All of lore.kernel.org
 help / color / mirror / Atom feed
From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Wadim Egorov <w.egorov@phytec.de>,
	Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v2 5/9] arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
Date: Mon, 12 Feb 2024 18:24:12 -0600	[thread overview]
Message-ID: <20240213002416.1560357-6-jm@ti.com> (raw)
In-Reply-To: <20240213002416.1560357-1-jm@ti.com>

Add OTAP/ITAP values to enable HS400 timing for MMC0 and
SDR104 timing for MMC1/MMC2. Remove no-1-8-v property to
enable the highest speed mode possible.

Update MMC OTAP/ITAP values according to the datasheet
[0], refer to Table 7-79 for MMC0 and Table 7-97 for MMC1/MMC2.

[0] https://www.ti.com/lit/ds/symlink/am62p.pdf

Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 +++++++++++++++++++++--
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts   |  1 -
 2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index ef1c982a90d8..e43530beb79f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -534,7 +534,21 @@ sdhci0: mmc@fa10000 {
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 2>;
 		assigned-clock-parents = <&k3_clks 57 4>;
-		ti,otap-del-sel-legacy = <0x0>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		ti,otap-del-sel-legacy = <0x1>;
+		ti,otap-del-sel-mmc-hs = <0x1>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -545,7 +559,19 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -556,7 +582,19 @@ sdhci2: mmc@fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 95a0146279b1..8c73587b0b62 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -424,7 +424,6 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 	bootph-all;
 };
 
-- 
2.43.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Judith Mendez <jm@ti.com>
To: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Conor Dooley <conor+dt@kernel.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
	Tero Kristo <kristo@kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	Wadim Egorov <w.egorov@phytec.de>,
	Francesco Dolcini <francesco.dolcini@toradex.com>
Subject: [PATCH v2 5/9] arm64: dts: ti: k3-am62p: Add ITAP/OTAP values for MMC
Date: Mon, 12 Feb 2024 18:24:12 -0600	[thread overview]
Message-ID: <20240213002416.1560357-6-jm@ti.com> (raw)
In-Reply-To: <20240213002416.1560357-1-jm@ti.com>

Add OTAP/ITAP values to enable HS400 timing for MMC0 and
SDR104 timing for MMC1/MMC2. Remove no-1-8-v property to
enable the highest speed mode possible.

Update MMC OTAP/ITAP values according to the datasheet
[0], refer to Table 7-79 for MMC0 and Table 7-97 for MMC1/MMC2.

[0] https://www.ti.com/lit/ds/symlink/am62p.pdf

Signed-off-by: Judith Mendez <jm@ti.com>
---
 arch/arm64/boot/dts/ti/k3-am62p-main.dtsi | 44 +++++++++++++++++++++--
 arch/arm64/boot/dts/ti/k3-am62p5-sk.dts   |  1 -
 2 files changed, 41 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index ef1c982a90d8..e43530beb79f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -534,7 +534,21 @@ sdhci0: mmc@fa10000 {
 		clock-names = "clk_ahb", "clk_xin";
 		assigned-clocks = <&k3_clks 57 2>;
 		assigned-clock-parents = <&k3_clks 57 4>;
-		ti,otap-del-sel-legacy = <0x0>;
+		bus-width = <8>;
+		mmc-ddr-1_8v;
+		mmc-hs200-1_8v;
+		mmc-hs400-1_8v;
+		ti,clkbuf-sel = <0x7>;
+		ti,strobe-sel = <0x77>;
+		ti,trm-icp = <0x8>;
+		ti,otap-del-sel-legacy = <0x1>;
+		ti,otap-del-sel-mmc-hs = <0x1>;
+		ti,otap-del-sel-ddr52 = <0x6>;
+		ti,otap-del-sel-hs200 = <0x8>;
+		ti,otap-del-sel-hs400 = <0x5>;
+		ti,itap-del-sel-legacy = <0x10>;
+		ti,itap-del-sel-mmc-hs = <0xa>;
+		ti,itap-del-sel-ddr52 = <0x3>;
 		status = "disabled";
 	};
 
@@ -545,7 +559,19 @@ sdhci1: mmc@fa00000 {
 		power-domains = <&k3_pds 58 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 58 5>, <&k3_clks 58 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
@@ -556,7 +582,19 @@ sdhci2: mmc@fa20000 {
 		power-domains = <&k3_pds 184 TI_SCI_PD_EXCLUSIVE>;
 		clocks = <&k3_clks 184 5>, <&k3_clks 184 6>;
 		clock-names = "clk_ahb", "clk_xin";
-		ti,otap-del-sel-legacy = <0x8>;
+		bus-width = <4>;
+		ti,clkbuf-sel = <0x7>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-sd-hs = <0x0>;
+		ti,otap-del-sel-sdr12 = <0xf>;
+		ti,otap-del-sel-sdr25 = <0xf>;
+		ti,otap-del-sel-sdr50 = <0xc>;
+		ti,otap-del-sel-ddr50 = <0x9>;
+		ti,otap-del-sel-sdr104 = <0x6>;
+		ti,itap-del-sel-legacy = <0x0>;
+		ti,itap-del-sel-sd-hs = <0x0>;
+		ti,itap-del-sel-sdr12 = <0x0>;
+		ti,itap-del-sel-sdr25 = <0x0>;
 		status = "disabled";
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 95a0146279b1..8c73587b0b62 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -424,7 +424,6 @@ &sdhci1 {
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
-	no-1-8-v;
 	bootph-all;
 };
 
-- 
2.43.0


  parent reply	other threads:[~2024-02-13  0:24 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-02-13  0:24 [PATCH v2 0/9] Fix MMC properties on Sitara devices Judith Mendez
2024-02-13  0:24 ` Judith Mendez
2024-02-13  0:24 ` [PATCH v2 1/9] arm64: dts: ti: k3-am62a-main: Add sdhci0 instance Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  0:24 ` [PATCH v2 2/9] arm64: dts: ti: k3-am62a-main: Add sdhci2 instance Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  0:24 ` [PATCH v2 3/9] arm64: dts: ti: k3-am62a7-sk: Enable eMMC support Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  0:24 ` [PATCH v2 4/9] arm64: dts: ti: k3-am64-main: Fix ITAP/OTAP values for MMC Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  0:24 ` Judith Mendez [this message]
2024-02-13  0:24   ` [PATCH v2 5/9] arm64: dts: ti: k3-am62p: Add " Judith Mendez
2024-02-13  0:24 ` [PATCH v2 6/9] arm64: dts: ti: k3-am6*: Remove DLL properties for soft PHYs Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  5:26   ` Wadim Egorov
2024-02-13  5:26     ` Wadim Egorov
2024-02-13 15:52     ` Judith Mendez
2024-02-13 15:52       ` Judith Mendez
2024-02-13 16:06       ` Judith Mendez
2024-02-13 16:06         ` Judith Mendez
2024-02-13  8:15   ` Francesco Dolcini
2024-02-13  8:15     ` Francesco Dolcini
2024-02-13  0:24 ` [PATCH v2 7/9] arm64: dts: ti: k3-am6*: Fix ti,clkbuf-sel property in MMC nodes Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  0:24 ` [PATCH v2 8/9] arm64: dts: ti: k3-am6*: Fix bus-width " Judith Mendez
2024-02-13  0:24   ` Judith Mendez
2024-02-13  5:07   ` Wadim Egorov
2024-02-13  5:07     ` Wadim Egorov
2024-02-13  8:19     ` Francesco Dolcini
2024-02-13  8:19       ` Francesco Dolcini
2024-02-13  9:05       ` Wadim Egorov
2024-02-13  9:05         ` Wadim Egorov
2024-02-13  0:24 ` [PATCH v2 9/9] arm64: dts: ti: k3-am6*: Add bootph-all property in MMC node Judith Mendez
2024-02-13  0:24   ` Judith Mendez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240213002416.1560357-6-jm@ti.com \
    --to=jm@ti.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=francesco.dolcini@toradex.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=vigneshr@ti.com \
    --cc=w.egorov@phytec.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.