All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Eichenberger <eichest@gmail.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, francesco.dolcini@toradex.com,
	Stefan Eichenberger <stefan.eichenberger@toradex.com>
Subject: [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
Date: Fri,  1 Mar 2024 09:49:01 +0100	[thread overview]
Message-ID: <20240301084901.16656-3-eichest@gmail.com> (raw)
In-Reply-To: <20240301084901.16656-1-eichest@gmail.com>

From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding a new regulator
for the USB hub that can be turned off when the system is suspended.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
---
 .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index bf6d27e70bc4..bb066e726527 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -43,6 +43,15 @@ simple-audio-card,cpu {
 			sound-dai = <&mcasp0>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
 };
 
 /* Verdin ETHs */
@@ -183,6 +192,11 @@ &ospi0 {
 	status = "okay";
 };
 
+/* Do not force CTRL_SLEEP_MOCI# always enabled */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin SD_1 */
 &sdhci1 {
 	ti,driver-strength-ohm = <33>;
@@ -204,7 +218,15 @@ &usbss1 {
 };
 
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */
-- 
2.40.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Stefan Eichenberger <eichest@gmail.com>
To: nm@ti.com, vigneshr@ti.com, kristo@kernel.org,
	robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	conor+dt@kernel.org
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, francesco.dolcini@toradex.com,
	Stefan Eichenberger <stefan.eichenberger@toradex.com>
Subject: [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci
Date: Fri,  1 Mar 2024 09:49:01 +0100	[thread overview]
Message-ID: <20240301084901.16656-3-eichest@gmail.com> (raw)
In-Reply-To: <20240301084901.16656-1-eichest@gmail.com>

From: Stefan Eichenberger <stefan.eichenberger@toradex.com>

Previously, we had the sleep-moci pin set to always on. However, the
Dahlia carrier board supports disabling the sleep-moci when the system
is suspended to power down peripherals that support it. This reduces
overall power consumption. This commit adds support for this feature by
disabling the reg_force_sleep_moci regulator and adding a new regulator
for the USB hub that can be turned off when the system is suspended.

Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
---
 .../boot/dts/ti/k3-am62-verdin-dahlia.dtsi    | 22 +++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
index bf6d27e70bc4..bb066e726527 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin-dahlia.dtsi
@@ -43,6 +43,15 @@ simple-audio-card,cpu {
 			sound-dai = <&mcasp0>;
 		};
 	};
+
+	reg_usb_hub: regulator-usb-hub {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
+		gpio = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		regulator-boot-on;
+		regulator-name = "HUB_PWR_EN";
+	};
 };
 
 /* Verdin ETHs */
@@ -183,6 +192,11 @@ &ospi0 {
 	status = "okay";
 };
 
+/* Do not force CTRL_SLEEP_MOCI# always enabled */
+&reg_force_sleep_moci {
+	status = "disabled";
+};
+
 /* Verdin SD_1 */
 &sdhci1 {
 	ti,driver-strength-ohm = <33>;
@@ -204,7 +218,15 @@ &usbss1 {
 };
 
 &usb1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	usb-hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		vdd-supply = <&reg_usb_hub>;
+	};
 };
 
 /* Verdin CTRL_WAKE1_MICO# */
-- 
2.40.1


  parent reply	other threads:[~2024-03-01  8:49 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-01  8:48 [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support Stefan Eichenberger
2024-03-01  8:48 ` Stefan Eichenberger
2024-03-01  8:49 ` [PATCH v1 1/2] arm64: dts: ti: k3-am62-verdin: replace sleep-moci hog with regulator Stefan Eichenberger
2024-03-01  8:49   ` Stefan Eichenberger
2024-03-01  9:00   ` Francesco Dolcini
2024-03-01  9:00     ` Francesco Dolcini
2024-03-01  8:49 ` Stefan Eichenberger [this message]
2024-03-01  8:49   ` [PATCH v1 2/2] arm64: dts: ti: k3-am62-verdin-dahlia: support sleep-moci Stefan Eichenberger
2024-03-01  9:00   ` Francesco Dolcini
2024-03-01  9:00     ` Francesco Dolcini
2024-04-17  7:53 ` [PATCH v1 0/2] arm64: dts: ti: k3-am62-verdin: add sleep-moci support Francesco Dolcini
2024-04-17  7:53   ` Francesco Dolcini
2024-04-26 22:42 ` Nishanth Menon
2024-04-26 22:42   ` Nishanth Menon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240301084901.16656-3-eichest@gmail.com \
    --to=eichest@gmail.com \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=francesco.dolcini@toradex.com \
    --cc=kristo@kernel.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=stefan.eichenberger@toradex.com \
    --cc=vigneshr@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.