] HID: nvidia-shield: Add missing null pointer checks to LED initialization

[Sasha Levin]

From: Kunwu Chan <chentao@kylinos.cn>

[ Upstream commit b6eda11c44dc89a681e1c105f0f4660e69b1e183 ]

devm_kasprintf() returns a pointer to dynamically allocated memory
which can be NULL upon failure. Ensure the allocation was successful
by checking the pointer validity.

[jkosina@suse.com: tweak changelog a bit]
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/hid/hid-nvidia-shield.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/hid/hid-nvidia-shield.c b/drivers/hid/hid-nvidia-shield.c
index 82d0a77359c4..58b15750dbb0 100644
--- a/drivers/hid/hid-nvidia-shield.c
+++ b/drivers/hid/hid-nvidia-shield.c
@@ -800,6 +800,8 @@ static inline int thunderstrike_led_create(struct thunderstrike *ts)
 
 	led->name = devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL,
 				   "thunderstrike%d:blue:led", ts->id);
+	if (!led->name)
+		return -ENOMEM;
 	led->max_brightness = 1;
 	led->flags = LED_CORE_SUSPENDRESUME | LED_RETAIN_AT_SHUTDOWN;
 	led->brightness_get = &thunderstrike_led_get_brightness;
@@ -831,6 +833,8 @@ static inline int thunderstrike_psy_create(struct shield_device *shield_dev)
 	shield_dev->battery_dev.desc.name =
 		devm_kasprintf(&ts->base.hdev->dev, GFP_KERNEL,
 			       "thunderstrike_%d", ts->id);
+	if (!shield_dev->battery_dev.desc.name)
+		return -ENOMEM;
 
 	shield_dev->battery_dev.psy = power_supply_register(
 		&hdev->dev, &shield_dev->battery_dev.desc, &psy_cfg);
-- 
2.43.0

[PATCH AUTOSEL 6.7 13/44] nvmet-tcp: fix nvme tcp ida memory leak

[Sasha Levin]

From: Guixin Liu <kanie@linux.alibaba.com>

[ Upstream commit 47c5dd66c1840524572dcdd956f4af2bdb6fbdff ]

The nvmet_tcp_queue_ida should be destroy when the nvmet-tcp module
exit.

Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/tcp.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index 80db64a4b09f..bb42ae42b1c6 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -2204,6 +2204,7 @@ static void __exit nvmet_tcp_exit(void)
 	flush_workqueue(nvmet_wq);
 
 	destroy_workqueue(nvmet_tcp_wq);
+	ida_destroy(&nvmet_tcp_queue_ida);
 }
 
 module_init(nvmet_tcp_init);
-- 
2.43.0

[PATCH AUTOSEL 6.7 14/44] usb: ucsi_acpi: Quirk to ack a connector change ack cmd

[Sasha Levin]

From: "Christian A. Ehrhardt" <lk@c--e.de>

[ Upstream commit f3be347ea42dbb0358cd8b2d8dc543a23b70a976 ]

The PPM on some Dell laptops seems to expect that the ACK_CC_CI
command to clear the connector change notification is in turn
followed by another ACK_CC_CI to acknowledge the ACK_CC_CI command
itself. This is in violation of the UCSI spec that states:

    "The only notification that is not acknowledged by the OPM is
     the command completion notification for the ACK_CC_CI or the
     PPM_RESET command."

Add a quirk to send this ack anyway.
Apply the quirk to all Dell systems.

On the first command that acks a connector change send a dummy
command to determine if it runs into a timeout. Only activate
the quirk if it does. This ensure that we do not break Dell
systems that do not need the quirk.

Signed-off-by: "Christian A. Ehrhardt" <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240121204123.275441-4-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/usb/typec/ucsi/ucsi_acpi.c | 71 ++++++++++++++++++++++++++++--
 1 file changed, 68 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/typec/ucsi/ucsi_acpi.c b/drivers/usb/typec/ucsi/ucsi_acpi.c
index 6bbf490ac401..5fbd5a218341 100644
--- a/drivers/usb/typec/ucsi/ucsi_acpi.c
+++ b/drivers/usb/typec/ucsi/ucsi_acpi.c
@@ -25,6 +25,8 @@ struct ucsi_acpi {
 	unsigned long flags;
 	guid_t guid;
 	u64 cmd;
+	bool dell_quirk_probed;
+	bool dell_quirk_active;
 };
 
 static int ucsi_acpi_dsm(struct ucsi_acpi *ua, int func)
@@ -119,12 +121,73 @@ static const struct ucsi_operations ucsi_zenbook_ops = {
 	.async_write = ucsi_acpi_async_write
 };
 
-static const struct dmi_system_id zenbook_dmi_id[] = {
+/*
+ * Some Dell laptops expect that an ACK command with the
+ * UCSI_ACK_CONNECTOR_CHANGE bit set is followed by a (separate)
+ * ACK command that only has the UCSI_ACK_COMMAND_COMPLETE bit set.
+ * If this is not done events are not delivered to OSPM and
+ * subsequent commands will timeout.
+ */
+static int
+ucsi_dell_sync_write(struct ucsi *ucsi, unsigned int offset,
+		     const void *val, size_t val_len)
+{
+	struct ucsi_acpi *ua = ucsi_get_drvdata(ucsi);
+	u64 cmd = *(u64 *)val, ack = 0;
+	int ret;
+
+	if (UCSI_COMMAND(cmd) == UCSI_ACK_CC_CI &&
+	    cmd & UCSI_ACK_CONNECTOR_CHANGE)
+		ack = UCSI_ACK_CC_CI | UCSI_ACK_COMMAND_COMPLETE;
+
+	ret = ucsi_acpi_sync_write(ucsi, offset, val, val_len);
+	if (ret != 0)
+		return ret;
+	if (ack == 0)
+		return ret;
+
+	if (!ua->dell_quirk_probed) {
+		ua->dell_quirk_probed = true;
+
+		cmd = UCSI_GET_CAPABILITY;
+		ret = ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &cmd,
+					   sizeof(cmd));
+		if (ret == 0)
+			return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL,
+						    &ack, sizeof(ack));
+		if (ret != -ETIMEDOUT)
+			return ret;
+
+		ua->dell_quirk_active = true;
+		dev_err(ua->dev, "Firmware bug: Additional ACK required after ACKing a connector change.\n");
+		dev_err(ua->dev, "Firmware bug: Enabling workaround\n");
+	}
+
+	if (!ua->dell_quirk_active)
+		return ret;
+
+	return ucsi_acpi_sync_write(ucsi, UCSI_CONTROL, &ack, sizeof(ack));
+}
+
+static const struct ucsi_operations ucsi_dell_ops = {
+	.read = ucsi_acpi_read,
+	.sync_write = ucsi_dell_sync_write,
+	.async_write = ucsi_acpi_async_write
+};
+
+static const struct dmi_system_id ucsi_acpi_quirks[] = {
 	{
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
 			DMI_MATCH(DMI_PRODUCT_NAME, "ZenBook UX325UA_UM325UA"),
 		},
+		.driver_data = (void *)&ucsi_zenbook_ops,
+	},
+	{
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		},
+		.driver_data = (void *)&ucsi_dell_ops,
 	},
 	{ }
 };
@@ -151,6 +214,7 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
 {
 	struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
 	const struct ucsi_operations *ops = &ucsi_acpi_ops;
+	const struct dmi_system_id *id;
 	struct ucsi_acpi *ua;
 	struct resource *res;
 	acpi_status status;
@@ -180,8 +244,9 @@ static int ucsi_acpi_probe(struct platform_device *pdev)
 	init_completion(&ua->complete);
 	ua->dev = &pdev->dev;
 
-	if (dmi_check_system(zenbook_dmi_id))
-		ops = &ucsi_zenbook_ops;
+	id = dmi_first_match(ucsi_acpi_quirks);
+	if (id)
+		ops = id->driver_data;
 
 	ua->ucsi = ucsi_create(&pdev->dev, ops);
 	if (IS_ERR(ua->ucsi))
-- 
2.43.0

[PATCH AUTOSEL 6.7 15/44] ALSA: usb-audio: Check presence of valid altsetting control

[Sasha Levin]

From: Alexander Tsoy <alexander@tsoy.me>

[ Upstream commit 346f59d1e8ed0eed41c80e1acb657e484c308e6a ]

Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.

MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:

[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1

Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/format.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/sound/usb/format.c b/sound/usb/format.c
index ab5fed9f55b6..3b45d0ee7693 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -470,9 +470,11 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip,
 					   int clock)
 {
 	struct usb_device *dev = chip->dev;
+	struct usb_host_interface *alts;
 	unsigned int *table;
 	unsigned int nr_rates;
 	int i, err;
+	u32 bmControls;
 
 	/* performing the rate verification may lead to unexpected USB bus
 	 * behavior afterwards by some unknown reason.  Do this only for the
@@ -481,6 +483,24 @@ static int validate_sample_rate_table_v2v3(struct snd_usb_audio *chip,
 	if (!(chip->quirk_flags & QUIRK_FLAG_VALIDATE_RATES))
 		return 0; /* don't perform the validation as default */
 
+	alts = snd_usb_get_host_interface(chip, fp->iface, fp->altsetting);
+	if (!alts)
+		return 0;
+
+	if (fp->protocol == UAC_VERSION_3) {
+		struct uac3_as_header_descriptor *as = snd_usb_find_csint_desc(
+				alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+		bmControls = le32_to_cpu(as->bmControls);
+	} else {
+		struct uac2_as_header_descriptor *as = snd_usb_find_csint_desc(
+				alts->extra, alts->extralen, NULL, UAC_AS_GENERAL);
+		bmControls = as->bmControls;
+	}
+
+	if (!uac_v2v3_control_is_readable(bmControls,
+				UAC2_AS_VAL_ALT_SETTINGS))
+		return 0;
+
 	table = kcalloc(fp->nr_rates, sizeof(*table), GFP_KERNEL);
 	if (!table)
 		return -ENOMEM;
-- 
2.43.0

[PATCH AUTOSEL 6.7 16/44] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-spdif.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 702386823d17..f41c30955857 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -577,6 +577,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = {
 		.compatible = "allwinner,sun50i-h6-spdif",
 		.data = &sun50i_h6_spdif_quirks,
 	},
+	{
+		.compatible = "allwinner,sun50i-h616-spdif",
+		/* Essentially the same as the H6, but without RX */
+		.data = &sun50i_h6_spdif_quirks,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
-- 
2.43.0

[PATCH AUTOSEL 6.7 16/44] ASoC: sunxi: sun4i-spdif: Add support for Allwinner H616

[Sasha Levin]

From: Chen-Yu Tsai <wens@csie.org>

[ Upstream commit 0adf963b8463faa44653e22e56ce55f747e68868 ]

The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.

Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/sunxi/sun4i-spdif.c | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/sound/soc/sunxi/sun4i-spdif.c b/sound/soc/sunxi/sun4i-spdif.c
index 702386823d17..f41c30955857 100644
--- a/sound/soc/sunxi/sun4i-spdif.c
+++ b/sound/soc/sunxi/sun4i-spdif.c
@@ -577,6 +577,11 @@ static const struct of_device_id sun4i_spdif_of_match[] = {
 		.compatible = "allwinner,sun50i-h6-spdif",
 		.data = &sun50i_h6_spdif_quirks,
 	},
+	{
+		.compatible = "allwinner,sun50i-h616-spdif",
+		/* Essentially the same as the H6, but without RX */
+		.data = &sun50i_h6_spdif_quirks,
+	},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, sun4i_spdif_of_match);
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH AUTOSEL 6.7 17/44] ALSA: hda: cs35l41: Support additional ASUS Zenbook UX3402VA

[Sasha Levin]

From: Kenzo Gomez <kenzo.sgomez@gmail.com>

[ Upstream commit c16dfab33f99fc3ff43d48253bc2784ccb84c1de ]

Add new model entry into configuration table.

Signed-off-by: Kenzo Gomez <kenzo.sgomez@gmail.com>
Link: https://lore.kernel.org/r/20240127164621.26431-1-kenzo.sgomez@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 35277ce890a4..59504852adc6 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -76,6 +76,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+	{ "104316A3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104317F3", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
@@ -410,6 +411,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "10431533", generic_dsd_config },
 	{ "CSC3551", "10431573", generic_dsd_config },
 	{ "CSC3551", "10431663", generic_dsd_config },
+	{ "CSC3551", "104316A3", generic_dsd_config },
 	{ "CSC3551", "104316D3", generic_dsd_config },
 	{ "CSC3551", "104316F3", generic_dsd_config },
 	{ "CSC3551", "104317F3", generic_dsd_config },
-- 
2.43.0

[PATCH AUTOSEL 6.7 18/44] ALSA: hda: cs35l41: Support ASUS Zenbook UM3402YAR

[Sasha Levin]

From: Chhayly Leang <clw.leang@gmail.com>

[ Upstream commit be220d2e5544ff094142d263db5cf94d034b5e39 ]

Adds sound support for ASUS Zenbook UM3402YAR with missing DSD

Signed-off-by: Chhayly Leang <clw.leang@gmail.com>
Link: https://lore.kernel.org/r/20240126080912.87422-1-clw.leang@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/pci/hda/cs35l41_hda_property.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/sound/pci/hda/cs35l41_hda_property.c b/sound/pci/hda/cs35l41_hda_property.c
index 59504852adc6..d74cf11eef1e 100644
--- a/sound/pci/hda/cs35l41_hda_property.c
+++ b/sound/pci/hda/cs35l41_hda_property.c
@@ -76,6 +76,7 @@ static const struct cs35l41_config cs35l41_config_table[] = {
 	{ "10431533", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 1000, 4500, 24 },
 	{ "10431573", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 1000, 4500, 24 },
 	{ "10431663", 2, INTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, -1, 0, 1000, 4500, 24 },
+	{ "10431683", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 0, 1, -1, 0, 0, 0 },
 	{ "104316A3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316D3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
 	{ "104316F3", 2, EXTERNAL, { CS35L41_LEFT, CS35L41_RIGHT, 0, 0 }, 1, 2, 0, 0, 0, 0 },
@@ -411,6 +412,7 @@ static const struct cs35l41_prop_model cs35l41_prop_model_table[] = {
 	{ "CSC3551", "10431533", generic_dsd_config },
 	{ "CSC3551", "10431573", generic_dsd_config },
 	{ "CSC3551", "10431663", generic_dsd_config },
+	{ "CSC3551", "10431683", generic_dsd_config },
 	{ "CSC3551", "104316A3", generic_dsd_config },
 	{ "CSC3551", "104316D3", generic_dsd_config },
 	{ "CSC3551", "104316F3", generic_dsd_config },
-- 
2.43.0

[PATCH AUTOSEL 6.7 19/44] regulator (max5970): Fix IRQ handler

[Sasha Levin]

From: Patrick Rudolph <patrick.rudolph@9elements.com>

[ Upstream commit a3fa9838e8140584a6f338e8516f2b05d3bea812 ]

The max5970 datasheet gives the impression that IRQ status bits must
be cleared by writing a one to set bits, as those are marked with 'R/C',
however tests showed that a zero must be written.

Fixes an IRQ storm as the interrupt handler actually clears the IRQ
status bits.

Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://msgid.link/r/20240130150257.3643657-1-naresh.solanki@9elements.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/regulator/max5970-regulator.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/regulator/max5970-regulator.c b/drivers/regulator/max5970-regulator.c
index bc88a40a88d4..830a1c4cd705 100644
--- a/drivers/regulator/max5970-regulator.c
+++ b/drivers/regulator/max5970-regulator.c
@@ -392,7 +392,7 @@ static int max597x_regmap_read_clear(struct regmap *map, unsigned int reg,
 		return ret;
 
 	if (*val)
-		return regmap_write(map, reg, *val);
+		return regmap_write(map, reg, 0);
 
 	return 0;
 }
-- 
2.43.0

[PATCH AUTOSEL 6.7 20/44] spi: sh-msiof: avoid integer overflow in constants

[Sasha Levin]

From: Wolfram Sang <wsa+renesas@sang-engineering.com>

[ Upstream commit 6500ad28fd5d67d5ca0fee9da73c463090842440 ]

cppcheck rightfully warned:

 drivers/spi/spi-sh-msiof.c:792:28: warning: Signed integer overflow for expression '7<<29'. [integerOverflow]
 sh_msiof_write(p, SIFCTR, SIFCTR_TFWM_1 | SIFCTR_RFWM_1);

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://msgid.link/r/20240130094053.10672-1-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/spi/spi-sh-msiof.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c
index cfc3b1ddbd22..6f12e4fb2e2e 100644
--- a/drivers/spi/spi-sh-msiof.c
+++ b/drivers/spi/spi-sh-msiof.c
@@ -136,14 +136,14 @@ struct sh_msiof_spi_priv {
 
 /* SIFCTR */
 #define SIFCTR_TFWM_MASK	GENMASK(31, 29)	/* Transmit FIFO Watermark */
-#define SIFCTR_TFWM_64		(0 << 29)	/*  Transfer Request when 64 empty stages */
-#define SIFCTR_TFWM_32		(1 << 29)	/*  Transfer Request when 32 empty stages */
-#define SIFCTR_TFWM_24		(2 << 29)	/*  Transfer Request when 24 empty stages */
-#define SIFCTR_TFWM_16		(3 << 29)	/*  Transfer Request when 16 empty stages */
-#define SIFCTR_TFWM_12		(4 << 29)	/*  Transfer Request when 12 empty stages */
-#define SIFCTR_TFWM_8		(5 << 29)	/*  Transfer Request when 8 empty stages */
-#define SIFCTR_TFWM_4		(6 << 29)	/*  Transfer Request when 4 empty stages */
-#define SIFCTR_TFWM_1		(7 << 29)	/*  Transfer Request when 1 empty stage */
+#define SIFCTR_TFWM_64		(0UL << 29)	/*  Transfer Request when 64 empty stages */
+#define SIFCTR_TFWM_32		(1UL << 29)	/*  Transfer Request when 32 empty stages */
+#define SIFCTR_TFWM_24		(2UL << 29)	/*  Transfer Request when 24 empty stages */
+#define SIFCTR_TFWM_16		(3UL << 29)	/*  Transfer Request when 16 empty stages */
+#define SIFCTR_TFWM_12		(4UL << 29)	/*  Transfer Request when 12 empty stages */
+#define SIFCTR_TFWM_8		(5UL << 29)	/*  Transfer Request when 8 empty stages */
+#define SIFCTR_TFWM_4		(6UL << 29)	/*  Transfer Request when 4 empty stages */
+#define SIFCTR_TFWM_1		(7UL << 29)	/*  Transfer Request when 1 empty stage */
 #define SIFCTR_TFUA_MASK	GENMASK(26, 20) /* Transmit FIFO Usable Area */
 #define SIFCTR_TFUA_SHIFT	20
 #define SIFCTR_TFUA(i)		((i) << SIFCTR_TFUA_SHIFT)
-- 
2.43.0

[PATCH AUTOSEL 6.7 21/44] Input: xpad - add Lenovo Legion Go controllers

[Sasha Levin]

From: Brenton Simpson <appsforartists@google.com>

[ Upstream commit 80441f76ee67002437db61f3b317ed80cce085d2 ]

The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.

The Legion Go firmware presents these controls as a USB hub with various
devices attached.  In its default state, the gamepad is presented as an
Xbox controller connected to this hub.  (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)

This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:

- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.

The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules.  Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.

After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box.  The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.

Signed-off-by: Brenton Simpson <appsforartists@google.com>
Link: https://lore.kernel.org/r/20240118183546.418064-1-appsforartists@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/joystick/xpad.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index e2c1848182de..d0bb3edfd0a0 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -294,6 +294,7 @@ static const struct xpad_device {
 	{ 0x1689, 0xfd00, "Razer Onza Tournament Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfd01, "Razer Onza Classic Edition", 0, XTYPE_XBOX360 },
 	{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
+	{ 0x17ef, 0x6182, "Lenovo Legion Controller for Windows", 0, XTYPE_XBOX360 },
 	{ 0x1949, 0x041a, "Amazon Game Controller", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0002, "Harmonix Rock Band Guitar", 0, XTYPE_XBOX360 },
 	{ 0x1bad, 0x0003, "Harmonix Rock Band Drumkit", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX360 },
@@ -491,6 +492,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOX360_VENDOR(0x15e4),		/* Numark Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x162e),		/* Joytech Xbox 360 controllers */
 	XPAD_XBOX360_VENDOR(0x1689),		/* Razer Onza */
+	XPAD_XBOX360_VENDOR(0x17ef),		/* Lenovo */
 	XPAD_XBOX360_VENDOR(0x1949),		/* Amazon controllers */
 	XPAD_XBOX360_VENDOR(0x1bad),		/* Harmonix Rock Band guitar and drums */
 	XPAD_XBOX360_VENDOR(0x20d6),		/* PowerA controllers */
-- 
2.43.0

[PATCH AUTOSEL 6.7 22/44] misc: open-dice: Fix spurious lockdep warning

[Sasha Levin]

From: Will Deacon <will@kernel.org>

[ Upstream commit ac9762a74c7ca7cbfcb4c65f5871373653a046ac ]

When probing the open-dice driver with PROVE_LOCKING=y, lockdep
complains that the mutex in 'drvdata->lock' has a non-static key:

 | INFO: trying to register non-static key.
 | The code is fine but needs lockdep annotation, or maybe
 | you didn't initialize this object before use?
 | turning off the locking correctness validator.

Fix the problem by initialising the mutex memory with mutex_init()
instead of __MUTEX_INITIALIZER().

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Brazdil <dbrazdil@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240126152410.10148-1-will@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/misc/open-dice.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/misc/open-dice.c b/drivers/misc/open-dice.c
index 8aea2d070a40..d279a4f195e2 100644
--- a/drivers/misc/open-dice.c
+++ b/drivers/misc/open-dice.c
@@ -140,7 +140,6 @@ static int __init open_dice_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	*drvdata = (struct open_dice_drvdata){
-		.lock = __MUTEX_INITIALIZER(drvdata->lock),
 		.rmem = rmem,
 		.misc = (struct miscdevice){
 			.parent	= dev,
@@ -150,6 +149,7 @@ static int __init open_dice_probe(struct platform_device *pdev)
 			.mode	= 0600,
 		},
 	};
+	mutex_init(&drvdata->lock);
 
 	/* Index overflow check not needed, misc_register() will fail. */
 	snprintf(drvdata->name, sizeof(drvdata->name), DRIVER_NAME"%u", dev_idx++);
-- 
2.43.0

[PATCH AUTOSEL 6.7 23/44] netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new

[Sasha Levin]

From: Xin Long <lucien.xin@gmail.com>

[ Upstream commit 6e348067ee4bc5905e35faa3a8fafa91c9124bc7 ]

The annotation says in sctp_new(): "If it is a shutdown ack OOTB packet, we
expect a return shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8)".
However, it does not check SCTP_CID_SHUTDOWN_ACK before setting vtag[REPLY]
in the conntrack entry(ct).

Because of that, if the ct in Router disappears for some reason in [1]
with the packet sequence like below:

   Client > Server: sctp (1) [INIT] [init tag: 3201533963]
   Server > Client: sctp (1) [INIT ACK] [init tag: 972498433]
   Client > Server: sctp (1) [COOKIE ECHO]
   Server > Client: sctp (1) [COOKIE ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057809]
   Server > Client: sctp (1) [SACK] [cum ack 3075057809]
   Server > Client: sctp (1) [HB REQ]
   (the ct in Router disappears somehow)  <-------- [1]
   Client > Server: sctp (1) [HB ACK]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [DATA] (B)(E) [TSN: 3075057810]
   Client > Server: sctp (1) [HB REQ]
   Client > Server: sctp (1) [ABORT]

when processing HB ACK packet in Router it calls sctp_new() to initialize
the new ct with vtag[REPLY] set to HB_ACK packet's vtag.

Later when sending DATA from Client, all the SACKs from Server will get
dropped in Router, as the SACK packet's vtag does not match vtag[REPLY]
in the ct. The worst thing is the vtag in this ct will never get fixed
by the upcoming packets from Server.

This patch fixes it by checking SCTP_CID_SHUTDOWN_ACK before setting
vtag[REPLY] in the ct in sctp_new() as the annotation says. With this
fix, it will leave vtag[REPLY] in ct to 0 in the case above, and the
next HB REQ/ACK from Server is able to fix the vtag as its value is 0
in nf_conntrack_sctp_packet().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 net/netfilter/nf_conntrack_proto_sctp.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c
index c6bd533983c1..4cc97f971264 100644
--- a/net/netfilter/nf_conntrack_proto_sctp.c
+++ b/net/netfilter/nf_conntrack_proto_sctp.c
@@ -283,7 +283,7 @@ sctp_new(struct nf_conn *ct, const struct sk_buff *skb,
 			pr_debug("Setting vtag %x for secondary conntrack\n",
 				 sh->vtag);
 			ct->proto.sctp.vtag[IP_CT_DIR_ORIGINAL] = sh->vtag;
-		} else {
+		} else if (sch->type == SCTP_CID_SHUTDOWN_ACK) {
 		/* If it is a shutdown ack OOTB packet, we expect a return
 		   shutdown complete, otherwise an ABORT Sec 8.4 (5) and (8) */
 			pr_debug("Setting vtag %x for new conn OOTB\n",
-- 
2.43.0

[PATCH AUTOSEL 6.7 24/44] drm/amdkfd: Use correct drm device for cgroup permission check

[Sasha Levin]

From: Mukul Joshi <mukul.joshi@amd.com>

[ Upstream commit 4119734e06a7f30e7e8eb666692a58b85dca0269 ]

On GFX 9.4.3, for a given KFD node, fetch the correct drm device from
XCP manager when checking for cgroup permissions.

Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
index 28162bfbe1b3..71445ab63b5e 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
@@ -1482,10 +1482,15 @@ void kfd_dec_compute_active(struct kfd_node *dev);
 
 /* Cgroup Support */
 /* Check with device cgroup if @kfd device is accessible */
-static inline int kfd_devcgroup_check_permission(struct kfd_node *kfd)
+static inline int kfd_devcgroup_check_permission(struct kfd_node *node)
 {
 #if defined(CONFIG_CGROUP_DEVICE) || defined(CONFIG_CGROUP_BPF)
-	struct drm_device *ddev = adev_to_drm(kfd->adev);
+	struct drm_device *ddev;
+
+	if (node->xcp)
+		ddev = node->xcp->ddev;
+	else
+		ddev = adev_to_drm(node->adev);
 
 	return devcgroup_check_permission(DEVCG_DEV_CHAR, DRM_MAJOR,
 					  ddev->render->index,
-- 
2.43.0

[PATCH AUTOSEL 6.7 25/44] drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhz

[Sasha Levin]

From: Sohaib Nadeem <sohaib.nadeem@amd.com>

[ Upstream commit 2ff33c759a4247c84ec0b7815f1f223e155ba82a ]

[why]
Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased
to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware
requirement will still be satisfied. Increasing min DCFCLK addresses
underflow issues (underflow occurs when phantom pipe is turned on for some
Sub-Viewport configs).

[how]
Increasing DCFCLK by raising the min_dcfclk_mhz

Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
index 92e2ddc9ab7e..67497d7d66d2 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn32/dcn32_fpu.c
@@ -2719,7 +2719,7 @@ static int build_synthetic_soc_states(bool disable_dc_mode_overwrite, struct clk
 	struct _vcs_dpi_voltage_scaling_st entry = {0};
 	struct clk_limit_table_entry max_clk_data = {0};
 
-	unsigned int min_dcfclk_mhz = 199, min_fclk_mhz = 299;
+	unsigned int min_dcfclk_mhz = 399, min_fclk_mhz = 599;
 
 	static const unsigned int num_dcfclk_stas = 5;
 	unsigned int dcfclk_sta_targets[DC__VOLTAGE_STATES] = {199, 615, 906, 1324, 1564};
-- 
2.43.0

[PATCH AUTOSEL 6.7 26/44] drm/amd/display: fix USB-C flag update after enc10 feature init

[Sasha Levin]

From: Charlene Liu <charlene.liu@amd.com>

[ Upstream commit b5abd7f983e14054593dc91d6df2aa5f8cc67652 ]

[why]
BIOS's integration info table not following the original order
which is phy instance is ext_displaypath's array index.

[how]
Move them to follow the original order.

Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c | 4 ++--
 drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
index 501388014855..d761b0df2878 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn32/dcn32_dio_link_encoder.c
@@ -203,12 +203,12 @@ void dcn32_link_encoder_construct(
 	enc10->base.hpd_source = init_data->hpd_source;
 	enc10->base.connector = init_data->connector;
 
-	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
-		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
 
 	enc10->base.features = *enc_features;
+	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
+		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	enc10->base.transmitter = init_data->transmitter;
 
diff --git a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
index f91e08895275..3fca3dca61f0 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn35/dcn35_dio_link_encoder.c
@@ -184,8 +184,6 @@ void dcn35_link_encoder_construct(
 	enc10->base.hpd_source = init_data->hpd_source;
 	enc10->base.connector = init_data->connector;
 
-	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
-		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	enc10->base.preferred_engine = ENGINE_ID_UNKNOWN;
 
@@ -240,6 +238,8 @@ void dcn35_link_encoder_construct(
 	}
 
 	enc10->base.features.flags.bits.HDMI_6GB_EN = 1;
+	if (enc10->base.connector.id == CONNECTOR_ID_USBC)
+		enc10->base.features.flags.bits.DP_IS_USB_C = 1;
 
 	if (bp_funcs->get_connector_speed_cap_info)
 		result = bp_funcs->get_connector_speed_cap_info(enc10->base.ctx->dc_bios,
-- 
2.43.0

[PATCH AUTOSEL 6.7 27/44] drm/amd/display: Fix DPSTREAM CLK on and off sequence

[Sasha Levin]

From: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>

[ Upstream commit 31c2bf25eaf51c2d45f092284a28e97f43b54c15 ]

[Why]
Secondary DP2 display fails to light up in some instances

[How]
Clock needs to be on when DPSTREAMCLK*_EN =1. This change
moves dtbclk_p enable/disable point to make sure this is
the case

Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Daniel Miess <daniel.miess@amd.com>
Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 .../gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c |  2 +-
 .../gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c   | 11 +++++------
 2 files changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
index 9b8299d97e40..390d7ebfd8db 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dce110/dce110_hwseq.c
@@ -1182,9 +1182,9 @@ void dce110_disable_stream(struct pipe_ctx *pipe_ctx)
 		dto_params.timing = &pipe_ctx->stream->timing;
 		dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst;
 		if (dccg) {
-			dccg->funcs->set_dtbclk_dto(dccg, &dto_params);
 			dccg->funcs->disable_symclk32_se(dccg, dp_hpo_inst);
 			dccg->funcs->set_dpstreamclk(dccg, REFCLK, tg->inst, dp_hpo_inst);
+			dccg->funcs->set_dtbclk_dto(dccg, &dto_params);
 		}
 	} else if (dccg && dccg->funcs->disable_symclk_se) {
 		dccg->funcs->disable_symclk_se(dccg, stream_enc->stream_enc_inst,
diff --git a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
index 608221b0dd5d..780b94592992 100644
--- a/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
+++ b/drivers/gpu/drm/amd/display/dc/hwss/dcn20/dcn20_hwseq.c
@@ -2755,18 +2755,17 @@ void dcn20_enable_stream(struct pipe_ctx *pipe_ctx)
 	}
 
 	if (dc->link_srv->dp_is_128b_132b_signal(pipe_ctx)) {
-		dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst;
-		dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst);
-
-		phyd32clk = get_phyd32clk_src(link);
-		dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk);
-
 		dto_params.otg_inst = tg->inst;
 		dto_params.pixclk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10;
 		dto_params.num_odm_segments = get_odm_segment_count(pipe_ctx);
 		dto_params.timing = &pipe_ctx->stream->timing;
 		dto_params.ref_dtbclk_khz = dc->clk_mgr->funcs->get_dtb_ref_clk_frequency(dc->clk_mgr);
 		dccg->funcs->set_dtbclk_dto(dccg, &dto_params);
+		dp_hpo_inst = pipe_ctx->stream_res.hpo_dp_stream_enc->inst;
+		dccg->funcs->set_dpstreamclk(dccg, DTBCLK0, tg->inst, dp_hpo_inst);
+
+		phyd32clk = get_phyd32clk_src(link);
+		dccg->funcs->enable_symclk32_se(dccg, dp_hpo_inst, phyd32clk);
 	} else {
 		if (dccg->funcs->enable_symclk_se)
 			dccg->funcs->enable_symclk_se(dccg, stream_enc->stream_enc_inst,
-- 
2.43.0

[PATCH AUTOSEL 6.7 28/44] cifs: make sure that channel scaling is done only once

[Sasha Levin]

From: Shyam Prasad N <sprasad@microsoft.com>

[ Upstream commit ee36a3b345c433a846effcdcfba437c2298eeda5 ]

Following a successful cifs_tree_connect, we have the code
to scale up/down the number of channels in the session.
However, it is not protected by a lock today.

As a result, this code can be executed by several processes
that select the same channel. The core functions handle this
well, as they pick chan_lock. However, we've seen cases where
smb2_reconnect throws some warnings.

To fix that, this change introduces a flags bitmap inside the
cifs_ses structure. A new flag type is used to ensure that
only one process enters this section at any time.

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/cifsglob.h |  3 +++
 fs/smb/client/smb2pdu.c  | 18 +++++++++++++++++-
 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index 5e32c79f03a7..75ca732a1679 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -1004,6 +1004,8 @@ struct cifs_chan {
 	__u8 signkey[SMB3_SIGN_KEY_SIZE];
 };
 
+#define CIFS_SES_FLAG_SCALE_CHANNELS (0x1)
+
 /*
  * Session structure.  One of these for each uid session with a particular host
  */
@@ -1036,6 +1038,7 @@ struct cifs_ses {
 	enum securityEnum sectype; /* what security flavor was specified? */
 	bool sign;		/* is signing required? */
 	bool domainAuto:1;
+	unsigned int flags;
 	__u16 session_flags;
 	__u8 smb3signingkey[SMB3_SIGN_KEY_SIZE];
 	__u8 smb3encryptionkey[SMB3_ENC_DEC_KEY_SIZE];
diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c
index f5006aa97f5b..ab8765113392 100644
--- a/fs/smb/client/smb2pdu.c
+++ b/fs/smb/client/smb2pdu.c
@@ -399,6 +399,15 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
 		goto out;
 	}
 
+	spin_lock(&ses->ses_lock);
+	if (ses->flags & CIFS_SES_FLAG_SCALE_CHANNELS) {
+		spin_unlock(&ses->ses_lock);
+		mutex_unlock(&ses->session_mutex);
+		goto skip_add_channels;
+	}
+	ses->flags |= CIFS_SES_FLAG_SCALE_CHANNELS;
+	spin_unlock(&ses->ses_lock);
+
 	if (!rc &&
 	    (server->capabilities & SMB2_GLOBAL_CAP_MULTI_CHANNEL)) {
 		mutex_unlock(&ses->session_mutex);
@@ -428,15 +437,22 @@ smb2_reconnect(__le16 smb2_command, struct cifs_tcon *tcon,
 		if (ses->chan_max > ses->chan_count &&
 		    ses->iface_count &&
 		    !SERVER_IS_CHAN(server)) {
-			if (ses->chan_count == 1)
+			if (ses->chan_count == 1) {
 				cifs_server_dbg(VFS, "supports multichannel now\n");
+				queue_delayed_work(cifsiod_wq, &tcon->query_interfaces,
+						 (SMB_INTERFACE_POLL_INTERVAL * HZ));
+			}
 
 			cifs_try_adding_channels(ses);
 		}
 	} else {
 		mutex_unlock(&ses->session_mutex);
 	}
+
 skip_add_channels:
+	spin_lock(&ses->ses_lock);
+	ses->flags &= ~CIFS_SES_FLAG_SCALE_CHANNELS;
+	spin_unlock(&ses->ses_lock);
 
 	if (smb2_command != SMB2_INTERNAL_CMD)
 		mod_delayed_work(cifsiod_wq, &server->reconnect, 0);
-- 
2.43.0

[PATCH AUTOSEL 6.7 29/44] ASoC: wm_adsp: Don't overwrite fwf_name with the default

[Sasha Levin]

From: Richard Fitzgerald <rf@opensource.cirrus.com>

[ Upstream commit daf3f0f99cde93a066240462b7a87cdfeedc04c0 ]

There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part
name. It is trivial to select either fwf_name or cs_dsp.part as the string
to use when building the filename in wm_adsp_request_firmware_file().

This leaves fwf_name entirely owned by the codec driver.

It also avoids problems with freeing the pointer. With the original code
fwf_name was either a pointer owned by the codec driver, or a kstrdup()
created by wm_adsp. This meant wm_adsp must free it if it set it, but not
if the codec driver set it. The code was handling this by using
devm_kstrdup().
But there is no absolute requirement that wm_adsp_common_init() must be
called from probe(), so this was a pseudo-memory leak - each new call to
wm_adsp_common_init() would allocate another block of memory but these
would only be freed if the owning codec driver was removed.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/soc/codecs/wm_adsp.c | 29 ++++++++++++-----------------
 1 file changed, 12 insertions(+), 17 deletions(-)

diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c
index c01e31175015..9c0accf5e188 100644
--- a/sound/soc/codecs/wm_adsp.c
+++ b/sound/soc/codecs/wm_adsp.c
@@ -739,19 +739,25 @@ static int wm_adsp_request_firmware_file(struct wm_adsp *dsp,
 					 const char *filetype)
 {
 	struct cs_dsp *cs_dsp = &dsp->cs_dsp;
+	const char *fwf;
 	char *s, c;
 	int ret = 0;
 
+	if (dsp->fwf_name)
+		fwf = dsp->fwf_name;
+	else
+		fwf = dsp->cs_dsp.name;
+
 	if (system_name && asoc_component_prefix)
 		*filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s-%s-%s.%s", dir, dsp->part,
-				      dsp->fwf_name, wm_adsp_fw[dsp->fw].file, system_name,
+				      fwf, wm_adsp_fw[dsp->fw].file, system_name,
 				      asoc_component_prefix, filetype);
 	else if (system_name)
 		*filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s-%s.%s", dir, dsp->part,
-				      dsp->fwf_name, wm_adsp_fw[dsp->fw].file, system_name,
+				      fwf, wm_adsp_fw[dsp->fw].file, system_name,
 				      filetype);
 	else
-		*filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s.%s", dir, dsp->part, dsp->fwf_name,
+		*filename = kasprintf(GFP_KERNEL, "%s%s-%s-%s.%s", dir, dsp->part, fwf,
 				      wm_adsp_fw[dsp->fw].file, filetype);
 
 	if (*filename == NULL)
@@ -863,29 +869,18 @@ static int wm_adsp_request_firmware_files(struct wm_adsp *dsp,
 	}
 
 	adsp_err(dsp, "Failed to request firmware <%s>%s-%s-%s<-%s<%s>>.wmfw\n",
-		 cirrus_dir, dsp->part, dsp->fwf_name, wm_adsp_fw[dsp->fw].file,
-		 system_name, asoc_component_prefix);
+		 cirrus_dir, dsp->part,
+		 dsp->fwf_name ? dsp->fwf_name : dsp->cs_dsp.name,
+		 wm_adsp_fw[dsp->fw].file, system_name, asoc_component_prefix);
 
 	return -ENOENT;
 }
 
 static int wm_adsp_common_init(struct wm_adsp *dsp)
 {
-	char *p;
-
 	INIT_LIST_HEAD(&dsp->compr_list);
 	INIT_LIST_HEAD(&dsp->buffer_list);
 
-	if (!dsp->fwf_name) {
-		p = devm_kstrdup(dsp->cs_dsp.dev, dsp->cs_dsp.name, GFP_KERNEL);
-		if (!p)
-			return -ENOMEM;
-
-		dsp->fwf_name = p;
-		for (; *p != 0; ++p)
-			*p = tolower(*p);
-	}
-
 	return 0;
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 30/44] ALSA: usb-audio: Ignore clock selector errors for single connection

[Sasha Levin]

From: Alexander Tsoy <alexander@tsoy.me>

[ Upstream commit eaa1b01fe709d6a236a9cec74813e0400601fd23 ]

For devices with multiple clock sources connected to a selector, we need
to check what a clock selector control request has returned. This is
needed to ensure that a requested clock source is indeed selected and for
autoclock feature to work.

For devices with single clock source connected, if we get an error there
is nothing else we can do about it. We can't skip clock selector setup as
it is required by some devices. So lets just ignore error in this case.

This should fix various buggy Mackie devices:

[  649.109785] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[  649.111946] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)
[  649.113822] usb 1-1.3: parse_audio_format_rates_v2v3(): unable to find clock source (clock -32)

There is also interesting info from the Windows documentation [1] (this
is probably why manufacturers dont't even test this feature):

"The USB Audio 2.0 driver doesn't support clock selection. The driver
uses the Clock Source Entity, which is selected by default and never
issues a Clock Selector Control SET CUR request."

Link: https://learn.microsoft.com/en-us/windows-hardware/drivers/audio/usb-2-0-audio-drivers [1]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217314
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218175
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218342
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240201115308.17838-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 sound/usb/clock.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 33db334e6556..a676ad093d18 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -328,8 +328,16 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip,
 			if (chip->quirk_flags & QUIRK_FLAG_SKIP_CLOCK_SELECTOR)
 				return ret;
 			err = uac_clock_selector_set_val(chip, entity_id, cur);
-			if (err < 0)
+			if (err < 0) {
+				if (pins == 1) {
+					usb_audio_dbg(chip,
+						      "%s(): selector returned an error, "
+						      "assuming a firmware bug, id %d, ret %d\n",
+						      __func__, clock_id, err);
+					return ret;
+				}
 				return err;
+			}
 		}
 
 		if (!validate || ret > 0 || !chip->autoclock)
-- 
2.43.0

[PATCH AUTOSEL 6.7 31/44] nvme-fc: do not wait in vain when unloading module

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 70fbfc47a392b98e5f8dba70c6efc6839205c982 ]

The module exit path has race between deleting all controllers and
freeing 'left over IDs'. To prevent double free a synchronization
between nvme_delete_ctrl and ida_destroy has been added by the initial
commit.

There is some logic around trying to prevent from hanging forever in
wait_for_completion, though it does not handling all cases. E.g.
blktests is able to reproduce the situation where the module unload
hangs forever.

If we completely rely on the cleanup code executed from the
nvme_delete_ctrl path, all IDs will be freed eventually. This makes
calling ida_destroy unnecessary. We only have to ensure that all
nvme_delete_ctrl code has been executed before we leave
nvme_fc_exit_module. This is done by flushing the nvme_delete_wq
workqueue.

While at it, remove the unused nvme_fc_wq workqueue too.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/host/fc.c | 47 ++++++------------------------------------
 1 file changed, 6 insertions(+), 41 deletions(-)

diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index 1d51925ea67f..e0f4129c3a8e 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -221,11 +221,6 @@ static LIST_HEAD(nvme_fc_lport_list);
 static DEFINE_IDA(nvme_fc_local_port_cnt);
 static DEFINE_IDA(nvme_fc_ctrl_cnt);
 
-static struct workqueue_struct *nvme_fc_wq;
-
-static bool nvme_fc_waiting_to_unload;
-static DECLARE_COMPLETION(nvme_fc_unload_proceed);
-
 /*
  * These items are short-term. They will eventually be moved into
  * a generic FC class. See comments in module init.
@@ -255,8 +250,6 @@ nvme_fc_free_lport(struct kref *ref)
 	/* remove from transport list */
 	spin_lock_irqsave(&nvme_fc_lock, flags);
 	list_del(&lport->port_list);
-	if (nvme_fc_waiting_to_unload && list_empty(&nvme_fc_lport_list))
-		complete(&nvme_fc_unload_proceed);
 	spin_unlock_irqrestore(&nvme_fc_lock, flags);
 
 	ida_free(&nvme_fc_local_port_cnt, lport->localport.port_num);
@@ -3896,10 +3889,6 @@ static int __init nvme_fc_init_module(void)
 {
 	int ret;
 
-	nvme_fc_wq = alloc_workqueue("nvme_fc_wq", WQ_MEM_RECLAIM, 0);
-	if (!nvme_fc_wq)
-		return -ENOMEM;
-
 	/*
 	 * NOTE:
 	 * It is expected that in the future the kernel will combine
@@ -3917,7 +3906,7 @@ static int __init nvme_fc_init_module(void)
 	ret = class_register(&fc_class);
 	if (ret) {
 		pr_err("couldn't register class fc\n");
-		goto out_destroy_wq;
+		return ret;
 	}
 
 	/*
@@ -3941,8 +3930,6 @@ static int __init nvme_fc_init_module(void)
 	device_destroy(&fc_class, MKDEV(0, 0));
 out_destroy_class:
 	class_unregister(&fc_class);
-out_destroy_wq:
-	destroy_workqueue(nvme_fc_wq);
 
 	return ret;
 }
@@ -3962,45 +3949,23 @@ nvme_fc_delete_controllers(struct nvme_fc_rport *rport)
 	spin_unlock(&rport->lock);
 }
 
-static void
-nvme_fc_cleanup_for_unload(void)
+static void __exit nvme_fc_exit_module(void)
 {
 	struct nvme_fc_lport *lport;
 	struct nvme_fc_rport *rport;
-
-	list_for_each_entry(lport, &nvme_fc_lport_list, port_list) {
-		list_for_each_entry(rport, &lport->endp_list, endp_list) {
-			nvme_fc_delete_controllers(rport);
-		}
-	}
-}
-
-static void __exit nvme_fc_exit_module(void)
-{
 	unsigned long flags;
-	bool need_cleanup = false;
 
 	spin_lock_irqsave(&nvme_fc_lock, flags);
-	nvme_fc_waiting_to_unload = true;
-	if (!list_empty(&nvme_fc_lport_list)) {
-		need_cleanup = true;
-		nvme_fc_cleanup_for_unload();
-	}
+	list_for_each_entry(lport, &nvme_fc_lport_list, port_list)
+		list_for_each_entry(rport, &lport->endp_list, endp_list)
+			nvme_fc_delete_controllers(rport);
 	spin_unlock_irqrestore(&nvme_fc_lock, flags);
-	if (need_cleanup) {
-		pr_info("%s: waiting for ctlr deletes\n", __func__);
-		wait_for_completion(&nvme_fc_unload_proceed);
-		pr_info("%s: ctrl deletes complete\n", __func__);
-	}
+	flush_workqueue(nvme_delete_wq);
 
 	nvmf_unregister_transport(&nvme_fc_transport);
 
-	ida_destroy(&nvme_fc_local_port_cnt);
-	ida_destroy(&nvme_fc_ctrl_cnt);
-
 	device_destroy(&fc_class, MKDEV(0, 0));
 	class_unregister(&fc_class);
-	destroy_workqueue(nvme_fc_wq);
 }
 
 module_init(nvme_fc_init_module);
-- 
2.43.0

[PATCH AUTOSEL 6.7 32/44] nvmet-fcloop: swap the list_add_tail arguments

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit dcfad4ab4d6733f2861cd241d8532a0004fc835a ]

The first argument of list_add_tail function is the new element which
should be added to the list which is the second argument. Swap the
arguments to allow processing more than one element at a time.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fcloop.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c
index c65a73433c05..e6d4226827b5 100644
--- a/drivers/nvme/target/fcloop.c
+++ b/drivers/nvme/target/fcloop.c
@@ -358,7 +358,7 @@ fcloop_h2t_ls_req(struct nvme_fc_local_port *localport,
 	if (!rport->targetport) {
 		tls_req->status = -ECONNREFUSED;
 		spin_lock(&rport->lock);
-		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &rport->ls_list);
 		spin_unlock(&rport->lock);
 		queue_work(nvmet_wq, &rport->ls_work);
 		return ret;
@@ -391,7 +391,7 @@ fcloop_h2t_xmt_ls_rsp(struct nvmet_fc_target_port *targetport,
 	if (remoteport) {
 		rport = remoteport->private;
 		spin_lock(&rport->lock);
-		list_add_tail(&rport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &rport->ls_list);
 		spin_unlock(&rport->lock);
 		queue_work(nvmet_wq, &rport->ls_work);
 	}
@@ -446,7 +446,7 @@ fcloop_t2h_ls_req(struct nvmet_fc_target_port *targetport, void *hosthandle,
 	if (!tport->remoteport) {
 		tls_req->status = -ECONNREFUSED;
 		spin_lock(&tport->lock);
-		list_add_tail(&tport->ls_list, &tls_req->ls_list);
+		list_add_tail(&tls_req->ls_list, &tport->ls_list);
 		spin_unlock(&tport->lock);
 		queue_work(nvmet_wq, &tport->ls_work);
 		return ret;
-- 
2.43.0

[PATCH AUTOSEL 6.7 33/44] nvmet-fc: release reference on target port

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit c691e6d7e13dab81ac8c7489c83b5dea972522a5 ]

In case we return early out of __nvmet_fc_finish_ls_req() we still have
to release the reference on the target port.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index bd59990b5250..8cd1ef293769 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -360,7 +360,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 
 	if (!lsop->req_queued) {
 		spin_unlock_irqrestore(&tgtport->lock, flags);
-		return;
+		goto out_puttgtport;
 	}
 
 	list_del(&lsop->lsreq_list);
@@ -373,6 +373,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 				  (lsreq->rqstlen + lsreq->rsplen),
 				  DMA_BIDIRECTIONAL);
 
+out_puttgtport:
 	nvmet_fc_tgtport_put(tgtport);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 34/44] nvmet-fc: defer cleanup using RCU properly

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 4049dc96b8de7aeb3addcea039446e464726a525 ]

When the target executes a disconnect and the host triggers a reconnect
immediately, the reconnect command still finds an existing association.

The reconnect crashes later on because nvmet_fc_delete_target_assoc
blindly removes resources while the reconnect code wants to use it.

To address this, nvmet_fc_find_target_assoc should not be able to
lookup an association which is being removed. The association list
is already under RCU lifetime management, so let's properly use it
and remove the association from the list and wait for a grace period
before cleaning up all. This means we also can drop the RCU management
on the queues, because this is now handled via the association itself.

A second step split the execution context so that the initial disconnect
command can complete without running the reconnect code in the same
context. As usual, this is done by deferring the ->done to a workqueue.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 83 ++++++++++++++++++----------------------
 1 file changed, 37 insertions(+), 46 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 8cd1ef293769..bb0791c9c0e3 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -166,7 +166,7 @@ struct nvmet_fc_tgt_assoc {
 	struct nvmet_fc_hostport	*hostport;
 	struct nvmet_fc_ls_iod		*rcv_disconn;
 	struct list_head		a_list;
-	struct nvmet_fc_tgt_queue __rcu	*queues[NVMET_NR_QUEUES + 1];
+	struct nvmet_fc_tgt_queue 	*queues[NVMET_NR_QUEUES + 1];
 	struct kref			ref;
 	struct work_struct		del_work;
 	struct rcu_head			rcu;
@@ -803,14 +803,11 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc,
 	if (!queue)
 		return NULL;
 
-	if (!nvmet_fc_tgt_a_get(assoc))
-		goto out_free_queue;
-
 	queue->work_q = alloc_workqueue("ntfc%d.%d.%d", 0, 0,
 				assoc->tgtport->fc_target_port.port_num,
 				assoc->a_id, qid);
 	if (!queue->work_q)
-		goto out_a_put;
+		goto out_free_queue;
 
 	queue->qid = qid;
 	queue->sqsize = sqsize;
@@ -832,15 +829,13 @@ nvmet_fc_alloc_target_queue(struct nvmet_fc_tgt_assoc *assoc,
 		goto out_fail_iodlist;
 
 	WARN_ON(assoc->queues[qid]);
-	rcu_assign_pointer(assoc->queues[qid], queue);
+	assoc->queues[qid] = queue;
 
 	return queue;
 
 out_fail_iodlist:
 	nvmet_fc_destroy_fcp_iodlist(assoc->tgtport, queue);
 	destroy_workqueue(queue->work_q);
-out_a_put:
-	nvmet_fc_tgt_a_put(assoc);
 out_free_queue:
 	kfree(queue);
 	return NULL;
@@ -853,12 +848,8 @@ nvmet_fc_tgt_queue_free(struct kref *ref)
 	struct nvmet_fc_tgt_queue *queue =
 		container_of(ref, struct nvmet_fc_tgt_queue, ref);
 
-	rcu_assign_pointer(queue->assoc->queues[queue->qid], NULL);
-
 	nvmet_fc_destroy_fcp_iodlist(queue->assoc->tgtport, queue);
 
-	nvmet_fc_tgt_a_put(queue->assoc);
-
 	destroy_workqueue(queue->work_q);
 
 	kfree_rcu(queue, rcu);
@@ -970,7 +961,7 @@ nvmet_fc_find_target_queue(struct nvmet_fc_tgtport *tgtport,
 	rcu_read_lock();
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (association_id == assoc->association_id) {
-			queue = rcu_dereference(assoc->queues[qid]);
+			queue = assoc->queues[qid];
 			if (queue &&
 			    (!atomic_read(&queue->connected) ||
 			     !nvmet_fc_tgt_q_get(queue)))
@@ -1173,13 +1164,18 @@ nvmet_fc_target_assoc_free(struct kref *ref)
 	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
 	struct nvmet_fc_ls_iod	*oldls;
 	unsigned long flags;
+	int i;
+
+	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
+		if (assoc->queues[i])
+			nvmet_fc_delete_target_queue(assoc->queues[i]);
+	}
 
 	/* Send Disconnect now that all i/o has completed */
 	nvmet_fc_xmt_disconnect_assoc(assoc);
 
 	nvmet_fc_free_hostport(assoc->hostport);
 	spin_lock_irqsave(&tgtport->lock, flags);
-	list_del_rcu(&assoc->a_list);
 	oldls = assoc->rcv_disconn;
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 	/* if pending Rcv Disconnect Association LS, send rsp now */
@@ -1209,7 +1205,7 @@ static void
 nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc)
 {
 	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
-	struct nvmet_fc_tgt_queue *queue;
+	unsigned long flags;
 	int i, terminating;
 
 	terminating = atomic_xchg(&assoc->terminating, 1);
@@ -1218,29 +1214,21 @@ nvmet_fc_delete_target_assoc(struct nvmet_fc_tgt_assoc *assoc)
 	if (terminating)
 		return;
 
+	spin_lock_irqsave(&tgtport->lock, flags);
+	list_del_rcu(&assoc->a_list);
+	spin_unlock_irqrestore(&tgtport->lock, flags);
 
-	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
-		rcu_read_lock();
-		queue = rcu_dereference(assoc->queues[i]);
-		if (!queue) {
-			rcu_read_unlock();
-			continue;
-		}
+	synchronize_rcu();
 
-		if (!nvmet_fc_tgt_q_get(queue)) {
-			rcu_read_unlock();
-			continue;
-		}
-		rcu_read_unlock();
-		nvmet_fc_delete_target_queue(queue);
-		nvmet_fc_tgt_q_put(queue);
+	/* ensure all in-flight I/Os have been processed */
+	for (i = NVMET_NR_QUEUES; i >= 0; i--) {
+		if (assoc->queues[i])
+			flush_workqueue(assoc->queues[i]->work_q);
 	}
 
 	dev_info(tgtport->dev,
 		"{%d:%d} Association deleted\n",
 		tgtport->fc_target_port.port_num, assoc->a_id);
-
-	nvmet_fc_tgt_a_put(assoc);
 }
 
 static struct nvmet_fc_tgt_assoc *
@@ -1493,9 +1481,8 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (!nvmet_fc_tgt_a_get(assoc))
 			continue;
-		if (!queue_work(nvmet_wq, &assoc->del_work))
-			/* already deleting - release local reference */
-			nvmet_fc_tgt_a_put(assoc);
+		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_tgt_a_put(assoc);
 	}
 	rcu_read_unlock();
 }
@@ -1548,9 +1535,8 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port,
 			continue;
 		assoc->hostport->invalid = 1;
 		noassoc = false;
-		if (!queue_work(nvmet_wq, &assoc->del_work))
-			/* already deleting - release local reference */
-			nvmet_fc_tgt_a_put(assoc);
+		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_tgt_a_put(assoc);
 	}
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 
@@ -1582,7 +1568,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 
 		rcu_read_lock();
 		list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
-			queue = rcu_dereference(assoc->queues[0]);
+			queue = assoc->queues[0];
 			if (queue && queue->nvme_sq.ctrl == ctrl) {
 				if (nvmet_fc_tgt_a_get(assoc))
 					found_ctrl = true;
@@ -1594,9 +1580,8 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 		nvmet_fc_tgtport_put(tgtport);
 
 		if (found_ctrl) {
-			if (!queue_work(nvmet_wq, &assoc->del_work))
-				/* already deleting - release local reference */
-				nvmet_fc_tgt_a_put(assoc);
+			queue_work(nvmet_wq, &assoc->del_work);
+			nvmet_fc_tgt_a_put(assoc);
 			return;
 		}
 
@@ -1626,6 +1611,8 @@ nvmet_fc_unregister_targetport(struct nvmet_fc_target_port *target_port)
 	/* terminate any outstanding associations */
 	__nvmet_fc_free_assocs(tgtport);
 
+	flush_workqueue(nvmet_wq);
+
 	/*
 	 * should terminate LS's as well. However, LS's will be generated
 	 * at the tail end of association termination, so they likely don't
@@ -1871,9 +1858,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 				sizeof(struct fcnvme_ls_disconnect_assoc_acc)),
 			FCNVME_LS_DISCONNECT_ASSOC);
 
-	/* release get taken in nvmet_fc_find_target_assoc */
-	nvmet_fc_tgt_a_put(assoc);
-
 	/*
 	 * The rules for LS response says the response cannot
 	 * go back until ABTS's have been sent for all outstanding
@@ -1888,8 +1872,6 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 	assoc->rcv_disconn = iod;
 	spin_unlock_irqrestore(&tgtport->lock, flags);
 
-	nvmet_fc_delete_target_assoc(assoc);
-
 	if (oldls) {
 		dev_info(tgtport->dev,
 			"{%d:%d} Multiple Disconnect Association LS's "
@@ -1905,6 +1887,9 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 		nvmet_fc_xmt_ls_rsp(tgtport, oldls);
 	}
 
+	queue_work(nvmet_wq, &assoc->del_work);
+	nvmet_fc_tgt_a_put(assoc);
+
 	return false;
 }
 
@@ -2903,6 +2888,9 @@ nvmet_fc_remove_port(struct nvmet_port *port)
 
 	nvmet_fc_portentry_unbind(pe);
 
+	/* terminate any outstanding associations */
+	__nvmet_fc_free_assocs(pe->tgtport);
+
 	kfree(pe);
 }
 
@@ -2934,6 +2922,9 @@ static int __init nvmet_fc_init_module(void)
 
 static void __exit nvmet_fc_exit_module(void)
 {
+	/* ensure any shutdown operation, e.g. delete ctrls have finished */
+	flush_workqueue(nvmet_wq);
+
 	/* sanity check - all lports should be removed */
 	if (!list_empty(&nvmet_fc_target_list))
 		pr_warn("%s: targetport list not empty\n", __func__);
-- 
2.43.0

[PATCH AUTOSEL 6.7 35/44] nvmet-fc: free queue and assoc directly

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit c5e27b1a779ec25779d04c3af65aebaee6bd4304 ]

Neither struct nvmet_fc_tgt_queue nor struct nvmet_fc_tgt_assoc are data
structure which are used in a RCU context. So there is no reason to
delay the free operation.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index bb0791c9c0e3..5fd37e989106 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -145,7 +145,6 @@ struct nvmet_fc_tgt_queue {
 	struct list_head		avail_defer_list;
 	struct workqueue_struct		*work_q;
 	struct kref			ref;
-	struct rcu_head			rcu;
 	/* array of fcp_iods */
 	struct nvmet_fc_fcp_iod		fod[] __counted_by(sqsize);
 } __aligned(sizeof(unsigned long long));
@@ -169,7 +168,6 @@ struct nvmet_fc_tgt_assoc {
 	struct nvmet_fc_tgt_queue 	*queues[NVMET_NR_QUEUES + 1];
 	struct kref			ref;
 	struct work_struct		del_work;
-	struct rcu_head			rcu;
 };
 
 
@@ -852,7 +850,7 @@ nvmet_fc_tgt_queue_free(struct kref *ref)
 
 	destroy_workqueue(queue->work_q);
 
-	kfree_rcu(queue, rcu);
+	kfree(queue);
 }
 
 static void
@@ -1185,8 +1183,8 @@ nvmet_fc_target_assoc_free(struct kref *ref)
 	dev_info(tgtport->dev,
 		"{%d:%d} Association freed\n",
 		tgtport->fc_target_port.port_num, assoc->a_id);
-	kfree_rcu(assoc, rcu);
 	nvmet_fc_tgtport_put(tgtport);
+	kfree(assoc);
 }
 
 static void
-- 
2.43.0

[PATCH AUTOSEL 6.7 36/44] nvmet-fc: hold reference on hostport match

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit ca121a0f7515591dba0eb5532bfa7ace4dc153ce ]

The hostport data structure is shared between the association, this why
we keep track of the users via a refcount. So we should not decrement
the refcount on a match and free the hostport several times.

Reported by KASAN.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 2 --
 1 file changed, 2 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 5fd37e989106..6d111b03d371 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1068,8 +1068,6 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 		/* new allocation not needed */
 		kfree(newhost);
 		newhost = match;
-		/* no new allocation - release reference */
-		nvmet_fc_tgtport_put(tgtport);
 	} else {
 		newhost->tgtport = tgtport;
 		newhost->hosthandle = hosthandle;
-- 
2.43.0

[PATCH AUTOSEL 6.7 37/44] nvmet-fc: do not tack refs on tgtports from assoc

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 1c110588dd95d21782397ff3cbaa55820b4e1fad ]

The association life time is tied to the life time of the target port.
That means we should not take extra a refcount when creating a
association.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 6d111b03d371..d50af99e847d 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1108,12 +1108,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 	if (idx < 0)
 		goto out_free_assoc;
 
-	if (!nvmet_fc_tgtport_get(tgtport))
-		goto out_ida;
-
 	assoc->hostport = nvmet_fc_alloc_hostport(tgtport, hosthandle);
 	if (IS_ERR(assoc->hostport))
-		goto out_put;
+		goto out_ida;
 
 	assoc->tgtport = tgtport;
 	assoc->a_id = idx;
@@ -1143,8 +1140,6 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 
 	return assoc;
 
-out_put:
-	nvmet_fc_tgtport_put(tgtport);
 out_ida:
 	ida_free(&tgtport->assoc_cnt, idx);
 out_free_assoc:
@@ -1181,7 +1176,6 @@ nvmet_fc_target_assoc_free(struct kref *ref)
 	dev_info(tgtport->dev,
 		"{%d:%d} Association freed\n",
 		tgtport->fc_target_port.port_num, assoc->a_id);
-	nvmet_fc_tgtport_put(tgtport);
 	kfree(assoc);
 }
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 38/44] nvmet-fc: abort command when there is no binding

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 3146345c2e9c2f661527054e402b0cfad80105a4 ]

When the target port has not active port binding, there is no point in
trying to process the command as it has to fail anyway. Instead adding
checks to all commands abort the command early.

Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index d50af99e847d..1eda4fa0ae06 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1100,6 +1100,9 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 	int idx;
 	bool needrandom = true;
 
+	if (!tgtport->pe)
+		return NULL;
+
 	assoc = kzalloc(sizeof(*assoc), GFP_KERNEL);
 	if (!assoc)
 		return NULL;
@@ -2516,8 +2519,9 @@ nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 
 	fod->req.cmd = &fod->cmdiubuf.sqe;
 	fod->req.cqe = &fod->rspiubuf.cqe;
-	if (tgtport->pe)
-		fod->req.port = tgtport->pe->port;
+	if (!tgtport->pe)
+		goto transport_error;
+	fod->req.port = tgtport->pe->port;
 
 	/* clear any response payload */
 	memset(&fod->rspiubuf, 0, sizeof(fod->rspiubuf));
-- 
2.43.0

[PATCH AUTOSEL 6.7 39/44] nvmet-fc: avoid deadlock on delete association path

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit 710c69dbaccdac312e32931abcb8499c1525d397 ]

When deleting an association the shutdown path is deadlocking because we
try to flush the nvmet_wq nested. Avoid this by deadlock by deferring
the put work into its own work item.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 1eda4fa0ae06..4793d1c64401 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -111,6 +111,8 @@ struct nvmet_fc_tgtport {
 	struct nvmet_fc_port_entry	*pe;
 	struct kref			ref;
 	u32				max_sg_cnt;
+
+	struct work_struct		put_work;
 };
 
 struct nvmet_fc_port_entry {
@@ -247,6 +249,13 @@ static int nvmet_fc_tgt_a_get(struct nvmet_fc_tgt_assoc *assoc);
 static void nvmet_fc_tgt_q_put(struct nvmet_fc_tgt_queue *queue);
 static int nvmet_fc_tgt_q_get(struct nvmet_fc_tgt_queue *queue);
 static void nvmet_fc_tgtport_put(struct nvmet_fc_tgtport *tgtport);
+static void nvmet_fc_put_tgtport_work(struct work_struct *work)
+{
+	struct nvmet_fc_tgtport *tgtport =
+		container_of(work, struct nvmet_fc_tgtport, put_work);
+
+	nvmet_fc_tgtport_put(tgtport);
+}
 static int nvmet_fc_tgtport_get(struct nvmet_fc_tgtport *tgtport);
 static void nvmet_fc_handle_fcp_rqst(struct nvmet_fc_tgtport *tgtport,
 					struct nvmet_fc_fcp_iod *fod);
@@ -358,7 +367,7 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 
 	if (!lsop->req_queued) {
 		spin_unlock_irqrestore(&tgtport->lock, flags);
-		goto out_puttgtport;
+		goto out_putwork;
 	}
 
 	list_del(&lsop->lsreq_list);
@@ -371,8 +380,8 @@ __nvmet_fc_finish_ls_req(struct nvmet_fc_ls_req_op *lsop)
 				  (lsreq->rqstlen + lsreq->rsplen),
 				  DMA_BIDIRECTIONAL);
 
-out_puttgtport:
-	nvmet_fc_tgtport_put(tgtport);
+out_putwork:
+	queue_work(nvmet_wq, &tgtport->put_work);
 }
 
 static int
@@ -1397,6 +1406,7 @@ nvmet_fc_register_targetport(struct nvmet_fc_port_info *pinfo,
 	kref_init(&newrec->ref);
 	ida_init(&newrec->assoc_cnt);
 	newrec->max_sg_cnt = template->max_sgl_segments;
+	INIT_WORK(&newrec->put_work, nvmet_fc_put_tgtport_work);
 
 	ret = nvmet_fc_alloc_ls_iodlist(newrec);
 	if (ret) {
-- 
2.43.0

[PATCH AUTOSEL 6.7 40/44] nvmet-fc: take ref count on tgtport before delete assoc

[Sasha Levin]

From: Daniel Wagner <dwagner@suse.de>

[ Upstream commit fe506a74589326183297d5abdda02d0c76ae5a8b ]

We have to ensure that the tgtport is not going away
before be have remove all the associations.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/nvme/target/fc.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/nvme/target/fc.c b/drivers/nvme/target/fc.c
index 4793d1c64401..6b47279f9924 100644
--- a/drivers/nvme/target/fc.c
+++ b/drivers/nvme/target/fc.c
@@ -1091,13 +1091,28 @@ nvmet_fc_alloc_hostport(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 }
 
 static void
-nvmet_fc_delete_assoc(struct work_struct *work)
+nvmet_fc_delete_assoc(struct nvmet_fc_tgt_assoc *assoc)
+{
+	nvmet_fc_delete_target_assoc(assoc);
+	nvmet_fc_tgt_a_put(assoc);
+}
+
+static void
+nvmet_fc_delete_assoc_work(struct work_struct *work)
 {
 	struct nvmet_fc_tgt_assoc *assoc =
 		container_of(work, struct nvmet_fc_tgt_assoc, del_work);
+	struct nvmet_fc_tgtport *tgtport = assoc->tgtport;
 
-	nvmet_fc_delete_target_assoc(assoc);
-	nvmet_fc_tgt_a_put(assoc);
+	nvmet_fc_delete_assoc(assoc);
+	nvmet_fc_tgtport_put(tgtport);
+}
+
+static void
+nvmet_fc_schedule_delete_assoc(struct nvmet_fc_tgt_assoc *assoc)
+{
+	nvmet_fc_tgtport_get(assoc->tgtport);
+	queue_work(nvmet_wq, &assoc->del_work);
 }
 
 static struct nvmet_fc_tgt_assoc *
@@ -1128,7 +1143,7 @@ nvmet_fc_alloc_target_assoc(struct nvmet_fc_tgtport *tgtport, void *hosthandle)
 	assoc->a_id = idx;
 	INIT_LIST_HEAD(&assoc->a_list);
 	kref_init(&assoc->ref);
-	INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc);
+	INIT_WORK(&assoc->del_work, nvmet_fc_delete_assoc_work);
 	atomic_set(&assoc->terminating, 0);
 
 	while (needrandom) {
@@ -1484,7 +1499,7 @@ __nvmet_fc_free_assocs(struct nvmet_fc_tgtport *tgtport)
 	list_for_each_entry_rcu(assoc, &tgtport->assoc_list, a_list) {
 		if (!nvmet_fc_tgt_a_get(assoc))
 			continue;
-		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_schedule_delete_assoc(assoc);
 		nvmet_fc_tgt_a_put(assoc);
 	}
 	rcu_read_unlock();
@@ -1538,7 +1553,7 @@ nvmet_fc_invalidate_host(struct nvmet_fc_target_port *target_port,
 			continue;
 		assoc->hostport->invalid = 1;
 		noassoc = false;
-		queue_work(nvmet_wq, &assoc->del_work);
+		nvmet_fc_schedule_delete_assoc(assoc);
 		nvmet_fc_tgt_a_put(assoc);
 	}
 	spin_unlock_irqrestore(&tgtport->lock, flags);
@@ -1583,7 +1598,7 @@ nvmet_fc_delete_ctrl(struct nvmet_ctrl *ctrl)
 		nvmet_fc_tgtport_put(tgtport);
 
 		if (found_ctrl) {
-			queue_work(nvmet_wq, &assoc->del_work);
+			nvmet_fc_schedule_delete_assoc(assoc);
 			nvmet_fc_tgt_a_put(assoc);
 			return;
 		}
@@ -1890,7 +1905,7 @@ nvmet_fc_ls_disconnect(struct nvmet_fc_tgtport *tgtport,
 		nvmet_fc_xmt_ls_rsp(tgtport, oldls);
 	}
 
-	queue_work(nvmet_wq, &assoc->del_work);
+	nvmet_fc_schedule_delete_assoc(assoc);
 	nvmet_fc_tgt_a_put(assoc);
 
 	return false;
-- 
2.43.0

[PATCH AUTOSEL 6.7 41/44] cifs: do not search for channel if server is terminating

[Sasha Levin]

From: Shyam Prasad N <sprasad@microsoft.com>

[ Upstream commit 88675b22d34e6e815ad4bde09c590ccb2d50c59d ]

In order to scale down the channels, the following sequence
of operations happen:
1. server struct is marked for terminate
2. the channel is deallocated in the ses->chans array
3. at a later point the cifsd thread actually terminates the server

Between 2 and 3, there can be calls to find the channel for
a server struct. When that happens, there can be an ugly warning
that's logged. But this is expected.

So this change does two things:
1. in cifs_ses_get_chan_index, if server->terminate is set, return
2. always make sure server->terminate is set with chan_lock held

Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/sess.c    | 4 ++++
 fs/smb/client/smb2pdu.c | 2 +-
 2 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/fs/smb/client/sess.c b/fs/smb/client/sess.c
index 2d3b332a79a1..b503a4833ae0 100644
--- a/fs/smb/client/sess.c
+++ b/fs/smb/client/sess.c
@@ -75,6 +75,10 @@ cifs_ses_get_chan_index(struct cifs_ses *ses,
 {
 	unsigned int i;
 
+	/* if the channel is waiting for termination */
+	if (server->terminate)
+		return CIFS_INVAL_CHAN_INDEX;
+
 	for (i = 0; i < ses->chan_count; i++) {
 		if (ses->chans[i].server == server)
 			return i;
diff --git a/fs/smb/client/smb2pdu.c b/fs/smb/client/smb2pdu.c
index ab8765113392..bd2822ad9b22 100644
--- a/fs/smb/client/smb2pdu.c
+++ b/fs/smb/client/smb2pdu.c
@@ -178,6 +178,7 @@ cifs_chan_skip_or_disable(struct cifs_ses *ses,
 		}
 
 		ses->chans[chan_index].server = NULL;
+		server->terminate = true;
 		spin_unlock(&ses->chan_lock);
 
 		/*
@@ -188,7 +189,6 @@ cifs_chan_skip_or_disable(struct cifs_ses *ses,
 		 */
 		cifs_put_tcp_session(server, from_reconnect);
 
-		server->terminate = true;
 		cifs_signal_cifsd_for_reconnect(server, false);
 
 		/* mark primary server as needing reconnect */
-- 
2.43.0

[PATCH AUTOSEL 6.7 42/44] smb: client: increase number of PDUs allowed in a compound request

[Sasha Levin]

From: Paulo Alcantara <pc@manguebit.com>

[ Upstream commit 11d4d1dba3315f73d2d1d386f5bf4811a8241d45 ]

With the introduction of SMB2_OP_QUERY_WSL_EA, the client may now send
5 commands in a single compound request in order to query xattrs from
potential WSL reparse points, which should be fine as we currently
allow up to 5 PDUs in a single compound request.  However, if
encryption is enabled (e.g. 'seal' mount option) or enforced by the
server, current MAX_COMPOUND(5) won't be enough as we require an extra
PDU for the transform header.

Fix this by increasing MAX_COMPOUND to 7 and, while we're at it, add
an WARN_ON_ONCE() and return -EIO instead of -ENOMEM in case we
attempt to send a compound request that couldn't include the extra
transform header.

Signed-off-by: Paulo Alcantara <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/smb/client/cifsglob.h  | 2 +-
 fs/smb/client/transport.c | 4 ++--
 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/smb/client/cifsglob.h b/fs/smb/client/cifsglob.h
index 75ca732a1679..b65ce8d13143 100644
--- a/fs/smb/client/cifsglob.h
+++ b/fs/smb/client/cifsglob.h
@@ -82,7 +82,7 @@
 #define SMB_INTERFACE_POLL_INTERVAL	600
 
 /* maximum number of PDUs in one compound */
-#define MAX_COMPOUND 5
+#define MAX_COMPOUND 7
 
 /*
  * Default number of credits to keep available for SMB3.
diff --git a/fs/smb/client/transport.c b/fs/smb/client/transport.c
index 4f717ad7c21b..2d9146600371 100644
--- a/fs/smb/client/transport.c
+++ b/fs/smb/client/transport.c
@@ -428,8 +428,8 @@ smb_send_rqst(struct TCP_Server_Info *server, int num_rqst,
 	if (!(flags & CIFS_TRANSFORM_REQ))
 		return __smb_send_rqst(server, num_rqst, rqst);
 
-	if (num_rqst > MAX_COMPOUND - 1)
-		return -ENOMEM;
+	if (WARN_ON_ONCE(num_rqst > MAX_COMPOUND - 1))
+		return -EIO;
 
 	if (!server->ops->init_transform_rq) {
 		cifs_server_dbg(VFS, "Encryption requested but transform callback is missing\n");
-- 
2.43.0

[PATCH AUTOSEL 6.7 43/44] ext4: correct the hole length returned by ext4_map_blocks()

[Sasha Levin]

From: Zhang Yi <yi.zhang@huawei.com>

[ Upstream commit 6430dea07e85958fa87d0276c0c4388dd51e630b ]

In ext4_map_blocks(), if we can't find a range of mapping in the
extents cache, we are calling ext4_ext_map_blocks() to search the real
path and ext4_ext_determine_hole() to determine the hole range. But if
the querying range was partially or completely overlaped by a delalloc
extent, we can't find it in the real extent path, so the returned hole
length could be incorrect.

Fortunately, ext4_ext_put_gap_in_cache() have already handle delalloc
extent, but it searches start from the expanded hole_start, doesn't
start from the querying range, so the delalloc extent found could not be
the one that overlaped the querying range, plus, it also didn't adjust
the hole length. Let's just remove ext4_ext_put_gap_in_cache(), handle
delalloc and insert adjusted hole extent in ext4_ext_determine_hole().

Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20240127015825.1608160-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 fs/ext4/extents.c | 111 +++++++++++++++++++++++++++++-----------------
 1 file changed, 70 insertions(+), 41 deletions(-)

diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index d5efe076d3d3..e0b7e48c4c67 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -2229,7 +2229,7 @@ static int ext4_fill_es_cache_info(struct inode *inode,
 
 
 /*
- * ext4_ext_determine_hole - determine hole around given block
+ * ext4_ext_find_hole - find hole around given block according to the given path
  * @inode:	inode we lookup in
  * @path:	path in extent tree to @lblk
  * @lblk:	pointer to logical block around which we want to determine hole
@@ -2241,9 +2241,9 @@ static int ext4_fill_es_cache_info(struct inode *inode,
  * The function returns the length of a hole starting at @lblk. We update @lblk
  * to the beginning of the hole if we managed to find it.
  */
-static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
-					   struct ext4_ext_path *path,
-					   ext4_lblk_t *lblk)
+static ext4_lblk_t ext4_ext_find_hole(struct inode *inode,
+				      struct ext4_ext_path *path,
+				      ext4_lblk_t *lblk)
 {
 	int depth = ext_depth(inode);
 	struct ext4_extent *ex;
@@ -2270,30 +2270,6 @@ static ext4_lblk_t ext4_ext_determine_hole(struct inode *inode,
 	return len;
 }
 
-/*
- * ext4_ext_put_gap_in_cache:
- * calculate boundaries of the gap that the requested block fits into
- * and cache this gap
- */
-static void
-ext4_ext_put_gap_in_cache(struct inode *inode, ext4_lblk_t hole_start,
-			  ext4_lblk_t hole_len)
-{
-	struct extent_status es;
-
-	ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
-				  hole_start + hole_len - 1, &es);
-	if (es.es_len) {
-		/* There's delayed extent containing lblock? */
-		if (es.es_lblk <= hole_start)
-			return;
-		hole_len = min(es.es_lblk - hole_start, hole_len);
-	}
-	ext_debug(inode, " -> %u:%u\n", hole_start, hole_len);
-	ext4_es_insert_extent(inode, hole_start, hole_len, ~0,
-			      EXTENT_STATUS_HOLE);
-}
-
 /*
  * ext4_ext_rm_idx:
  * removes index from the index block.
@@ -4062,6 +4038,69 @@ static int get_implied_cluster_alloc(struct super_block *sb,
 	return 0;
 }
 
+/*
+ * Determine hole length around the given logical block, first try to
+ * locate and expand the hole from the given @path, and then adjust it
+ * if it's partially or completely converted to delayed extents, insert
+ * it into the extent cache tree if it's indeed a hole, finally return
+ * the length of the determined extent.
+ */
+static ext4_lblk_t ext4_ext_determine_insert_hole(struct inode *inode,
+						  struct ext4_ext_path *path,
+						  ext4_lblk_t lblk)
+{
+	ext4_lblk_t hole_start, len;
+	struct extent_status es;
+
+	hole_start = lblk;
+	len = ext4_ext_find_hole(inode, path, &hole_start);
+again:
+	ext4_es_find_extent_range(inode, &ext4_es_is_delayed, hole_start,
+				  hole_start + len - 1, &es);
+	if (!es.es_len)
+		goto insert_hole;
+
+	/*
+	 * There's a delalloc extent in the hole, handle it if the delalloc
+	 * extent is in front of, behind and straddle the queried range.
+	 */
+	if (lblk >= es.es_lblk + es.es_len) {
+		/*
+		 * The delalloc extent is in front of the queried range,
+		 * find again from the queried start block.
+		 */
+		len -= lblk - hole_start;
+		hole_start = lblk;
+		goto again;
+	} else if (in_range(lblk, es.es_lblk, es.es_len)) {
+		/*
+		 * The delalloc extent containing lblk, it must have been
+		 * added after ext4_map_blocks() checked the extent status
+		 * tree, adjust the length to the delalloc extent's after
+		 * lblk.
+		 */
+		len = es.es_lblk + es.es_len - lblk;
+		return len;
+	} else {
+		/*
+		 * The delalloc extent is partially or completely behind
+		 * the queried range, update hole length until the
+		 * beginning of the delalloc extent.
+		 */
+		len = min(es.es_lblk - hole_start, len);
+	}
+
+insert_hole:
+	/* Put just found gap into cache to speed up subsequent requests */
+	ext_debug(inode, " -> %u:%u\n", hole_start, len);
+	ext4_es_insert_extent(inode, hole_start, len, ~0, EXTENT_STATUS_HOLE);
+
+	/* Update hole_len to reflect hole size after lblk */
+	if (hole_start != lblk)
+		len -= lblk - hole_start;
+
+	return len;
+}
 
 /*
  * Block allocation/map/preallocation routine for extents based files
@@ -4179,22 +4218,12 @@ int ext4_ext_map_blocks(handle_t *handle, struct inode *inode,
 	 * we couldn't try to create block if create flag is zero
 	 */
 	if ((flags & EXT4_GET_BLOCKS_CREATE) == 0) {
-		ext4_lblk_t hole_start, hole_len;
+		ext4_lblk_t len;
 
-		hole_start = map->m_lblk;
-		hole_len = ext4_ext_determine_hole(inode, path, &hole_start);
-		/*
-		 * put just found gap into cache to speed up
-		 * subsequent requests
-		 */
-		ext4_ext_put_gap_in_cache(inode, hole_start, hole_len);
+		len = ext4_ext_determine_insert_hole(inode, path, map->m_lblk);
 
-		/* Update hole_len to reflect hole size after map->m_lblk */
-		if (hole_start != map->m_lblk)
-			hole_len -= map->m_lblk - hole_start;
 		map->m_pblk = 0;
-		map->m_len = min_t(unsigned int, map->m_len, hole_len);
-
+		map->m_len = min_t(unsigned int, map->m_len, len);
 		goto out;
 	}
 
-- 
2.43.0

[PATCH AUTOSEL 6.7 44/44] Input: i8042 - add Fujitsu Lifebook U728 to i8042 quirk table

[Sasha Levin]

From: Szilard Fabian <szfabian@bluemarch.art>

[ Upstream commit 4255447ad34c5c3785fcdcf76cfa0271d6e5ed39 ]

Another Fujitsu-related patch.

In the initial boot stage the integrated keyboard of Fujitsu Lifebook U728
refuses to work and it's not possible to type for example a dm-crypt
passphrase without the help of an external keyboard.

i8042.nomux kernel parameter resolves this issue but using that a PS/2
mouse is detected. This input device is unused even when the i2c-hid-acpi
kernel module is blacklisted making the integrated ELAN touchpad
(04F3:3092) not working at all.

So this notebook uses a hid-over-i2c touchpad which is managed by the
i2c_designware input driver. Since you can't find a PS/2 mouse port on this
computer and you can't connect a PS/2 mouse to it even with an official
port replicator I think it's safe to not use the PS/2 mouse port at all.

Signed-off-by: Szilard Fabian <szfabian@bluemarch.art>
Link: https://lore.kernel.org/r/20240103014717.127307-2-szfabian@bluemarch.art
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h
index b585b1dab870..2fd056ebce1c 100644
--- a/drivers/input/serio/i8042-acpipnpio.h
+++ b/drivers/input/serio/i8042-acpipnpio.h
@@ -634,6 +634,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = {
 		},
 		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
 	},
+	{
+		/* Fujitsu Lifebook U728 */
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK U728"),
+		},
+		.driver_data = (void *)(SERIO_QUIRK_NOAUX)
+	},
 	{
 		/* Gigabyte M912 */
 		.matches = {
-- 
2.43.0