From: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
To: <nifan.cxl@gmail.com>
Cc: <qemu-devel@nongnu.org>, <linux-cxl@vger.kernel.org>,
<gregory.price@memverge.com>, <ira.weiny@intel.com>,
<dan.j.williams@intel.com>, <a.manzanares@samsung.com>,
<dave@stgolabs.net>, <nmtadam.samsung@gmail.com>,
<jim.harris@samsung.com>, Fan Ni <fan.ni@samsung.com>
Subject: Re: [PATCH v2] hw/cxl/cxl-mailbox-utils: remove unneeded mailbox output payload space zeroing
Date: Wed, 6 Mar 2024 15:06:03 +0000 [thread overview]
Message-ID: <20240306150603.0000207e@Huawei.com> (raw)
In-Reply-To: <20240221221824.1092966-1-nifan.cxl@gmail.com>
On Wed, 21 Feb 2024 14:18:11 -0800
nifan.cxl@gmail.com wrote:
> From: Fan Ni <fan.ni@samsung.com>
>
> The whole mailbox output payload space is already zeroed after copying
> out the input payload, which happens before processing the specific mailbox
> command:
> https://elixir.bootlin.com/qemu/v8.2.1/source/hw/cxl/cxl-device-utils.c#L204
>
> Signed-off-by: Fan Ni <fan.ni@samsung.com>
Good point.
I've applied this to my local tree - not rushing on this one.
Jonathan
> ---
> hw/cxl/cxl-mailbox-utils.c | 7 -------
> 1 file changed, 7 deletions(-)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index e5eb97cb91..fda88470a3 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -226,7 +226,6 @@ static CXLRetCode cmd_events_get_records(const struct cxl_cmd *cmd,
> log_type = payload_in[0];
>
> pl = (CXLGetEventPayload *)payload_out;
> - memset(pl, 0, sizeof(*pl));
>
> max_recs = (cxlds->payload_size - CXL_EVENT_PAYLOAD_HDR_SIZE) /
> CXL_EVENT_RECORD_SIZE;
> @@ -264,7 +263,6 @@ static CXLRetCode cmd_events_get_interrupt_policy(const struct cxl_cmd *cmd,
> CXLEventLog *log;
>
> policy = (CXLEventInterruptPolicy *)payload_out;
> - memset(policy, 0, sizeof(*policy));
>
> log = &cxlds->event_logs[CXL_EVENT_TYPE_INFO];
> if (log->irq_enabled) {
> @@ -363,7 +361,6 @@ static CXLRetCode cmd_infostat_identify(const struct cxl_cmd *cmd,
> QEMU_BUILD_BUG_ON(sizeof(*is_identify) != 18);
>
> is_identify = (void *)payload_out;
> - memset(is_identify, 0, sizeof(*is_identify));
> is_identify->pcie_vid = class->vendor_id;
> is_identify->pcie_did = class->device_id;
> if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_USP)) {
> @@ -597,7 +594,6 @@ static CXLRetCode cmd_infostat_bg_op_sts(const struct cxl_cmd *cmd,
> QEMU_BUILD_BUG_ON(sizeof(*bg_op_status) != 8);
>
> bg_op_status = (void *)payload_out;
> - memset(bg_op_status, 0, sizeof(*bg_op_status));
> bg_op_status->status = cci->bg.complete_pct << 1;
> if (cci->bg.runtime > 0) {
> bg_op_status->status |= 1U << 0;
> @@ -636,7 +632,6 @@ static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd,
> }
>
> fw_info = (void *)payload_out;
> - memset(fw_info, 0, sizeof(*fw_info));
>
> fw_info->slots_supported = 2;
> fw_info->slot_info = BIT(0) | BIT(3);
> @@ -792,7 +787,6 @@ static CXLRetCode cmd_identify_memory_device(const struct cxl_cmd *cmd,
> }
>
> id = (void *)payload_out;
> - memset(id, 0, sizeof(*id));
>
> snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
>
> @@ -1079,7 +1073,6 @@ static CXLRetCode cmd_media_get_poison_list(const struct cxl_cmd *cmd,
> out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
> assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
>
> - memset(out, 0, out_pl_len);
> QLIST_FOREACH(ent, poison_list, node) {
> uint64_t start, stop;
>
WARNING: multiple messages have this Message-ID (diff)
From: Jonathan Cameron via <qemu-devel@nongnu.org>
To: <nifan.cxl@gmail.com>
Cc: <qemu-devel@nongnu.org>, <linux-cxl@vger.kernel.org>,
<gregory.price@memverge.com>, <ira.weiny@intel.com>,
<dan.j.williams@intel.com>, <a.manzanares@samsung.com>,
<dave@stgolabs.net>, <nmtadam.samsung@gmail.com>,
<jim.harris@samsung.com>, Fan Ni <fan.ni@samsung.com>
Subject: Re: [PATCH v2] hw/cxl/cxl-mailbox-utils: remove unneeded mailbox output payload space zeroing
Date: Wed, 6 Mar 2024 15:06:03 +0000 [thread overview]
Message-ID: <20240306150603.0000207e@Huawei.com> (raw)
In-Reply-To: <20240221221824.1092966-1-nifan.cxl@gmail.com>
On Wed, 21 Feb 2024 14:18:11 -0800
nifan.cxl@gmail.com wrote:
> From: Fan Ni <fan.ni@samsung.com>
>
> The whole mailbox output payload space is already zeroed after copying
> out the input payload, which happens before processing the specific mailbox
> command:
> https://elixir.bootlin.com/qemu/v8.2.1/source/hw/cxl/cxl-device-utils.c#L204
>
> Signed-off-by: Fan Ni <fan.ni@samsung.com>
Good point.
I've applied this to my local tree - not rushing on this one.
Jonathan
> ---
> hw/cxl/cxl-mailbox-utils.c | 7 -------
> 1 file changed, 7 deletions(-)
>
> diff --git a/hw/cxl/cxl-mailbox-utils.c b/hw/cxl/cxl-mailbox-utils.c
> index e5eb97cb91..fda88470a3 100644
> --- a/hw/cxl/cxl-mailbox-utils.c
> +++ b/hw/cxl/cxl-mailbox-utils.c
> @@ -226,7 +226,6 @@ static CXLRetCode cmd_events_get_records(const struct cxl_cmd *cmd,
> log_type = payload_in[0];
>
> pl = (CXLGetEventPayload *)payload_out;
> - memset(pl, 0, sizeof(*pl));
>
> max_recs = (cxlds->payload_size - CXL_EVENT_PAYLOAD_HDR_SIZE) /
> CXL_EVENT_RECORD_SIZE;
> @@ -264,7 +263,6 @@ static CXLRetCode cmd_events_get_interrupt_policy(const struct cxl_cmd *cmd,
> CXLEventLog *log;
>
> policy = (CXLEventInterruptPolicy *)payload_out;
> - memset(policy, 0, sizeof(*policy));
>
> log = &cxlds->event_logs[CXL_EVENT_TYPE_INFO];
> if (log->irq_enabled) {
> @@ -363,7 +361,6 @@ static CXLRetCode cmd_infostat_identify(const struct cxl_cmd *cmd,
> QEMU_BUILD_BUG_ON(sizeof(*is_identify) != 18);
>
> is_identify = (void *)payload_out;
> - memset(is_identify, 0, sizeof(*is_identify));
> is_identify->pcie_vid = class->vendor_id;
> is_identify->pcie_did = class->device_id;
> if (object_dynamic_cast(OBJECT(cci->d), TYPE_CXL_USP)) {
> @@ -597,7 +594,6 @@ static CXLRetCode cmd_infostat_bg_op_sts(const struct cxl_cmd *cmd,
> QEMU_BUILD_BUG_ON(sizeof(*bg_op_status) != 8);
>
> bg_op_status = (void *)payload_out;
> - memset(bg_op_status, 0, sizeof(*bg_op_status));
> bg_op_status->status = cci->bg.complete_pct << 1;
> if (cci->bg.runtime > 0) {
> bg_op_status->status |= 1U << 0;
> @@ -636,7 +632,6 @@ static CXLRetCode cmd_firmware_update_get_info(const struct cxl_cmd *cmd,
> }
>
> fw_info = (void *)payload_out;
> - memset(fw_info, 0, sizeof(*fw_info));
>
> fw_info->slots_supported = 2;
> fw_info->slot_info = BIT(0) | BIT(3);
> @@ -792,7 +787,6 @@ static CXLRetCode cmd_identify_memory_device(const struct cxl_cmd *cmd,
> }
>
> id = (void *)payload_out;
> - memset(id, 0, sizeof(*id));
>
> snprintf(id->fw_revision, 0x10, "BWFW VERSION %02d", 0);
>
> @@ -1079,7 +1073,6 @@ static CXLRetCode cmd_media_get_poison_list(const struct cxl_cmd *cmd,
> out_pl_len = sizeof(*out) + record_count * sizeof(out->records[0]);
> assert(out_pl_len <= CXL_MAILBOX_MAX_PAYLOAD_SIZE);
>
> - memset(out, 0, out_pl_len);
> QLIST_FOREACH(ent, poison_list, node) {
> uint64_t start, stop;
>
next prev parent reply other threads:[~2024-03-06 15:06 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-02-21 22:18 [PATCH v2] hw/cxl/cxl-mailbox-utils: remove unneeded mailbox output payload space zeroing nifan.cxl
2024-03-06 15:06 ` Jonathan Cameron [this message]
2024-03-06 15:06 ` Jonathan Cameron via
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240306150603.0000207e@Huawei.com \
--to=jonathan.cameron@huawei.com \
--cc=a.manzanares@samsung.com \
--cc=dan.j.williams@intel.com \
--cc=dave@stgolabs.net \
--cc=fan.ni@samsung.com \
--cc=gregory.price@memverge.com \
--cc=ira.weiny@intel.com \
--cc=jim.harris@samsung.com \
--cc=linux-cxl@vger.kernel.org \
--cc=nifan.cxl@gmail.com \
--cc=nmtadam.samsung@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.